#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#

if ARCH_BOARD_SAMA5D3_XPLAINED

choice
	prompt "CPU Frequency"
	default SAMA5D3XPLAINED_396MHZ

config SAMA5D3XPLAINED_384MHZ
	bool "384 MHz"

config SAMA5D3XPLAINED_396MHZ
	bool "396 MHz"

config SAMA5D3XPLAINED_528MHZ
	bool "528 MHz"

endchoice # CPU Frequency

choice
	prompt "SAMA5D3-Xplained DRAM Type"
	default SAMA5D3XPLAINED_MT47H128M16RT
	depends on SAMA5_DDRCS

config SAMA5D3XPLAINED_MT47H128M16RT
	bool "MT47H128M16RT"
	---help---
		Micron 2Gbit x16 DDR2-1066 128Mb

config SAMA5D3XPLAINED_MT47H64M16HR
	bool "MT47H64M16HR"
	---help---
		Micron 1Gbit x16 DDR2-800 64Mb

endchoice # SAMA5D3-Xplained DRAM Type

config SAMA5D3XPLAINED_NAND_AUTOMOUNT
	bool "NAND FLASH auto-mount"
	default n
	depends on NSH_ARCHINIT && SAMA5_EBICS3_NAND
	---help---
		Automatically initialize the NAND FLASH driver when NSH starts.

choice
	prompt "NAND FLASH configuration"
	default SAMA5D3XPLAINED_NAND_NXFFS
	depends on SAMA5D3XPLAINED_NAND_AUTOMOUNT

config SAMA5D3XPLAINED_NAND_FTL
	bool "Create NAND FLASH block driver"
	depends on MTD && MTD_NAND
	---help---
		Create the MTD driver for the NAND and "wrap" the NAND as a standard
		block driver that could then, for example, be mounted using FAT or
		any other file system.  Any file system may be used, but there will
		be no wear-leveling.

		NOTE: This options is not currently recommended.  There is not now
		NuttX file system that can handle the NAND back blocks or performs
		wear-leveling other than NXFFS and NXFFS does not use a block driver
		but, rather, operates directly upon the NAND MTD device.

config SAMA5D3XPLAINED_NAND_NXFFS
	bool "Create NAND FLASH NXFFS file system"
	depends on MTD && MTD_NAND && FS_NXFFS && NXFFS_NAND
	---help---
		Create the MTD driver for the NAND and mount the NAND device as
		a wear-leveling, NuttX FLASH file system (NXFFS).  The downside of
		NXFFS is that it can be very slow.

		NOTE: NXFFS is recommended because (1) it can handle the NAND back
		blocks and (1) performs wear-leveling.

endchoice # NAND FLASH configuration

config SAMA5D3XPLAINED_AT25_AUTOMOUNT
	bool "AT25 serial FLASH auto-mount"
	default n
	depends on NSH_ARCHINIT && SAMA5_SPI0 && MTD_AT25
	---help---
		Automatically initialize the AT25 SPI FLASH driver when NSH starts.

choice
	prompt "AT25 serial FLASH configuration"
	default SAMA5D3XPLAINED_AT25_FTL
	depends on SAMA5D3XPLAINED_AT25_AUTOMOUNT

config SAMA5D3XPLAINED_AT25_FTL
	bool "Create AT25 Serial FLASH block driver"
	---help---
		Create the MTD driver for the AT25 and "wrap" the AT25 as a standard
		block driver that could then, for example, be mounted using FAT or
		any other file system.  Any file system may be used, but there will
		be no wear-leveling.

config SAMA5D3XPLAINED_AT25_NXFFS
	bool "Create AT25 serial FLASH NXFFS file system"
	depends on FS_NXFFS
	---help---
		Create the MTD driver for the AT25 and mount the AT25 device as
		a wear-leveling, NuttX FLASH file system (NXFFS).  The downside of
		NXFFS is that it can be very slow.

endchoice # AT25 serial FLASH configuration

config SAMA5D3XPLAINED_CHANNEL
	int "PWM channel number"
	default 0 if SAMA5_PWM_CHAN0
	default 1 if SAMA5_PWM_CHAN1
	default 2 if SAMA5_PWM_CHAN2
	default 3 if SAMA5_PWM_CHAN3
	range 0 3
	depends on PWM && SAMA5_PWM
	---help---
		Selects the PWM channel number that will be used to perform the PWM
		test.  See apps/examples/pwm.

if AUDIO_I2SCHAR && (SAMA5_SSC0 || SAMA5_SSC1)

if SAMA5_SSC0 && SAMA5_SSC1

config SAMA5D3XPLAINED_SSC_PORT
	int "SSC port number"
	default 0
	range 0 1
	---help---
		Specify the I2S port to use, i.e., 0 for SSC0 or 1 for SSC1

endif # SAMA5_SSC0 && SAMA5_SSC1

if SAMA5_SSC0 && !SAMA5_SSC1

config SAMA5D3XPLAINED_SSC_PORT
	int
	default 0

endif # SAMA5_SSC0 && !SAMA5_SSC1

if !SAMA5_SSC0 && SAMA5_SSC1

config SAMA5D3XPLAINED_SSC_PORT
	int
	default 1

endif # SAMA5_SSC0 && !SAMA5_SSC1

config SAMA5D3XPLAINED_I2SCHAR_MINOR
	int "I2S character driver minor number"
	default 0
	---help---
		The minor device number to use when registering the I2S character
		device.  The driver will be registered at /dev/is2charN where N is
		the value provided by this setting.

endif # AUDIO_I2SCHAR && (SAMA5_SSC0 || SAMA5_SSC1)

endif # ARCH_BOARD_SAMA5D3_XPLAINED