/**************************************************************************** * fs/smartfs/smartfs.h * * Copyright (C) 2013-2014 Ken Pettit. All rights reserved. * Author: Ken Pettit * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __FS_SMARTFS_SMARTFS_H #define __FS_SMARTFS_SMARTFS_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* SMART Definitions ********************************************************/ /* General SMART organization. The following example assumes 4 logical * sectors per FLASH erase block. The actual relationship is determined by * the FLASH geometry reported by the MTD driver. * * ERASE LOGICAL Sectors begin with a sector header. * Sectors may be marked as "released," * BLOCK SECTOR CONTENTS pending garbage collection * n 4*n --+---------------+ * Hdr |LLLLLLLLLLLLLLL| Logical sector number (2 bytes) * |QQQQQQQQQQQQQQQ| Sequence number (2 bytes) * |SSSSSSSSSSSSSSS| Status bits (1 byte) * +---------------+ * |TTTTTTTTTTTTTTT| Sector Type (dir or file) (1 byte) * |NNNNNNNNNNNNNNN| Number of next logical sector in chain * |UUUUUUUUUUUUUUU| Number of bytes used in this sector * | | * | (Sector Data) | * | | * 4*n+1 --+---------------+ * Sector Hdr |LLLLLLLLLLLLLLL| Logical sector number (2 bytes) * |QQQQQQQQQQQQQQQ| Sequence number (2 bytes) * |SSSSSSSSSSSSSSS| Status bits (1 byte) * +---------------+ * FS Hdr |TTTTTTTTTTTTTTT| Sector Type (dir or file) (1 byte) * |NNNNNNNNNNNNNNN| Number of next logical sector in chain * |UUUUUUUUUUUUUUU| Number of bytes used in this sector * | | * | (Sector Data) | * | | * 4*n+2 --+---------------+ * Sector Hdr |LLLLLLLLLLLLLLL| Logical sector number (2 bytes) * |QQQQQQQQQQQQQQQ| Sequence number (2 bytes) * |SSSSSSSSSSSSSSS| Status bits (1 byte) * +---------------+ * FS Hdr |TTTTTTTTTTTTTTT| Sector Type (dir or file) (1 byte) * |NNNNNNNNNNNNNNN| Number of next logical sector in chain * |UUUUUUUUUUUUUUU| Number of bytes used in this sector * | | * | (Sector Data) | * | | * 4*n+3 --+---------------+ * Sector Hdr |LLLLLLLLLLLLLLL| Logical sector number (2 bytes) * |QQQQQQQQQQQQQQQ| Sequence number (2 bytes) * |SSSSSSSSSSSSSSS| Status bits (1 byte) * +---------------+ * FS Hdr |TTTTTTTTTTTTTTT| Sector Type (dir or file) (1 byte) * |NNNNNNNNNNNNNNN| Number of next logical sector in chain * |UUUUUUUUUUUUUUU| Number of bytes used in this sector * | | * | (Sector Data) | * | | * n+1 4*(n+1) --+---------------+ * Sector Hdr |LLLLLLLLLLLLLLL| Logical sector number (2 bytes) * |QQQQQQQQQQQQQQQ| Sequence number (2 bytes) * |SSSSSSSSSSSSSSS| Status bits (1 byte) * +---------------+ * FS Hdr |TTTTTTTTTTTTTTT| Sector Type (dir or file) (1 byte) * |NNNNNNNNNNNNNNN| Number of next logical sector in chain * |UUUUUUUUUUUUUUU| Number of bytes used in this sector * | | * | | * | | * --+---------------+ * * General operation: * Physical sectors are allocated and assigned a logical sector number * and a starting sequence number of zero. * * SECTOR HEADER: * The sector header (first 5 bytes) tracks the state of each sector and * is used by the SMART MTD block driver. At the block level, there is * no notion of sector chaining, only allocated sectors within erase * blocks. * * FILE SYSTEM (FS) HEADER: * The file system header (next 5 bytes) tracks file and directory entries * and chains. * * SMART Limitations: * 1. SMART currently depends on the underlying MTD block driver supporting * single-byte programming operation. This is due to the method it * uses for marking a sector as "released", committed, etc. * 2. Garbage collection can occur when a new sector is allocated or when * existing sector data is overwritten with new data. Thus, occasionally, * file writing may take longer than other times. * 3. The implementation currently does not track bad blocks on the device. * 4. There is no true wear-leveling implemented yet, though provesion have * been made to reserve logical sectors to allow it to be added using * a "sector aging" tracking mechanism. */ /* Values for SMART inode state. * * SMART_STATE_FILE - The inode is a valid usable, file * INODE_STATE_DELETED - The inode has been deleted. * Other values - The inode is bad and has an invalid state. * * Care is taken so that the VALID to DELETED transition only involves * burning bits from the erased to non-erased state. */ #define INODE_STATE_FILE (CONFIG_NXFFS_ERASEDSTATE ^ 0x22) #define INODE_STATE_DELETED (CONFIG_NXFFS_ERASEDSTATE ^ 0xaa) /* Directory entry flag definitions */ #define SMARTFS_DIRENT_EMPTY 0x8000 /* Set to non-erase state when entry used */ #define SMARTFS_DIRENT_ACTIVE 0x4000 /* Set to erase state when entry is active */ #define SMARTFS_DIRENT_TYPE 0x2000 /* Indicates the type of entry (file/dir) */ #define SMARTFS_DIRENT_DELETING 0x1000 /* Directory entry is being deleted */ #define SMARTFS_DIRENT_RESERVED 0x0E00 /* Reserved bits */ #define SMARTFS_DIRENT_MODE 0x01FF /* Mode the file was created with */ #define SMARTFS_DIRENT_TYPE_DIR 0x2000 #define SMARTFS_DIRENT_TYPE_FILE 0x0000 /* Number of bytes in the SMART magic sequences */ #define SMART_MAGICSIZE 4 /* Quasi-standard definitions */ #ifndef MIN # define MIN(a,b) (a < b ? a : b) #endif #ifndef MAX # define MAX(a,b) (a > b ? a : b) #endif /* Underlying MTD Block driver access functions */ #define FS_BOPS(f) (f)->fs_blkdriver->u.i_bops #define FS_IOCTL(f,c,a) (FS_BOPS(f)->ioctl ? FS_BOPS(f)->ioctl((f)->fs_blkdriver,c,a) : (-ENOSYS)) /* The logical sector number of the root directory. */ #define SMARTFS_ROOT_DIR_SECTOR 3 /* Defines the sector types */ #define SMARTFS_SECTOR_TYPE_DIR 1 #define SMARTFS_SECTOR_TYPE_FILE 2 #ifndef CONFIG_SMARTFS_DIRDEPTH # define CONFIG_SMARTFS_DIRDEPTH 8 #endif /* Buffer flags (when CRC enabled) */ #define SMARTFS_BFLAG_DIRTY 0x01 /* Set if data changed in the sector */ #define SMARTFS_BFLAG_NEWALLOC 0x02 /* Set if sector not written since alloc */ #define SMARTFS_ERASEDSTATE_16BIT (uint16_t) ((CONFIG_SMARTFS_ERASEDSTATE << 8) | \ CONFIG_SMARTFS_ERASEDSTATE) /* Size of temporary buffer used when a file is zero extended by ftruncate() * logic. */ #define SMARTFS_TRUNCBUFFER_SIZE 512 #ifndef offsetof # define offsetof(type, member) ((size_t) & (((type *)0)->member)) #endif #define SMARTFS_NEXTSECTOR(h) (*((uint16_t *)h->nextsector)) #define SMARTFS_USED(h) (*((uint16_t *)h->used)) #ifdef CONFIG_MTD_SMART_ENABLE_CRC #define CONFIG_SMARTFS_USE_SECTOR_BUFFER #endif /**************************************************************************** * Public Types ****************************************************************************/ /* This structure defines each packed block on the FLASH media */ /* This is an in-memory representation of the SMART inode as extracted from * FLASH and with additional state information. */ struct smartfs_entry_s { uint16_t firstsector; /* Sector number of the name */ uint16_t dsector; /* Sector number of the directory entry */ uint16_t doffset; /* Offset of the directory entry */ uint16_t dfirst; /* 1st sector number of the directory entry */ uint16_t flags; /* Flags, including mode */ FAR char *name; /* inode name */ uint32_t utc; /* Time stamp */ uint32_t datlen; /* Length of inode data */ }; /* This is an on-device representation of the SMART inode as it exists on * the FLASH. */ struct smartfs_entry_header_s { uint16_t flags; /* Flags, including permissions: * 15: Empty entry * 14: Active entry * 12-0: Permissions bits */ int16_t firstsector; /* Sector number of the name */ uint32_t utc; /* Time stamp */ char name[0]; /* inode name */ }; /* This structure describes the smartfs header at the start of each * sector. It manages the sector chain and used bytes in the sector. */ #if defined(CONFIG_MTD_SMART_ENABLE_CRC) && defined(CONFIG_SMART_CRC_32) struct smartfs_chain_header_s { uint8_t nextsector[4]; /* Next logical sector in the chain */ uint8_t used[4]; /* Number of bytes used in this sector */ uint8_t type; /* Type of sector entry (file or dir) */ }; #elif defined(CONFIG_MTD_SMART_ENABLE_CRC) && defined(CONFIG_SMART_CRC_16) struct smartfs_chain_header_s { uint8_t type; /* Type of sector entry (file or dir) */ uint8_t nextsector[2]; /* Next logical sector in the chain */ uint8_t used[2]; /* Number of bytes used in this sector */ }; #else struct smartfs_chain_header_s { uint8_t type; /* Type of sector entry (file or dir) */ uint8_t nextsector[2]; /* Next logical sector in the chain */ uint8_t used[2]; /* Number of bytes used in this sector */ }; #endif /* This structure describes the state of one open file. This structure * is protected by the volume semaphore. */ struct smartfs_ofile_s { struct smartfs_ofile_s *fnext; /* Supports a singly linked list */ #ifdef CONFIG_SMARTFS_USE_SECTOR_BUFFER uint8_t *buffer; /* Sector buffer to reduce writes */ uint8_t bflags; /* Buffer flags */ #endif int16_t crefs; /* Reference count */ mode_t oflags; /* Open mode */ struct smartfs_entry_s entry; /* Describes the SMARTFS inode entry */ size_t filepos; /* Current file position */ uint16_t currsector; /* Current sector of filepos */ uint16_t curroffset; /* Current offset in sector */ uint16_t byteswritten; /* Count of bytes written to currsector * that have not been recorded in the * sector yet. We delay updating the * used field until the file is closed, * a seek, or more data is written that * causes the sector to change. */ }; /* This structure represents the overall mountpoint state. An instance of * this structure is retained as inode private data on each mountpoint that * is mounted with a smartfs filesystem. */ struct smartfs_mountpt_s { #if defined(CONFIG_SMARTFS_MULTI_ROOT_DIRS) || defined(CONFIG_FS_PROCFS) struct smartfs_mountpt_s *fs_next; /* Pointer to next SMART filesystem */ #endif FAR struct inode *fs_blkdriver; /* Our underlying block device */ sem_t *fs_sem; /* Used to assure thread-safe access */ FAR struct smartfs_ofile_s *fs_head; /* A singly-linked list of open files */ bool fs_mounted; /* true: The file system is ready */ struct smart_format_s fs_llformat; /* Low level device format info */ char *fs_rwbuffer; /* Read/Write working buffer */ char *fs_workbuffer; /* Working buffer */ uint8_t fs_rootsector; /* Root directory sector num */ }; /**************************************************************************** * Public Data ****************************************************************************/ /**************************************************************************** * Public Functions Prototypes ****************************************************************************/ /* Semaphore access for internal use */ int smartfs_semtake(struct smartfs_mountpt_s *fs); void smartfs_semgive(struct smartfs_mountpt_s *fs); /* Forward references for utility functions */ struct smartfs_mountpt_s; /* Utility functions */ int smartfs_mount(FAR struct smartfs_mountpt_s *fs, bool writeable); int smartfs_unmount(FAR struct smartfs_mountpt_s *fs); int smartfs_finddirentry(FAR struct smartfs_mountpt_s *fs, FAR struct smartfs_entry_s *direntry, FAR const char *relpath, FAR uint16_t *parentdirsector, FAR const char **filename); int smartfs_createentry(FAR struct smartfs_mountpt_s *fs, uint16_t parentdirsector, FAR const char *filename, uint16_t type, mode_t mode, FAR struct smartfs_entry_s *direntry, uint16_t sectorno, FAR struct smartfs_ofile_s *sf); int smartfs_deleteentry(FAR struct smartfs_mountpt_s *fs, FAR struct smartfs_entry_s *entry); int smartfs_countdirentries(FAR struct smartfs_mountpt_s *fs, FAR struct smartfs_entry_s *entry); int smartfs_sync_internal(FAR struct smartfs_mountpt_s *fs, FAR struct smartfs_ofile_s *sf); off_t smartfs_seek_internal(FAR struct smartfs_mountpt_s *fs, FAR struct smartfs_ofile_s *sf, off_t offset, int whence); int smartfs_shrinkfile(FAR struct smartfs_mountpt_s *fs, FAR struct smartfs_ofile_s *sf, off_t length); int smartfs_extendfile(FAR struct smartfs_mountpt_s *fs, FAR struct smartfs_ofile_s *sf, off_t length); uint16_t smartfs_rdle16(FAR const void *val); void smartfs_wrle16(void *dest, uint16_t val); uint32_t smartfs_rdle32(FAR const void *val); void smartfs_wrle32(uint8_t *dest, uint32_t val); #if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS) struct smartfs_mountpt_s *smartfs_get_first_mount(void); #endif #if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS) struct smartfs_mountpt_s *smartfs_get_first_mount(void); #endif struct file; /* Forward references */ struct inode; struct fs_dirent_s; struct statfs; struct stat; #endif /* __FS_SMARTFS_SMARTFS_H */