/**************************************************************************** * drivers/ioexpander/tca64xx.h * Supports the following parts: TCA6408, TCA6416, TCA6424 * * Copyright (C) 2016-2017 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * This header file derives, in part, from the Project Ara TCA64xx driver * which has this copyright: * * Copyright (c) 2014-2015 Google Inc. * All rights reserved. * Author: Patrick Titiano, Jean Pihet * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of the copyright holder nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include "tca64xx.h" #ifdef CONFIG_IOEXPANDER_TCA64XX /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #ifndef MAX # define MAX(a,b) (((a) > (b)) ? (a) : (b)) #endif #ifndef MIN # define MIN(a,b) (((a) < (b)) ? (a) : (b)) #endif /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* TCA64xx Helpers */ static void tca64_lock(FAR struct tca64_dev_s *priv); static FAR const struct tca64_part_s *tca64_getpart(FAR struct tca64_dev_s *priv); static uint8_t tca64_ngpios(FAR struct tca64_dev_s *priv); static uint8_t tca64_input_reg(FAR struct tca64_dev_s *priv, uint8_t pin); static uint8_t tca64_output_reg(FAR struct tca64_dev_s *priv, uint8_t pin); static uint8_t tca64_polarity_reg(FAR struct tca64_dev_s *priv, uint8_t pin); static uint8_t tca64_config_reg(FAR struct tca64_dev_s *priv, uint8_t pin); static int tca64_getreg(FAR struct tca64_dev_s *priv, uint8_t regaddr, FAR uint8_t *regval, unsigned int count); static int tca64_putreg(struct tca64_dev_s *priv, uint8_t regaddr, FAR uint8_t *regval, unsigned int count); /* I/O Expander Methods */ static int tca64_direction(FAR struct ioexpander_dev_s *dev, uint8_t pin, int dir); static int tca64_option(FAR struct ioexpander_dev_s *dev, uint8_t pin, int opt, void *regval); static int tca64_writepin(FAR struct ioexpander_dev_s *dev, uint8_t pin, bool value); static int tca64_readpin(FAR struct ioexpander_dev_s *dev, uint8_t pin, FAR bool *value); #ifdef CONFIG_IOEXPANDER_MULTIPIN static int tca64_multiwritepin(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count); static int tca64_multireadpin(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count); #endif #ifdef CONFIG_IOEXPANDER_INT_ENABLE static FAR void *tca64_attach(FAR struct ioexpander_dev_s *dev, ioe_pinset_t pinset, ioe_callback_t callback, FAR void *arg); static int tca64_detach(FAR struct ioexpander_dev_s *dev, FAR void *handle); #endif #ifdef CONFIG_TCA64XX_INT_ENABLE static void tca64_int_update(FAR struct tca64_dev_s *priv, ioe_pinset_t input, ioe_pinset_t mask); static void tca64_register_update(FAR struct tca64_dev_s *priv); static void tca64_irqworker(void *arg); static void tca64_interrupt(FAR void *arg); #ifdef CONFIG_TCA64XX_INT_POLL static void tca64_poll_expiry(int argc, wdparm_t arg1, ...); #endif #endif /**************************************************************************** * Private Data ****************************************************************************/ #ifndef CONFIG_TCA64XX_MULTIPLE /* If only a single device is supported, then the driver state structure may * as well be pre-allocated. */ static struct tca64_dev_s g_tca64; #endif /* I/O expander vtable */ static const struct ioexpander_ops_s g_tca64_ops = { tca64_direction, tca64_option, tca64_writepin, tca64_readpin, tca64_readpin #ifdef CONFIG_IOEXPANDER_MULTIPIN , tca64_multiwritepin , tca64_multireadpin , tca64_multireadpin #endif #ifdef CONFIG_IOEXPANDER_INT_ENABLE , tca64_attach , tca64_detach #endif }; /* TCA64 part data */ static const struct tca64_part_s g_tca64_parts[TCA64_NPARTS] = { { TCA6408_PART, MIN(TCA6408_NR_GPIOS, CONFIG_IOEXPANDER_NPINS), TCA6408_INPUT_REG, TCA6408_OUTPUT_REG, TCA6408_POLARITY_REG, TCA6408_CONFIG_REG, }, { TCA6416_PART, MIN(TCA6416_NR_GPIOS, CONFIG_IOEXPANDER_NPINS), TCA6416_INPUT0_REG, TCA6416_OUTPUT0_REG, TCA6416_POLARITY0_REG, TCA6416_CONFIG0_REG, }, { TCA6424_PART, MIN(TCA6424_NR_GPIOS, CONFIG_IOEXPANDER_NPINS), TCA6424_INPUT0_REG, TCA6424_OUTPUT0_REG, TCA6424_POLARITY0_REG, TCA6424_CONFIG0_REG, }, }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: tca64_lock * * Description: * Get exclusive access to the I/O Expander * ****************************************************************************/ static void tca64_lock(FAR struct tca64_dev_s *priv) { nxsem_wait_uninterruptible(&priv->exclsem); } #define tca64_unlock(p) nxsem_post(&(p)->exclsem) /**************************************************************************** * Name: tca64_getpart * * Description: * Look up information for the selected part * ****************************************************************************/ static FAR const struct tca64_part_s *tca64_getpart(FAR struct tca64_dev_s *priv) { DEBUGASSERT(priv != NULL && priv->config != NULL && priv->config->part < TCA64_NPARTS); return &g_tca64_parts[priv->config->part]; } /**************************************************************************** * Name: tca64_ngpios * * Description: * Return the number of GPIOs supported by the selected part * ****************************************************************************/ static uint8_t tca64_ngpios(FAR struct tca64_dev_s *priv) { FAR const struct tca64_part_s *part = tca64_getpart(priv); return part->tp_ngpios; } /**************************************************************************** * Name: tca64_input_reg * * Description: * Return the address of the input register for the specified pin. * ****************************************************************************/ static uint8_t tca64_input_reg(FAR struct tca64_dev_s *priv, uint8_t pin) { FAR const struct tca64_part_s *part = tca64_getpart(priv); uint8_t reg = part->tp_input; DEBUGASSERT(pin <= part->tp_ngpios); return reg + (pin >> 3); } /**************************************************************************** * Name: tca64_output_reg * * Description: * Return the address of the output register for the specified pin. * ****************************************************************************/ static uint8_t tca64_output_reg(FAR struct tca64_dev_s *priv, uint8_t pin) { FAR const struct tca64_part_s *part = tca64_getpart(priv); uint8_t reg = part->tp_output; DEBUGASSERT(pin <= part->tp_ngpios); return reg + (pin >> 3); } /**************************************************************************** * Name: tca64_polarity_reg * * Description: * Return the address of the polarity register for the specified pin. * ****************************************************************************/ static uint8_t tca64_polarity_reg(FAR struct tca64_dev_s *priv, uint8_t pin) { FAR const struct tca64_part_s *part = tca64_getpart(priv); uint8_t reg = part->tp_output; DEBUGASSERT(pin <= part->tp_ngpios); return reg + (pin >> 3); } /**************************************************************************** * Name: tca64_config_reg * * Description: * Return the address of the configuration register for the specified pin. * ****************************************************************************/ static uint8_t tca64_config_reg(FAR struct tca64_dev_s *priv, uint8_t pin) { FAR const struct tca64_part_s *part = tca64_getpart(priv); uint8_t reg = part->tp_config; DEBUGASSERT(pin <= part->tp_ngpios); return reg + (pin >> 3); } /**************************************************************************** * Name: tca64_getreg * * Description: * Read an 8-bit value from a TCA64xx register * ****************************************************************************/ static int tca64_getreg(FAR struct tca64_dev_s *priv, uint8_t regaddr, FAR uint8_t *regval, unsigned int count) { struct i2c_msg_s msg[2]; int ret; DEBUGASSERT(priv != NULL && priv->i2c != NULL && priv->config != NULL); /* Set up for the transfer */ msg[0].frequency = TCA64XX_I2C_MAXFREQUENCY, msg[0].addr = priv->config->address, msg[0].flags = 0, msg[0].buffer = ®addr, msg[0].length = 1, msg[1].frequency = TCA64XX_I2C_MAXFREQUENCY, msg[1].addr = priv->config->address, msg[1].flags = I2C_M_READ, msg[1].buffer = regval, msg[1].length = count, /* Perform the transfer */ ret = I2C_TRANSFER(priv->i2c, msg, 2); if (ret < 0) { gpioerr("ERROR: I2C addr=%02x regaddr=%02x: failed, ret=%d!\n", priv->config->address, regaddr, ret); return ret; } else { gpioinfo("I2C addr=%02x regaddr=%02x: read %02x\n", priv->config->address, regaddr, *regval); return OK; } } /**************************************************************************** * Name: tca64_putreg * * Description: * Write an 8-bit value to a TCA64xx register * ****************************************************************************/ static int tca64_putreg(struct tca64_dev_s *priv, uint8_t regaddr, FAR uint8_t *regval, unsigned int count) { struct i2c_msg_s msg[1]; uint8_t cmd[2]; int ret; int i; DEBUGASSERT(priv != NULL && priv->i2c != NULL && priv->config != NULL); /* Set up for the transfer */ cmd[0] = regaddr; for (i = 0; i < count; i++) { cmd[i+1] = regval[i]; } msg[0].frequency = TCA64XX_I2C_MAXFREQUENCY, msg[0].addr = priv->config->address, msg[0].flags = 0, msg[0].buffer = cmd, msg[0].length = count + 1, ret = I2C_TRANSFER(priv->i2c, msg, 1); if (ret < 0) { gpioerr("ERROR: claddr=%02x, regaddr=%02x: failed, ret=%d!\n", priv->config->address, regaddr, ret); return ret; } else { gpioinfo("claddr=%02x, regaddr=%02x, regval=%02x\n", priv->config->address, regaddr, regval); return OK; } } /**************************************************************************** * Name: tca64_direction * * Description: * Set the direction of an ioexpander pin. Required. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin to alter in this call * dir - One of the IOEXPANDER_DIRECTION_ macros * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int tca64_direction(FAR struct ioexpander_dev_s *dev, uint8_t pin, int direction) { FAR struct tca64_dev_s *priv = (FAR struct tca64_dev_s *)dev; uint8_t regaddr; uint8_t regval; int ret; DEBUGASSERT(priv != NULL && priv->config != NULL && pin < CONFIG_IOEXPANDER_NPINS && (direction == IOEXPANDER_DIRECTION_IN || direction == IOEXPANDER_DIRECTION_OUT)); gpioinfo("I2C addr=%02x pin=%u direction=%s\n", priv->config->address, pin, (direction == IOEXPANDER_DIRECTION_IN) ? "IN" : "OUT"); /* Get exclusive access to the I/O Expander */ tca64_lock(priv); /* Read the Configuration Register associated with this pin. The * Configuration Register configures the direction of the I/O pins. */ regaddr = tca64_config_reg(priv, pin); ret = tca64_getreg(priv, regaddr, ®val, 1); if (ret < 0) { gpioerr("ERROR: Failed to read config register at %u: %d\n", regaddr, ret); goto errout_with_lock; } /* Set the pin direction in the I/O Expander */ if (direction == IOEXPANDER_DIRECTION_IN) { /* Configure pin as input. If a bit in the configuration register is * set to 1, the corresponding port pin is enabled as an input with a * high-impedance output driver. */ regval |= (1 << (pin & 7)); } else /* if (direction == IOEXPANDER_DIRECTION_OUT) */ { /* Configure pin as output. If a bit in this register is cleared to * 0, the corresponding port pin is enabled as an output. * * REVISIT: The value of output has not been selected! This might * put a glitch on the output. */ regval &= ~(1 << (pin & 7)); } /* Write back the modified register content */ ret = tca64_putreg(priv, regaddr, ®val, 1); if (ret < 0) { gpioerr("ERROR: Failed to write config register at %u: %d\n", regaddr, ret); } errout_with_lock: tca64_unlock(priv); return ret; } /**************************************************************************** * Name: tca64_option * * Description: * Set pin options. Required. * Since all IO expanders have various pin options, this API allows setting * pin options in a flexible way. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin to alter in this call * opt - One of the IOEXPANDER_OPTION_ macros * val - The option's value * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int tca64_option(FAR struct ioexpander_dev_s *dev, uint8_t pin, int opt, FAR void *value) { FAR struct tca64_dev_s *priv = (FAR struct tca64_dev_s *)dev; int ret = -ENOSYS; DEBUGASSERT(priv != NULL && priv->config != NULL); gpioinfo("I2C addr=%02x pin=%u option=%u\n", priv->config->address, pin, opt); /* Check for pin polarity inversion. The Polarity Inversion Register * allows polarity inversion of pins defined as inputs by the * Configuration Register. If a bit in this register is set, the * corresponding port pin's polarity is inverted. If a bit in this * register is cleared, the corresponding port pin's original polarity * is retained. */ if (opt == IOEXPANDER_OPTION_INVERT) { unsigned int ival = (unsigned int)((uintptr_t)value); uint8_t regaddr; uint8_t polarity; /* Get exclusive access to the I/O Expander */ tca64_lock(priv); /* Read the polarity register */ regaddr = tca64_polarity_reg(priv, pin); ret = tca64_getreg(priv, regaddr, &polarity, 1); if (ret < 0) { gpioerr("ERROR: Failed to read polarity register at %u: %d\n", regaddr, ret); tca64_unlock(priv); return ret; } /* Set/clear the pin option */ if (ival == IOEXPANDER_OPTION_INVERT) { polarity |= (1 << (pin & 7)); } else { polarity &= ~(1 << (pin & 7)); } /* Write back the modified register */ ret = tca64_putreg(priv, regaddr, &polarity, 1); if (ret < 0) { gpioerr("ERROR: Failed to read polarity register at %u: %d\n", regaddr, ret); } tca64_unlock(priv); } #ifdef CONFIG_TCA64XX_INT_ENABLE /* Interrupt configuration */ else if (opt == IOEXPANDER_OPTION_INTCFG) { unsigned int ival = (unsigned int)((uintptr_t)value); ioe_pinset_t bit = ((ioe_pinset_t)1 << pin); ret = OK; tca64_lock(priv); switch (ival) { case IOEXPANDER_VAL_HIGH: /* Interrupt on high level */ priv->trigger &= ~bit; priv->level[0] |= bit; priv->level[1] &= ~bit; break; case IOEXPANDER_VAL_LOW: /* Interrupt on low level */ priv->trigger &= ~bit; priv->level[0] &= ~bit; priv->level[1] |= bit; break; case IOEXPANDER_VAL_RISING: /* Interrupt on rising edge */ priv->trigger |= bit; priv->level[0] |= bit; priv->level[1] &= ~bit; break; case IOEXPANDER_VAL_FALLING: /* Interrupt on falling edge */ priv->trigger |= bit; priv->level[0] &= ~bit; priv->level[1] |= bit; break; case IOEXPANDER_VAL_BOTH: /* Interrupt on both edges */ priv->trigger |= bit; priv->level[0] |= bit; priv->level[1] |= bit; break; case IOEXPANDER_VAL_DISABLE: break; default: ret = -EINVAL; } tca64_unlock(priv); } #endif return ret; } /**************************************************************************** * Name: tca64_writepin * * Description: * Set the pin level. Required. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin to alter in this call * val - The pin level. Usually TRUE will set the pin high, * except if OPTION_INVERT has been set on this pin. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int tca64_writepin(FAR struct ioexpander_dev_s *dev, uint8_t pin, bool value) { FAR struct tca64_dev_s *priv = (FAR struct tca64_dev_s *)dev; uint8_t regaddr; uint8_t regval; int ret; DEBUGASSERT(priv != NULL && priv->config != NULL && pin < CONFIG_IOEXPANDER_NPINS); gpioinfo("I2C addr=%02x pin=%u value=%u\n", priv->config->address, pin, value); /* Get exclusive access to the I/O Expander */ tca64_lock(priv); /* Read the output register. */ regaddr = tca64_output_reg(priv, pin); ret = tca64_getreg(priv, regaddr, ®val, 1); if (ret < 0) { gpioerr("ERROR: Failed to read output register at %u: %d\n", regaddr, ret); goto errout_with_lock; } /* Set output pins default value (before configuring it as output) The * Output Port Register shows the outgoing logic levels of the pins * defined as outputs by the Configuration Register. */ if (value != 0) { regval |= (1 << (pin & 7)); } else { regval &= ~(1 << (pin & 7)); } /* Write the modified output register value */ ret = tca64_putreg(priv, regaddr, ®val, 1); if (ret < 0) { gpioerr("ERROR: Failed to write output register at %u: %d\n", regaddr, ret); } errout_with_lock: tca64_unlock(priv); return ret; } /**************************************************************************** * Name: tca64_readpin * * Description: * Read the actual PIN level. This can be different from the last value written * to this pin. Required. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin * valptr - Pointer to a buffer where the pin level is stored. Usually TRUE * if the pin is high, except if OPTION_INVERT has been set on this pin. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int tca64_readpin(FAR struct ioexpander_dev_s *dev, uint8_t pin, FAR bool *value) { FAR struct tca64_dev_s *priv = (FAR struct tca64_dev_s *)dev; uint8_t regaddr; uint8_t regval; int ret; DEBUGASSERT(priv != NULL && priv->config != NULL && pin < CONFIG_IOEXPANDER_NPINS && value != NULL); gpioinfo("I2C addr=%02x, pin=%u\n", priv->config->address, pin); /* Get exclusive access to the I/O Expander */ tca64_lock(priv); /* Read the input register for this pin * * The Input Port Register reflects the incoming logic levels of the pins, * regardless of whether the pin is defined as an input or an output by * the Configuration Register. They act only on read operation. */ regaddr = tca64_input_reg(priv, pin); ret = tca64_getreg(priv, regaddr, ®val, 1); if (ret < 0) { gpioerr("ERROR: Failed to read input register at %u: %d\n", regaddr, ret); goto errout_with_lock; } #ifdef CONFIG_TCA64XX_INT_ENABLE /* Update the input status with the 8 bits read from the expander */ tca64_int_update(priv, (ioe_pinset_t)regval << (pin & ~7), (ioe_pinset_t)0xff << (pin & ~7)); #endif /* Return 0 or 1 to indicate the state of pin */ *value = (bool)((regval >> (pin & 7)) & 1); ret = OK; errout_with_lock: tca64_unlock(priv); return ret; } /**************************************************************************** * Name: tca64_multiwritepin * * Description: * Set the pin level for multiple pins. This routine may be faster than * individual pin accesses. Optional. * * Input Parameters: * dev - Device-specific state data * pins - The list of pin indexes to alter in this call * val - The list of pin levels. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ #ifdef CONFIG_IOEXPANDER_MULTIPIN static int tca64_multiwritepin(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count) { FAR struct tca64_dev_s *priv = (FAR struct tca64_dev_s *)dev; ioe_pinset_t pinset; uint8_t regaddr; uint8_t ngpios; uint8_t nregs; uint8_t pin; int ret; int i; /* Get exclusive access to the I/O Expander */ tca64_lock(priv); /* Read the output registers for pin 0 through the number of supported * pins. */ ngpios = tca64_ngpios(priv); nregs = (ngpios + 7) >> 3; pinset = 0; regaddr = tca64_output_reg(priv, 0); ret = tca64_getreg(priv, regaddr, (FAR uint8_t *)&pinset, nregs); if (ret < 0) { gpioerr("ERROR: Failed to read %u output registers at %u: %d\n", nregs, regaddr, ret); goto errout_with_lock; } /* Apply the user defined changes */ for (i = 0; i < count; i++) { pin = pins[i]; DEBUGASSERT(pin < CONFIG_IOEXPANDER_NPINS); if (values[i]) { pinset |= (1 << pin); } else { pinset &= ~(1 << pin); } } /* Now write back the new pins states */ ret = tca64_putreg(priv, regaddr, (FAR uint8_t *)&pinset, nregs); if (ret < 0) { gpioerr("ERROR: Failed to write %u output registers at %u: %d\n", nregs, regaddr, ret); } errout_with_lock: tca64_unlock(priv); return ret; } #endif /**************************************************************************** * Name: tca64_multireadpin * * Description: * Read the actual level for multiple pins. This routine may be faster than * individual pin accesses. Optional. * * Input Parameters: * dev - Device-specific state data * pin - The list of pin indexes to read * valptr - Pointer to a buffer where the pin levels are stored. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ #ifdef CONFIG_IOEXPANDER_MULTIPIN static int tca64_multireadpin(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count) { FAR struct tca64_dev_s *priv = (FAR struct tca64_dev_s *)dev; ioe_pinset_t pinset; uint8_t regaddr; uint8_t ngpios; uint8_t nregs; uint8_t pin; int ret; int i; DEBUGASSERT(priv != NULL && priv->config != NULL && pins != NULL && values != NULL && count > 0); gpioinfo("I2C addr=%02x, count=%u\n", priv->config->address, count); /* Get exclusive access to the I/O Expander */ tca64_lock(priv); /* Read the input register for pin 0 through the number of supported pins. * * The Input Port Register reflects the incoming logic levels of the pins, * regardless of whether the pin is defined as an input or an output by * the Configuration Register. They act only on read operation. */ ngpios = tca64_ngpios(priv); nregs = (ngpios + 7) >> 3; pinset = 0; regaddr = tca64_input_reg(priv, 0); ret = tca64_getreg(priv, regaddr, (FAR uint8_t *)&pinset, nregs); if (ret < 0) { gpioerr("ERROR: Failed to read input %u registers at %u: %d\n", nregs, regaddr, ret); goto errout_with_lock; } /* Update the input status with the 8 bits read from the expander */ for (i = 0; i < count; i++) { pin = pins[i]; DEBUGASSERT(pin < CONFIG_IOEXPANDER_NPINS); values[i] = ((pinset & (1 << pin)) != 0); } #ifdef CONFIG_TCA64XX_INT_ENABLE /* Update the input status with the 32 bits read from the expander */ tca64_int_update(priv, pinset, PINSET_ALL); #endif errout_with_lock: tca64_unlock(priv); return ret; } #endif /**************************************************************************** * Name: tca64_attach * * Description: * Attach and enable a pin interrupt callback function. * * Input Parameters: * dev - Device-specific state data * pinset - The set of pin events that will generate the callback * callback - The pointer to callback function. NULL will detach the * callback. * arg - User-provided callback argument * * Returned Value: * A non-NULL handle value is returned on success. This handle may be * used later to detach and disable the pin interrupt. * ****************************************************************************/ #ifdef CONFIG_TCA64XX_INT_ENABLE static FAR void *tca64_attach(FAR struct ioexpander_dev_s *dev, ioe_pinset_t pinset, ioe_callback_t callback, FAR void *arg) { FAR struct tca64_dev_s *priv = (FAR struct tca64_dev_s *)dev; FAR void *handle = NULL; int i; /* Get exclusive access to the I/O Expander */ tca64_lock(priv); /* Find and available in entry in the callback table */ for (i = 0; i < CONFIG_TCA64XX_INT_NCALLBACKS; i++) { /* Is this entry available (i.e., no callback attached) */ if (priv->cb[i].cbfunc == NULL) { /* Yes.. use this entry */ priv->cb[i].pinset = pinset; priv->cb[i].cbfunc = callback; priv->cb[i].cbarg = arg; handle = &priv->cb[i]; break; } } tca64_unlock(priv); return handle; } /**************************************************************************** * Name: tca64_detach * * Description: * Detach and disable a pin interrupt callback function. * * Input Parameters: * dev - Device-specific state data * handle - The non-NULL opaque value return by tca64_attch() * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int tca64_detach(FAR struct ioexpander_dev_s *dev, FAR void *handle) { FAR struct tca64_dev_s *priv = (FAR struct tca64_dev_s *)dev; FAR struct tca64_callback_s *cb = (FAR struct tca64_callback_s *)handle; DEBUGASSERT(priv != NULL && cb != NULL); DEBUGASSERT((uintptr_t)cb >= (uintptr_t)&priv->cb[0] && (uintptr_t)cb <= (uintptr_t)&priv->cb[CONFIG_TCA64XX_INT_NCALLBACKS-1]); UNUSED(priv); cb->pinset = 0; cb->cbfunc = NULL; cb->cbarg = NULL; return OK; } #endif /**************************************************************************** * Name: tca64_int_update * * Description: * Check for pending interrupts. * ****************************************************************************/ #ifdef CONFIG_TCA64XX_INT_ENABLE static void tca64_int_update(FAR struct tca64_dev_s *priv, ioe_pinset_t input, ioe_pinset_t mask) { ioe_pinset_t diff; irqstate_t flags; int ngios = tca64_ngpios(priv); int pin; flags = enter_critical_section(); /* Check the changed bits from last read */ input = (priv->input & ~mask) | (input & mask); diff = priv->input ^ input; priv->input = input; /* TCA64XX doesn't support irq trigger, we have to do this in software. */ for (pin = 0; pin < ngios; pin++) { if (TCA64_EDGE_SENSITIVE(priv, pin)) { /* Edge triggered. Was there a change in the level? */ if ((diff & 1) != 0) { /* Set interrupt as a function of edge type */ if (((input & 1) == 0 && TCA64_EDGE_FALLING(priv, pin)) || ((input & 1) != 0 && TCA64_EDGE_RISING(priv, pin))) { priv->intstat |= 1 << pin; } } } else /* if (TCA64_LEVEL_SENSITIVE(priv, pin)) */ { /* Level triggered. Set intstat bit if match in level type. */ if (((input & 1) != 0 && TCA64_LEVEL_HIGH(priv, pin)) || ((input & 1) == 0 && TCA64_LEVEL_LOW(priv, pin))) { priv->intstat |= 1 << pin; } } diff >>= 1; input >>= 1; } leave_critical_section(flags); } #endif /**************************************************************************** * Name: tc64_update_registers * * Description: * Read all pin states and update pending interrupts. * * Input Parameters: * dev - Device-specific state data * pins - The list of pin indexes to alter in this call * val - The list of pin levels. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ #ifdef CONFIG_TCA64XX_INT_ENABLE static void tca64_register_update(FAR struct tca64_dev_s *priv) { ioe_pinset_t pinset; uint8_t regaddr; uint8_t ngpios; uint8_t nregs; int ret; /* Read the input register for pin 0 through the number of supported pins. * * The Input Port Register reflects the incoming logic levels of the pins, * regardless of whether the pin is defined as an input or an output by * the Configuration Register. They act only on read operation. */ ngpios = tca64_ngpios(priv); nregs = (ngpios + 7) >> 3; pinset = 0; regaddr = tca64_input_reg(priv, 0); ret = tca64_getreg(priv, regaddr, (FAR uint8_t *)&pinset, nregs); if (ret < 0) { gpioerr("ERROR: Failed to read input %u registers at %u: %d\n", nregs, regaddr, ret); return; } /* Update the input status with the 32 bits read from the expander */ tca64_int_update(priv, pinset, PINSET_ALL); } #endif /**************************************************************************** * Name: tca64_irqworker * * Description: * Handle GPIO interrupt events (this function actually executes in the * context of the worker thread). * ****************************************************************************/ #ifdef CONFIG_TCA64XX_INT_ENABLE static void tca64_irqworker(void *arg) { FAR struct tca64_dev_s *priv = (FAR struct tca64_dev_s *)arg; ioe_pinset_t pinset; uint8_t regaddr; uint8_t ngpios; uint8_t nregs; int ret; int i; DEBUGASSERT(priv != NULL && priv->config != NULL); /* Get exclusive access to read inputs and assess pending interrupts. */ tca64_lock(priv); /* Read the input register for pin 0 through the number of supported pins. * * The Input Port Register reflects the incoming logic levels of the pins, * regardless of whether the pin is defined as an input or an output by * the Configuration Register. They act only on read operation. */ ngpios = tca64_ngpios(priv); nregs = (ngpios + 7) >> 3; pinset = 0; regaddr = tca64_input_reg(priv, 0); ret = tca64_getreg(priv, regaddr, (FAR uint8_t *)&pinset, nregs); if (ret < 0) { gpioerr("ERROR: Failed to read input %u registers at %u: %d\n", nregs, regaddr, ret); tca64_unlock(priv); goto errout_with_restart; } /* Update the input status with the 32 bits read from the expander */ tca64_int_update(priv, pinset, PINSET_ALL); /* Sample and clear the pending interrupts. */ pinset = priv->intstat; priv->intstat = 0; tca64_unlock(priv); /* Perform pin interrupt callbacks */ for (i = 0; i < CONFIG_TCA64XX_INT_NCALLBACKS; i++) { /* Is this entry valid (i.e., callback attached)? */ if (priv->cb[i].cbfunc != NULL) { /* Did any of the requested pin interrupts occur? */ ioe_pinset_t match = pinset & priv->cb[i].pinset; if (match != 0) { /* Yes.. perform the callback */ priv->cb[i].cbfunc(&priv->dev, match, priv->cb[i].cbarg); } } } errout_with_restart: #ifdef CONFIG_TCA64XX_INT_POLL /* Check for pending interrupts */ tca64_register_update(priv); /* Re-start the poll timer */ sched_lock(); ret = wd_start(priv->wdog, TCA64XX_POLLDELAY, (wdentry_t)tca64_poll_expiry, 1, (wdparm_t)priv); if (ret < 0) { gpioerr("ERROR: Failed to start poll timer\n"); } #endif /* Re-enable interrupts */ priv->config->enable(priv->config, true); #ifdef CONFIG_TCA64XX_INT_POLL sched_unlock(); #endif } #endif /**************************************************************************** * Name: tca64_interrupt * * Description: * Handle GPIO interrupt events (this function executes in the * context of the interrupt). * ****************************************************************************/ #ifdef CONFIG_TCA64XX_INT_ENABLE static void tca64_interrupt(FAR void *arg) { FAR struct tca64_dev_s *priv = (FAR struct tca64_dev_s *)arg; DEBUGASSERT(priv != NULL && priv->config != NULL); /* Defer interrupt processing to the worker thread. This is not only * much kinder in the use of system resources but is probably necessary * to access the I/O expander device. * * Notice that further GPIO interrupts are disabled until the work is * actually performed. This is to prevent overrun of the worker thread. * Interrupts are re-enabled in tca64_irqworker() when the work is * completed. */ if (work_available(&priv->work)) { #ifdef CONFIG_TCA64XX_INT_POLL /* Cancel the poll timer */ wd_cancel(priv->wdog); #endif /* Disable interrupts */ priv->config->enable(priv->config, false); /* Schedule interrupt related work on the high priority worker thread. */ work_queue(HPWORK, &priv->work, tca64_irqworker, (FAR void *)priv, 0); } } #endif /**************************************************************************** * Name: tca64_poll_expiry * * Description: * The poll timer has expired; check for missed interrupts * * Input Parameters: * Standard wdog expiration arguments. * ****************************************************************************/ #if defined(CONFIG_TCA64XX_INT_ENABLE) && defined(CONFIG_TCA64XX_INT_POLL) static void tca64_poll_expiry(int argc, wdparm_t arg1, ...) { FAR struct tca64_dev_s *priv; DEBUGASSERT(argc == 1); priv = (FAR struct tca64_dev_s *)arg1; DEBUGASSERT(priv != NULL && priv->config != NULL); /* Defer interrupt processing to the worker thread. This is not only * much kinder in the use of system resources but is probably necessary * to access the I/O expander device. * * Notice that further GPIO interrupts are disabled until the work is * actually performed. This is to prevent overrun of the worker thread. * Interrupts are re-enabled in tca64_irqworker() when the work is * completed. */ if (work_available(&priv->work)) { /* Disable interrupts */ priv->config->enable(priv->config, false); /* Schedule interrupt related work on the high priority worker thread. */ work_queue(HPWORK, &priv->work, tca64_irqworker, (FAR void *)priv, 0); } } #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: tca64_initialize * * Description: * Instantiate and configure the TCA64xx device driver to use the provided * I2C device instance. * * Input Parameters: * i2c - An I2C driver instance * minor - The device i2c address * config - Persistent board configuration data * * Returned Value: * an ioexpander_dev_s instance on success, NULL on failure. * ****************************************************************************/ FAR struct ioexpander_dev_s *tca64_initialize(FAR struct i2c_master_s *i2c, FAR struct tca64_config_s *config) { FAR struct tca64_dev_s *priv; int ret; #ifdef CONFIG_TCA64XX_MULTIPLE /* Allocate the device state structure */ priv = (FAR struct tca64_dev_s *)kmm_zalloc(sizeof(struct tca64_dev_s)); if (!priv) { gpioerr("ERROR: Failed to allocate driver instance\n"); return NULL; } #else /* Use the one-and-only I/O Expander driver instance */ priv = &g_tca64; #endif /* Initialize the device state structure */ priv->dev.ops = &g_tca64_ops; priv->i2c = i2c; priv->config = config; #ifdef CONFIG_TCA64XX_INT_ENABLE /* Initial interrupt state: Edge triggered on both edges */ priv->trigger = PINSET_ALL; /* All edge triggered */ priv->level[0] = PINSET_ALL; /* All rising edge */ priv->level[1] = PINSET_ALL; /* All falling edge */ #ifdef CONFIG_TCA64XX_INT_POLL /* Set up a timer to poll for missed interrupts */ priv->wdog = wd_create(); DEBUGASSERT(priv->wdog != NULL); ret = wd_start(priv->wdog, TCA64XX_POLLDELAY, (wdentry_t)tca64_poll_expiry, 1, (wdparm_t)priv); if (ret < 0) { gpioerr("ERROR: Failed to start poll timer\n"); } #endif /* Attach the I/O expander interrupt handler and enable interrupts */ priv->config->attach(config, tca64_interrupt, priv); priv->config->enable(config, true); #endif nxsem_init(&priv->exclsem, 0, 1); return &priv->dev; } #endif /* CONFIG_IOEXPANDER_TCA64XX */