############################################################################
# arch/arm/src/armv6-m/Toolchain.defs
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.  The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
# License for the specific language governing permissions and limitations
# under the License.
#
############################################################################

# Setup for the selected toolchain

#
# Handle old-style chip-specific toolchain names in the absence of
# a new-style toolchain specification, force the selection of a single
# toolchain and allow the selected toolchain to be overridden by a
# command-line selection.
#

ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_BUILDROOT)),y)
  CONFIG_ARMV6M_TOOLCHAIN ?= BUILDROOT
endif

ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIL)),y)
  CONFIG_ARMV6M_TOOLCHAIN ?= GNU_EABI
endif

ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIW)),y)
  CONFIG_ARMV6M_TOOLCHAIN ?= GNU_EABI
endif

#
# Supported toolchains
#
# TODO - It's likely that all of these toolchains now support the
#        CortexM0.  Since they are all GCC-based, we could almost
#        certainly simplify this further.
#
# Each toolchain definition should set:
#
#  CROSSDEV         The GNU toolchain triple (command prefix)
#  ARCHCPUFLAGS     CPU-specific flags selecting the instruction set
#                   options, etc.
#  MAXOPTIMIZATION  The maximum optimization level that results in
#                   reliable code generation.
#

ifeq ($(CONFIG_DEBUG_CUSTOMOPT),y)
  MAXOPTIMIZATION := $(CONFIG_DEBUG_OPTLEVEL)
endif

# NuttX buildroot under Linux or Cygwin

ifeq ($(CONFIG_ARMV6M_TOOLCHAIN),BUILDROOT)
  CROSSDEV ?= arm-nuttx-eabi-
  ARCHCPUFLAGS = -mcpu=cortex-m0 -mthumb -mfloat-abi=soft
endif

# Generic GNU EABI toolchain

ifeq ($(CONFIG_ARMV6M_TOOLCHAIN),GNU_EABI)
  CROSSDEV ?= arm-none-eabi-
  ARCHCPUFLAGS = -mcpu=cortex-m0 -mthumb -mfloat-abi=soft
endif

# Individual tools may limit the optimizatin level but, by default, the
# optimization level will be set to -Os

MAXOPTIMIZATION ?= -Os

# Default toolchain

CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E -P -x c
LD = $(CROSSDEV)ld
STRIP = $(CROSSDEV)strip --strip-unneeded
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump

# Add the builtin library

EXTRA_LIBS += -lgcc
EXTRA_LIBPATHS += -L "${dir ${shell $(CC) $(ARCHCPUFLAGS) --print-libgcc-file-name}}"

ifneq ($(CONFIG_LIBM),y)
  EXTRA_LIBS += -lm
  EXTRA_LIBPATHS += -L "${dir ${shell $(CC) $(ARCHCPUFLAGS) --print-file-name=libm.a}}"
endif

ifeq ($(CONFIG_CXX_LIBSUPCXX),y)
  EXTRA_LIBS += -lsupc++
  EXTRA_LIBPATHS += -L "${dir ${shell $(CC) $(ARCHCPUFLAGS) --print-file-name=libsupc++.a}}"
endif