/****************************************************************************
 * arch/arm/src/stm32/stm32_eth.h
 *
 *   Copyright (C) 2009, 2011, 2015 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

#ifndef __ARCH_ARM_SRC_STM32_STM32_ETH_H
#define __ARCH_ARM_SRC_STM32_STM32_ETH_H

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include "chip.h"

#if STM32_NETHERNET > 0

#include "hardware/stm32_eth.h"

#ifndef __ASSEMBLY__

/****************************************************************************
 * Public Function Prototypes
 ****************************************************************************/

#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif

/****************************************************************************
 * Function: stm32_ethinitialize
 *
 * Description:
 *   Initialize the Ethernet driver for one interface.  If the STM32 chip
 *   supports multiple Ethernet controllers, then board specific logic must
 *   implement arm_netinitialize() and call this function to initialize the
 *   desired interfaces.
 *
 * Input Parameters:
 *   intf - In the case where there are multiple EMACs, this value
 *   identifies which EMAC is to be initialized.
 *
 * Returned Value:
 *   OK on success; Negated errno on failure.
 *
 * Assumptions:
 *
 ****************************************************************************/

#if STM32_NETHERNET > 1 || defined(CONFIG_NETDEV_LATEINIT)
int stm32_ethinitialize(int intf);
#endif

/****************************************************************************
 * Function: stm32_phy_boardinitialize
 *
 * Description:
 *   Some boards require specialized initialization of the PHY before it can
 *   be used. This may include such things as configuring GPIOs, resetting
 *   the PHY, etc.  If CONFIG_STM32_PHYINIT is defined in the configuration
 *   then the board specific logic must provide stm32_phyinitialize();  The
 *   STM32 Ethernet driver will call this function one time before it first
 *   uses the PHY.
 *
 * Input Parameters:
 *   intf - Always zero for now.
 *
 * Returned Value:
 *   OK on success; Negated errno on failure.
 *
 * Assumptions:
 *
 ****************************************************************************/

#ifdef CONFIG_STM32_PHYINIT
int stm32_phy_boardinitialize(int intf);
#endif

#undef EXTERN
#if defined(__cplusplus)
}
#endif

#endif /* __ASSEMBLY__ */
#endif /* STM32_NETHERNET > 0 */
#endif /* __ARCH_ARM_SRC_STM32_STM32_ETH_H */