/**************************************************************************** * boards/arm/tiva/tm4c1294-launchpad/include/board.h * * Copyright (C) 2015 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __BOARDS_ARM_TIVA_TM4C1294_LAUNCHPAD_INCLUDE_BOARD_H #define __BOARDS_ARM_TIVA_TM4C1294_LAUNCHPAD_INCLUDE_BOARD_H /**************************************************************************** * Included Files ****************************************************************************/ #ifndef __ASSEMBLY__ # include #endif /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Clocking *****************************************************************/ /* Crystals on-board the EK-TM4C1294XL include: * * 1. 25.0MHz (Y2) is connected to OSC0/1 pins and is used as the run mode * input to the PLL. * 2. 32.768kHz (Y3) connected to XOSC0/1 and clocks the hibernation module. */ #define SYSCON_RCC_XTAL SYSCON_RCC_XTAL16000KHZ /* On-board crystal is 25 MHz */ #define XTAL_FREQUENCY 25000000 /* Frequencies of other clock sources */ #define PIOSC_FREQUENCY 16000000 /* Precision internal oscillator */ #define RTCOSC_FREQUENCY 32768 /* Hibernation module RTC oscillator */ #define LFIOSC_FREQUENCY 33000 /* Low frequency internal oscillator */ /* The PLL generates Fvco according to the following formulae. * The input clock to the PLL may be either the external crystal (Fxtal) * or PIOSC (Fpiosc). * This logic supports only the external crystal as the PLL source clock. * * Fin = Fxtal / (Q + 1 )(N + 1) -OR- Fpiosc / (Q + 1)(N + 1) * Mdiv = Mint + (MFrac / 1024) * Fvco = Fin * Mdiv * * Where the register fields Q and N actually hold (Q-1) and (N-1). * The following setup then generates Fvco = 480MHz: * * Fin = 25 MHz / 1 / 5 = 5 MHz * Mdiv = 96 * Fvco = 480 */ #define BOARD_PLL_MINT 96 /* Integer part of PLL M value */ #define BOARD_PLL_MFRAC 0 /* Fractional part of PLL M value */ #define BOARD_PLL_N 5 /* PLL N value */ #define BOARD_PLL_Q 1 /* PLL Q value */ #define BOARD_FVCO_FREQUENCY 480000000 /* Resulting Fvco */ /* When the PLL is active, the system clock frequency (SysClk) is calculated * using the following equation: * * SysClk = Fvco/ (sysdiv + 1) * * The following setup generates Sysclk = 120MHz: */ #define BOARD_PLL_SYSDIV 4 /* Sysclk = Fvco / 4 = 120MHz */ #define SYSCLK_FREQUENCY 120000000 /* Resulting SysClk frequency */ /* Peripheral Clock (PCLK) * * Same frequency as the SYSCLK */ #define PCLK_FREQUENCY SYSCLK_FREQUENCY /* Alternate Clock (ALTCLK) * * The ALTCLK provides a clock source of numerous frequencies to the * general-purpose timer, SSI, and UART modules. * The default source for the ALTCLK is the Precision * Internal Oscillator (PIOSC). * The Hibernation Real-time Clock (RTCOSC) and Low * Frequency Internal Oscillator (LFIOSC) are alternatives. * If the RTCOSC Output is selected, the clock source must also be enabled * in the Hibernation module. */ #define BOARD_ALTCLKCFG SYSCON_ALTCLKCFG_ALTCLK_PIOSC #define ALTCLK_FREQUENCY PIOSC_FREQUENCY /* LED definitions **********************************************************/ /* The EK-TM4C1294XL has 5 green LEDs. * LED D0 is lit when 3.3V power supply is available . * LEDs D1 and D2 are general purpose LEDs. * LEDs D3 and D4 can be used for Ethernet link and activity. * * --- ------------ * Pin Pin Function * --- ------------ * PN1 green LED D1 * PN0 green LED D2 * PF4 green LED D3 * PF0 green LED D4 * --- ------------ */ /* LED index values for use with board_userled() */ #define BOARD_LED_D1 0 #define BOARD_LED_D2 1 #define BOARD_LED_D3 2 #define BOARD_LED_D4 3 #define BOARD_NLEDS 4 /* LED bits for use with board_userled_all() */ #define BOARD_LED_D1_BIT (1 << BOARD_LED_D1) #define BOARD_LED_D2_BIT (1 << BOARD_LED_D2) #define BOARD_LED_D3_BIT (1 << BOARD_LED_D3) #define BOARD_LED_D4_BIT (1 << BOARD_LED_D4) /* If CONFIG_ARCH_LEDS is defined, * then automated support for the EK-TM4C1294XL LED * will be included in the build: * LED1 LED2 LED3 LED4 */ #define LED_STARTED 1 /* ON OFF NC NC */ #define LED_HEAPALLOCATE 0 /* NC NC NC NC */ #define LED_IRQSENABLED 0 /* NC NC NC NC */ #define LED_STACKCREATED 2 /* ON ON NC NC */ #define LED_INIRQ 0 /* NC NC NC NC */ #define LED_SIGNAL 0 /* NC NC NC NC */ #define LED_ASSERTION 0 /* NC NC NC NC */ #define LED_PANIC 3 /* OFF ON NC NC (flashing 2Hz) */ /* Button definitions *******************************************************/ /* There are four push buttons on the board. * Two of them are user controllable. * The others are RESET and WAKE * * --- ------------ * Pin Pin Function * --- ------------ * PJ0 USR_SW1 * PJ1 USR_SW2 * --- ------------ */ #define BUTTON_SW1 0 #define BUTTON_SW2 1 #define NUM_BUTTONS 2 #define BUTTON_SW1_BIT (1 << BUTTON_SW1) #define BUTTON_SW2_BIT (1 << BUTTON_SW2) /* Pin Multiplexing Disambiguation ******************************************/ /* Ethernet LEDs * * PF0/PF4/PF1 are used for Ethernet LEDs. * PF0/EN0LED0/LED4 Ethernet link OK * PF4/EN0LED1/LED3 Ethernet TX/RX activity * PF1/EN0LED2 Ethernet 100-base TX */ #define GPIO_EN0_LED0 GPIO_EN0_LED0_1 #define GPIO_EN0_LED1 GPIO_EN0_LED1_1 #define GPIO_EN0_LED2 GPIO_EN0_LED2_1 /* Control pins for BOOST-CC2564MODA plugged into BoosterPack1 * * --- ------------ * Pin Pin Function * --- ------------ * PM3 NSHUTD * PG0 RTS * PL4 CTS * --- ------------ */ #define UART7_GPIO_NSHUTD (GPIO_FUNC_OUTPUT | GPIO_PORTM | GPIO_PIN_3) #define UART7_GPIO_RTS (GPIO_FUNC_OUTPUT | GPIO_PORTG | GPIO_PIN_0) #define UART7_GPIO_CTS (GPIO_FUNC_INPUT | GPIO_PORTL | GPIO_PIN_4) #endif /* __BOARDS_ARM_TIVA_TM4C1294_LAUNCHPAD_INCLUDE_BOARD_H */