/************************************************************************************ * arch/hc/include/hcs12/irq.h * * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ************************************************************************************/ /* This file should never be included directed but, rather, * only indirectly through nuttx/irq.h */ #ifndef __ARCH_HC_INCLUDE_HCS12_IRQ_H #define __ARCH_HC_INCLUDE_HCS12_IRQ_H /************************************************************************************ * Included Files ************************************************************************************/ #include #include /************************************************************************************ * Pre-processor Definitions ************************************************************************************/ /* CCR bit definitions */ #define HCS12_CCR_C (1 << 0) /* Bit 0: Carry/Borrow status bit */ #define HCS12_CCR_V (1 << 1) /* Bit 1: Two’s complement overflow status bit */ #define HCS12_CCR_Z (1 << 2) /* Bit 2: Zero status bit */ #define HCS12_CCR_N (1 << 3) /* Bit 3: Negative status bit */ #define HCS12_CCR_I (1 << 4) /* Bit 4: Maskable interrupt control bit */ #define HCS12_CCR_H (1 << 5) /* Bit 5: Half-carry status bit */ #define HCS12_CCR_X (1 << 6) /* Bit 6: Non-maskable interrupt control bit */ #define HCS12_CCR_S (1 << 7) /* Bit 7: STOP instruction control bit */ /************************************************************************************ * Register state save strucure * Low Address <-- SP after state save * [PPAGE] * [soft regisers] * XYH * XYL * ZH * ZL * TMPH * TMPL * FRAMEH * FRAMEL * SP <-- SP after interrupt * CCR * B * A * XH * XL * YH * YL * PCH * High Address PCL <-- SP before interrupt * ************************************************************************************/ /* Byte offsets */ /* PPAGE register (only in banked mode) */ #ifndef CONFIG_HCS12_NONBANKED # define REG_PPAGE 0 # define REG_FIRST_SOFTREG 1 #else # define REG_FIRST_SOFTREG 0 #endif /* Soft registers (as configured) */ #if CONFIG_HCS12_MSOFTREGS > 2 # error "Need to save more registers" #elif CONFIG_HCS12_MSOFTREGS == 2 # define REG_SOFTREG1 REG_FIRST_SOFTREG # define REG_SOFTREG2 (REG_FIRST_SOFTREG+2) # define REG_FIRST_HARDREG (REG_FIRST_SOFTREG+4) #elif CONFIG_HCS12_MSOFTREGS == 1 # define REG_SOFTREG1 REG_FIRST_SOFTREG # define REG_FIRST_HARDREG (REG_FIRST_SOFTREG+2) #else # define REG_FIRST_HARDREG REG_FIRST_SOFTREG #endif #define REG_XY REG_FIRST_HARDREG #define REG_Z (REG_FIRST_HARDREG+2) # define REG_ZH (REG_FIRST_HARDREG+2) # define REG_ZL (REG_FIRST_HARDREG+3) #define REG_TMP (REG_FIRST_HARDREG+4) # define REG_TMPH (REG_FIRST_HARDREG+4) # define REG_TMPL (REG_FIRST_HARDREG+5) #define REG_FRAME (REG_FIRST_HARDREG+6) # define REG_FRAMEH (REG_FIRST_HARDREG+6) # define REG_FRAMEL (REG_FIRST_HARDREG+7) /* Stack pointer before the interrupt */ #define REG_SP (REG_FIRST_HARDREG+8) # define REG_SPH (REG_FIRST_HARDREG+8) # define REG_SPL (REG_FIRST_HARDREG+9) /* On entry into an I- or X-interrupt, into an SWI, or into an undefined instruction * interrupt, the stack frame created by hardware looks like: * * Low Address <-- SP after interrupt * CCR * B * A * XH * XL * YH * YL * PCH * High Address PCL <-- SP before interrupt */ #define REG_CCR (REG_FIRST_HARDREG+10) #define REG_BA (REG_FIRST_HARDREG+11) # define REG_B (REG_FIRST_HARDREG+11) # define REG_A (REG_FIRST_HARDREG+12) #define REG_X (REG_FIRST_HARDREG+13) # define REG_XH (REG_FIRST_HARDREG+13) # define REG_XL (REG_FIRST_HARDREG+14) #define REG_Y (REG_FIRST_HARDREG+15) # define REG_YH (REG_FIRST_HARDREG+15) # define REG_YL (REG_FIRST_HARDREG+16) #define REG_PC (REG_FIRST_HARDREG+17) # define REG_PCH (REG_FIRST_HARDREG+17) # define REG_PCL (REG_FIRST_HARDREG+18) #define TOTALFRAME_SIZE (REG_FIRST_HARDREG+17) #define INTFRAME_SIZE 9 #define XCPTCONTEXT_REGS TOTALFRAME_SIZE /************************************************************************************ * Public Types ************************************************************************************/ /* This structure defines the way the registers are stored. */ #ifndef __ASSEMBLY__ struct xcptcontext { uint8_t regs[XCPTCONTEXT_REGS]; }; /**************************************************************************** * Inline functions ****************************************************************************/ /* Enable/Disable interrupts */ #define ienable() __asm("cli"); #define idisable() __asm("orcc #0x10") #define xenable() __asm("andcc #0xbf") #define xdisable() __asm("orcc #0x40") /* Get the current value of the stack pointer */ static inline uint16_t up_getsp(void) { uint16_t ret; __asm__ ( "\tsts %0\n" : "=m"(ret) : ); return ret; } /* Get the current value of the CCR */ static inline irqstate_t up_getccr(void) { irqstate_t ccr; __asm__ ( "\ttpa\n" "\tstaa %0\n" : "=m"(ccr) : ); return ccr; } /* Save the current interrupt enable state & disable IRQs */ static inline irqstate_t irqsave(void) { irqstate_t ccr; __asm__ ( "\ttpa\n" "\tstaa %0\n" "\torcc #0x50\n" : "=m"(ccr) : ); return ccr; } /* Restore saved interrupt state */ static inline void irqrestore(irqstate_t flags) { /* Should interrupts be enabled? */ if ((flags & HCS12_CCR_I) == 0) { /* Yes.. unmask I- and Z-interrupts */ __asm("andcc #0xaf"); } } /* System call */ static inline void system_call3(unsigned int nbr, uintptr_t parm1, uintptr_t parm2, uintptr_t parm3) { /* To be provided */ /* __asm("swi") */ } /************************************************************************************ * Public Data ************************************************************************************/ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif /************************************************************************************ * Public Functions ************************************************************************************/ #undef EXTERN #ifdef __cplusplus } #endif #endif /* __ASSEMBLY__ */ #endif /* __ARCH_HC_INCLUDE_HCS12_IRQ_H */