/**************************************************************************** * drivers/ioexpander/skeleton.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include "skeleton.h" #if defined(CONFIG_IOEXPANDER_skeleton) /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /**************************************************************************** * Private Types ****************************************************************************/ #ifdef CONFIG_IOEXPANDER_INT_ENABLE /* This type represents on registered pin interrupt callback */ struct skel_callback_s { ioe_pinset_t pinset; /* Set of pin interrupts that will generate the callback */ ioe_callback_t cbfunc; /* The saved callback function pointer */ }; #endif /* This structure represents the state of the I/O Expander driver */ struct skel_dev_s { struct ioexpander_dev_s dev; /* Nested structure to allow casting as public gpio expander */ #ifdef CONFIG_skeleton_MULTIPLE FAR struct skel_dev_s *flink; /* Supports a singly linked list of drivers */ #endif mutex_t lock; /* Mutual exclusion */ #ifdef CONFIG_IOEXPANDER_INT_ENABLE struct work_s work; /* Supports the interrupt handling "bottom half" */ /* Saved callback information for each I/O expander client */ struct skel_callback_s cb[CONFIG_SKELETON_INT_NCALLBACKS]; #endif }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static int skel_lock(FAR struct skel_dev_s *priv); static int skel_direction(FAR struct ioexpander_dev_s *dev, uint8_t pin, int dir); static int skel_option(FAR struct ioexpander_dev_s *dev, uint8_t pin, int opt, void *val); static int skel_writepin(FAR struct ioexpander_dev_s *dev, uint8_t pin, bool value); static int skel_readpin(FAR struct ioexpander_dev_s *dev, uint8_t pin, FAR bool *value); static int skel_readbuf(FAR struct ioexpander_dev_s *dev, uint8_t pin, FAR bool *value); #ifdef CONFIG_IOEXPANDER_MULTIPIN static int skel_multiwritepin(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count); static int skel_multireadpin(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count); static int skel_multireadbuf(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count); #endif #ifdef CONFIG_IOEXPANDER_INT_ENABLE static int skel_attach(FAR struct ioexpander_dev_s *dev, ioe_pinset_t pinset, ioe_callback_t callback); static int skel_detach(FAR struct ioexpander_dev_s *dev, FAR void *handle); static void skel_irqworker(void *arg); static void skel_interrupt(FAR void *arg); #endif /**************************************************************************** * Private Data ****************************************************************************/ #ifndef CONFIG_skeleton_MULTIPLE /* If only a single device is supported, then the driver state structure may * as well be pre-allocated. */ static struct skel_dev_s g_skel; #endif /* I/O expander vtable */ static const struct ioexpander_ops_s g_skel_ops = { skel_direction, skel_option, skel_writepin, skel_readpin, skel_readbuf #ifdef CONFIG_IOEXPANDER_MULTIPIN , skel_multiwritepin , skel_multireadpin , skel_multireadbuf #endif #ifdef CONFIG_IOEXPANDER_INT_ENABLE , skel_attach , skel_detach #endif }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: skel_direction * * Description: * Set the direction of an ioexpander pin. Required. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin to alter in this call * dir - One of the IOEXPANDER_DIRECTION_ macros * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int skel_direction(FAR struct ioexpander_dev_s *dev, uint8_t pin, int direction) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; int ret; if (direction != IOEXPANDER_DIRECTION_IN && direction != IOEXPANDER_DIRECTION_OUT) { return -EINVAL; } gpioinfo("pin=%u direction=%s\n", pin, (direction == IOEXPANDER_DIRECTION_IN) ? "IN" : "OUT"); DEBUGASSERT(priv != NULL && pin < CONFIG_IOEXPANDER_NPINS); /* Get exclusive access to the I/O Expander */ ret = nxmutex_lock(&priv->lock); if (ret < 0) { return ret; } /* Set the pin direction in the I/O Expander */ #warning Missing logic nxmutex_unlock(&priv->lock); return ret; } /**************************************************************************** * Name: skel_option * * Description: * Set pin options. Required. * Since all IO expanders have various pin options, this API allows setting * pin options in a flexible way. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin to alter in this call * opt - One of the IOEXPANDER_OPTION_ macros * val - The option's value * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int skel_option(FAR struct ioexpander_dev_s *dev, uint8_t pin, int opt, FAR void *value) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; int ret = -ENOSYS; gpioinfo("addr=%02x pin=%u option=%u\n", priv->addr, pin, opt); DEBUGASSERT(priv != NULL); /* Check for pin polarity inversion. */ if (opt == IOEXPANDER_OPTION_INVERT) { /* Get exclusive access to the I/O Expander */ ret = nxmutex_lock(&priv->lock); if (ret < 0) { return ret; } /* Set the pin option */ #warning Missing logic nxmutex_unlock(&priv->lock); } return ret; } /**************************************************************************** * Name: skel_writepin * * Description: * Set the pin level. Required. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin to alter in this call * val - The pin level. Usually TRUE will set the pin high, * except if OPTION_INVERT has been set on this pin. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int skel_writepin(FAR struct ioexpander_dev_s *dev, uint8_t pin, bool value) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; int ret; gpioinfo("pin=%u value=%u\n", pin, value); DEBUGASSERT(priv != NULL && pin < CONFIG_IOEXPANDER_NPINS); /* Get exclusive access to the I/O Expander */ ret = nxmutex_lock(&priv->lock); if (ret < 0) { return ret; } /* Write the pin value */ #warning Missing logic nxmutex_unlock(&priv->lock); return ret; } /**************************************************************************** * Name: skel_readpin * * Description: * Read the actual PIN level. This can be different from the last value * written to this pin. Required. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin * valptr - Pointer to a buffer where the pin level is stored. Usually TRUE * if the pin is high, except if OPTION_INVERT has been set on * this pin. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int skel_readpin(FAR struct ioexpander_dev_s *dev, uint8_t pin, FAR bool *value) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; int ret; gpioinfo("pin=%u\n", priv->addr); DEBUGASSERT(priv != NULL && pin < CONFIG_IOEXPANDER_NPINS && value != NULL); /* Get exclusive access to the I/O Expander */ ret = nxmutex_lock(&priv->lock); if (ret < 0) { return ret; } /* Read the pin value */ #warning Missing logic /* Return the pin value via the value pointer */ #warning Missing logic nxmutex_unlock(&priv->lock); return ret; } /**************************************************************************** * Name: skel_readbuf * * Description: * Read the buffered pin level. * This can be different from the actual pin state. Required. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin * valptr - Pointer to a buffer where the level is stored. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ static int skel_readbuf(FAR struct ioexpander_dev_s *dev, uint8_t pin, FAR bool *value) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; int ret; /* Get exclusive access to the I/O Expander */ ret = nxmutex_lock(&priv->lock); if (ret < 0) { return ret; } /* Read the buffered pin level */ #warning Missing logic nxmutex_unlock(&priv->lock); return ret; } /**************************************************************************** * Name: skel_getmultibits * * Description: * Read multiple bits from I/O Expander registers. * ****************************************************************************/ #ifdef CONFIG_IOEXPANDER_MULTIPIN static int skel_getmultibits(FAR struct skel_dev_s *priv, FAR uint8_t *pins, FAR bool *values, int count) { ioe_pinset_t pinset; int pin; int ret = OK; int i; /* Read the pinset from the IO-Expander hardware */ #warning Missing logic /* Read the requested bits */ for (i = 0; i < count; i++) { pin = pins[i]; if (pin >= CONFIG_IOEXPANDER_NPINS) { return -ENXIO; } values[i] = (((pinset >> pin) & 1) != 0); } return OK; } #endif /**************************************************************************** * Name: skel_multiwritepin * * Description: * Set the pin level for multiple pins. This routine may be faster than * individual pin accesses. Optional. * * Input Parameters: * dev - Device-specific state data * pins - The list of pin indexes to alter in this call * val - The list of pin levels. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ #ifdef CONFIG_IOEXPANDER_MULTIPIN static int skel_multiwritepin(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; ioe_pinset_t pinset; int pin; int ret; int i; /* Get exclusive access to the I/O Expander */ ret = nxmutex_lock(&priv->lock); if (ret < 0) { return ret; } /* Read the pinset from the IO-Expander hardware */ #warning Missing logic /* Apply the user defined changes */ for (i = 0; i < count; i++) { pin = pins[i]; if (pin >= CONFIG_IOEXPANDER_NPINS) { nxmutex_unlock(&priv->lock); return -ENXIO; } if (values[i]) { pinset |= ((ioe_pinset_t)1 << pin); } else { pinset &= ~((ioe_pinset_t)1 << pin); } } /* Now write back the new pins states */ #warning Missing logic nxmutex_unlock(&priv->lock); return ret; } #endif /**************************************************************************** * Name: skel_multireadpin * * Description: * Read the actual level for multiple pins. This routine may be faster than * individual pin accesses. Optional. * * Input Parameters: * dev - Device-specific state data * pin - The list of pin indexes to read * valptr - Pointer to a buffer where the pin levels are stored. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ #ifdef CONFIG_IOEXPANDER_MULTIPIN static int skel_multireadpin(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; int ret; gpioinfo("count=%u\n", count); DEBUGASSERT(priv != NULL && pins != NULL && values != NULL && count > 0); /* Get exclusive access to the I/O Expander */ ret = nxmutex_lock(&priv->lock); if (ret < 0) { return ret; } ret = skel_getmultibits(priv, pins, values, count); nxmutex_unlock(&priv->lock); return ret; } #endif /**************************************************************************** * Name: skel_multireadbuf * * Description: * Read the buffered level of multiple pins. This routine may be faster * than individual pin accesses. Optional. * * Input Parameters: * dev - Device-specific state data * pin - The index of the pin * valptr - Pointer to a buffer where the buffered levels are stored. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ #ifdef CONFIG_IOEXPANDER_MULTIPIN static int skel_multireadbuf(FAR struct ioexpander_dev_s *dev, FAR uint8_t *pins, FAR bool *values, int count) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; int ret; gpioinfo("count=%u\n", count); DEBUGASSERT(priv != NULL && pins != NULL && values != NULL && count > 0); /* Get exclusive access to the I/O Expander */ ret = nxmutex_lock(&priv->lock); if (ret < 0) { return ret; } ret = skel_getmultibits(priv, pins, values, count); nxmutex_unlock(&priv->lock); return ret; } #endif /**************************************************************************** * Name: skel_attach * * Description: * Attach a pin interrupt callback function. * * Input Parameters: * dev - Device-specific state data * pinset - The set of pin events that will generate the callback * callback - The pointer to callback function. NULL will detach the * callback. * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ #ifdef CONFIG_IOEXPANDER_INT_ENABLE static int skel_attach(FAR struct ioexpander_dev_s *dev, ioe_pinset_t pinset, ioe_callback_t callback) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; int ret; int i; /* Get exclusive access to the I/O Expander */ ret = nxmutex_lock(&priv->lock); if (ret < 0) { return ret; } /* Find and available in entry in the callback table */ ret = -ENOSPC; for (i = 0; i < CONFIG_SKELETON_INT_NCALLBACKS; i++) { /* Is this entry available (i.e., no callback attached) */ if (priv->cb[i].cbfunc == NULL) { /* Yes.. use this entry */ priv->cb[i].pinset = pinset; priv->cb[i].cbfunc = callback; ret = OK; } } /* Add this callback to the table */ nxmutex_unlock(&priv->lock); return ret; } #endif /**************************************************************************** * Name: skel_detach_detach * * Description: * Detach and disable a pin interrupt callback function. * * Input Parameters: * dev - Device-specific state data * handle - The non-NULL opaque value return by skel_attach_attch() * * Returned Value: * 0 on success, else a negative error code * ****************************************************************************/ #ifdef CONFIG_IOEXPANDER_INT_ENABLE static int skel_detach(FAR struct ioexpander_dev_s *dev, FAR void *handle) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; FAR struct skel_callback_s *cb = (FAR struct skel_callback_s *)handle; DEBUGASSERT(priv != NULL && cb != NULL); DEBUGASSERT((uintptr_t)cb >= (uintptr_t)&priv->cb[0] && (uintptr_t)cb <= (uintptr_t)&priv->cb[CONFIG_SKELETON_INT_NCALLBACKS - 1]); UNUSED(priv); cb->pinset = 0; cb->cbfunc = NULL; cb->cbarg = NULL; return OK; } #endif /**************************************************************************** * Name: skel_irqworker * * Description: * Handle GPIO interrupt events (this function actually executes in the * context of the worker thread). * ****************************************************************************/ #ifdef CONFIG_IOEXPANDER_INT_ENABLE static void skel_irqworker(void *arg) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)arg; ioe_pinset_t pinset; int ret; int i; /* Read the pinset from the IO-Expander hardware */ #warning Missing logic /* Perform pin interrupt callbacks */ for (i = 0; i < CONFIG_SKELETON_INT_NCALLBACKS; i++) { /* Is this entry valid (i.e., callback attached)? If so, did andy of * the requested pin interrupts occur? */ if (priv->cb[i].cbfunc != NULL) { /* Did any of the requested pin interrupts occur? */ ioe_pinset_t match = pinset & priv->cb[i].pinset; if (match != 0) { /* Yes.. perform the callback */ priv->cb[i].cbfunc(&priv->dev, match); } } } /* Re-enable interrupts */ #warning Missing logic } #endif /**************************************************************************** * Name: skel_interrupt * * Description: * Handle GPIO interrupt events (this function executes in the * context of the interrupt). * * NOTE: A more typical prototype for an interrupt handler would be: * * int skel_interrupt(int irq, FAR void *context, FAR void *arg) * * However, it is assume that the lower half, board specific interface * can provide intercept the actual interrupt, and call this function with * the arg that can be mapped to the provide driver structure instance. * * Presumably the lower level interface provides an attach() method that * provides both the address of skel_interrupt() as well as the arg value. * ****************************************************************************/ #ifdef CONFIG_IOEXPANDER_INT_ENABLE static void skel_interrupt(FAR void *arg) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)arg; DEBUGASSERT(priv != NULL); /* Defer interrupt processing to the worker thread. This is not only * much kinder in the use of system resources but is probably necessary * to access the I/O expander device. * * Notice that further GPIO interrupts are disabled until the work is * actually performed. This is to prevent overrun of the worker thread. * Interrupts are re-enabled in skel_irqworker() when the work is * completed. */ if (work_available(&priv->work)) { /* Disable interrupts */ #warning Missing logic /* Schedule interrupt related work on the high priority worker * thread. */ work_queue(HPWORK, &priv->work, skel_irqworker, (FAR void *)priv, 0); } return OK; } #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: skel_initialize * * Description: * Initialize a I/O Expander device. * * NOTE: There are no arguments to the initialization function this * skeleton example. Typical implementations take two arguments: * * 1) A reference to an I2C or SPI interface used to interactive with the * device, and * 2) A read-only configuration structure that provides things like: I2C * or SPI characteristics and callbacks to attach, enable, and disable * interrupts. * ****************************************************************************/ FAR struct ioexpander_dev_s *skel_initialize(void) { FAR struct skel_dev_s *priv; #ifdef CONFIG_skeleton_MULTIPLE /* Allocate the device state structure */ priv = (FAR struct skel_dev_s *)kmm_zalloc(sizeof(struct skel_dev_s)); if (!priv) { gpioerr("ERROR: Failed to allocate driver instance\n"); return NULL; } #else /* Use the one-and-only I/O Expander driver instance */ priv = &g_skel; #endif /* Initialize the device state structure * NOTE: Normally you would also save the I2C/SPI device interface and * any configuration information here as well. */ priv->dev.ops = &g_skel_ops; #ifdef CONFIG_IOEXPANDER_INT_ENABLE /* Attach the I/O expander interrupt handler and enable interrupts */ #warning Missing logic #endif nxmutex_init(&priv->lock); return &priv->dev; } #endif /* CONFIG_IOEXPANDER_skeleton */