/**************************************************************************** * net/icmpv6/icmpv6_sendto.c * * Copyright (C) 2017 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "utils/utils.h" #include "socket/socket.h" #include "netdev/netdev.h" #include "devif/devif.h" #include "inet/inet.h" #include "arp/arp.h" #include "icmpv6/icmpv6.h" #ifdef CONFIG_NET_ICMPv6_SOCKET /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define IPv6BUF \ ((struct ipv6_hdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev)]) #define ICMPv6BUF \ ((struct icmpv6_echo_request_s *)&dev->d_buf[NET_LL_HDRLEN(dev) + IPv6_HDRLEN]) /**************************************************************************** * Private Types ****************************************************************************/ struct icmpv6_sendto_s { FAR struct devif_callback_s *snd_cb; /* Reference to callback instance */ FAR struct socket *snd_sock; /* IPPROTO_ICMP6 socket structure */ sem_t snd_sem; /* Use to manage the wait for send complete */ clock_t snd_time; /* Start time for determining timeouts */ struct in6_addr snd_toaddr; /* The peer to send the request to */ FAR const uint8_t *snd_buf; /* ICMPv6 header + data payload */ uint16_t snd_buflen; /* Size of the ICMPv6 header + data payload */ int16_t snd_result; /* 0: success; <0:negated errno on fail */ }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: sendto_timeout * * Description: * Check for send timeout. * * Input Parameters: * pstate - Reference to instance ot sendto state structure * * Returned Value: * true: timeout false: no timeout * * Assumptions: * The network is locked * ****************************************************************************/ #ifdef CONFIG_NET_SOCKOPTS static inline int sendto_timeout(FAR struct icmpv6_sendto_s *pstate) { FAR struct socket *psock; /* Check for a timeout configured via setsockopts(SO_SNDTIMEO). * If none... we will let the send wait forever. */ psock = pstate->snd_sock; if (psock != NULL && psock->s_sndtimeo != 0) { /* Check if the configured timeout has elapsed */ return net_timeo(pstate->snd_time, psock->s_sndtimeo); } /* No timeout */ return false; } #endif /* CONFIG_NET_SOCKOPTS */ /**************************************************************************** * Name: sendto_request * * Description: * Setup to send an ICMPv6 request packet * * Input Parameters: * dev - The device driver structure to use in the send operation * pstate - Reference to an instance of the ICMPv6 sendto state structure * * Returned Value: * None * * Assumptions: * The network is locked. * ****************************************************************************/ static void sendto_request(FAR struct net_driver_s *dev, FAR struct icmpv6_sendto_s *pstate) { FAR struct ipv6_hdr_s *ipv6; FAR struct icmpv6_echo_request_s *icmpv6; IFF_SET_IPv6(dev->d_flags); /* The total length to send is the size of the application data plus the * IP and ICMPv6 headers (and, eventually, the Ethernet header) */ dev->d_len = IPv6_HDRLEN + pstate->snd_buflen; /* The total size of the data (including the size of the ICMPv6 header) */ dev->d_sndlen += pstate->snd_buflen; /* Set up the IPv6 header (most is probably already in place) */ ipv6 = IPv6BUF; ipv6->vtc = 0x60; /* Version/traffic class (MS) */ ipv6->tcf = 0; /* Traffic class(LS)/Flow label(MS) */ ipv6->flow = 0; /* Flow label (LS) */ ipv6->len[0] = (pstate->snd_buflen >> 8); /* Length excludes the IPv6 header */ ipv6->len[1] = (pstate->snd_buflen & 0xff); ipv6->proto = IP_PROTO_ICMP6; /* Next header */ ipv6->ttl = 255; /* Hop limit */ net_ipv6addr_hdrcopy(ipv6->srcipaddr, dev->d_ipv6addr); net_ipv6addr_hdrcopy(ipv6->destipaddr, pstate->snd_toaddr.s6_addr16); /* Copy the ICMPv6 request and payload into place after the IPv6 header */ icmpv6 = ICMPv6BUF; memcpy(icmpv6, pstate->snd_buf, pstate->snd_buflen); /* Calculate the ICMPv6 checksum over the ICMPv6 header and payload. */ icmpv6->chksum = 0; icmpv6->chksum = ~icmpv6_chksum(dev); if (icmpv6->chksum == 0) { icmpv6->chksum = 0xffff; } ninfo("Outgoing ICMPv6 packet length: %d (%d)\n", dev->d_len, (ipv6->len[0] << 8) | ipv6->len[1]); #ifdef CONFIG_NET_STATISTICS g_netstats.icmpv6.sent++; g_netstats.ipv6.sent++; #endif } /**************************************************************************** * Name: sendto_eventhandler * * Description: * This function is called with the network locked to perform the actual * ECHO request and/or ECHO reply actions when polled by the lower, device * interfacing layer. * * Input Parameters: * dev The structure of the network driver that generated the * event * pvconn The received packet, cast to (void *) * pvpriv An instance of struct icmpv6_sendto_s cast to (void *) * flags Set of events describing why the callback was invoked * * Returned Value: * Modified value of the input flags * * Assumptions: * The network is locked. * ****************************************************************************/ static uint16_t sendto_eventhandler(FAR struct net_driver_s *dev, FAR void *pvconn, FAR void *pvpriv, uint16_t flags) { FAR struct icmpv6_sendto_s *pstate = (struct icmpv6_sendto_s *)pvpriv; ninfo("flags: %04x\n", flags); if (pstate != NULL) { /* Check if the network is still up */ if ((flags & NETDEV_DOWN) != 0) { nerr("ERROR: Interface is down\n"); pstate->snd_result = -ENETUNREACH; goto end_wait; } /* Check: * If the outgoing packet is available (it may have been claimed * by a sendto event handler serving a different thread) * -OR- * If the output buffer currently contains unprocessed incoming * data. * -OR- * If we have already sent the ECHO request * * In the first two cases, we will just have to wait for the next * polling cycle. */ if (dev->d_sndlen <= 0 && /* Packet available */ (flags & ICMPv6_NEWDATA) == 0) /* No incoming data */ { /* Send the ICMPv6 echo request. */ ninfo("Send ICMPv6 ECHO request\n"); sendto_request(dev, pstate); pstate->snd_result = OK; goto end_wait; } #ifdef CONFIG_NET_SOCKOPTS /* Check if the selected timeout has elapsed */ if (sendto_timeout(pstate)) { int failcode; /* Check if this device is on the same network as the destination * device. */ if (!net_ipv6addr_maskcmp(pstate->snd_toaddr.s6_addr16, dev->d_ipv6addr, dev->d_ipv6netmask)) { /* Destination address was not on the local network served by this * device. If a timeout occurs, then the most likely reason is * that the destination address is not reachable. */ nerr("ERROR: Not reachable\n"); failcode = -ENETUNREACH; } else { nerr("ERROR: sendto() timeout\n"); failcode = -ETIMEDOUT; } /* Report the failure */ pstate->snd_result = failcode; goto end_wait; } #endif /* Continue waiting */ } return flags; end_wait: ninfo("Resuming\n"); /* Do not allow any further callbacks */ pstate->snd_cb->flags = 0; pstate->snd_cb->priv = NULL; pstate->snd_cb->event = NULL; /* Wake up the waiting thread */ nxsem_post(&pstate->snd_sem); return flags; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: icmpv6_sendto * * Description: * Implements the sendto() operation for the case of the IPPROTO_ICMP6 * socket. The 'buf' parameter points to a block of memory that includes * an ICMPv6 request header, followed by any payload that accompanies the * request. The 'len' parameter includes both the size of the ICMPv6 header * and the following payload. * * Input Parameters: * psock A pointer to a NuttX-specific, internal socket structure * buf Data to send * len Length of data to send * flags Send flags * to Address of recipient * tolen The length of the address structure * * Returned Value: * On success, returns the number of characters sent. On error, a negated * errno value is returned (see send_to() for the list of appropriate error * values. * ****************************************************************************/ ssize_t icmpv6_sendto(FAR struct socket *psock, FAR const void *buf, size_t len, int flags, FAR const struct sockaddr *to, socklen_t tolen) { FAR const struct sockaddr_in6 *inaddr; FAR struct net_driver_s *dev; FAR struct icmpv6_conn_s *conn; FAR struct icmpv6_echo_request_s *icmpv6; struct icmpv6_sendto_s state; int ret; /* Some sanity checks */ DEBUGASSERT(psock != NULL && psock->s_conn != NULL && buf != NULL && to != NULL); if (len < ICMPv6_HDRLEN || tolen < sizeof(struct sockaddr_in6)) { return -EINVAL; } conn = psock->s_conn; inaddr = (FAR const struct sockaddr_in6 *)to; /* Get the device that will be used to route this ICMPv6 ECHO request */ dev = netdev_findby_ipv6addr(g_ipv6_unspecaddr, inaddr->sin6_addr.s6_addr16); if (dev == NULL) { nerr("ERROR: Not reachable\n"); ret = -ENETUNREACH; goto errout; } /* If we are no longer processing the same ping ID, then flush any pending * packets from the read-ahead buffer. * * REVISIT: How to we free up any lingering reponses if there are no * futher pings? */ icmpv6 = (FAR struct icmpv6_echo_request_s *)buf; if (icmpv6->type != ICMPv6_ECHO_REQUEST || icmpv6->id != conn->id || dev != conn->dev) { conn->id = 0; conn->nreqs = 0; conn->dev = NULL; iob_free_queue(&conn->readahead); } #ifdef CONFIG_NET_ICMPv6_NEIGHBOR /* Make sure that the IP address mapping is in the Neighbor Table */ ret = icmpv6_neighbor(inaddr->sin6_addr.s6_addr16); if (ret < 0) { nerr("ERROR: Not reachable\n"); ret = -ENETUNREACH; goto errout; } #endif /* CONFIG_NET_ICMPv6_NEIGHBOR */ /* Initialize the state structure */ /* This semaphore is used for signaling and, hence, should not have * priority inheritance enabled. */ nxsem_init(&state.snd_sem, 0, 0); nxsem_setprotocol(&state.snd_sem, SEM_PRIO_NONE); state.snd_sock = psock; /* The IPPROTO_ICMP6 socket instance */ state.snd_result = -ENOMEM; /* Assume allocation failure */ state.snd_buf = buf; /* ICMPv6 header + data payload */ state.snd_buflen = len; /* Size of the ICMPv6 header+data payload */ net_ipv6addr_copy(state.snd_toaddr.s6_addr16, inaddr->sin6_addr.s6_addr16); net_lock(); state.snd_time = clock_systimer(); /* Set up the callback */ state.snd_cb = icmpv6_callback_alloc(dev); if (state.snd_cb) { state.snd_cb->flags = (ICMPv6_POLL | NETDEV_DOWN); state.snd_cb->priv = (FAR void *)&state; state.snd_cb->event = sendto_eventhandler; state.snd_result = -EINTR; /* Assume sem-wait interrupted by signal */ /* Setup to receive ICMPv6 ECHO replies */ if (icmpv6->type == ICMPv6_ECHO_REQUEST) { conn->id = icmpv6->id; conn->nreqs = 1; } conn->dev = dev; /* Notify the device driver of the availability of TX data */ netdev_txnotify_dev(dev); /* Wait for either the send to complete or for timeout to occur. * net_lockedwait will also terminate if a signal is received. */ ninfo("Start time: 0x%08x\n", state.snd_time); net_lockedwait(&state.snd_sem); icmpv6_callback_free(dev, state.snd_cb); } net_unlock(); /* Return the negated error number in the event of a failure, or the * number of bytes sent on success. */ if (state.snd_result < 0) { nerr("ERROR: Return error=%d\n", state.snd_result); ret = state.snd_result; goto errout; } return len; errout: conn->id = 0; conn->nreqs = 0; conn->dev = NULL; iob_free_queue(&conn->readahead); return ret; } #endif /* CONFIG_NET_ICMPv6_SOCKET */