/**************************************************************************** * boards/arm/lpc31xx/olimex-lpc-h3131/tools/lpchdr.h * * Copyright (C) 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __BOARDS_ARM_LPC31XX_OLIMEX_LPC_H3131_TOOLS_LPCHDR_H #define __BOARDS_ARM_LPC31XX_OLIMEX_LPC_H3131_TOOLS_LPCHDR_H /**************************************************************************** * Included Files ****************************************************************************/ #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /**************************************************************************** * Public Types ****************************************************************************/ struct lpc31_header_s { /* OFFS DESCRIPTION */ uint32_t vector; /* 0x00 Valid ARM instruction. Usually this will be * a branch instruction to entry point of the * image. */ uint32_t magic; /* 0x04 This field is used by boot ROM to detect a * valid image header. This field should always * be set to 0x41676d69. */ uint32_t execution_crc32; /* 0x08 CRC32 value of execution part of the image. If * the ‘image_type’ is set to ‘0xA’, this field * is ignored by boot ROM. */ uint32_t Reserved0[4]; /* 0x0c-0x18: Should be zero. */ uint32_t imageType; /* 0x1c Specifies whether CRC check should be done * on the image or not: * 0xA – No CRC check required. * 0xB – Do CRC32 check on both header and * execution part of the image. */ uint32_t imageLength; /* 0x20 Total image length including header rounded * up to the nearest 512 byte boundary. In C * language the field can be computed as: * imageLength = (Actual length + 511) & ~0x1FF; */ uint32_t releaseID; /* 0x24 Release or version number of the image. Note, * this field is not used by boot ROM but is * provided to track the image versions. */ uint32_t buildTime; /* 0x28 Time (expressed in EPOC time format) at which * image is built. Note, this field is not used * by boot ROM but is provided to track the image * versions. */ uint32_t sbzBootParameter; /* 0x2c hould be zero. */ uint32_t cust_reserved[15]; /* 0x30-0x68: Reserved for customer use (60 bytes) */ uint32_t header_crc32; /* 0x6c CRC32 value of the header (bytes 0x00 to 0x6C * of the image). If the ‘image_type’ is set * to ‘0xA’, this field is ignored by boot ROM. */ uint32_t Reserved1[4]; /* 0x70-0x7c: Should be zero. */ /* 0x80 Start of program code (128Kb max). The final * image has to be padded to the nearest 512 * byte boundary */ }; /**************************************************************************** * Public data ****************************************************************************/ /**************************************************************************** * Public Functions ****************************************************************************/ extern uint32_t crc32part(const uint8_t *src, size_t len, uint32_t crc32val); extern uint32_t crc32(const uint8_t *src, size_t len); #endif /* __BOARDS_ARM_LPC31XX_OLIMEX_LPC_H3131_TOOLS_LPCHDR_H */