/**************************************************************************** * boards/arm/cxd56xx/drivers/sensors/rpr0521rs_scu.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_RPR0521RS_SCU) /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define RPR0521RS_ADDR 0x38 /* I2C Slave Address */ #define RPR0521RS_MANUFACTID 0xE0 /* Manufact ID */ #define RPR0521RS_PARTID 0x0A /* Part ID */ #define RPR0521RS_ALS_BYTESPERSAMPLE 4 #define RPR0521RS_PS_BYTESPERSAMPLE 2 #define RPR0521RS_ELEMENTSIZE 0 /* RPR0521RS Registers */ #define RPR0521RS_SYSTEM_CONTROL 0x40 #define RPR0521RS_MODE_CONTROL 0x41 #define RPR0521RS_ALS_PS_CONTROL 0x42 #define RPR0521RS_PS_CONTROL 0x43 #define RPR0521RS_PS_DATA_LSB 0x44 #define RPR0521RS_ALS_DATA0_LSB 0x46 #define RPR0521RS_INTERRUPT 0x4A #define RPR0521RS_PS_TH_LSB 0x4B #define RPR0521RS_PS_TL_LSB 0x4D #define RPR0521RS_MANUFACT_ID 0x92 /* Register SYSTEM_CONTROL */ #define RPR0521RS_SYSTEM_CONTROL_INT_RESET (1 << 6) /* Register MODE_CONTROL */ #define RPR0521RS_MODE_CONTROL_ALS_EN (1 << 7) #define RPR0521RS_MODE_CONTROL_PS_EN (1 << 6) #define RPR0521RS_MODE_CONTROL_MEASTIME_100_100MS (6 << 0) #define RPR0521RS_MODE_CONTROL_MEASTIME_STANDBY (0 << 0) /* Register ALS_PS_CONTROL */ #define RPR0521RS_ALS_PS_CONTROL_LED_CURRENT_100MA (2 << 0) #define RPR0521RS_ALS_PS_CONTROL_DATA1_GAIN_X1 (0 << 2) #define RPR0521RS_ALS_PS_CONTROL_DATA0_GAIN_X1 (0 << 4) /* Register PS_CONTROL */ #define RPR0521RS_PS_CONTROL_PS_GAINX1 (0 << 4) #define RPR0521RS_PS_CONTROL_PS_PERSISTENCE_2 (2 << 0) /* Register INTERRUPT */ #define RPR0521RS_INTERRUPT_PS_INT_STATUS (1 << 7) #define RPR0521RS_INTERRUPT_ALS_INT_STATUS (1 << 6) #define RPR0521RS_INTERRUPT_INT_MODE_PS_TH (0 << 4) #define RPR0521RS_INTERRUPT_INT_MODE_PS_HYSTERESIS (1 << 4) #define RPR0521RS_INTERRUPT_INT_MODE_PS_OUTOFRANGE (2 << 4) #define RPR0521RS_INTERRUPT_INT_ASSERT_KEEP_ACTIVE (0 << 3) #define RPR0521RS_INTERRUPT_INT_LATCH_DISABLE (1 << 2) #define RPR0521RS_INTERRUPT_INT_TRIG_PS (1 << 0) #define RPR0521RS_INTERRUPT_INT_TRIG_INACTIVE (0 << 0) /* PS_TH default value */ #define RPR0521RS_PS_TH_DEFAULT 0x0300 #define SETMODECONTROL_TYPE_PS 0 #define SETMODECONTROL_TYPE_ALS 1 #ifndef itemsof # define itemsof(array) (sizeof(array)/sizeof(array[0])) #endif /**************************************************************************** * Private Type Definitions ****************************************************************************/ /** * @brief Structure for rpr0521rs device */ struct rpr0521rs_dev_s { FAR struct i2c_master_s *i2c; /* I2C interface */ uint8_t addr; /* I2C address */ int port; /* I2C port */ struct seq_s *seq; /* Sequencer instance */ int minor; /* Minor device number */ }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* Character driver methods */ static int rpr0521rs_open_als(FAR struct file *filep); static int rpr0521rs_open_ps(FAR struct file *filep); static int rpr0521rs_close_als(FAR struct file *filep); static int rpr0521rs_close_ps(FAR struct file *filep); static ssize_t rpr0521rs_read_als(FAR struct file *filep, FAR char *buffer, size_t buflen); static ssize_t rpr0521rs_read_ps(FAR struct file *filep, FAR char *buffer, size_t buflen); static ssize_t rpr0521rs_write(FAR struct file *filep, FAR const char *buffer, size_t buflen); static int rpr0521rs_ioctl_als(FAR struct file *filep, int cmd, unsigned long arg); static int rpr0521rs_ioctl_ps(FAR struct file *filep, int cmd, unsigned long arg); /**************************************************************************** * Private Data ****************************************************************************/ /* Ambient light sensor */ static const struct file_operations g_rpr0521rsalsfops = { rpr0521rs_open_als, /* open */ rpr0521rs_close_als, /* close */ rpr0521rs_read_als, /* read */ rpr0521rs_write, /* write */ 0, /* seek */ rpr0521rs_ioctl_als, /* ioctl */ #ifndef CONFIG_DISABLE_POLL 0, /* poll */ #endif 0 /* unlink */ }; /* Proximity sensor */ static const struct file_operations g_rpr0521rspsfops = { rpr0521rs_open_ps, /* open */ rpr0521rs_close_ps, /* close */ rpr0521rs_read_ps, /* read */ rpr0521rs_write, /* write */ 0, /* seek */ rpr0521rs_ioctl_ps, /* ioctl */ #ifndef CONFIG_DISABLE_POLL 0, /* poll */ #endif 0 /* unlink */ }; /* SCU instructions for pick ambient light sensing data. */ static const uint16_t g_rpr0521rsalsinst[] = { SCU_INST_SEND(RPR0521RS_ALS_DATA0_LSB), SCU_INST_RECV(RPR0521RS_ALS_BYTESPERSAMPLE) | SCU_INST_LAST, }; #ifndef CONFIG_RPR0521RS_PROXIMITY_INTERRUPT /* SCU instructions for pick proximity sensing data. */ static const uint16_t g_rpr0521rspsinst[] = { SCU_INST_SEND(RPR0521RS_PS_DATA_LSB), SCU_INST_RECV(RPR0521RS_PS_BYTESPERSAMPLE) | SCU_INST_LAST, }; #endif /* Reference count */ static int g_als_refcnt = 0; #ifndef CONFIG_RPR0521RS_PROXIMITY_INTERRUPT static int g_ps_refcnt = 0; #endif /* Sequencer instance */ static struct seq_s *g_als_seq = NULL; #ifndef CONFIG_RPR0521RS_PROXIMITY_INTERRUPT static struct seq_s *g_ps_seq = NULL; #endif /* Proximity interrupt config */ static uint16_t g_ps_threshold = RPR0521RS_PS_TH_DEFAULT; static uint8_t g_ps_persistence = RPR0521RS_PS_CONTROL_PS_PERSISTENCE_2; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: rpr0521rs_getreg8 * * Description: * Read from an 8-bit RPR0521RS register * ****************************************************************************/ static uint8_t rpr0521rs_getreg8(FAR struct rpr0521rs_dev_s *priv, uint8_t regaddr) { uint8_t regval = 0; uint16_t inst[2]; /* Send register to read and get the next byte */ inst[0] = SCU_INST_SEND(regaddr); inst[1] = SCU_INST_RECV(1) | SCU_INST_LAST; scu_i2ctransfer(priv->port, priv->addr, inst, 2, ®val, 1); return regval; } /**************************************************************************** * Name: rpr0521rs_putreg8 * * Description: * Write to an 8-bit RPR0521RS register * ****************************************************************************/ static void rpr0521rs_putreg8(FAR struct rpr0521rs_dev_s *priv, uint8_t regaddr, uint8_t regval) { uint16_t inst[2]; /* Send register address and set the value */ inst[0] = SCU_INST_SEND(regaddr); inst[1] = SCU_INST_SEND(regval) | SCU_INST_LAST; scu_i2ctransfer(priv->port, priv->addr, inst, 2, NULL, 0); } #ifdef CONFIG_RPR0521RS_PROXIMITY_INTERRUPT /**************************************************************************** * Name: rpr0521rs_getreg16 * * Description: * Read from an 16-bit RPR0521RS register * ****************************************************************************/ static uint16_t rpr0521rs_getreg16(FAR struct rpr0521rs_dev_s *priv, uint8_t regaddr) { uint16_t regval; uint16_t inst[2]; /* Send register to read and get the next byte */ inst[0] = SCU_INST_SEND(regaddr); inst[1] = SCU_INST_RECV(2) | SCU_INST_LAST; scu_i2ctransfer(priv->port, priv->addr, inst, 2, (FAR uint8_t *)®val, 2); return regval; } /**************************************************************************** * Name: rpr0521rs_putreg16 * * Description: * Write to an 16-bit RPR0521RS register * ****************************************************************************/ static void rpr0521rs_putreg16(FAR struct rpr0521rs_dev_s *priv, uint8_t regaddr, uint16_t regval) { uint16_t inst[3]; /* Send register address and set the value */ inst[0] = SCU_INST_SEND(regaddr); inst[1] = SCU_INST_SEND((uint8_t)(regval & 0xff)); inst[2] = SCU_INST_SEND((uint8_t)(regval >> 8)) | SCU_INST_LAST; scu_i2ctransfer(priv->port, priv->addr, inst, 3, NULL, 0); } #endif /**************************************************************************** * Name: rpr0521rs_checkid * * Description: * Read and verify the RPR0521RS chip ID * ****************************************************************************/ static int rpr0521rs_checkid(FAR struct rpr0521rs_dev_s *priv) { uint8_t id; /* Read Manufact ID */ id = rpr0521rs_getreg8(priv, RPR0521RS_MANUFACT_ID); if (id != RPR0521RS_MANUFACTID) { /* Manufact ID is not Correct */ snerr("Wrong Manufact ID! %02x\n", id); return -ENODEV; } /* Read Part ID */ id = rpr0521rs_getreg8(priv, RPR0521RS_SYSTEM_CONTROL); if ((id & 0x3f) != RPR0521RS_PARTID) { /* Part ID is not Correct */ snerr("Wrong Part ID! %02x\n", id); return -ENODEV; } return OK; } /**************************************************************************** * Name: rpr0521rs_setmodecontrol * * Description: * Set MODE_CONTROL register * ****************************************************************************/ static void rpr0521rs_setmodecontrol(FAR struct rpr0521rs_dev_s *priv, uint8_t type, bool enable) { uint8_t val; uint8_t checkbit; uint8_t setbit; irqstate_t flags; if (type == SETMODECONTROL_TYPE_PS) { checkbit = RPR0521RS_MODE_CONTROL_ALS_EN; setbit = RPR0521RS_MODE_CONTROL_PS_EN; } else { checkbit = RPR0521RS_MODE_CONTROL_PS_EN; setbit = RPR0521RS_MODE_CONTROL_ALS_EN; } flags = enter_critical_section(); val = rpr0521rs_getreg8(priv, RPR0521RS_MODE_CONTROL); if (val & checkbit) { if (enable) { val = setbit | checkbit | RPR0521RS_MODE_CONTROL_MEASTIME_100_100MS; } else { val = checkbit | RPR0521RS_MODE_CONTROL_MEASTIME_100_100MS; } } else { if (enable) { val = setbit | RPR0521RS_MODE_CONTROL_MEASTIME_100_100MS; } else { val = RPR0521RS_MODE_CONTROL_MEASTIME_STANDBY; } } rpr0521rs_putreg8(priv, RPR0521RS_MODE_CONTROL, val); leave_critical_section(flags); } /**************************************************************************** * Name: rpr0521rsals_seqinit * * Description: * Initialize SCU sequencer. * ****************************************************************************/ static int rpr0521rsals_seqinit(FAR struct rpr0521rs_dev_s *priv) { DEBUGASSERT(g_als_seq == NULL); /* Open sequencer */ g_als_seq = seq_open(SEQ_TYPE_NORMAL, SCU_BUS_I2C0); if (!g_als_seq) { return -ENOENT; } priv->seq = g_als_seq; seq_setaddress(priv->seq, priv->addr); /* Set instruction and sample data information to sequencer */ seq_setinstruction(priv->seq, g_rpr0521rsalsinst, itemsof(g_rpr0521rsalsinst)); seq_setsample(priv->seq, RPR0521RS_ALS_BYTESPERSAMPLE, 0, RPR0521RS_ELEMENTSIZE, false); return OK; } #ifndef CONFIG_RPR0521RS_PROXIMITY_INTERRUPT /**************************************************************************** * Name: rpr0521rsps_seqinit * * Description: * Initialize SCU sequencer. * ****************************************************************************/ static int rpr0521rsps_seqinit(FAR struct rpr0521rs_dev_s *priv) { DEBUGASSERT(g_ps_seq == NULL); /* Open sequencer */ g_ps_seq = seq_open(SEQ_TYPE_NORMAL, SCU_BUS_I2C0); if (!g_ps_seq) { return -ENOENT; } priv->seq = g_ps_seq; seq_setaddress(priv->seq, priv->addr); /* Set instruction and sample data information to sequencer */ seq_setinstruction(priv->seq, g_rpr0521rspsinst, itemsof(g_rpr0521rspsinst)); seq_setsample(priv->seq, RPR0521RS_PS_BYTESPERSAMPLE, 0, RPR0521RS_ELEMENTSIZE, false); return OK; } #endif /**************************************************************************** * Name: rpr0521rs_open_als * * Description: * This function is called whenever the RPR0521RS device is opened. * ****************************************************************************/ static int rpr0521rs_open_als(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct rpr0521rs_dev_s *priv = inode->i_private; if (g_als_refcnt == 0) { int ret; ret = rpr0521rsals_seqinit(priv); if (ret < 0) { return ret; } rpr0521rs_setmodecontrol(priv, SETMODECONTROL_TYPE_ALS, true); } else { /* Set existing sequencer */ priv->seq = g_als_seq; } g_als_refcnt++; return OK; } /**************************************************************************** * Name: rpr0521rs_open_ps * * Description: * This function is called whenever the RPR0521RS device is opened. * ****************************************************************************/ static int rpr0521rs_open_ps(FAR struct file *filep) { #ifndef CONFIG_RPR0521RS_PROXIMITY_INTERRUPT FAR struct inode *inode = filep->f_inode; FAR struct rpr0521rs_dev_s *priv = inode->i_private; if (g_ps_refcnt == 0) { int ret; ret = rpr0521rsps_seqinit(priv); if (ret < 0) { return ret; } rpr0521rs_setmodecontrol(priv, SETMODECONTROL_TYPE_PS, true); } else { /* Set existing sequencer */ priv->seq = g_ps_seq; } g_ps_refcnt++; #endif return OK; } /**************************************************************************** * Name: rpr0521rs_close_als * * Description: * This routine is called when the RPR0521RS device is closed. * ****************************************************************************/ static int rpr0521rs_close_als(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct rpr0521rs_dev_s *priv = inode->i_private; g_als_refcnt--; seq_ioctl(priv->seq, priv->minor, SCUIOC_STOP, 0); if (g_als_refcnt == 0) { rpr0521rs_setmodecontrol(priv, SETMODECONTROL_TYPE_ALS, false); seq_close(g_als_seq); g_als_seq = NULL; } else { seq_ioctl(priv->seq, priv->minor, SCUIOC_FREEFIFO, 0); } return OK; } /**************************************************************************** * Name: rpr0521rs_close_ps * * Description: * This routine is called when the RPR0521RS device is closed. * ****************************************************************************/ static int rpr0521rs_close_ps(FAR struct file *filep) { #ifndef CONFIG_RPR0521RS_PROXIMITY_INTERRUPT FAR struct inode *inode = filep->f_inode; FAR struct rpr0521rs_dev_s *priv = inode->i_private; g_ps_refcnt--; seq_ioctl(priv->seq, priv->minor, SCUIOC_STOP, 0); if (g_ps_refcnt == 0) { rpr0521rs_setmodecontrol(priv, SETMODECONTROL_TYPE_PS, false); if (g_ps_seq) { seq_close(g_ps_seq); g_ps_seq = NULL; } } else { seq_ioctl(priv->seq, priv->minor, SCUIOC_FREEFIFO, 0); } #endif return OK; } /**************************************************************************** * Name: rpr0521rs_read_als ****************************************************************************/ static ssize_t rpr0521rs_read_als(FAR struct file *filep, FAR char *buffer, size_t len) { FAR struct inode *inode = filep->f_inode; FAR struct rpr0521rs_dev_s *priv = inode->i_private; len = len / RPR0521RS_ALS_BYTESPERSAMPLE * RPR0521RS_ALS_BYTESPERSAMPLE; len = seq_read(priv->seq, priv->minor, buffer, len); return len; } /**************************************************************************** * Name: rpr0521rs_read_ps ****************************************************************************/ static ssize_t rpr0521rs_read_ps(FAR struct file *filep, FAR char *buffer, size_t len) { FAR struct inode *inode = filep->f_inode; FAR struct rpr0521rs_dev_s *priv = inode->i_private; len = len / RPR0521RS_PS_BYTESPERSAMPLE * RPR0521RS_PS_BYTESPERSAMPLE; #ifdef CONFIG_RPR0521RS_PROXIMITY_INTERRUPT if (len) { len = RPR0521RS_PS_BYTESPERSAMPLE; *(FAR uint16_t *)buffer = rpr0521rs_getreg16(priv, RPR0521RS_PS_DATA_LSB); } #else len = seq_read(priv->seq, priv->minor, buffer, len); #endif return len; } /**************************************************************************** * Name: rpr0521rs_write ****************************************************************************/ static ssize_t rpr0521rs_write(FAR struct file *filep, FAR const char *buffer, size_t buflen) { return -ENOSYS; } /**************************************************************************** * Name: rpr0521rs_ioctl_als ****************************************************************************/ static int rpr0521rs_ioctl_als(FAR struct file *filep, int cmd, unsigned long arg) { FAR struct inode *inode = filep->f_inode; FAR struct rpr0521rs_dev_s *priv = inode->i_private; int ret = OK; switch (cmd) { default: { if (_SCUIOCVALID(cmd)) { /* Redirect SCU commands */ ret = seq_ioctl(priv->seq, priv->minor, cmd, arg); } else { snerr("Unrecognized cmd: %d\n", cmd); ret = - ENOTTY; } } break; } return ret; } /**************************************************************************** * Name: rpr0521rs_ioctl_ps ****************************************************************************/ static int rpr0521rs_ioctl_ps(FAR struct file *filep, int cmd, unsigned long arg) { FAR struct inode *inode = filep->f_inode; FAR struct rpr0521rs_dev_s *priv = inode->i_private; int ret = OK; #ifdef CONFIG_RPR0521RS_PROXIMITY_INTERRUPT uint8_t val; #endif switch (cmd) { case SNIOC_SETTHRESHOLD: { g_ps_threshold = (uint16_t)arg; } break; case SNIOC_SETPERSISTENCE: { g_ps_persistence = (uint8_t)arg; } break; case SNIOC_STARTMEASUREMENT: { #ifdef CONFIG_RPR0521RS_PROXIMITY_INTERRUPT val = RPR0521RS_PS_CONTROL_PS_GAINX1 | (g_ps_persistence & 0x0f); rpr0521rs_putreg8(priv, RPR0521RS_PS_CONTROL, val); rpr0521rs_putreg16(priv, RPR0521RS_PS_TH_LSB, g_ps_threshold & 0x0fff); val = RPR0521RS_INTERRUPT_INT_MODE_PS_TH | RPR0521RS_INTERRUPT_INT_ASSERT_KEEP_ACTIVE | RPR0521RS_INTERRUPT_INT_LATCH_DISABLE | RPR0521RS_INTERRUPT_INT_TRIG_PS; rpr0521rs_putreg8(priv, RPR0521RS_INTERRUPT, val); rpr0521rs_setmodecontrol(priv, SETMODECONTROL_TYPE_PS, true); #endif } break; case SNIOC_STOPMEASUREMENT: { #ifdef CONFIG_RPR0521RS_PROXIMITY_INTERRUPT rpr0521rs_setmodecontrol(priv, SETMODECONTROL_TYPE_PS, false); val = RPR0521RS_INTERRUPT_INT_TRIG_INACTIVE; rpr0521rs_putreg8(priv, RPR0521RS_INTERRUPT, val); val = RPR0521RS_SYSTEM_CONTROL_INT_RESET; rpr0521rs_putreg8(priv, RPR0521RS_SYSTEM_CONTROL, val); #endif } break; case SNIOC_GETINTSTATUS: { FAR uint8_t intstatus = rpr0521rs_getreg8(priv, RPR0521RS_INTERRUPT); *(FAR uint8_t *)(uintptr_t)arg = intstatus; sninfo("Get proximity IntStatus 0x%02x\n", intstatus); } break; default: { if (_SCUIOCVALID(cmd)) { #ifndef CONFIG_RPR0521RS_PROXIMITY_INTERRUPT /* Redirect SCU commands */ ret = seq_ioctl(priv->seq, priv->minor, cmd, arg); #else snerr("Unregistered SCU sequencer cmd: %d\n", cmd); ret = - ENOTTY; #endif } else { snerr("Unrecognized cmd: %d\n", cmd); ret = - ENOTTY; } } break; } return ret; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: rpr0521rs_init * * Description: * Initialize the RPR0521RS device * * Input Parameters: * i2c - An instance of the I2C interface to use to communicate with * RPR0521RS * port - I2C port (0 or 1) * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ****************************************************************************/ int rpr0521rs_init(FAR struct i2c_master_s *i2c, int port) { FAR struct rpr0521rs_dev_s tmp; FAR struct rpr0521rs_dev_s *priv = &tmp; int ret; uint8_t val; /* Setup temporary device structure for initialization */ priv->i2c = i2c; priv->addr = RPR0521RS_ADDR; priv->port = port; /* Check Device ID */ ret = rpr0521rs_checkid(priv); if (ret < 0) { snerr("Failed to register driver: %d\n", ret); return ret; } /* ALS initialize */ val = RPR0521RS_ALS_PS_CONTROL_DATA0_GAIN_X1 | RPR0521RS_ALS_PS_CONTROL_DATA1_GAIN_X1 | RPR0521RS_ALS_PS_CONTROL_LED_CURRENT_100MA; rpr0521rs_putreg8(priv, RPR0521RS_ALS_PS_CONTROL, val); /* PS initialize */ val = RPR0521RS_PS_CONTROL_PS_GAINX1; rpr0521rs_putreg8(priv, RPR0521RS_PS_CONTROL, val); val = RPR0521RS_INTERRUPT_INT_TRIG_INACTIVE; rpr0521rs_putreg8(priv, RPR0521RS_INTERRUPT, val); return OK; } /**************************************************************************** * Name: rpr0521rsals_register * * Description: * Register the RPR0521RS ambient light sensor character device as * 'devpath' * * Input Parameters: * devpath - The full path to the driver to register. E.g., "/dev/light0" * minor - minor device number * i2c - An instance of the I2C interface to use to communicate with * RPR0521RS * port - I2C port (0 or 1) * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ****************************************************************************/ int rpr0521rsals_register(FAR const char *devpath, int minor, FAR struct i2c_master_s *i2c, int port) { FAR struct rpr0521rs_dev_s *priv; char path[16]; int ret; /* Initialize the RPR0521RS device structure */ priv = (FAR struct rpr0521rs_dev_s *) kmm_malloc(sizeof(struct rpr0521rs_dev_s)); if (!priv) { snerr("Failed to allocate instance\n"); return -ENOMEM; } priv->i2c = i2c; priv->addr = RPR0521RS_ADDR; priv->port = port; priv->seq = NULL; priv->minor = minor; /* Register the character driver */ snprintf(path, sizeof(path), "%s%d", devpath, minor); ret = register_driver(path, &g_rpr0521rsalsfops, 0666, priv); if (ret < 0) { snerr("Failed to register driver: %d\n", ret); kmm_free(priv); } return ret; } /**************************************************************************** * Name: rpr0521rsps_register * * Description: * Register the RPR0521RS proximity sensor character device as 'devpath' * * Input Parameters: * devpath - The full path to the driver to register. E.g., "/dev/proxim0" * minor - minor device number * i2c - An instance of the I2C interface to use to communicate with * RPR0521RS * port - I2C port (0 or 1) * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ****************************************************************************/ int rpr0521rsps_register(FAR const char *devpath, int minor, FAR struct i2c_master_s *i2c, int port) { FAR struct rpr0521rs_dev_s *priv; char path[16]; int ret; /* Initialize the RPR0521RS device structure */ priv = (FAR struct rpr0521rs_dev_s *) kmm_malloc(sizeof(struct rpr0521rs_dev_s)); if (!priv) { snerr("Failed to allocate instance\n"); return -ENOMEM; } priv->i2c = i2c; priv->addr = RPR0521RS_ADDR; priv->port = port; priv->seq = NULL; priv->minor = minor; /* Register the character driver */ snprintf(path, sizeof(path), "%s%d", devpath, minor); ret = register_driver(path, &g_rpr0521rspsfops, 0666, priv); if (ret < 0) { snerr("Failed to register driver: %d\n", ret); kmm_free(priv); } sninfo("RPR0521RS proximity sensor driver loaded successfully!\n"); return ret; } #endif /* CONFIG_I2C && CONFIG_RPR0521RS && CONFIG_CXD56_SCU */