/**************************************************************************** * net/arp/arm_inout.c * Implementation of the ARP Address Resolution Protocol. * * Copyright (C) 2007-2011, 2014 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Based on uIP which also has a BSD style license: * * Author: Adam Dunkels * Copyright (c) 2001-2003, Adam Dunkels. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote * products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /* The Address Resolution Protocol ARP is used for mapping between IP * addresses and link level addresses such as the Ethernet MAC * addresses. ARP uses broadcast queries to ask for the link level * address of a known IP address and the host which is configured with * the IP address for which the query was meant, will respond with its * link level address. * * Note: This ARP implementation only supports Ethernet. */ /**************************************************************************** * Included Files ****************************************************************************/ #include #ifdef CONFIG_NET #include #include #include #include #include #include #include #include #include #include "netdev/netdev.h" #include "route/route.h" #ifdef CONFIG_NET_ARP /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define ARP_REQUEST 1 #define ARP_REPLY 2 #define ARP_HWTYPE_ETH 1 #define RASIZE 4 /* Size of ROUTER ALERT */ #define ETHBUF ((struct eth_hdr_s *)&dev->d_buf[0]) #define ARPBUF ((struct arp_hdr_s *)&dev->d_buf[UIP_LLH_LEN]) #define IPBUF ((struct arp_iphdr_s *)&dev->d_buf[UIP_LLH_LEN]) /**************************************************************************** * Private Types ****************************************************************************/ /* ARP header -- Size 28 bytes */ struct arp_hdr_s { uint16_t ah_hwtype; /* 16-bit Hardware type (Ethernet=0x001) */ uint16_t ah_protocol; /* 16-bit Protocol type (IP=0x0800) */ uint8_t ah_hwlen; /* 8-bit Hardware address size (6) */ uint8_t ah_protolen; /* 8-bit Procotol address size (4) */ uint16_t ah_opcode; /* 16-bit Operation */ uint8_t ah_shwaddr[6]; /* 48-bit Sender hardware address */ uint16_t ah_sipaddr[2]; /* 32-bit Sender IP adress */ uint8_t ah_dhwaddr[6]; /* 48-bit Target hardware address */ uint16_t ah_dipaddr[2]; /* 32-bit Target IP address */ }; /* IP header -- Size 20 or 24 bytes */ struct arp_iphdr_s { uint8_t eh_vhl; /* 8-bit Version (4) and header length (5 or 6) */ uint8_t eh_tos; /* 8-bit Type of service (e.g., 6=TCP) */ uint8_t eh_len[2]; /* 16-bit Total length */ uint8_t eh_ipid[2]; /* 16-bit Identification */ uint8_t eh_ipoffset[2]; /* 16-bit IP flags + fragment offset */ uint8_t eh_ttl; /* 8-bit Time to Live */ uint8_t eh_proto; /* 8-bit Protocol */ uint16_t eh_ipchksum; /* 16-bit Header checksum */ uint16_t eh_srcipaddr[2]; /* 32-bit Source IP address */ uint16_t eh_destipaddr[2]; /* 32-bit Destination IP address */ uint16_t eh_ipoption[2]; /* (optional) */ }; /**************************************************************************** * Private Data ****************************************************************************/ /* Support for broadcast address */ static const struct ether_addr g_broadcast_ethaddr = {{0xff, 0xff, 0xff, 0xff, 0xff, 0xff}}; static const uint16_t g_broadcast_ipaddr[2] = {0xffff, 0xffff}; /* Support for IGMP multicast addresses. * * Well-known ethernet multicast address: * * ADDRESS TYPE USAGE * 01-00-0c-cc-cc-cc 0x0802 CDP (Cisco Discovery Protocol), VTP (Virtual Trunking Protocol) * 01-00-0c-cc-cc-cd 0x0802 Cisco Shared Spanning Tree Protocol Address * 01-80-c2-00-00-00 0x0802 Spanning Tree Protocol (for bridges) IEEE 802.1D * 01-80-c2-00-00-02 0x0809 Ethernet OAM Protocol IEEE 802.3ah * 01-00-5e-xx-xx-xx 0x0800 IPv4 IGMP Multicast Address * 33-33-00-00-00-00 0x86DD IPv6 Neighbor Discovery * 33-33-xx-xx-xx-xx 0x86DD IPv6 Multicast Address (RFC3307) * * The following is the first three octects of the IGMP address: */ #if defined(CONFIG_NET_IGMP) && !defined(CONFIG_NET_IPv6) static const uint8_t g_multicast_ethaddr[3] = {0x01, 0x00, 0x5e}; #endif /**************************************************************************** * Private Functions ****************************************************************************/ #if defined(CONFIG_NET_DUMPARP) && defined(CONFIG_DEBUG) static void arp_dump(struct arp_hdr_s *arp) { nlldbg(" HW type: %04x Protocol: %04x\n", arp->ah_hwtype, arp->ah_protocol);\ nlldbg(" HW len: %02x Proto len: %02x Operation: %04x\n", arp->ah_hwlen, arp->ah_protolen, arp->ah_opcode); nlldbg(" Sender MAC: %02x:%02x:%02x:%02x:%02x:%02x IP: %d.%d.%d.%d\n", arp->ah_shwaddr[0], arp->ah_shwaddr[1], arp->ah_shwaddr[2], arp->ah_shwaddr[3], arp->ah_shwaddr[4], arp->ah_shwaddr[5], arp->ah_sipaddr[0] & 0xff, arp->ah_sipaddr[0] >> 8, arp->ah_sipaddr[1] & 0xff, arp->ah_sipaddr[1] >> 8); nlldbg(" Dest MAC: %02x:%02x:%02x:%02x:%02x:%02x IP: %d.%d.%d.%d\n", arp->ah_dhwaddr[0], arp->ah_dhwaddr[1], arp->ah_dhwaddr[2], arp->ah_dhwaddr[3], arp->ah_dhwaddr[4], arp->ah_dhwaddr[5], arp->ah_dipaddr[0] & 0xff, arp->ah_dipaddr[0] >> 8, arp->ah_dipaddr[1] & 0xff, arp->ah_dipaddr[1] >> 8); } #else # define arp_dump(arp) #endif /**************************************************************************** * Public Functions ****************************************************************************/ /* ARP processing for incoming IP packets * * This function should be called by the device driver when an IP packet has * been received. The function will check if the address is in the ARP cache, * and if so the ARP cache entry will be refreshed. If no ARP cache entry was * found, a new one is created. * * This function expects an IP packet with a prepended Ethernet header in the * d_buf[] buffer, and the length of the packet in the variable d_len. */ #ifdef CONFIG_NET_ARP_IPIN void arp_ipin(struct uip_driver_s *dev) { in_addr_t srcipaddr; /* Only insert/update an entry if the source IP address of the incoming IP * packet comes from a host on the local network. */ srcipaddr = uip_ip4addr_conv(IPBUF->eh_srcipaddr); if (uip_ipaddr_maskcmp(srcipaddr, dev->d_ipaddr, dev->d_netmask)) { arp_update(IPBUF->eh_srcipaddr, ETHBUF->src); } } #endif /* CONFIG_NET_ARP_IPIN */ /* ARP processing for incoming ARP packets. * * This function should be called by the device driver when an ARP * packet has been received. The function will act differently * depending on the ARP packet type: if it is a reply for a request * that we previously sent out, the ARP cache will be filled in with * the values from the ARP reply. If the incoming ARP packet is an ARP * request for our IP address, an ARP reply packet is created and put * into the d_buf[] buffer. * * When the function returns, the value of the field d_len * indicates whether the device driver should send out a packet or * not. If d_len is zero, no packet should be sent. If d_len is * non-zero, it contains the length of the outbound packet that is * present in the d_buf[] buffer. * * This function expects an ARP packet with a prepended Ethernet * header in the d_buf[] buffer, and the length of the packet in the * variable d_len. */ void arp_arpin(struct uip_driver_s *dev) { struct arp_hdr_s *parp = ARPBUF; in_addr_t ipaddr; if (dev->d_len < (sizeof(struct arp_hdr_s) + UIP_LLH_LEN)) { nlldbg("Too small\n"); dev->d_len = 0; return; } dev->d_len = 0; ipaddr = uip_ip4addr_conv(parp->ah_dipaddr); switch(parp->ah_opcode) { case HTONS(ARP_REQUEST): nllvdbg("ARP request for IP %04lx\n", (long)ipaddr); /* ARP request. If it asked for our address, we send out a reply. */ if (uip_ipaddr_cmp(ipaddr, dev->d_ipaddr)) { struct eth_hdr_s *peth = ETHBUF; /* First, we register the one who made the request in our ARP * table, since it is likely that we will do more communication * with this host in the future. */ arp_update(parp->ah_sipaddr, parp->ah_shwaddr); parp->ah_opcode = HTONS(ARP_REPLY); memcpy(parp->ah_dhwaddr, parp->ah_shwaddr, ETHER_ADDR_LEN); memcpy(parp->ah_shwaddr, dev->d_mac.ether_addr_octet, ETHER_ADDR_LEN); memcpy(peth->src, dev->d_mac.ether_addr_octet, ETHER_ADDR_LEN); memcpy(peth->dest, parp->ah_dhwaddr, ETHER_ADDR_LEN); parp->ah_dipaddr[0] = parp->ah_sipaddr[0]; parp->ah_dipaddr[1] = parp->ah_sipaddr[1]; uiphdr_ipaddr_copy(parp->ah_sipaddr, &dev->d_ipaddr); arp_dump(parp); peth->type = HTONS(UIP_ETHTYPE_ARP); dev->d_len = sizeof(struct arp_hdr_s) + UIP_LLH_LEN; } break; case HTONS(ARP_REPLY): nllvdbg("ARP reply for IP %04lx\n", (long)ipaddr); /* ARP reply. We insert or update the ARP table if it was meant * for us. */ if (uip_ipaddr_cmp(ipaddr, dev->d_ipaddr)) { arp_update(parp->ah_sipaddr, parp->ah_shwaddr); } break; } } /* Prepend Ethernet header to an outbound IP packet and see if we need * to send out an ARP request. * * This function should be called before sending out an IP packet. The * function checks the destination IP address of the IP packet to see * what Ethernet MAC address that should be used as a destination MAC * address on the Ethernet. * * If the destination IP address is in the local network (determined * by logical ANDing of netmask and our IP address), the function * checks the ARP cache to see if an entry for the destination IP * address is found. If so, an Ethernet header is prepended and the * function returns. If no ARP cache entry is found for the * destination IP address, the packet in the d_buf[] is replaced by * an ARP request packet for the IP address. The IP packet is dropped * and it is assumed that they higher level protocols (e.g., TCP) * eventually will retransmit the dropped packet. * * If the destination IP address is not on the local network, the IP * address of the default router is used instead. * * When the function returns, a packet is present in the d_buf[] * buffer, and the length of the packet is in the field d_len. */ void arp_out(struct uip_driver_s *dev) { const struct arp_entry *tabptr = NULL; struct arp_hdr_s *parp = ARPBUF; struct eth_hdr_s *peth = ETHBUF; struct arp_iphdr_s *pip = IPBUF; in_addr_t ipaddr; in_addr_t destipaddr; #ifdef CONFIG_NET_PKT /* Skip sending ARP requests when the frame to be transmitted was * written into a packet socket. */ if ((dev->d_flags & IFF_NOARP) == IFF_NOARP) { return; } #endif /* Find the destination IP address in the ARP table and construct * the Ethernet header. If the destination IP address isn't on the * local network, we use the default router's IP address instead. * * If not ARP table entry is found, we overwrite the original IP * packet with an ARP request for the IP address. */ /* First check if destination is a local broadcast. */ if (uiphdr_ipaddr_cmp(pip->eh_destipaddr, g_broadcast_ipaddr)) { memcpy(peth->dest, g_broadcast_ethaddr.ether_addr_octet, ETHER_ADDR_LEN); } #if defined(CONFIG_NET_IGMP) && !defined(CONFIG_NET_IPv6) /* Check if the destination address is a multicast address * * - IPv4: multicast addresses lie in the class D group -- The address range * 224.0.0.0 to 239.255.255.255 (224.0.0.0/4) * * - IPv6 multicast addresses are have the high-order octet of the * addresses=0xff (ff00::/8.) */ else if (NTOHS(pip->eh_destipaddr[0]) >= 0xe000 && NTOHS(pip->eh_destipaddr[0]) <= 0xefff) { /* Build the well-known IPv4 IGMP Ethernet address. The first * three bytes are fixed; the final three variable come from the * last three bytes of the IP address. */ const uint8_t *ip = ((uint8_t*)pip->eh_destipaddr) + 1; memcpy(peth->dest, g_multicast_ethaddr, 3); memcpy(&peth->dest[3], ip, 3); } #endif else { /* Check if the destination address is on the local network. */ destipaddr = uip_ip4addr_conv(pip->eh_destipaddr); if (!uip_ipaddr_maskcmp(destipaddr, dev->d_ipaddr, dev->d_netmask)) { /* Destination address is not on the local network */ #ifdef CONFIG_NET_ROUTE /* We have a routing table.. find the correct router to use in * this case (or, as a fall-back, use the device's default router * address). We will use the router IP address instead of the * destination address when determining the MAC address. */ netdev_router(dev, destipaddr, &ipaddr); #else /* Use the device's default router IP address instead of the * destination address when determining the MAC address. */ uip_ipaddr_copy(ipaddr, dev->d_draddr); #endif } else { /* Else, we use the destination IP address. */ uip_ipaddr_copy(ipaddr, destipaddr); } /* Check if we already have this destination address in the ARP table */ tabptr = arp_find(ipaddr); if (!tabptr) { nllvdbg("ARP request for IP %04lx\n", (long)ipaddr); /* The destination address was not in our ARP table, so we * overwrite the IP packet with an ARP request. */ memset(peth->dest, 0xff, ETHER_ADDR_LEN); memset(parp->ah_dhwaddr, 0x00, ETHER_ADDR_LEN); memcpy(peth->src, dev->d_mac.ether_addr_octet, ETHER_ADDR_LEN); memcpy(parp->ah_shwaddr, dev->d_mac.ether_addr_octet, ETHER_ADDR_LEN); uiphdr_ipaddr_copy(parp->ah_dipaddr, &ipaddr); uiphdr_ipaddr_copy(parp->ah_sipaddr, &dev->d_ipaddr); parp->ah_opcode = HTONS(ARP_REQUEST); parp->ah_hwtype = HTONS(ARP_HWTYPE_ETH); parp->ah_protocol = HTONS(UIP_ETHTYPE_IP); parp->ah_hwlen = ETHER_ADDR_LEN; parp->ah_protolen = 4; arp_dump(parp); peth->type = HTONS(UIP_ETHTYPE_ARP); dev->d_len = sizeof(struct arp_hdr_s) + UIP_LLH_LEN; return; } /* Build an Ethernet header. */ memcpy(peth->dest, tabptr->at_ethaddr.ether_addr_octet, ETHER_ADDR_LEN); } /* Finish populating the Ethernet header */ memcpy(peth->src, dev->d_mac.ether_addr_octet, ETHER_ADDR_LEN); peth->type = HTONS(UIP_ETHTYPE_IP); dev->d_len += UIP_LLH_LEN; } #endif /* CONFIG_NET_ARP */ #endif /* CONFIG_NET */