/************************************************************************************** * drivers/lcd/ssd1305.h * Definitions for the Solomon Systech SSD1305 132x64 Dot Matrix OLED/PLED * Segment/Common Driver with C * * Copyright (C) 2010 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * References: SSD1305.pdf, "Solomon Systech SSD1305 132x64 Dot Matrix OLED/PLED * Segment/Common Driver with Controller," Solomon Systech Limited, * http://www.solomon-systech.com, May, 2008. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * **************************************************************************************/ #ifndef __DRIVERS_LCD_SSD1305_H #define __DRIVERS_LCD_SSD1305_H /************************************************************************************** * Included Files **************************************************************************************/ /************************************************************************************** * Pre-processor Definitions **************************************************************************************/ /* General Definitions ******************************************************/ #define SSD1305_COLORA 0 #define SSD1305_COLORB 1 #define SSD1305_COLORC 2 #define SSD1305_COLORD 3 /* Fundamental Commands *****************************************************/ #define SSD1305_SETCOLL 0x00 /* 0x00-0x0f: Set lower column address */ # define SSD1305_COLL_MASK 0x0f #define SSD1305_SETCOLH 0x10 /* 0x10-0x1f: Set higher column address */ # define SSD1305_COLH_MASK 0x0f #define SSD1305_ADDRMODE 0x20 /* 0x20: Set memory address mode */ # define SSD1305_ADDRMODE_HOR 0x00 /* Data 1: Set horizontal address mode */ # define SSD1305_ADDRMODE_VIRT 0x01 /* Data 1: Set virtual address mode */ # define SSD1305_ADDRMODE_PAGE 0x02 /* Data 1: Set page address mode */ #define SSD1305_SETCOLADDR 0x21 /* 0x21: Set column address */ /* Data 1: Column start address: 0-131 */ /* Data 2: Column end address: 0-131 */ #define SSD1305_SETPAGEADDR 0x22 /* 0x22: Set page address */ /* Data 1: Page start address: 0x00-0x7d */ /* Data 2: Page end address: 0x00-0x7d */ #define SSD1305_SETSTARTLINE 0x40 /* 0x40-7f: Set display start line */ # define SSD1305_STARTLINE_MASK 0x3f #define SSD1305_SETCONTRAST 0x81 /* 0x81: Set contrast control */ /* Data 1: Set 1 of 256 contrast steps */ #define SSD1305_SETBRIGHTNESS 0x82 /* 0x82: Set brightness */ /* Data 1: Set 1 of 256 contrast steps */ #define SSD1305_SETLUT 0x91 /* 0x01: Set lookup table */ /* Data 1: Pulse width: 31-63 */ /* Data 2: Color A: 31-63 */ /* Data 3: Color B: 31-63 */ /* Data 4: Color C: 31-63 */ #define SSD1305_SETBANKCOLOR1 0x92 /* 0x92: Set bank 1-16 color */ # define SSD1305_SETBANK1(c) (c) /* Data 1, Bits 0-1: Bank 1 color */ # define SSD1305_SETBANK2(c) (c << 2) /* Data 1, Bits 2-3: Bank 2 color */ # define SSD1305_SETBANK3(c) (c << 4) /* Data 1, Bits 4-5: Bank 3 color */ # define SSD1305_SETBANK4(c) (c << 6) /* Data 1, Bits 6-7: Bank 4 color */ # define SSD1305_SETBANK5(c) (c) /* Data 2, Bits 0-1: Bank 5 color */ # define SSD1305_SETBANK6(c) (c << 2) /* Data 2, Bits 2-3: Bank 6 color */ # define SSD1305_SETBANK7(c) (c << 4) /* Data 2, Bits 4-5: Bank 7 color */ # define SSD1305_SETBANK8(c) (c << 6) /* Data 2, Bits 6-7: Bank 8 color */ # define SSD1305_SETBANK9(c) (c) /* Data 3, Bits 0-1: Bank 9 color */ # define SSD1305_SETBANK10(c) (c << 2) /* Data 3, Bits 2-3: Bank 10 color */ # define SSD1305_SETBANK11(c) (c << 4) /* Data 3, Bits 4-5: Bank 11 color */ # define SSD1305_SETBANK12(c) (c << 6) /* Data 3, Bits 6-7: Bank 12 color */ # define SSD1305_SETBANK13(c) (c) /* Data 4, Bits 0-1: Bank 13 color */ # define SSD1305_SETBANK14(c) (c << 2) /* Data 4, Bits 2-3: Bank 14 color */ # define SSD1305_SETBANK15(c) (c << 4) /* Data 4, Bits 4-5: Bank 15 color */ # define SSD1305_SETBANK16(c) (c << 6) /* Data 4, Bits 6-7: Bank 16 color */ #define SSD1305_SETBANKCOLOR2 0x93 /* 0x93: Set bank 17-32 color */ # define SSD1305_SETBANK17(c) (c) /* Data 1, Bits 0-1: Bank 17 color */ # define SSD1305_SETBANK18(c) (c << 2) /* Data 1, Bits 2-3: Bank 18 color */ # define SSD1305_SETBANK19(c) (c << 4) /* Data 1, Bits 4-5: Bank 19 color */ # define SSD1305_SETBANK20(c) (c << 6) /* Data 1, Bits 6-7: Bank 20 color */ # define SSD1305_SETBANK21(c) (c) /* Data 2, Bits 0-1: Bank 21 color */ # define SSD1305_SETBANK22(c) (c << 2) /* Data 2, Bits 2-3: Bank 22 color */ # define SSD1305_SETBANK23(c) (c << 4) /* Data 2, Bits 4-5: Bank 23 color */ # define SSD1305_SETBANK24(c) (c << 6) /* Data 2, Bits 6-7: Bank 24 color */ # define SSD1305_SETBANK25(c) (c) /* Data 3, Bits 0-1: Bank 25 color */ # define SSD1305_SETBANK26(c) (c << 2) /* Data 3, Bits 2-3: Bank 26 color */ # define SSD1305_SETBANK27(c) (c << 4) /* Data 3, Bits 4-5: Bank 27 color */ # define SSD1305_SETBANK28(c) (c << 6) /* Data 3, Bits 6-7: Bank 28 color */ # define SSD1305_SETBANK29(c) (c) /* Data 4, Bits 0-1: Bank 29 color */ # define SSD1305_SETBANK30(c) (c << 2) /* Data 4, Bits 2-3: Bank 30 color */ # define SSD1305_SETBANK31(c) (c << 4) /* Data 4, Bits 4-5: Bank 31 color */ # define SSD1305_SETBANK32(c) (c << 6) /* Data 4, Bits 6-7: Bank 32 color */ #define SSD1305_MAPCOL0 0xa0 /* 0xa0: Column address 0 is mapped to SEG0 */ #define SSD1305_MAPCOL131 0xa1 /* 0xa1: Column address 131 is mapped to SEG0 */ #define SSD1305_DISPRAM 0xa4 /* 0xa4: Resume to RAM content display */ #define SSD1305_DISPENTIRE 0xa5 /* 0xa5: Entire display ON */ #define SSD1305_DISPNORMAL 0xa6 /* 0xa6: Normal display */ #define SSD1305_DISPINVERTED 0xa7 /* 0xa7: Inverse display */ #define SSD1305_SETMUX 0xa8 /* 0xa8: Set Multiplex Ratio*/ /* Data 1: MUX ratio -1: 15-63 */ #define SSD1305_DIMMODE 0xab /* 0xab: Dim mode setting */ /* Data 1: Reserved, must be zero */ /* Data 2: Contrast for bank1: 0-255 */ /* Data 3: Brightness for color bank: 0-255 */ #define SSD1305_MSTRCONFIG 0xad /* 0xad: Master configuration */ # define SSD1305_MSTRCONFIG_EXTVCC 0x8e /* Data 1: Select external Vcc */ #define SSD1305_DISPONDIM 0xac /* 0xac: Display ON in dim mode */ #define SSD1305_DISPOFF 0xae /* 0xae: Display OFF (sleep mode) */ #define SSD1305_DISPON 0xaf /* 0xaf: Display ON in normal mode */ #define SSD1305_SETPAGESTART 0xb0 /* 0xb0-b7: Set page start address */ # define SSD1305_PAGESTART_MASK 0x07 #define SSD1305_SETCOMNORMAL 0xc0 /* 0xc0: Set COM output, normal mode */ #define SSD1305_SETCOMREMAPPED 0xc8 /* 0xc8: Set COM output, remapped mode */ #define SSD1305_SETOFFSET 0xd3 /* 0xd3: Set display offset */ /* Data 1: Vertical shift by COM: 0-63 */ #define SSD1305_SETDCLK 0xd5 /* 0xd5: Set display clock divide ratio/oscillator */ # define SSD1305_DCLKDIV_SHIFT (0) /* Data 1, Bits 0-3: DCLK divide ratio/frequency*/ # define SSD1305_DCLKDIV_MASK 0x0f # define SSD1305_DCLKFREQ_SHIFT (4) /* Data 1, Bits 4-7: DCLK divide oscillator frequency */ # define SSD1305_DCLKFREQ_MASK 0xf0 #define SSD1305_SETCOLORMODE 0xd8 /* 0xd: Set area color and low power display modes */ # define SSD1305_COLORMODE_MONO 0x00 /* Data 1, Bits 4-5: 00=monochrome */ # define SSD1305_COLORMODE_COLOR 0x30 /* Data 1, Bits 4-5: 11=area color enable */ # define SSD1305_POWERMODE_NORMAL 0x00 /* Data 1, Bits 0,2: 00=normal power mode */ # define SSD1305_POWERMODE_LOW 0x05 /* Data 1, Bits 0,2: 11=low power display mode */ #define SSD1305_SETPRECHARGE 0xd9 /* 0xd9: Set pre-charge period */ # define SSD1305_PHASE1_SHIFT (0) /* Data 1, Bits 0-3: Phase 1 period of up to 15 DCLK clocks */ # define SSD1305_PHASE1_MASK 0x0f # define SSD1305_PHASE2_SHIFT (4) /* Data 1, Bits 4-7: Phase 2 period of up to 15 DCLK clocks */ # define SSD1305_PHASE2_MASK 0xf0 #define SSD1305_SETCOMCONFIG 0xda /* 0xda: Set COM configuration */ # define SSD1305_COMCONFIG_SEQ 0x02 /* Data 1, Bit 4: 0=Sequential COM pin configuration */ # define SSD1305_COMCONFIG_ALT 0x12 /* Data 1, Bit 4: 1=Alternative COM pin configuration */ # define SSD1305_COMCONFIG_NOREMAP 0x02 /* Data 1, Bit 5: 0=Disable COM Left/Right remap */ # define SSD1305_COMCONFIG_REMAP 0x22 /* Data 1, Bit 5: 1=Enable COM Left/Right remap */ #define SSD1305_SETVCOMHDESEL 0xdb /* 0xdb: Set VCOMH delselect level */ # define SSD1305_VCOMH_x4p3 0x00 /* Data 1: ~0.43 x Vcc */ # define SSD1305_VCOMH_x7p7 0x34 /* Data 1: ~0.77 x Vcc */ # define SSD1305_VCOMH_x8p3 0x3c /* Data 1: ~0.83 x Vcc */ #define SSD1305_ENTER_RMWMODE 0xe0 /* 0xe0: Enter the Read Modify Write mode */ #define SSD1305_NOP 0xe3 /* 0xe3: NOP Command for no operation */ #define SSD1305_EXIT_RMWMODE 0xee /* 0xee: Leave the Read Modify Write mode */ /* Graphic Acceleration Commands ********************************************/ #define SSD1305_HSCROLL_RIGHT 0x26 /* 0x26: Right horizontal scroll */ #define SSD1305_HSCROLL_LEFT 0x27 /* 0x27: Left horizontal scroll */ /* Data 1, Bits 0-2: Column scroll offset: 0-4 */ /* Data 2, Bits 0-2: Start page address: 0-7 */ #define SSD1305_HSCROLL_FRAMES6 0x00 /* Data 3, Bits 0-2: Timer interval, 000=6 frames */ #define SSD1305_HSCROLL_FRAMES32 0x01 /* Data 3, Bits 0-2: Timer interval, 001=32 frames */ #define SSD1305_HSCROLL_FRAMES64 0x02 /* Data 3, Bits 0-2: Timer interval, 010=64 frames */ #define SSD1305_HSCROLL_FRAMES128 0x03 /* Data 3, Bits 0-2: Timer interval, 011=128 frames */ #define SSD1305_HSCROLL_FRAMES3 0x04 /* Data 3, Bits 0-2: Timer interval, 100=3 frames */ #define SSD1305_HSCROLL_FRAMES4 0x05 /* Data 3, Bits 0-2: Timer interval, 101=4 frames */ #define SSD1305_HSCROLL_FRAMES2 0x06 /* Data 3, Bits 0-2: Timer interval, 110=2 frames */ /* Data 4, Bits 0-2: End page address: 0-7 */ #define SSD1305_VSCROLL_RIGHT 0x29 /* 0x26: Vertical and right horizontal scroll */ #define SSD1305_VSCROLL_LEFT 0x2a /* 0x27: Vertical and left horizontal scroll */ /* Data 1, Bits 0-2: Column scroll offset: 0-4 */ /* Data 2, Bits 0-2: Start page address: 0-7 */ #define SSD1305_VSCROLL_FRAMES6 0x00 /* Data 3, Bits 0-2: Timer interval, 000=6 frames */ #define SSD1305_VSCROLL_FRAMES32 0x01 /* Data 3, Bits 0-2: Timer interval, 001=32 frames */ #define SSD1305_VSCROLL_FRAMES64 0x02 /* Data 3, Bits 0-2: Timer interval, 010=64 frames */ #define SSD1305_VSCROLL_FRAMES128 0x03 /* Data 3, Bits 0-2: Timer interval, 011=128 frames */ #define SSD1305_VSCROLL_FRAMES3 0x04 /* Data 3, Bits 0-2: Timer interval, 100=3 frames */ #define SSD1305_VSCROLL_FRAMES4 0x05 /* Data 3, Bits 0-2: Timer interval, 101=4 frames */ #define SSD1305_VSCROLL_FRAMES2 0x06 /* Data 3, Bits 0-2: Timer interval, 110=2 frames */ /* Data 4, Bits 0-2: End page address: 0-7 */ /* Data 5, Bits 0-5: Vertical scrolling offset: 0-63 */ #define SSD1305_SCROLL_STOP 0x2e /* 0x2e: Deactivate scroll */ #define SSD1305_SCROLL_START 0x2f /* 0x2f: Activate scroll */ #define SSD1305_VSCROLL_AREA 0xa3 /* 0xa3: Set vertical scroll area */ /* Data 1: Number of rows in the top fixed area */ /* Data 1: Number of rows in the scroll area */ /* Status register bit definitions ******************************************/ #define SSD1305_STATUS_DISPOFF (1 << 6) /* Bit 6: 1=Display off */ #endif /* __DRIVERS_LCD_SSD1305_H */