/**************************************************************************** * drivers/power/smps.c * Upper-half, character driver for SMPS (switched-mode power supply) * * Copyright (C) 2017 Gregory Nutt. All rights reserved. * Author: Mateusz Szafoni * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static int smps_open(FAR struct file *filep); static int smps_close(FAR struct file *filep); static ssize_t smps_read(FAR struct file *filep, FAR char *buffer, size_t buflen); static ssize_t smps_write(FAR struct file *filep, FAR const char *buffer, size_t buflen); static int smps_ioctl(FAR struct file *filep, int cmd, unsigned long arg); /**************************************************************************** * Private Data ****************************************************************************/ static const struct file_operations smps_fops = { smps_open, /* open */ smps_close, /* close */ smps_read, /* read */ smps_write, /* write */ NULL, /* seek */ smps_ioctl, /* ioctl */ NULL /* poll */ #ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS , NULL /* unlink */ #endif }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: smps_open * * Description: * This function is called whenever the SMPS device is opened. * ****************************************************************************/ static int smps_open(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct smps_dev_s *dev = inode->i_private; uint8_t tmp; int ret; /* If the port is the middle of closing, wait until the close is finished */ ret = nxsem_wait(&dev->closesem); if (ret >= 0) { /* Increment the count of references to the device. If this the first * time that the driver has been opened for this device, then initialize * the device. */ tmp = dev->ocount + 1; if (tmp == 0) { /* More than 255 opens; uint8_t overflows to zero */ ret = -EMFILE; } else { /* Check if this is the first time that the driver has been opened. */ if (tmp == 1) { /* Yes.. perform one time hardware initialization. */ irqstate_t flags = enter_critical_section(); ret = dev->ops->setup(dev); if (ret == OK) { /* Save the new open count on success */ dev->ocount = tmp; } leave_critical_section(flags); } } nxsem_post(&dev->closesem); } return OK; } /**************************************************************************** * Name: smps_close * * Description: * This routine is called when the SMPS device is closed. * It waits for the last remaining data to be sent. * ****************************************************************************/ static int smps_close(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct smps_dev_s *dev = inode->i_private; irqstate_t flags; int ret; ret = nxsem_wait(&dev->closesem); if (ret >= 0) { /* Decrement the references to the driver. If the reference count will * decrement to 0, then uninitialize the driver. */ if (dev->ocount > 1) { dev->ocount--; nxsem_post(&dev->closesem); } else { /* There are no more references to the port */ dev->ocount = 0; /* Free the IRQ and disable the SMPS device */ flags = enter_critical_section(); /* Disable interrupts */ dev->ops->shutdown(dev); /* Disable the SMPS */ leave_critical_section(flags); nxsem_post(&dev->closesem); } } return ret; } /**************************************************************************** * Name: smps_read ****************************************************************************/ static ssize_t smps_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { return 1; } /**************************************************************************** * Name: smps_write ****************************************************************************/ static ssize_t smps_write(FAR struct file *filep, FAR const char *buffer, size_t buflen) { return 1; } /**************************************************************************** * Name: smps_ioctl ****************************************************************************/ static int smps_ioctl(FAR struct file *filep, int cmd, unsigned long arg) { FAR struct inode *inode = filep->f_inode; FAR struct smps_dev_s *dev = inode->i_private; FAR struct smps_s *smps = (FAR struct smps_s *)dev->priv; int ret; switch (cmd) { case PWRIOC_START: { /* Allow SMPS start only when some limits available * and strucutre is locked. * REVISIT: not sure if it is needed here */ if ((smps->limits.lock == false) || (smps->limits.v_in <= 0 && smps->limits.v_out <= 0 && smps->limits.i_in <= 0 && smps->limits.i_out <= 0 && smps->limits.p_in <= 0 && smps->limits.p_out <= 0 )) { pwrerr("ERROR: SMPS limits data must be set" " and locked before SMPS start\n"); ret = -EPERM; goto errout; } /* Check SMPS mode */ if (smps->opmode == SMPS_OPMODE_INIT) { pwrerr("ERROR: SMPS operation mode not specified\n"); ret = -EPERM; goto errout; } /* When constan current mode, then output current must be provided */ if (smps->opmode == SMPS_OPMODE_CC && smps->param.i_out <= 0) { pwrerr("ERROR: CC selected but i_out not specified!\n"); ret = -EPERM; goto errout; } /* When constan voltage mode, then output voltage must be provided */ if (smps->opmode == SMPS_OPMODE_CV && smps->param.v_out <= 0) { pwrerr("ERROR: CV selected but v_out not specified!\n"); ret = -EPERM; goto errout; } /* When constan power mode, then output power must be provided */ if (smps->opmode == SMPS_OPMODE_CP && smps->param.p_out <= 0) { pwrerr("ERROR: CP selected but p_out not specified!\n"); ret = -EPERM; goto errout; } /* REVISIT: something else ?? */ /* Finally, call start from lower-half driver */ ret = dev->ops->start(dev); if (ret != OK) { pwrerr("ERROR: PWRIOC_START failed %d\n", ret); } break; } case PWRIOC_STOP: { ret = dev->ops->stop(dev); if (ret != OK) { pwrerr("ERROR: PWRIOC_STOP failed %d\n", ret); } break; } case PWRIOC_SET_MODE: { uint8_t mode = ((uint8_t)arg); ret = dev->ops->mode_set(dev, mode); if (ret != OK) { pwrerr("ERROR: PWRIOC_SET_MODE failed %d\n", ret); } break; } case PWRIOC_SET_LIMITS: { FAR struct smps_limits_s *limits = (FAR struct smps_limits_s *)((uintptr_t)arg); if (smps->limits.lock == true) { pwrerr("ERROR: SMPS limits locked!\n"); ret = -EPERM; goto errout; } /* NOTE: this call must set the smps_limits_s structure */ ret = dev->ops->limits_set(dev, limits); if (ret != OK) { pwrerr("ERROR: PWRIOC_SET_LIMITS failed %d\n", ret); } break; } case PWRIOC_GET_STATE: { FAR struct smps_state_s *state = (FAR struct smps_state_s *)((uintptr_t)arg); ret = dev->ops->state_get(dev, state); if (ret != OK) { pwrerr("ERROR: PWRIOC_GET_STATE failed %d\n", ret); } break; } case PWRIOC_SET_FAULT: { uint8_t fault = ((uint8_t)arg); ret = dev->ops->fault_set(dev, fault); if (ret != OK) { pwrerr("ERROR: PWRIOC_SET_FAULT failed %d\n", ret); } break; } case PWRIOC_GET_FAULT: { uint8_t *fault = ((uint8_t*)arg); ret = dev->ops->fault_get(dev, fault); if (ret != OK) { pwrerr("ERROR: PWRIOC_GET_FAULT failed %d\n", ret); } break; } case PWRIOC_CLEAN_FAULT: { uint8_t fault = ((uint8_t)arg); ret = dev->ops->fault_clean(dev, fault); if (ret != OK) { pwrerr("ERROR: PWRIOC_CLEAN_FAULT failed %d\n", ret); } break; } case PWRIOC_SET_PARAMS: { FAR struct smps_params_s *params = (FAR struct smps_params_s *)((uintptr_t)arg); if (smps->param.lock == true) { pwrerr("ERROR: SMPS params locked!\n"); ret = -EPERM; goto errout; } if ((smps->limits.lock == false) || (smps->limits.v_in <= 0 && smps->limits.v_out <= 0 && smps->limits.i_in <= 0 && smps->limits.i_out <= 0 && smps->limits.p_in <= 0 && smps->limits.p_out <= 0 )) { pwrerr("ERROR: limits must be set prior to params!\n"); ret = -EPERM; goto errout; } /* Check output voltage configuration */ if (smps->limits.v_out > 0 && params->v_out > smps->limits.v_out) { pwrerr("ERROR: params->v_out > limits.v_out: %.2f > %.2f\n", params->v_out, smps->limits.v_out); ret = -EPERM; goto errout; } /* Check output current configuration */ if (smps->limits.i_out > 0 && params->i_out > smps->limits.i_out) { pwrerr("ERROR: params->i_out > limits.i_out: %.2f > %.2f\n", params->i_out, smps->limits.i_out); ret = -EPERM; goto errout; } /* Check output power configuration */ if (smps->limits.p_out > 0 && params->p_out > smps->limits.p_out) { pwrerr("ERROR: params->p_out > limits.p_out: %.2f > %.2f\n", params->p_out, smps->limits.p_out); ret = -EPERM; goto errout; } /* TODO: limits */ ret = dev->ops->params_set(dev, params); if (ret != OK) { pwrerr("ERROR: PWRIOC_SET_PARAMS failed %d\n", ret); } break; } default: { pwrinfo("Forwarding unrecognized cmd: %d arg: %ld\n", cmd, arg); ret = dev->ops->ioctl(dev, cmd, arg); break; } } errout: return ret; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: smps_register ****************************************************************************/ int smps_register(FAR const char *path, FAR struct smps_dev_s *dev, FAR void *lower) { int ret; DEBUGASSERT(path != NULL && dev != NULL && lower != NULL); DEBUGASSERT(dev->ops != NULL); /* For safety reason, when some necessary low-level logic is not provided, * system should fail before low-level hardware initialization, so: * - all ops are checked here, before character driver registration * - all ops must be provided, even if not used */ DEBUGASSERT(dev->ops->setup != NULL); DEBUGASSERT(dev->ops->shutdown != NULL); DEBUGASSERT(dev->ops->stop != NULL); DEBUGASSERT(dev->ops->start != NULL); DEBUGASSERT(dev->ops->params_set != NULL); DEBUGASSERT(dev->ops->mode_set != NULL); DEBUGASSERT(dev->ops->limits_set != NULL); DEBUGASSERT(dev->ops->fault_set != NULL); DEBUGASSERT(dev->ops->state_get != NULL); DEBUGASSERT(dev->ops->fault_get != NULL); DEBUGASSERT(dev->ops->fault_clean != NULL); DEBUGASSERT(dev->ops->ioctl != NULL); /* Initialize the SMPS device structure */ dev->ocount = 0; /* Initialize semaphores */ nxsem_init(&dev->closesem, 0, 1); /* Connect SMPS driver with lower level interface */ dev->lower = lower; /* Register the SMPS character driver */ ret = register_driver(path, &smps_fops, 0444, dev); if (ret < 0) { nxsem_destroy(&dev->closesem); } return ret; }