/******************************************************************************** * include/signal.h * * Copyright (C) 2007-2009, 2011, 2013-2015 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ********************************************************************************/ #ifndef __INCLUDE_SIGNAL_H #define __INCLUDE_SIGNAL_H /******************************************************************************** * Included Files ********************************************************************************/ #include #include #include #include #ifdef CONFIG_SIG_EVTHREAD # include /* Needed for pthread_attr_t */ #endif /******************************************************************************** * Pre-processor Definitions ********************************************************************************/ /* Signal set management definitions and macros. */ #define NULL_SIGNAL_SET ((sigset_t)0x00000000) #define ALL_SIGNAL_SET ((sigset_t)0xffffffff) #define MIN_SIGNO 0 #define MAX_SIGNO 31 #define GOOD_SIGNO(s) ((((unsigned)(s))<=MAX_SIGNO)) #define SIGNO2SET(s) ((sigset_t)1 << (s)) /* All signals are "real time" signals */ #define SIGRTMIN MIN_SIGNO /* First real time signal */ #define SIGRTMAX MAX_SIGNO /* Last real time signal */ /* A few of the real time signals are used within the OS. They have * default values that can be overridden from the configuration file. The * rest are all user signals. * * The signal number zero is wasted for the most part. It is a valid * signal number, but has special meaning at many interfaces (e.g., Kill()). * * These are the semi-standard signal definitions: */ #ifndef CONFIG_SIG_SIGUSR1 # define SIGUSR1 1 /* User signal 1 */ #else # define SIGUSR1 CONFIG_SIG_SIGUSR1 #endif #ifndef CONFIG_SIG_SIGUSR2 # define SIGUSR2 2 /* User signal 2 */ #else # define SIGUSR2 CONFIG_SIG_SIGUSR2 #endif #ifndef CONFIG_SIG_SIGALARM # define SIGALRM 3 /* Default signal used with POSIX timers (used only */ /* no other signal is provided) */ #else # define SIGALRM CONFIG_SIG_SIGALARM #endif #ifdef CONFIG_SCHED_HAVE_PARENT # ifndef CONFIG_SIG_SIGCHLD # define SIGCHLD 4 /* Used by child threads to signal parent thread */ # else # define SIGCHLD CONFIG_SIG_SIGCHLD # endif #endif #ifdef CONFIG_FS_AIO # ifndef CONFIG_SIG_POLL # define SIGPOLL 5 /* Sent when an asynchronous I/O event occurs */ # else # define SIGPOLL CONFIG_SIG_POLL # endif #endif /* The following are non-standard signal definitions */ #ifndef CONFIG_DISABLE_PTHREAD # ifndef CONFIG_SIG_SIGCONDTIMEDOUT # define SIGCONDTIMEDOUT 16 /* Used in the implementation of pthread_cond_timedwait */ # else # define SIGCONDTIMEDOUT CONFIG_SIG_SIGCONDTIMEDOUT # endif #endif /* SIGWORK is used to wake up various internal, NuttX worker thread */ #if defined(CONFIG_SCHED_WORKQUEUE) || defined(CONFIG_PAGING) # ifndef CONFIG_SIG_SIGWORK # define SIGWORK 17 /* Used to wake up the work queue */ # else # define SIGWORK CONFIG_SIG_SIGWORK # endif #endif /* sigprocmask() "how" definitions. Only one of the following can be specified: */ #define SIG_BLOCK 1 /* Block the given signals */ #define SIG_UNBLOCK 2 /* Unblock the given signals */ #define SIG_SETMASK 3 /* Set the signal mask to the current set */ /* struct sigaction flag values */ #define SA_NOCLDSTOP (1 << 0) /* Do not generate SIGCHILD when * children stop (ignored) */ #define SA_SIGINFO (1 << 1) /* Invoke the signal-catching function * with 3 args instead of 1 * (always assumed) */ #define SA_NOCLDWAIT (1 << 2) /* If signo=SIGCHLD, exit status of child * processes will be discarded */ /* These are the possible values of the signfo si_code field */ #define SI_USER 0 /* Signal sent from kill, raise, or abort */ #define SI_QUEUE 1 /* Signal sent from sigqueue */ #define SI_TIMER 2 /* Signal is result of timer expiration */ #define SI_ASYNCIO 3 /* Signal is the result of asynch IO completion */ #define SI_MESGQ 4 /* Signal generated by arrival of a message on an */ /* empty message queue */ #define CLD_EXITED 5 /* Child has exited (SIGCHLD only) */ #define CLD_KILLED 6 /* Child was killed (SIGCHLD only) */ #define CLD_DUMPED 7 /* Child terminated abnormally (SIGCHLD only) */ #define CLD_TRAPPED 8 /* Traced child has trapped (SIGCHLD only) */ #define CLD_STOPPED 9 /* Child has stopped (SIGCHLD only) */ #define CLD_CONTINUED 10 /* Stopped child had continued (SIGCHLD only) */ /* Values for the sigev_notify field of struct sigevent */ #define SIGEV_NONE 0 /* No asynchronous notification is delivered */ #define SIGEV_SIGNAL 1 /* Notify via signal,with an application-defined value */ #ifdef CONFIG_SIG_EVTHREAD # define SIGEV_THREAD 3 /* A notification function is called */ #endif /* Special values of of sa_handler used by sigaction and sigset. They are all * treated like NULL for now. This is okay for SIG_DFL and SIG_IGN because * in NuttX, the default action for all signals is to ignore them. * * REVISIT: Need to distinguish the value of SIG_HOLD. It is needed in the * implementation of sigset() but would need to be recognized in all signal * functions that deal with signal disposition. */ #define SIG_ERR ((CODE void*)-1) #define SIG_DFL ((CODE void*)0) #define SIG_IGN ((CODE void*)0) #if 0 /* Not yet supported */ # define SIG_HOLD ((CODE void*)0) #endif /******************************************************************************** * Public Type Definitions ********************************************************************************/ /* This defines a set of 32 signals (numbered 0 through 31). */ typedef uint32_t sigset_t; /* Bit set of 32 signals */ #define __SIGSET_T_DEFINED 1 /* This defines the type of the siginfo si_value field */ union sigval { int sival_int; /* Integer value */ FAR void *sival_ptr; /* Pointer value */ }; /* This structure contains elements that define a queue signal. The following is * used to attach a signal to a message queue to notify a task when a message is * available on a queue */ struct sigevent { uint8_t sigev_notify; /* Notification method: SIGEV_SIGNAL, SIGEV_NONE, or SIGEV_THREAD */ uint8_t sigev_signo; /* Notification signal */ union sigval sigev_value; /* Data passed with notification */ #ifdef CONFIG_SIG_EVTHREAD CODE void (*sigev_notify_function)(union sigval); /* Notification function */ FAR pthread_attr_t *sigev_notify_attributes; /* Notification attributes (not used) */ #endif }; /* The following types is used to pass parameters to/from signal handlers */ struct siginfo { uint8_t si_signo; /* Identifies signal */ uint8_t si_code; /* Source: SI_USER, SI_QUEUE, SI_TIMER, SI_ASYNCIO, or SI_MESGQ */ uint8_t si_errno; /* Zero or errno value associated with signal */ union sigval si_value; /* Data passed with signal */ #ifdef CONFIG_SCHED_HAVE_PARENT pid_t si_pid; /* Sending task ID */ int si_status; /* Exit value or signal (SIGCHLD only). */ #endif }; typedef struct siginfo siginfo_t; #define __SIGINFO_T_DEFINED 1 /* Non-standard convenience definition of signal handling function types. * These should be used only internally within the NuttX signal logic. */ typedef CODE void (*_sa_handler_t)(int); typedef CODE void (*_sa_sigaction_t)(int, FAR siginfo_t *, FAR void *); /* The following structure defines the action to take for given signal */ struct sigaction { union { _sa_handler_t _sa_handler; _sa_sigaction_t _sa_sigaction; } sa_u; sigset_t sa_mask; int sa_flags; }; /* Definitions that adjust the non-standard naming */ #define sa_handler sa_u._sa_handler #define sa_sigaction sa_u._sa_sigaction /******************************************************************************** * Public Data ********************************************************************************/ /******************************************************************************** * Public Function Prototypes ********************************************************************************/ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif int kill(pid_t, int); int sigemptyset(FAR sigset_t *set); int sigfillset(FAR sigset_t *set); int sigaddset(FAR sigset_t *set, int signo); int sigdelset(FAR sigset_t *set, int signo); int sigismember(FAR const sigset_t *set, int signo); int sigaction(int sig, FAR const struct sigaction *act, FAR struct sigaction *oact); void (*sigset(int signo, void (*disp)(int)))(int); int sigignore(int signo); int sigprocmask(int how, FAR const sigset_t *set, FAR sigset_t *oset); int sigpause(int signo); int sigrelse(int signo); int sigpending(FAR sigset_t *set); int sighold(int signo); int sigsuspend(FAR const sigset_t *sigmask); int sigwaitinfo(FAR const sigset_t *set, FAR struct siginfo *value); int sigtimedwait(FAR const sigset_t *set, FAR struct siginfo *value, FAR const struct timespec *timeout); #ifdef CONFIG_CAN_PASS_STRUCTS int sigqueue(int pid, int signo, union sigval value); #else int sigqueue(int pid, int signo, FAR void *sival_ptr); #endif #undef EXTERN #ifdef __cplusplus } #endif #else /* __INCLUDE_SIGNAL_H */ #include /* Avoid a circular dependencies by assuring that simple type definitions * are avaiable in any inclusion ordering. */ #ifndef __SIGSET_T_DEFINED typedef uint32_t sigset_t; # define __SIGSET_T_DEFINED 1 #endif #ifndef __SIGINFO_T_DEFINED struct siginfo; typedef struct siginfo siginfo_t; # define __SIGINFO_T_DEFINED 1 #endif #endif /* __INCLUDE_SIGNAL_H */