/****************************************************************************
* drivers/sensors/isl29023.c
*
* Copyright (C) 2019 DataVision s.r.o. All rights reserved.
* Authors: Matous Pokorny <matous.pokorny@datavision.cz>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <errno.h>
#include <debug.h>
#include <stdio.h>
#include <string.h>
#include <nuttx/fs/fs.h>
#include <nuttx/i2c/i2c_master.h>
#include <nuttx/kmalloc.h>
#include <nuttx/random.h>
#include <nuttx/sensors/isl29023.h>
#if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_ISL29023)
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
#ifndef CONFIG_ISL29023_I2C_FREQUENCY
# define CONFIG_ISL29023_I2C_FREQUENCY 400000
#endif
/* Registers definitions */
#define ISL29023_COMMAND_1 0x00
#define ISL29023_COMMAND_2 0x01
#define ISL29023_DATA_LSB 0x02
#define ISL29023_DATA_MSB 0x03
#define ISL29023_INT_LT_LSB 0x04
#define ISL29023_INT_LT_MSB 0x05
#define ISL29023_INT_HT_LSB 0x06
#define ISL29023_INT_HT_MSB 0x07
#define ISL29023_TEST 0x08
/* Registers definitions */
#define ISL29023_RESOLUTION_MASK 0x3
#define ISL29023_RESOLUTION_SHIFT 0x2
#define ISL29023_ALS_RANGE_MASK 0x3
#define ISL29023_ALS_RANGE_SHIFT 0x0
#define ISL29023_OP_MODE_MASK 0x7
#define ISL29023_OP_MODE_SHIFT 0x5
/****************************************************************************
* Private Types
****************************************************************************/
struct isl29023_dev_s
{
FAR struct i2c_master_s *i2c;
uint8_t addr; /* Address on the I2C bus */
uint8_t op_mode; /* Defined by isl29023_operational_mode_e */
uint32_t resolution; /* Sensor ADC res. 16..65536 */
uint32_t range; /* Sensor range 1000..64000 */
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* I2C Helpers */
static int isl29023_i2c_write(FAR struct isl29023_dev_s *dev,
FAR const uint8_t *buffer, ssize_t buflen);
static int isl29023_i2c_read(FAR struct isl29023_dev_s *dev,
FAR uint8_t *buffer, ssize_t buflen);
static int isl29023_read_reg(FAR struct isl29023_dev_s *dev,
const uint8_t regaddr, uint8_t *buffer, size_t buflen);
static int isl29023_read_lux(FAR struct isl29023_dev_s *dev,
FAR struct isl29023_data_s *data);
static int isl29023_set_op_mode(FAR struct isl29023_dev_s *dev, uint8_t mode);
static int isl29023_set_resolution(FAR struct isl29023_dev_s *dev,
uint8_t res_mode);
static int isl29023_set_range(FAR struct isl29023_dev_s *dev,
uint8_t range_mode);
/* Driver methods */
static int isl29023_open(FAR struct file *filep);
static int isl29023_close(FAR struct file *filep);
static ssize_t isl29023_read(FAR struct file *filep, FAR char *buffer,
size_t buflen);
static ssize_t isl29023_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen);
static int isl29023_ioctl(FAR struct file *filep, int cmd, unsigned long arg);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct file_operations g_isl29023fops =
{
isl29023_open, /* open */
isl29023_close, /* close */
isl29023_read, /* read */
isl29023_write, /* write */
NULL, /* seek */
isl29023_ioctl, /* ioctl */
NULL /* poll */
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: isl29023_i2c_write
*
* Description:
* Write to the I2C device.
*
****************************************************************************/
static int isl29023_i2c_write(FAR struct isl29023_dev_s *dev,
FAR const uint8_t *buffer, ssize_t buflen)
{
struct i2c_msg_s msg;
int ret;
/* Setup for the transfer */
msg.frequency = CONFIG_ISL29023_I2C_FREQUENCY,
msg.addr = dev->addr;
msg.flags = 0;
msg.buffer = (FAR uint8_t *)buffer; /* Override const */
msg.length = buflen;
/* Then perform the transfer. */
ret = I2C_TRANSFER(dev->i2c, &msg, 1);
return (ret >= 0) ? OK : ret;
}
/****************************************************************************
* Name: isl29023_i2c_read
*
* Description:
* Read from the I2C device.
*
****************************************************************************/
static int isl29023_i2c_read(FAR struct isl29023_dev_s *dev,
FAR uint8_t *buffer, ssize_t buflen)
{
struct i2c_msg_s msg;
int ret;
/* Setup for the transfer */
msg.frequency = CONFIG_LM75_I2C_FREQUENCY,
msg.addr = dev->addr,
msg.flags = I2C_M_READ;
msg.buffer = buffer;
msg.length = buflen;
/* Then perform the transfer. */
ret = I2C_TRANSFER(dev->i2c, &msg, 1);
return (ret >= 0) ? OK : ret;
}
/****************************************************************************
* Name: isl29023_read_reg
*
* Description:
* Read register from the I2C device.
*
****************************************************************************/
static int isl29023_read_reg(FAR struct isl29023_dev_s *dev,
const uint8_t regaddr, uint8_t *buffer, size_t buflen)
{
int ret;
ret = isl29023_i2c_write(dev, ®addr, 1);
if (ret < 0)
{
snerr("ERROR: i2c write failed: %d\n", ret);
return ret;
}
ret = isl29023_i2c_read(dev, buffer, buflen);
if (ret < 0)
{
snerr("ERROR: i2c read failed: %d\n", ret);
return ret;
}
return ret;
}
/****************************************************************************
* Name: isl29023_open
*
* Description:
* This function is called whenever the ISL29023 device is opened.
*
****************************************************************************/
static int isl29023_open(FAR struct file *filep)
{
return OK;
}
/****************************************************************************
* Name: isl29023_close
*
* Description:
* This routine is called when the ISL29023 device is closed.
*
****************************************************************************/
static int isl29023_close(FAR struct file *filep)
{
return OK;
}
/****************************************************************************
* Name: isl29023_read
****************************************************************************/
static ssize_t isl29023_read(FAR struct file *filep, FAR char *buffer,
size_t buflen)
{
FAR struct inode *inode = filep->f_inode;
FAR struct isl29023_dev_s *priv = inode->i_private;
int ret;
struct isl29023_data_s data;
ret = isl29023_read_lux(priv, &data);
if (ret < 0)
{
snerr("ERROR: failed to read the sensor: %d\n", ret);
return (ssize_t)ret;
}
else
{
if (buflen < sizeof(data))
{
return -EIO;
}
memcpy(buffer, &data, sizeof(data));
}
return buflen;
}
/****************************************************************************
* Name: isl29023_write
****************************************************************************/
static ssize_t isl29023_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen)
{
return -ENOSYS;
}
/****************************************************************************
* Name: isl29023_read_lux
****************************************************************************/
static int isl29023_read_lux(FAR struct isl29023_dev_s *dev,
FAR struct isl29023_data_s *data)
{
int ret;
uint8_t buffer[2];
ret = isl29023_read_reg(dev, ISL29023_DATA_LSB, buffer, 2);
if (ret < 0)
{
return ret;
}
data->raw = (buffer[1] << 8) | buffer[0];
add_sensor_randomness(data->raw);
uint32_t tmp = (data->raw * dev->range) / dev->resolution;
data->lux = (uint16_t)tmp;
sninfo("raw value %8x, lux: %5u\n", data->raw, data->lux);
return OK;
}
/****************************************************************************
* Name: isl29023_set_op_mode
****************************************************************************/
static int isl29023_set_op_mode(FAR struct isl29023_dev_s *dev, uint8_t mode)
{
uint8_t buffer[2];
int ret;
ret = isl29023_read_reg(dev, ISL29023_COMMAND_1, &buffer[1], 1);
if (ret < 0)
{
snerr("ERROR: i2c read reg failed: %d\n", ret);
return ret;
}
/* Clear the mode bits */
buffer[1] &= ~(ISL29023_OP_MODE_MASK << ISL29023_OP_MODE_SHIFT);
mode &= ISL29023_OP_MODE_MASK;
/* Modify mode bits */
buffer[1] |= mode << ISL29023_OP_MODE_SHIFT;
buffer[0] = ISL29023_COMMAND_1;
dev->op_mode = mode;
sninfo("mode: %x\n", dev->mode);
return isl29023_i2c_write(dev, buffer, 2);
}
/****************************************************************************
* Name: isl29023_set_resolution
****************************************************************************/
static int isl29023_set_resolution(FAR struct isl29023_dev_s *dev,
uint8_t res_mode)
{
uint8_t buffer[2];
int ret;
ret = isl29023_read_reg(dev, ISL29023_COMMAND_2, &buffer[1], 1);
if (ret < 0)
{
snerr("ERROR: i2c read reg failed: %d\n", ret);
return ret;
}
/* Clear the mode bits */
buffer[1] &= ~(ISL29023_RESOLUTION_MASK << ISL29023_RESOLUTION_SHIFT);
res_mode &= ISL29023_RESOLUTION_MASK;
/* Modify mode bits */
buffer[1] |= res_mode << ISL29023_RESOLUTION_SHIFT;
buffer[0] = ISL29023_COMMAND_2;
dev->resolution = 1u << (16u - res_mode * 4u);
sninfo("resolution: %d\n", dev->resolution);
return isl29023_i2c_write(dev, buffer, 2);
}
/****************************************************************************
* Name: isl29023_set_resolution
****************************************************************************/
static int isl29023_set_range(FAR struct isl29023_dev_s *dev,
uint8_t range_mode)
{
uint8_t buffer[2];
int ret;
ret = isl29023_read_reg(dev, ISL29023_COMMAND_2, &buffer[1], 1);
if (ret < 0)
{
snerr("ERROR: i2c read reg failed: %d\n", ret);
return ret;
}
/* Clear the mode bits */
buffer[1] &= ~(ISL29023_ALS_RANGE_MASK << ISL29023_ALS_RANGE_SHIFT);
/* Modify mode bits */
range_mode &= ISL29023_ALS_RANGE_MASK;
buffer[1] |= range_mode << ISL29023_ALS_RANGE_SHIFT;
buffer[0] = ISL29023_COMMAND_2;
dev->range = 1000u * (1u << range_mode) * (1u << range_mode);
sninfo("range: %u\n", dev->range);
return isl29023_i2c_write(dev, buffer, 2);
}
/****************************************************************************
* Name: isl29023_ioctl
****************************************************************************/
static int isl29023_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
{
FAR struct inode *inode = filep->f_inode;
FAR struct isl29023_dev_s *priv = inode->i_private;
int ret = OK;
switch (cmd)
{
/* Write to the COMMAND1 register. Arg: uint8_t value */
case SNIOC_SET_OPERATIONAL_MODE:
ret = isl29023_set_op_mode(priv, (uint8_t)arg);
sninfo("Set operation mode %d with result %d\n", (uint8_t)arg, ret);
break;
/* Write to the COMMAND2 register. Arg: uint8_t value */
case SNIOC_SET_RESOLUTION:
ret = isl29023_set_resolution(priv, (uint8_t)arg);
sninfo("Set resolution mode %d with result %d\n", (uint8_t)arg, ret);
break;
/* Write to the COMMAND2 register. Arg: uint8_t value */
case SNIOC_SET_RANGE:
ret = isl29023_set_range(priv, (uint8_t)arg);
sninfo("Set range mode %d with result %d\n", (uint8_t)arg, ret);
break;
default:
sninfo("Unrecognized cmd: 0x%04x\n", cmd);
ret = -ENOTTY;
break;
}
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
int isl29023_register(FAR const char *devpath, FAR struct i2c_master_s *i2c,
uint8_t addr)
{
FAR struct isl29023_dev_s *priv;
int ret;
priv = (FAR struct isl29023_dev_s *)kmm_malloc(sizeof(struct isl29023_dev_s));
if (priv == NULL)
{
snerr("ERROR: Failed to allocate instance\n");
return -ENOMEM;
}
priv->i2c = i2c;
priv->addr = addr;
priv->resolution = 0x10000;
priv->range = 64000;
priv->op_mode = ISL29023_OP_MODE_POWER_DOWN;
/* Register the character driver */
ret = register_driver(devpath, &g_isl29023fops, 0666, priv);
if (ret < 0)
{
snerr("ERROR: Failed to register driver: %d\n", ret);
kmm_free(priv);
}
return ret;
}
#endif /* CONFIG_I2C && CONFIG_SENSORS_ISL29023 */