/**************************************************************************** * drivers/sensors/apds9960.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /* Character driver for the APDS9960 Gesture Sensor * * This driver is based on APDS-9960 Arduino library developed by * Shawn Hymel from SparkFun Electronics and released under public * domain. */ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_APDS9960) /**************************************************************************** * Pre-process Definitions ****************************************************************************/ #ifndef CONFIG_APDS9960_I2C_FREQUENCY # define CONFIG_APDS9960_I2C_FREQUENCY 400000 #endif /**************************************************************************** * Private Types ****************************************************************************/ struct apds9960_dev_s { FAR struct apds9960_config_s *config; /* Hardware Configuration */ struct work_s work; /* Supports ISR "bottom half" */ struct gesture_data_s gesture_data; /* Gesture data container */ int gesture_ud_delta; /* UP/DOWN delta */ int gesture_lr_delta; /* LEFT/RIGHT delta */ int gesture_ud_count; /* UP/DOWN counter */ int gesture_lr_count; /* LEFT/RIGHT counter */ int gesture_near_count; /* Near distance counter */ int gesture_far_count; /* Far distance counter */ int gesture_state; /* Gesture machine state */ int gesture_motion; /* Gesture motion direction */ sem_t sample_sem; /* Semaphore for sample data */ }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* Reset gesture values */ static void apds9960_resetgesture(FAR struct apds9960_dev_s *priv); /* Setup default initial values */ static int apds9960_setdefault(FAR struct apds9960_dev_s *priv); /* Probe function to verify if sensor is present */ static int apds9960_probe(FAR struct apds9960_dev_s *priv); /* Work queue */ static void apds9960_worker(FAR void *arg); /* Gesture processing/decoding functions */ static int apds9960_readgesture(FAR struct apds9960_dev_s *priv); static bool apds9960_decodegesture(FAR struct apds9960_dev_s *priv); static bool apds9960_processgesture(FAR struct apds9960_dev_s *priv); static bool apds9960_isgestureavailable(FAR struct apds9960_dev_s *priv); /* I2C Helpers */ static int apds9960_i2c_read(FAR struct apds9960_dev_s *priv, uint8_t const regaddr, FAR uint8_t *regval, int len); static int apds9960_i2c_read8(FAR struct apds9960_dev_s *priv, uint8_t const regaddr, FAR uint8_t *regval); static int apds9960_i2c_write(FAR struct apds9960_dev_s *priv, uint8_t const *data, int len); static int apds9960_i2c_write8(FAR struct apds9960_dev_s *priv, uint8_t const regaddr, uint8_t regval); /* Character driver methods */ static ssize_t apds9960_read(FAR struct file *filep, FAR char *buffer, size_t buflen); static ssize_t apds9960_write(FAR struct file *filep, FAR const char *buffer, size_t buflen); /**************************************************************************** * Private Data ****************************************************************************/ static const struct file_operations g_apds9960_fops = { NULL, /* open */ NULL, /* close */ apds9960_read, /* read */ apds9960_write, /* write */ }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: apds9960_worker ****************************************************************************/ static void apds9960_worker(FAR void *arg) { FAR struct apds9960_dev_s *priv = (FAR struct apds9960_dev_s *)arg; int ret; DEBUGASSERT(priv != NULL); ret = apds9960_readgesture(priv); if (ret != DIR_NONE) { sninfo("Got a valid gesture!\n"); } } /**************************************************************************** * Name: apds9960_int_handler * * Description: * Interrupt handler (ISR) for APDS-99600 INT pin. * ****************************************************************************/ static int apds9960_int_handler(int irq, FAR void *context, FAR void *arg) { int ret; FAR struct apds9960_dev_s *priv = (FAR struct apds9960_dev_s *)arg; DEBUGASSERT(priv != NULL); /* Transfer processing to the worker thread. Since APDS-9960 interrupts * are disabled while the work is pending, no special action should be * required to protect the work queue. */ DEBUGASSERT(priv->work.worker == NULL); ret = work_queue(HPWORK, &priv->work, apds9960_worker, priv, 0); if (ret != 0) { snerr("ERROR: Failed to queue work: %d\n", ret); } return OK; } /**************************************************************************** * Name: apds9960_resetgesture * * Description: * Reset gesture values * ****************************************************************************/ static void apds9960_resetgesture(FAR struct apds9960_dev_s *priv) { priv->gesture_data.index = 0; priv->gesture_data.total_gestures = 0; priv->gesture_ud_delta = 0; priv->gesture_lr_delta = 0; priv->gesture_ud_count = 0; priv->gesture_lr_count = 0; priv->gesture_near_count = 0; priv->gesture_far_count = 0; priv->gesture_state = 0; } /**************************************************************************** * Name: apds9960_setdefault * * Description: * Verify if sensor is present. Check if ID is 0xAB. * ****************************************************************************/ static int apds9960_setdefault(FAR struct apds9960_dev_s *priv) { int ret; /* Set default values for ambient light and proximity registers */ ret = apds9960_i2c_write8(priv, APDS9960_ATIME, DEFAULT_ATIME); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_ATIME!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_WTIME, DEFAULT_WTIME); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_WTIME!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_PPULSE, DEFAULT_PPULSE); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_PPULSE!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_POFFSET_UR, DEFAULT_POFFSET_UR); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_POFFSET_UR!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_POFFSET_DL, DEFAULT_POFFSET_DL); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_POFFSET_DL!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_CONFIG1, DEFAULT_CONFIG1); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_CONFIG1!\n"); return ret; } /* Set LED driver strength to 100mA, AGAIN 4X and PGAIN 4X */ ret = apds9960_i2c_write8(priv, APDS9960_CONTROL, DEFAULT_CONTROL); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_CONTROL!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_PILT, DEFAULT_PILT); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_PILT!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_PIHT, DEFAULT_PIHT); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_PIHT!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_AILTL, DEFAULT_AILTL); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_AILTL!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_AILTH, DEFAULT_AILTH); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_AILTH!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_AIHTL, DEFAULT_AIHTL); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_AIHTL!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_AIHTH, DEFAULT_AIHTH); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_AIHTH!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_PERS, DEFAULT_PERS); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_PERS!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_CONFIG2, DEFAULT_CONFIG2); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_CONFIG2!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_CONFIG3, DEFAULT_CONFIG3); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_CONFIG3!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_GPENTH, DEFAULT_GPENTH); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_GPENTH!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_GEXTH, DEFAULT_GEXTH); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_GEXTH!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_GCONFIG1, DEFAULT_GCONFIG1); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_GCONFIG1!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_GCONFIG2, DEFAULT_GCONFIG2); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_GCONFIG2!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_GOFFSET_U, DEFAULT_GOFFSET_U); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_GOFFSET_U!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_GOFFSET_D, DEFAULT_GOFFSET_D); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_GOFFSET_D!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_GOFFSET_L, DEFAULT_GOFFSET_L); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_GOFFSET_L!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_GOFFSET_R, DEFAULT_GOFFSET_R); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_GOFFSET_R!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_GPULSE, DEFAULT_GPULSE); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_GPULSE!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_GCONFIG3, DEFAULT_GCONFIG3); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_GCONFIG3!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_GCONFIG4, DEFAULT_GCONFIG4); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_GCONFIG3!\n"); return ret; } ret = apds9960_i2c_write8(priv, APDS9960_WTIME, 0xff); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_WTIME!\n"); return ret; } return OK; } /**************************************************************************** * Name: apds9960_probe * * Description: * Verify if sensor is present. Check if ID is 0xAB. * ****************************************************************************/ static int apds9960_probe(FAR struct apds9960_dev_s *priv) { int ret; uint8_t id; ret = apds9960_i2c_read8(priv, APDS9960_ID, &id); if (ret < 0) { snerr("ERROR: Failed to initialize the APDS9960!\n"); return ret; } if (id != APDS9960_ID_VAL) { return -ENODEV; } return OK; } /**************************************************************************** * Name: apds9960_i2c_read * * Description: * Read an arbitrary number of bytes starting at regaddr * ****************************************************************************/ static int apds9960_i2c_read(FAR struct apds9960_dev_s *priv, uint8_t const regaddr, FAR uint8_t *regval, int len) { struct i2c_config_s config; int ret = -1; /* Set up the I2C configuration */ config.frequency = CONFIG_APDS9960_I2C_FREQUENCY; config.address = priv->config->i2c_addr; config.addrlen = 7; /* Write the register address to read from */ ret = i2c_write(priv->config->i2c_dev, &config, ®addr, 1); if (ret < 0) { snerr ("i2c_write failed: %d\n", ret); return ret; } /* Read "len" bytes from regaddr */ ret = i2c_read(priv->config->i2c_dev, &config, regval, len); if (ret < 0) { snerr ("i2c_read failed: %d\n", ret); return ret; } return OK; } /**************************************************************************** * Name: apds9960_i2c_read8 * * Description: * Read 8-bit register * ****************************************************************************/ static int apds9960_i2c_read8(FAR struct apds9960_dev_s *priv, uint8_t const regaddr, FAR uint8_t *regval) { int ret; ret = apds9960_i2c_read(priv, regaddr, regval, 1); return ret; } /**************************************************************************** * Name: apds9960_i2c_write * * Description: * Write an arbitrary number of bytes starting at regaddr. * ****************************************************************************/ static int apds9960_i2c_write(FAR struct apds9960_dev_s *priv, uint8_t const *data, int len) { struct i2c_config_s config; int ret; /* Set up the I2C configuration */ config.frequency = CONFIG_APDS9960_I2C_FREQUENCY; config.address = priv->config->i2c_addr; config.addrlen = 7; /* Write the data */ ret = i2c_write(priv->config->i2c_dev, &config, data, len); if (ret < 0) { snerr("ERROR: i2c_write failed: %d\n", ret); } return ret; } /**************************************************************************** * Name: apds9960_i2c_write8 * * Description: * Write an arbitrary number of bytes starting at regaddr. * ****************************************************************************/ static int apds9960_i2c_write8(FAR struct apds9960_dev_s *priv, uint8_t const regaddr, uint8_t regval) { int ret; uint8_t data[2]; /* Create the addr:val data */ data[0] = regaddr; data[1] = regval; ret = apds9960_i2c_write(priv, data, 2); return ret; } /**************************************************************************** * Name: apds9960_isgestureavailable * * Description: * Return true is gesture data is valid. * ****************************************************************************/ static bool apds9960_isgestureavailable(FAR struct apds9960_dev_s *priv) { int ret; uint8_t val; /* Read value from GSTATUS register */ ret = apds9960_i2c_read8(priv, APDS9960_GSTATUS, &val); if (ret < 0) { snerr("ERROR: Failed to read APDS9960_GSTATUS!\n"); return ret; } /* Return true/false based on GVALID bit */ if ((val & GVALID) == GVALID) { return true; } else { return false; } } /**************************************************************************** * Name: apds9960_processgesture * * Description: * Process the data read from the photodiodes * ****************************************************************************/ static bool apds9960_processgesture(FAR struct apds9960_dev_s *priv) { uint8_t u_first = 0; uint8_t d_first = 0; uint8_t l_first = 0; uint8_t r_first = 0; uint8_t u_last = 0; uint8_t d_last = 0; uint8_t l_last = 0; uint8_t r_last = 0; int ud_ratio_first; int lr_ratio_first; int ud_ratio_last; int lr_ratio_last; int ud_delta; int lr_delta; int i; /* If we have less than 4 total gestures, that's not enough */ if (priv->gesture_data.total_gestures <= 4) { snerr("ERROR: We don't have enough gesture: %d\n", priv->gesture_data.total_gestures); return false; } /* Check to make sure our data isn't out of bounds */ if ((priv->gesture_data.total_gestures <= 32) && \ (priv->gesture_data.total_gestures > 0)) { /* Find the first value in U/D/L/R above the threshold */ for (i = 0; i < priv->gesture_data.total_gestures; i++) { if ((priv->gesture_data.u_data[i] > GESTURE_THRESHOLD_OUT) && \ (priv->gesture_data.d_data[i] > GESTURE_THRESHOLD_OUT) && \ (priv->gesture_data.l_data[i] > GESTURE_THRESHOLD_OUT) && \ (priv->gesture_data.r_data[i] > GESTURE_THRESHOLD_OUT)) { u_first = priv->gesture_data.u_data[i]; d_first = priv->gesture_data.d_data[i]; l_first = priv->gesture_data.l_data[i]; r_first = priv->gesture_data.r_data[i]; break; } } /* If one of the _first values is 0, then there is no good data */ if ((u_first == 0) || (d_first == 0) || \ (l_first == 0) || (r_first == 0)) { snerr("ERROR: First value is zero! U=%d, D=%d, L=%d, R=%d\n", \ u_first, d_first, l_first, r_first); return false; } /* Find the last value in U/D/L/R above the threshold */ for (i = priv->gesture_data.total_gestures - 1; i >= 0; i--) { sninfo("Finding last:\n"); sninfo("U: %03d\n", priv->gesture_data.u_data[i]); sninfo("D: %03d\n", priv->gesture_data.d_data[i]); sninfo("L: %03d\n", priv->gesture_data.l_data[i]); sninfo("R: %03d\n", priv->gesture_data.r_data[i]); if ((priv->gesture_data.u_data[i] > GESTURE_THRESHOLD_OUT) && (priv->gesture_data.d_data[i] > GESTURE_THRESHOLD_OUT) && (priv->gesture_data.l_data[i] > GESTURE_THRESHOLD_OUT) && (priv->gesture_data.r_data[i] > GESTURE_THRESHOLD_OUT)) { u_last = priv->gesture_data.u_data[i]; d_last = priv->gesture_data.d_data[i]; l_last = priv->gesture_data.l_data[i]; r_last = priv->gesture_data.r_data[i]; break; } } } /* Calculate the first vs. last ratio of up/down and left/right */ ud_ratio_first = ((u_first - d_first) * 100) / (u_first + d_first); lr_ratio_first = ((l_first - r_first) * 100) / (l_first + r_first); ud_ratio_last = ((u_last - d_last) * 100) / (u_last + d_last); lr_ratio_last = ((l_last - r_last) * 100) / (l_last + r_last); sninfo("Last Values:\n"); sninfo("U: %03d\n", u_last); sninfo("D: %03d\n", d_last); sninfo("L: %03d\n", l_last); sninfo("R: %03d\n", r_last); sninfo("Ratios:\n"); sninfo("UD Fi: %03d\n", ud_ratio_first); sninfo("UD La: %03d\n", ud_ratio_last); sninfo("LR Fi: %03d\n", lr_ratio_first); sninfo("LR La: %03d\n", lr_ratio_last); /* Determine the difference between the first and last ratios */ ud_delta = ud_ratio_last - ud_ratio_first; lr_delta = lr_ratio_last - lr_ratio_first; sninfo("Deltas:\n"); sninfo("UD: %03d\n", ud_delta); sninfo("LR: %03d\n", lr_delta); /* Accumulate the UD and LR delta values */ priv->gesture_ud_delta += ud_delta; priv->gesture_lr_delta += lr_delta; sninfo("Accumulations:\n"); sninfo("UD: %03d\n", priv->gesture_ud_delta); sninfo("LR: %03d\n", priv->gesture_lr_delta); /* Determine U/D gesture */ if (priv->gesture_ud_delta >= GESTURE_SENSITIVITY_1) { priv->gesture_ud_count = 1; } else { if (priv->gesture_ud_delta <= -GESTURE_SENSITIVITY_1) { priv->gesture_ud_count = -1; } else { priv->gesture_ud_count = 0; } } /* Determine L/R gesture */ if (priv->gesture_lr_delta >= GESTURE_SENSITIVITY_1) { priv->gesture_lr_count = 1; } else { if (priv->gesture_lr_delta <= -GESTURE_SENSITIVITY_1) { priv->gesture_lr_count = -1; } else { priv->gesture_lr_count = 0; } } /* Determine Near/Far gesture */ if ((priv->gesture_ud_count == 0) && (priv->gesture_lr_count == 0)) { if ((abs(ud_delta) < GESTURE_SENSITIVITY_2) && \ (abs(lr_delta) < GESTURE_SENSITIVITY_2)) { if ((ud_delta == 0) && (lr_delta == 0)) { priv->gesture_near_count++; } else { if ((ud_delta != 0) || (lr_delta != 0)) { priv->gesture_far_count++; } } if ((priv->gesture_near_count >= 10) && \ (priv->gesture_far_count >= 2)) { if ((ud_delta == 0) && (lr_delta == 0)) { priv->gesture_state = NEAR_STATE; } else { if ((ud_delta != 0) && (lr_delta != 0)) { priv->gesture_state = FAR_STATE; } } return true; } } } else { if ((abs(ud_delta) < GESTURE_SENSITIVITY_2) && \ (abs(lr_delta) < GESTURE_SENSITIVITY_2)) { if ((ud_delta == 0) && (lr_delta == 0)) { priv->gesture_near_count++; } if (priv->gesture_near_count >= 10) { priv->gesture_ud_count = 0; priv->gesture_lr_count = 0; priv->gesture_ud_delta = 0; priv->gesture_lr_delta = 0; } } } sninfo(" UD_CT: %03d\n", priv->gesture_ud_count); sninfo(" LR_CT: %03d\n", priv->gesture_lr_count); sninfo(" NEAR_CT: %03d\n", priv->gesture_near_count); sninfo(" FAR_CT: %03d\n", priv->gesture_far_count); sninfo("----------------------\n"); return false; } /**************************************************************************** * Name: apds9960_decodegesture * * Description: * Decode the sensor data and return true if there is some valid data * ****************************************************************************/ static bool apds9960_decodegesture(FAR struct apds9960_dev_s *priv) { /* Return if near or far event is detected */ if (priv->gesture_state == NEAR_STATE) { priv->gesture_motion = DIR_NEAR; return true; } else { if (priv->gesture_state == FAR_STATE) { priv->gesture_motion = DIR_FAR; return true; } } /* Determine swipe direction */ if ((priv->gesture_ud_count == -1) && (priv->gesture_lr_count == 0)) { priv->gesture_motion = DIR_UP; } else { if ((priv->gesture_ud_count == 1) && (priv->gesture_lr_count == 0)) { priv->gesture_motion = DIR_DOWN; } else { if ((priv->gesture_ud_count == 0) && (priv->gesture_lr_count == 1)) { priv->gesture_motion = DIR_RIGHT; } else { if ((priv->gesture_ud_count == 0) && (priv->gesture_lr_count == -1)) { priv->gesture_motion = DIR_LEFT; } else { if ((priv->gesture_ud_count == -1) && (priv->gesture_lr_count == 1)) { if (abs(priv->gesture_ud_delta) > \ abs(priv->gesture_lr_delta)) { priv->gesture_motion = DIR_UP; } else { priv->gesture_motion = DIR_RIGHT; } } else { if ((priv->gesture_ud_count == 1) && \ (priv->gesture_lr_count == -1)) { if (abs(priv->gesture_ud_delta) > \ abs(priv->gesture_lr_delta)) { priv->gesture_motion = DIR_DOWN; } else { priv->gesture_motion = DIR_LEFT; } } else { if ((priv->gesture_ud_count == -1) && \ (priv->gesture_lr_count == -1)) { if (abs(priv->gesture_ud_delta) > \ abs(priv->gesture_lr_delta)) { priv->gesture_motion = DIR_UP; } else { priv->gesture_motion = DIR_LEFT; } } else { if ((priv->gesture_ud_count == 1) && \ (priv->gesture_lr_count == 1)) { if (abs(priv->gesture_ud_delta) > \ abs(priv->gesture_lr_delta)) { priv->gesture_motion = DIR_DOWN; } else { priv->gesture_motion = DIR_RIGHT; } } else { return false; } } } } } } } } return true; } /**************************************************************************** * Name: apds9960_readgesture * * Description: * Read the photodiode data, process/decode it and return the guess * ****************************************************************************/ static int apds9960_readgesture(FAR struct apds9960_dev_s *priv) { uint8_t fifo_level = 0; uint8_t bytes_read = 0; uint8_t fifo_data[128]; uint8_t gstatus; int motion; int ret; int i; /* Make sure that power and gesture is on and data is valid */ if (!apds9960_isgestureavailable(priv)) { return DIR_NONE; } /* Keep looping as long as gesture data is valid */ while (1) { /* Wait some time to collect next batch of FIFO data */ nxsig_usleep(FIFO_PAUSE_TIME); /* Get the contents of the STATUS register. Is data still valid? */ ret = apds9960_i2c_read8(priv, APDS9960_GSTATUS, &gstatus); if (ret < 0) { snerr("ERROR: Failed to read APDS9960_GSTATUS!\n"); return ret; } /* If we have valid data, read in FIFO */ if ((gstatus & GVALID) == GVALID) { /* Read the current FIFO level */ ret = apds9960_i2c_read8(priv, APDS9960_GFLVL, &fifo_level); if (ret < 0) { snerr("ERROR: Failed to read APDS9960_GFLVL!\n"); return ret; } sninfo("FIFO Level: %d\n", fifo_level); /* If there's stuff in the FIFO, read it into our data block */ if (fifo_level > 0) { bytes_read = fifo_level * 4; ret = apds9960_i2c_read(priv, APDS9960_GFIFO_U, (uint8_t *) fifo_data, bytes_read); if (ret < 0) { snerr("ERROR: Failed to read APDS9960_GFIFO_U!\n"); return ret; } sninfo("\nFIFO Dump:\n"); for (i = 0; i < fifo_level; i++) { sninfo("U: %03d | D: %03d | L: %03d | R: %03d\n", fifo_data[i], fifo_data[i + 1], fifo_data[i + 2], fifo_data[i + 3]); } sninfo("\n"); /* If at least 1 set of data, sort the data into U/D/L/R */ if (bytes_read >= 4) { for (i = 0; i < bytes_read; i += 4) { priv->gesture_data.u_data[priv->gesture_data.index] = fifo_data[i + 0]; priv->gesture_data.d_data[priv->gesture_data.index] = fifo_data[i + 1]; priv->gesture_data.l_data[priv->gesture_data.index] = fifo_data[i + 2]; priv->gesture_data.r_data[priv->gesture_data.index] = fifo_data[i + 3]; priv->gesture_data.index++; priv->gesture_data.total_gestures++; } sninfo("Up Data:\n"); for (i = 0; i < priv->gesture_data.total_gestures; i++) { sninfo("%03d\n", priv->gesture_data.u_data[i]); } sninfo("\n"); /* Filter and process gesture data. Decode near/far state */ if (apds9960_processgesture(priv)) { if (apds9960_decodegesture(priv)) { /* TODO: U-Turn Gestures */ } } /* Reset data */ priv->gesture_data.index = 0; priv->gesture_data.total_gestures = 0; } } } else { /* Determine best guessed gesture and clean up */ nxsig_usleep(FIFO_PAUSE_TIME); apds9960_decodegesture(priv); motion = priv->gesture_motion; snwarn("END: %d\n", priv->gesture_motion); if (motion == DIR_LEFT) { snwarn("RESULT = LEFT\n"); } if (motion == DIR_RIGHT) { snwarn("RESULT = RIGHT\n"); } if (motion == DIR_UP) { snwarn("RESULT = UP\n"); } if (motion == DIR_DOWN) { snwarn("RESULT = DOWN\n"); } /* Increase semaphore to indicate new data */ nxsem_post(&priv->sample_sem); apds9960_resetgesture(priv); return motion; } } } /**************************************************************************** * Name: apds9960_read ****************************************************************************/ static ssize_t apds9960_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { FAR struct inode *inode; FAR struct apds9960_dev_s *priv; int ret; DEBUGASSERT(filep); inode = filep->f_inode; DEBUGASSERT(inode && inode->i_private); priv = (FAR struct apds9960_dev_s *)inode->i_private; /* Check if the user is reading the right size */ if (buflen < 1) { snerr("ERROR: You need to read at least 1 byte from this sensor!\n"); return -EINVAL; } /* Wait for data available */ ret = nxsem_wait_uninterruptible(&priv->sample_sem); if (ret < 0) { return (ssize_t)ret; } buffer[0] = (char) priv->gesture_motion; buflen = 1; return buflen; } /**************************************************************************** * Name: apds9960_write ****************************************************************************/ static ssize_t apds9960_write(FAR struct file *filep, FAR const char *buffer, size_t buflen) { return -ENOSYS; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: apds9960_register * * Description: * Register the APDS9960 character device as 'devpath' * * Input Parameters: * devpath - The full path to the driver to register. E.g., "/dev/gest0" * i2c - An instance of the I2C interface to communicate with APDS9960 * addr - The I2C address of the APDS9960. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ****************************************************************************/ int apds9960_register(FAR const char *devpath, FAR struct apds9960_config_s *config) { int ret; /* Initialize the APDS9960 device structure */ FAR struct apds9960_dev_s *priv = (FAR struct apds9960_dev_s *)kmm_zalloc(sizeof(struct apds9960_dev_s)); if (priv == NULL) { snerr("ERROR: Failed to allocate instance\n"); return -ENOMEM; } priv->config = config; priv->gesture_motion = DIR_NONE; nxsem_init(&priv->sample_sem, 0, 0); /* Probe APDS9960 device */ ret = apds9960_probe(priv); if (ret != OK) { snerr("ERROR: APDS-9960 is not responding!\n"); return ret; } /* Turn the device OFF to make it sane */ ret = apds9960_i2c_write8(priv, APDS9960_ENABLE, 0); if (ret < 0) { snerr("ERROR: Failed to initialize the APDS9960!\n"); return ret; } /* Wait 100ms */ nxsig_usleep(100000); /* Initialize the device (leave RESET) */ ret = apds9960_i2c_write8(priv, APDS9960_ENABLE, PON); if (ret < 0) { snerr("ERROR: Failed to initialize the APDS9960!\n"); return ret; } /* Set default initial register values */ ret = apds9960_setdefault(priv); if (ret < 0) { snerr("ERROR: Failed to initialize the APDS9960!\n"); return ret; } /* Reset gesture values */ apds9960_resetgesture(priv); /* Enable the Gesture mode and interruptions */ ret = apds9960_i2c_write8(priv, APDS9960_GCONFIG4, (GMODE | GIEN)); if (ret < 0) { snerr("ERROR: Failed to write APDS9960_GCONFIG4!\n"); return ret; } /* Enable the Gesture mode (Proximity mode is needed for gesture mode) */ ret = apds9960_i2c_write8(priv, APDS9960_ENABLE, PON | PEN | GEN | WEN); if (ret < 0) { snerr("ERROR: Failed to initialize the APDS9960!\n"); return ret; } /* Register the character driver */ ret = register_driver(devpath, &g_apds9960_fops, 0666, priv); if (ret < 0) { snerr("ERROR: Failed to register driver: %d\n", ret); kmm_free(priv); } /* Attach to the interrupt */ priv->config->irq_attach(priv->config, apds9960_int_handler, priv); return ret; } #endif /* CONFIG_I2C && CONFIG_SENSORS_APDS9960 */