# # For a description of the syntax of this configuration file, # see the file kconfig-language.txt in the NuttX tools repository. # choice prompt "Select target board" default ARCH_BOARD_CUSTOM ---help--- Select the board hosting the architecture. You must first select the exact MCU part number, then the boards supporting that part will be available for selection. Use ARCH_BOARD_CUSTOM to create a new board configuration. config ARCH_BOARD_AMBER bool "Amber Web Server" depends on ARCH_CHIP_ATMEGA128 ---help--- This is placeholder for the SoC Robotics Amber Web Server that is based on the Atmel AVR ATMega128 MCU. There is not much there yet and what is there is untested due to tool-related issues. config ARCH_BOARD_ARDUINO_MEGA2560 bool "Arduino Mega 2560" depends on ARCH_CHIP_ATMEGA2560 ---help--- This option selects the Arduino Mega 2560 board featuring the Atmel Atmega2560 MCU running at 16 MHz. config ARCH_BOARD_ARDUINO_DUE bool "Arduino Due" depends on ARCH_CHIP_ATSAM3X8E select ARCH_HAVE_LEDS ---help--- This options selects the Arduino DUE board featuring the Atmel ATSAM3X8E MCU running at 84 MHz. config ARCH_BOARD_ARDUINO_M0 bool "Arduino M0" depends on ARCH_CHIP_SAMD21G18A select ARCH_HAVE_LEDS ---help--- This options selects the Arduino M0 board featuring the Atmel ATSAMD21 MCU. config ARCH_BOARD_AVR32DEV1 bool "Atmel AVR32DEV1 board" depends on ARCH_CHIP_AT32UC3B0256 select ARCH_HAVE_LEDS # select ARCH_HAVE_BUTTONS # select ARCH_HAVE_IRQBUTTONS ---help--- This is a port of NuttX to the Atmel AVR32DEV1 board. That board is based on the Atmel AT32UC3B0256 MCU and uses a specially patched version of the GNU toolchain: The patches provide support for the AVR32 family. That patched GNU toolchain is available only from the Atmel website. STATUS: This port is functional but very basic. There are configurations for NSH and the OS test. config ARCH_BOARD_AXOLOTI bool "Axoloti board" depends on ARCH_CHIP_STM32F427I select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Axoloti synthesizer board based on the STMicro STM32F427IGH6 MCU. See: http://www.axoloti.com/ config ARCH_BOARD_C5471EVM bool "Spectrum Digital C5471 evaluation board" depends on ARCH_CHIP_C5471 select ARCH_HAVE_LEDS ---help--- This is a port to the Spectrum Digital C5471 evaluation board. The TMS320C5471 is a dual core processor from TI with an ARM7TDMI general purpose processor and a c54 DSP. It is also known as TMS320DA180 or just DA180. NuttX runs on the ARM core and is built with a GNU arm-nuttx-elf toolchain*. This port is complete and verified. config ARCH_BOARD_CLICKER2_STM32 bool "Mikroe Clicker2 STM32" depends on ARCH_CHIP_STM32F407VG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Mikroe Clicker2 STM32 board based on the STMicro STM32F407VGT6 MCU. config ARCH_BOARD_CLOUDCTRL bool "Darcy's CloudController stm32f10x board" depends on ARCH_CHIP_STM32F107VC select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Small network relay development board. Based on the Shenzhou IV development board design. config ARCH_BOARD_DEMOS92S12NEC64 bool "NXP/FreeScale DMO9S12NE64 board" depends on ARCH_CHIP_MCS92S12NEC64 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- NXP/FreeScale DMO9S12NE64 board based on the MC9S12NE64 hcs12 cpu. This port uses the m9s12x GCC toolchain. STATUS: (Still) under development; it is code complete but has not yet been verified. config ARCH_BOARD_DK_TM4C129X bool "Tiva DK-TM4C129x Connected Development Kit" depends on ARCH_CHIP_TM4C129XNCZAD select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Tiva DK-TM4C129x Connected Development Kit featuring the TM4C129XNCZAD MCU. config ARCH_BOARD_EA3131 bool "Embedded Artists EA3131 Development board" depends on ARCH_CHIP_LPC3131 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- Embedded Artists EA3131 Development board. This board is based on the an NXP LPC3131 MCU. This OS is built with the arm-nuttx-elf toolchain*. STATUS: This port is complete and mature. config ARCH_BOARD_EA3152 bool "Embedded Artists EA3152 Development board" depends on ARCH_CHIP_LPC3152 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- Embedded Artists EA3152 Development board. This board is based on the an NXP LPC3152 MCU. This OS is built with the arm-nuttx-elf toolchain*. STATUS: This port is has not be exercised well, but since it is a simple derivative of the ea3131, it should be fully functional. config ARCH_BOARD_EAGLE100 bool "Micromint Eagle-100 Development board" depends on ARCH_CHIP_LM3S6918 select ARCH_HAVE_LEDS ---help--- Micromint Eagle-100 Development board. This board is based on the an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the arm-nuttx-elf toolchain*. STATUS: This port is complete and mature. config ARCH_BOARD_EFM32G8XXSTK bool "EFM32 Gecko Starter Kit" depends on ARCH_CHIP_EFM32G890F128 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- This option selects the EFM32 Gecko Starter Kit (EFM32-G8XX-STK). config ARCH_BOARD_EFM32GG_STK3700 bool "EFM32 Giant Gecko Starter Kit" depends on ARCH_CHIP_EFM32GG990F1024 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- This option selects the EFM32 Giant Gecko Starter Kit (EFM32GG-STK3700). config ARCH_BOARD_EKKLM3S9B96 bool "TI/Stellaris EKK-LM3S9B96" depends on ARCH_CHIP_LM3S9B96 select ARCH_HAVE_LEDS ---help--- TI/Stellaris EKK-LM3S9B96 board. This board is based on the an EKK-LM3S9B96 which is a Cortex-M3. config ARCH_BOARD_ESP32CORE bool "Expressif ESP32 Core board V2" depends on ARCH_CHIP_ESP32 ---help--- The ESP32 is a dual-core system from Expressif with two Harvard architecture Xtensa LX6 CPUs. All embedded memory, external memory and peripherals are located on the data bus and/or the instruction bus of these CPUs. With some minor exceptions, the address mapping of two CPUs is symmetric, meaning they use the same addresses to access the same memory. config ARCH_BOARD_EZ80F910200KITG bool "ZiLOG ez80f910200kitg development kit" depends on ARCH_CHIP_EZ80F91 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- ez80Acclaim! Microcontroller. This port use the Zilog ez80f910200kitg development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line tools. The development environment is Cygwin under WinXP. config ARCH_BOARD_EZ80F910200ZCO bool "ZiLOG ez80f910200zco development kit" depends on ARCH_CHIP_EZ80F91 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- ez80Acclaim! Microcontroller. This port use the Zilog ez80f910200zco development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line tools. The development environment is Cygwin under WinXP. config ARCH_BOARD_FIRE_STM32 bool "M3 Wildfire STM32 board" depends on ARCH_CHIP_STM32F103VE select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Support for the M3 Wildfire STM32 board. This board is based on the STM32F103VET6 chip. See http://firestm32.taobao.com . Version 2 and 3 of the boards are supported but only version 2 has been tested. config ARCH_BOARD_FLIPNCLICK_PIC32MZ bool "Mikroe Flip&Click PIC32MZ" depends on ARCH_CHIP_PIC32MZ2048EFH select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This options selects the Mikroe Flip&Click PIC32MZ board. This board is an chipKit Arduino-compatible board (but can also be used with the Mikroe bootloader). It has with four Mikroe Click bus interfaces in addition to standard Arduino connectors. This board features the Microchip PIC32MZ2048EFH100 MCU running at 200 MHz (252Mhz capable). config ARCH_BOARD_FLIPNCLICK_SAM3X bool "Mikroe Flip&Click SAM3X" depends on ARCH_CHIP_ATSAM3X8E select ARCH_HAVE_LEDS ---help--- This options selects the Mikroe Flip&Click STM32X board. This board is an Arduino-Due work-alike with four Mikroe Click bus interfaces. Like the Arduino DUE, this board features the Atmel ATSAM3X8E MCU running at 84 MHz. config ARCH_BOARD_FREEDOM_K28F bool "NXP Freedom-k28f development board" depends on ARCH_CHIP_MK28FN2M0VMI15 select ARCH_HAVE_LEDS if !RGBLED select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS select KINETIS_SDHC_PULLUP if KINETIS_SDHC # REVISIT ---help--- development board. This port uses the NXP/FreeScale FREEDOM-K28F development board. This board uses the Kinetis K28F MK28FN2M0VMI15 Cortex-M4 MCU. config ARCH_BOARD_FREEDOM_K64F bool "NXP Freedom-k64f development board" depends on ARCH_CHIP_MK64FN1M0VLL12 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS select KINETIS_SDHC_PULLUP if KINETIS_SDHC ---help--- development board. This port uses the NXP/FreeScale FREEDOM-K64F development board. This board uses the Kinetis K64 MK64FN1M0VLL12 Cortex-M4 MCU. config ARCH_BOARD_FREEDOM_K66F bool "NXP Freedom-k66f development board" depends on ARCH_CHIP_MK66FN2M0VMD18 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS select KINETIS_SDHC_PULLUP if KINETIS_SDHC ---help--- development board. This port uses the NXP/FreeScale FREEDOM-K66F development board. This board uses the Kinetis K66 MK66FN2M0VMD18 Cortex-M4 MCU. config ARCH_BOARD_FREEDOM_KL25Z bool "NXP/FreeScale Freedom KL25Z" depends on ARCH_CHIP_MKL25Z128 select ARCH_HAVE_LEDS ---help--- This is the configuration for the NXP/FreeScale Freedom KL25Z board. This board has the K25Z120LE3AN chip with a built-in SDA debugger. config ARCH_BOARD_FREEDOM_KL26Z bool "NXP/FreeScale Freedom KL26Z" depends on ARCH_CHIP_MKL26Z128 select ARCH_HAVE_LEDS ---help--- This is the configuration for the NXP/FreeScale Freedom KL26Z board. This board has the K26Z128VLH4 chip with a built-in SDA debugger. config ARCH_BOARD_GAPUINO bool "GWT gapuino board" depends on ARCH_CHIP_GAP8 select UART_SERIALDRIVER ---help--- Nuttx port for gapuino, a GAP8 evaluation board. config ARCH_BOARD_HIFIVE1_REVB bool "HiFive1 Rev B board" depends on ARCH_CHIP_FE310 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is the board configuration for the port of NuttX to the SiFive HiFive1 Rev B board. This board features the RISC-V FE310-G002 config ARCH_BOARD_HYMINI_STM32V bool "HY-Mini STM32v board" depends on ARCH_CHIP_STM32F103VC select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- A configuration for the HY-Mini STM32v board. This board is based on the STM32F103VCT6 chip. config ARCH_BOARD_IMXRT1020_EVK bool "NXP i.MX RT 1020 EVK" depends on ARCH_CHIP_MIMXRT1021DAG5A select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is the board configuration for the port of NuttX to the NXP i.MXRT evaluation kit, MIMXRT1020-EVKB. This board features the MIMXRT1021DAG5A MCU. config ARCH_BOARD_IMXRT1050_EVK bool "NXP i.MX RT 1050 EVK" depends on ARCH_CHIP_MIMXRT1052DVL6A select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is the board configuration for the port of NuttX to the NXP i.MXRT evaluation kit, MIMXRT1050-EVKB. This board features the MIMXRT1052DVL6A MCU. config ARCH_BOARD_IMXRT1060_EVK bool "NXP i.MX RT 1060 EVK" depends on ARCH_CHIP_MIMXRT1062DVL6A select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is the board configuration for the port of NuttX to the NXP i.MXRT evaluation kit, MIMXRT1060-EVK. This board features the MIMXRT1062DVL6A MCU. config ARCH_BOARD_LC823450_XGEVK bool "ON Semiconductor LC823450-XGEVK development board" depends on ARCH_CHIP_LC823450 select ARCH_HAVE_LEDS ---help--- This port uses the ON Semiconductor LC823450-XGEVK development board. config ARCH_BOARD_LINCOLN60 bool "Micromint Lincoln 60 board" depends on ARCH_CHIP_LPC1769 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Micromint Lincoln 60 board using the NXP LPC1769 MCU. config ARCH_BOARD_KWIKSTIK_K40 bool "NXP/FreeScale KwikStik-K40 development board" depends on ARCH_CHIP_MK40X256VLQ100 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Kinetis K40 Cortex-M4 MCU. This port uses the NXP/FreeScale KwikStik-K40 development board. config ARCH_BOARD_LAUNCHXL_CC1310 bool "TI LaunchXL-CC1310" depends on ARCH_CHIP_CC1310 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- TI SimpleLink CC1310 LaunchPad Evaluation Kit (LAUNCHXL-CC1310) featuring the SimpleLinkCC1310 chip. This board features the CC1310F128 part with 128Kb of FLASH and 20Kb of SRAM. config ARCH_BOARD_LAUNCHXL_CC1312R1 bool "TI LaunchXL-CC1312R1" depends on ARCH_CHIP_CC1312R1 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- TI SimpleLink CC1312R1 LaunchPad Evaluation Kit (LAUNCHXL-CC1312R1) featuring the SimpleLinkCC1312R1 chip. config ARCH_BOARD_LAUNCHXL_TMS57004 bool "TI LaunchXL-TMS57004" depends on ARCH_CHIP_TMS570LS0432PZ select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- TI Hercules TMS570LS04x/03x LaunchPad Evaluation Kit (LAUNCHXL- TMS57004) featuring the Hercules TMS570LS0432PZ chip. config ARCH_BOARD_LM3S6432S2E bool "Stellaris RDK-S2E Reference Design Kit" depends on ARCH_CHIP_LM3S6432 select ARCH_HAVE_LEDS ---help--- Stellaris RDK-S2E Reference Design Kit and the MDL-S2E Ethernet to Serial module. config ARCH_BOARD_LM3S6965EK bool "Stellaris LM3S6965 Evaluation Kit" depends on ARCH_CHIP_LM3S6965 select ARCH_HAVE_LEDS ---help--- Stellaris LM3S6965 Evaluation Kit. This board is based on the an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the arm-nuttx-elf toolchain*. STATUS: This port is complete and mature. config ARCH_BOARD_LM3S8962EK bool "Stellaris LMS38962 Evaluation Kit" depends on ARCH_CHIP_LM3S8962 select ARCH_HAVE_LEDS ---help--- Stellaris LMS38962 Evaluation Kit. config ARCH_BOARD_LM4F120_LAUNCHPAD bool "Stellaris LM4F120 LaunchPad" depends on ARCH_CHIP_LM4F120 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Stellaris LM4F120 LaunchPad. config ARCH_BOARD_LPCXPRESSO bool "NXP LPCExpresso LPC1768" depends on ARCH_CHIP_LPC1768 select ARCH_HAVE_LEDS ---help--- Embedded Artists base board with NXP LPCExpresso LPC1768. This board is based on the NXP LPC1768. The Code Red toolchain is used by default. config ARCH_BOARD_LPCXPRESSO_LPC54628 bool "NXP LPCXpresso LPC54628" depends on ARCH_CHIP_LPC54628 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- LPCXpresso LPC54626 board featuring the NXP LPC54628 MCU. config ARCH_BOARD_BAMBINO_200E bool "Micromint Bambino 200E" depends on ARCH_CHIP_LPC4330FBD144 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Micromint Bambino board. This board is based on the LPC4330FBD144. config ARCH_BOARD_LPC1766STK bool "Olimex LPC1766-STK board" depends on ARCH_CHIP_LPC1766 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This port uses the Olimex LPC1766-STK board and a GNU GCC toolchain* under Linux or Cygwin. STATUS: Complete and mature. config ARCH_BOARD_LPC4088_DEVKIT bool "LPC4088 Developer's Kit" depends on ARCH_CHIP_LPC4088 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Embedded Artists LPC4088 Developer's Kit. See https://www.embeddedartists.com/products/lpc4088-developers-kit/ for further information. This board uses the NXP LPC4088FET208 MCU. config ARCH_BOARD_LPC4088_QUICKSTART bool "LPC4088 QuickStart Board" depends on ARCH_CHIP_LPC4088 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Embedded Artists LPC4088 QuickStart Board. See https://www.embeddedartists.com/products/lpc4088-quickstart-board/ for further information. This board uses the NXP LPC4088FET208 MCU. config ARCH_BOARD_LPC4330_XPLORER bool "NXG LPC4330-Xplorer" depends on ARCH_CHIP_LPC4330FET100 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- NXG Technologies LPC4330 Xplorer board. This board is based on the LPC4330FET100. The Code Red toolchain is used by default. config ARCH_BOARD_LPC4337_WS bool "WaveShare LPC4337-WS" depends on ARCH_CHIP_LPC4337JBD144 ---help--- The WaveShare LPC4337-ws board featuring the NXP LPC4337JBD144 MCU. config ARCH_BOARD_LPC4357_EVB bool "NXP LPC4357-EVB" depends on ARCH_CHIP_LPC4357FET256 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- NXP Technologies LPC4357 EVB board. This board is based on the LPC4357FET256. config ARCH_BOARD_LPC4370_LINK2 bool "NXP LPC4370-Link2" depends on ARCH_CHIP_LPC4370FET100 select ARCH_HAVE_LEDS ---help--- NXP LPC4370 Link2 board. This board is based on the LPC4370FET100. The Code Red toolchain is used by default. config ARCH_BOARD_LX_CPU bool "PiKRON LX_CPU" depends on ARCH_CHIP_LPC1788 || ARCH_CHIP_LPC4088 select ARCH_HAVE_LEDS ---help--- This port uses the PiKRON LX_CPU board. See the http://pikron.com/pages/products/cpu_boards/lx_cpu.html for further information. This board features the NXP LPC4088 (compatible with LPC1788) and Xilinx Spartan 6 XC6SLX9 config ARCH_BOARD_MAIX_BIT bool "Sipeed Maix Bit board" depends on ARCH_CHIP_K210 ---help--- This is the board configuration for the port of NuttX to the Sipeed Maix Bit board. This board features the RISC-V K210 config ARCH_BOARD_MAX32660_EVSYS bool "Maxim Integrated MAX32660-EVSYS" depends on ARCH_CHIP_MAX32660 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This option enables support the Maxim Integrated MAX32660-EVSYS board. config ARCH_BOARD_MAKERLISP bool "MakerLisp" depends on ARCH_CHIP_EZ80F91 select ARCH_HAVE_LEDS ---help--- ez80Acclaim! Microcontroller. This port use the MakerLips machine based on an eZ80F091 part, and the Zilog ZDS-II Windows command line tools. The development environment is Cygwin under Windows. A Windows native development environment is available but has not been verified. config ARCH_BOARD_MAPLE bool "maple board" depends on ARCH_CHIP_STM32F103RB || ARCH_CHIP_STM32F103CB select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- A configuration for the LeafLab's Maple and Maple Mini boards. These boards are based on the STM32F103RBT6 chip for the standard version and on the STM32F103CBT6 for the mini version (See http://leaflabs.com/docs/hardware/maple.html) config ARCH_BOARD_MBED bool "mbed LCP1768" depends on ARCH_CHIP_LPC1768 select ARCH_HAVE_LEDS ---help--- This option enables support the mbed board (http://mbed.org) that features the NXP LPC1768 microcontroller. This OS is also built with the arm-nuttx-elf toolchain*. STATUS: Contributed. config ARCH_BOARD_MCB1700 bool "Keil MCB1700" depends on ARCH_CHIP_LPC1768 select ARCH_HAVE_LEDS ---help--- The configurations in this directory support the Keil MCB1700. config ARCH_BOARD_MCU123_LPC214X bool "mcu123.com LPC2148 Development Board" depends on ARCH_CHIP_LPC214X select ARCH_HAVE_LEDS ---help--- This port is for the NXP LPC2148 as provided on the mcu123.com lpc214x development board. This OS is also built with the arm-nuttx-elf toolchain*. The port supports serial, timer0, spi, and usb. config ARCH_BOARD_METRO_M4 bool "Adafruit M4 Metro" depends on ARCH_CHIP_SAMD51J19 select ARCH_HAVE_LEDS ---help--- ---help--- This configuration is the port of NuttX to the Adafruit Metro M4. The Metro M4 uses a Arduino form factor and and pinout. It's powered with an ATSAMD51J19 config ARCH_BOARD_MIRTOO bool "Mirtoo PIC32 Module from Dimitech" depends on ARCH_CHIP_PIC32MX250F128D select ARCH_HAVE_LEDS ---help--- This is the port to the DTX1-4000L "Mirtoo" module. This module uses MicroChip PIC32MX250F128D. See http://www.dimitech.com/ for further information. config ARCH_BOARD_MICROPENDOUS3 bool "Opendous Micropendous 3 board" depends on ARCH_CHIP_AT90USB646 || ARCH_CHIP_AT90USB647 || ARCH_CHIP_AT90USB1286 || ARCH_CHIP_AT90USB1287 ---help--- This is a port to the Opendous Micropendous 3 board. This board may be populated with either an AVR AT90USB646, 647, 1286, or 1287 MCU. Support is configured for the AT90USB647. config ARCH_BOARD_MISOC_QEMU bool "Qemu LM32 demo" depends on ARCH_CHIP_LM32 ---help--- This configuration is port to NuttX running on a Qemu LM32 system. You can find the Qemu setup at https://bitbucket.org/key2/qemu config ARCH_BOARD_MISOC_VERILATOR bool "Verilator Misoc demo" depends on ARCH_CHIP_LM32 || ARCH_CHIP_MINERVA ---help--- This configuration is port to NuttX running on Verilator. config ARCH_BOARD_MOTEINO_MEGA bool "LowPowerLab MoteinoMEGA" depends on ARCH_CHIP_ATMEGA1284P select ARCH_HAVE_LEDS ---help--- This is placeholder for the LowPowerLab MoteinoMEGA that is based on the Atmel AVR ATMega1284P MCU. There is not much there yet and what is there is untested due to tool-related issues. config ARCH_BOARD_MOXA bool "Moxa board" depends on ARCH_CHIP_MOXART ---help--- Moxa config ARCH_BOARD_NE64BADGE bool "FEG NE64 /PoE Badge board" depends on ARCH_CHIP_MCS92S12NEC64 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- Future Electronics Group NE64 /PoE Badge board based on the MC9S12NE64 hcs12 cpu. This port uses the m9s12x GCC toolchain. STATUS: Under development. The port is code-complete but has not yet been fully tested. config ARCH_BOARD_NTOSD_DM320 bool "Neuros OSD v1.0 Dev Board" depends on ARCH_CHIP_DM320 select ARCH_HAVE_LEDS ---help--- This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-nuttx-elf toolchain*: see http://wiki.neurostechnology.com/index.php/OSD_1.0_Developer_Home There are some differences between the Dev Board and the currently available commercial v1.0 Boards. See http://wiki.neurostechnology.com/index.php/OSD_Developer_Board_v1 NuttX operates on the ARM9EJS of this dual core processor. STATUS: This port is code complete, verified, and included in the NuttX 0.2.1 release. config ARCH_BOARD_NRF52832_DK bool "Nordic nRF52832 Development Kit (PCA10040)" depends on ARCH_CHIP_NRF52 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- This option selects the Nordic nRF52832 Development Kit (PCA10040) config ARCH_BOARD_NRF52_FEATHER bool "Adafruit NRF52 Feather board" depends on ARCH_CHIP_NRF52 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- This option selects the Adafruit nRF52832 Feather board config ARCH_BOARD_NRF52840_DK bool "Nordic nRF52840 Development Kit (PCA10056)" depends on ARCH_CHIP_NRF52 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- This option selects the Nordic nRF52840 Development Kit (PCA10056) config ARCH_BOARD_NRF52840_DONGLE bool "Nordic nRF52840 Dongle (PCA10059)" depends on ARCH_CHIP_NRF52 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- This option selects the Nordic nRF52840 Dongle (PCA10059) config ARCH_BOARD_NUTINY_NUC120 bool "Nuvoton NuTiny NUC120" depends on ARCH_CHIP_NUC120LE3AN select ARCH_HAVE_LEDS ---help--- This is the port to the Nuvoton NuTiny EVB 120 board. This board uses a Nuvoton NUC120 chip, specifically the NUC120LE3AN. See http://www.nuvoton.com/ for further information. config ARCH_BOARD_OLIMEX_EFM32G880F128_STK bool "Olimex EFM32G880F128 STK" depends on ARCH_CHIP_EFM32G880F128 select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This options selects the Olimex EFM32G880F128 STK config ARCH_BOARD_OLIMEXLPC2378 bool "Olimex-lpc2378 board" depends on ARCH_CHIP_LPC2378 select ARCH_HAVE_LEDS ---help--- This port uses the Olimex-lpc2378 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. STATUS: ostest and NSH configurations available. This port for the NXP LPC2378 was contributed by Rommel Marcelo. config ARCH_BOARD_OLIMEX_LPC_H3131 bool "Olimex LPC-H3131 Development board" depends on ARCH_CHIP_LPC3131 select ARCH_HAVE_LEDS ---help--- Olimex LPC-H3131 development board. This board is based on the NXP LPC3131 MCU. config ARCH_BOARD_OLIMEX_STRP711 bool "Olimex STR-P711 board" depends on ARCH_CHIP_STR71X select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- This port uses the Olimex STR-P711 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. See the http://www.olimex.com/dev/str-p711.html" for further information. STATUS: Configurations for the basic OS test and NSH are complete and verified. config ARCH_BOARD_OLIMEX_STM32H405 bool "Olimex STM32 H405 board" depends on ARCH_CHIP_STM32F405RG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This port uses the Olimex STM32 H405 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. See the http://www.olimex.com for further information. This board features the STMicro STM32F405RGT6 MCU. config ARCH_BOARD_OLIMEX_STM32H407 bool "Olimex STM32 H407 board" depends on ARCH_CHIP_STM32F407ZG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This port uses the Olimex STM32 H407 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. See the http://www.olimex.com for further information. This board features the STMicro STM32F407ZGT6 (144pins). config ARCH_BOARD_OLIMEX_STM32E407 bool "Olimex STM32 E407 board" depends on ARCH_CHIP_STM32F407ZG || ARCH_CHIP_STM32F407ZE select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Olimex STM32 E407 board based on the STMicro STM32F407ZGT6 (144pins) or STM32F407ZE on newer boards. config ARCH_BOARD_OLIMEX_STM32P107 bool "Olimex STM32 P107 board" depends on ARCH_CHIP_STM32F107VC ---help--- This port uses the Olimex STM32 P107 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. See the http://www.olimex.com for further information. This board features the STMicro STM32F107VC MCU config ARCH_BOARD_OLIMEX_STM32P207 bool "Olimex STM32 P207 board" depends on ARCH_CHIP_STM32F207ZE select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This port uses the Olimex STM32 P207 board and a GNU arm-nuttx-elf toolchain under Linux or Cygwin. See the http://www.olimex.com for further information. This board features the STMicro STM32F207ZE MCU config ARCH_BOARD_OLIMEX_STM32P407 bool "Olimex STM32 P407 board" depends on ARCH_CHIP_STM32F407ZG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This port uses the Olimex STM32 P407 board and a GNU arm-nuttx-elf toolchain under Linux or Cygwin. See the http://www.olimex.com for further information. This board features the STMicro STM32F407ZG MCU config ARCH_BOARD_OLIMEXINO_STM32 bool "Olimexino STM32 board" depends on ARCH_CHIP_STM32F103RB select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This port uses the Olimexino STM32 board and a GNU arm-nuttx-elf toolchain under Linux or Cygwin. See the http://www.olimex.com for further information. This board features the STMicro STM32F103RBT6 MCU. Contributed by David Sidrane. config ARCH_BOARD_OPEN1788 bool "Wave Share Open1788" depends on ARCH_CHIP_LPC1788 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This port uses the Wave Share Open1788 board. See the http://wvshare.com/product/Open1788-Standard.htm for further information. This board features the NXP LPC1788 MCU config ARCH_BOARD_OR1K bool "OpenRISC generic board" depends on ARCH_CHIP_MOR1KX select ARCH_HAVE_LEDS ---help--- Generic OpenRISC board. config ARCH_BOARD_P112 bool "P112 Z180-based platform" depends on ARCH_CHIP_Z8018216FSG ---help--- The P112 is notable because it was the first of the hobbyist single board computers to reach the production stage. The P112 hobbyist computers were relatively widespread and inspired other hobbyist centered home brew computing projects such as N8VEM home brew computing project. The P112 project still maintains many devoted enthusiasts and has an online repository of software and other information. The P112 computer originated as a commercial product of "D-X Designs Pty Ltd" of Australia. They describe the computer as "The P112 is a stand-alone 8-bit CPU board. Typically running CP/M (tm) or a similar operating system, it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial, parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor. Powered solely from 5V, it draws 150mA (nominal: not including disk drives) with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible." The P112 board was last available new in 1996 by Dave Brooks. In late 2004 on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112 boards was discussed. David Griffith decided to produce additional P112 kits with Dave Brooks blessing and the assistance of others. In addition Terry Gulczynski makes additional P112 derivative hobbyist home brew computers. Hal Bower was very active in the mid 1990's on the P112 project and ported the "Banked/Portable BIOS". config ARCH_BOARD_PCDUINO_A10 bool "pcDuino A10" depends on ARCH_CHIP_A10 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is the port of NuttX to the Allwinner A10-based pcDuino v1 board. See http://www.pcduino.com/ for information about pcDuino Lite, v1, and v2. I have not compared these boards in detail, but I believe that the differences are cosmetic. This port was developed on the v1 board, but the others may be compatible. config ARCH_BOARD_BEAGLEBONE_BLACK bool "beaglebone black" depends on ARCH_CHIP_AM335X select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is the port of NuttX to the TI Beaglebone Black board. config ARCH_BOARD_PIC32MX_STARTERKIT bool "Microchip PIC32MX Ethernet Starter Kit (DM320004)" depends on ARCH_CHIP_PIC32MX795F512L select ARCH_HAVE_LEDS ---help--- This is the port of NuttX to the Microchip PIC32 Ethernet Starter Kit (DM320004) with the Multimedia Expansion Board (MEB, DM320005). See www.microchip.com for further information. config ARCH_BOARD_PIC32MX7MMB bool "Mikroelektronika PIC32MX7 MMB" depends on ARCH_CHIP_PIC32MX795F512L select ARCH_HAVE_LEDS ---help--- This is the port NuttX to the Mikroelektronika PIC32MX7 Multimedia Board (MMB). See http://www.mikroe.com/ for further information. config ARCH_BOARD_PIC32MZ_STARTERKIT bool "Microchip PIC32MZ Ethernet Starter Kit ((DM320006)" depends on ARCH_CHIP_PIC32MZ2048ECH || ARCH_CHIP_PIC32MZ2048ECM select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS if PIC32MZ_GPIOIRQ_PORTB ---help--- This is the port of NuttX to the Microchip PIC32MZ Embedded Connectivity (EC) Starter Kit. There are two configurations of the starter kit: 1) The PIC32MZ Embedded Connectivity Starter Kit based on the PIC32MZ2048ECH144-I/PH chip (DM320006), and 2) The PIC32MZ Embedded Connectivity Starter Kit based on the PIC32MZ2048ECM144-I/PH w/Crypto Engine (DM320006-C) See www.microchip.com for further information. config ARCH_BOARD_NR5M100_NEXYS4 bool "NEXT RISC-V NR5M100 on Nexys-4 board" depends on ARCH_CHIP_NR5M100 select UART_SERIALDRIVER ---help--- This is the port NuttX to the NEXT RISC-V processor runnining on a Digilent Nexys-4 (non DDR version) FPGA board. config ARCH_BOARD_NUCLEO_144 bool "STMicro NUCLEO-144" depends on ARCH_CHIP_STM32F722ZE || ARCH_CHIP_STM32F746ZG || ARCH_CHIP_STM32F767ZI select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo-144 development board featuring STMicroelectronics F2, F3, F4, F7 and L4 MCU families. The board is a "Hardware pattern" that can be populated with the 144 pin package of the following MCUs: Target STM32 Order code STM32F207ZGT6 NUCLEO-F207ZG STM32F303ZET6 NUCLEO-F303ZE STM32F429ZIT6 NUCLEO-F429ZI STM32F446ZET6 NUCLEO-F446ZE STM32F722ZET6 NUCLEO-F722ZE STM32F746ZGT6 NUCLEO-F746ZG STM32F767ZIT6 NUCLEO-F767ZI STM32L496ZGT6 NUCLEO-L496ZG STM32L496ZGT6P NUCLEO-L496ZG-P Supported in this configuration are: NUCLEO-F722ZE - STM32F722ZET6 a 216MHz Cortex-M7, w/FPU - 512KiB Flash memory and 256KiB SRAM. NUCLEO-F746ZG - STM32F746ZGT6 a 216MHz Cortex-M7, w/FPU - 1024KiB Flash memory and 320KiB SRAM. NUCLEO-F767ZI - STM32F767ZIT6 a 216MHz Cortex-M7, w/DPFPU - 2048KiB Flash memory and 512KiB SRAM. config ARCH_BOARD_NUCLEO_L073RZ bool "STM32L073RZU6 Nucleo L073RZ" depends on ARCH_CHIP_STM32L073RZ select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo L073RZ board based on the STMicro STM32L073RZU6 MCU. config ARCH_BOARD_NUCLEO_L496ZG bool "STM32L496 Nucleo L496ZG" depends on ARCH_CHIP_STM32L496ZG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo-144 development board featuring STMicroelectronics F2, F3, F4, F7 and L4 MCU families. The board is a "Hardware pattern" that can be populated with the 144 pin package of the following MCUs: Target STM32 Order code STM32F207ZGT6 NUCLEO-F207ZG STM32F303ZET6 NUCLEO-F303ZE STM32F429ZIT6 NUCLEO-F429ZI STM32F446ZET6 NUCLEO-F446ZE STM32F746ZGT6 NUCLEO-F746ZG STM32F767ZIT6 NUCLEO-F767ZI STM32L496ZGT6 NUCLEO-L496ZG STM32L496ZGT6P NUCLEO-L496ZG-P Supported in this configuration are: NUCLEO-L496ZG - STM32L496ZGT6 a 80MHz Cortex-M4, w/FPU - 1024KiB Flash memory and 320KiB SRAM. config ARCH_BOARD_NUCLEO_F072RB bool "STM32F072 Nucleo F072RB" depends on ARCH_CHIP_STM32F072RB select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo F072RB board based on the STMicro STM32F072RBT6 MCU. config ARCH_BOARD_NUCLEO_F091RC bool "STM32F091 Nucleo F091RC" depends on ARCH_CHIP_STM32F091RC select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo F091RC board based on the STMicro STM32F091RCT6 MCU. config ARCH_BOARD_NUCLEO_F103RB bool "STM32F103 Nucleo F103RB" depends on ARCH_CHIP_STM32F103RB select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo F103RB board based on the STMicro STM32F103RBT6 MCU. config ARCH_BOARD_NUCLEO_F207ZG bool "STM32F207 Nucleo F207ZG" depends on ARCH_CHIP_STM32F207ZG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo F207ZG board based on the STMicro STM32F207ZGT6 MCU. config ARCH_BOARD_NUCLEO_F302R8 bool "STM32F303 Nucleo F302R8" depends on ARCH_CHIP_STM32F302R8 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo F302R8 board based on the STMicro STM32F302R8T6 MCU. config ARCH_BOARD_NUCLEO_F303RE bool "STM32F303 Nucleo F303RE" depends on ARCH_CHIP_STM32F303RE select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo F303RE board based on the STMicro STM32F303RET6 MCU. config ARCH_BOARD_NUCLEO_F303ZE bool "STM32F303 Nucleo F303ZE" depends on ARCH_CHIP_STM32F303ZE select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo F303ZE board based on the STMicro STM32F303ZET6 MCU. config ARCH_BOARD_NUCLEO_F334R8 bool "STM32F334 Nucleo F334R8" depends on ARCH_CHIP_STM32F334R8 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo F334R8 board based on the STMicro STM32F334R8 MCU. config ARCH_BOARD_NUCLEO_F401RE bool "STM32F401 Nucleo F401RE" depends on ARCH_CHIP_STM32F401RE select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is a minimal configuration that supports low-level test of the Nucleo F401RE in the NuttX source tree. config ARCH_BOARD_NUCLEO_F410RB bool "STM32F410 Nucleo F410RB" depends on ARCH_CHIP_STM32F410RB select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is a minimal configuration that supports low-level test of the Nucleo F410RB in the NuttX source tree. config ARCH_BOARD_NUCLEO_F411RE bool "STM32F411 Nucleo F411RE" depends on ARCH_CHIP_STM32F411RE select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is a minimal configuration that supports low-level test of the Nucleo F411RE in the NuttX source tree. config ARCH_BOARD_NUCLEO_F446RE bool "STM32F446 Nucleo F446RE" depends on ARCH_CHIP_STM32F446R select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is a minimal configuration that supports low-level test of the Nucleo F446RE in the NuttX source tree. config ARCH_BOARD_NUCLEO_G070RB bool "STM32G070 Nucleo G070RB" depends on ARCH_CHIP_STM32G070RB select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is a minimal configuration that supports low-level test of the Nucleo G070RB in the NuttX source tree. config ARCH_BOARD_NUCLEO_G071RB bool "STM32G071 Nucleo G071RB" depends on ARCH_CHIP_STM32G071RB select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is a minimal configuration that supports low-level test of the Nucleo G071RB in the NuttX source tree. config ARCH_BOARD_NUCLEO_H743ZI bool "STM32H743 Nucleo H743ZI" depends on ARCH_CHIP_STM32H743ZI select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS # TODO: select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo H743ZI board based on the STMicro STM32H743ZI MCU. config ARCH_BOARD_NUCLEO_L152RE bool "STM32L152 Nucleo L152RE" depends on ARCH_CHIP_STM32L152RE select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo L152RE board based on the STMicro STM32L152REU6 MCU. config ARCH_BOARD_NUCLEO_L432KC bool "STM32L432 Nucleo-32 L432KC" depends on ARCH_CHIP_STM32L432KC select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo-32 L432KC board based on the STMicro STM32L432KCU6 MCU. config ARCH_BOARD_NUCLEO_L452RE bool "STM32L452 Nucleo L452RE" depends on ARCH_CHIP_STM32L452RE select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo L452RE board based on the STMicro STM32L452RET6 MCU. config ARCH_BOARD_NUCLEO_L476RG bool "STM32L476 Nucleo L476RG" depends on ARCH_CHIP_STM32L476RG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro Nucleo L476RG board based on the STMicro STM32L476RGT6 MCU. config ARCH_BOARD_QEMU_I486 bool "Qemu i486 Mode" depends on ARCH_X86 || ARCH_I486 ---help--- Port of NuttX to QEMU in i486 mode. This port will also run on real i486 hardwared (Google the Bifferboard). config ARCH_BOARD_RX65N bool "RX65N renesas board" depends on ARCH_CHIP_R5F565NEDDFC select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- This is a port of the renesas RX65N on the Renesas RX65N board. STATUS: Work has just began on this port. config ARCH_BOARD_RX65N_RSK1MB bool "RX65N on RSKRX65N-1MB renesas board" depends on ARCH_CHIP_R5F565NEDDFC select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- This is a port of the renesas RX65N on the Renesas RX65N board. STATUS: Work has just began on this port. config ARCH_BOARD_RX65N_RSK2MB bool "RX65N on RSKRX65N-2MB renesas board" depends on ARCH_CHIP_R5F565NEHDFC select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- This is a port of the renesas RX65N on the Renesas RX65N board. STATUS: Work has just began on this port. config ARCH_BOARD_RX65N_GRROSE bool "RX65N on GR-ROSE renesas board" depends on ARCH_CHIP_R5F565NEHDFP select ARCH_HAVE_LEDS ---help--- This is a port of the renesas RX65N on the Renesas RX65N board. STATUS: Work has just began on this port. config ARCH_BOARD_S32K118EVB bool "NXP S32K118EVB" depends on ARCH_CHIP_S32K118 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This options selects support for NuttX on the NXP S32K118EVB board featuring the S32K118 Cortex-M0+. config ARCH_BOARD_S32K146EVB bool "NXP S32K146EVB" depends on ARCH_CHIP_S32K146 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This options selects support for NuttX on the NXP S32K146EVB board featuring the S32K146 Cortex-M4F. config ARCH_BOARD_S32K148EVB bool "NXP S32K148EVB" depends on ARCH_CHIP_S32K148 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This options selects support for NuttX on the NXP S32K148EVB board featuring the S32K148 Cortex-M4F. config ARCH_BOARD_SABRE_6QUAD bool "NXP/Freescale i.MX6 Sabre-6Quad board" depends on ARCH_CHIP_IMX6_6QUAD select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This options selects support for NuttX on the NXP/Freescale Sabre board featuring the iMX 6Quad CPU. config ARCH_BOARD_SAMA5D2_XULT bool "Atmel SAMA5D2 Xplained Ultra development board" depends on ARCH_CHIP_ATSAMA5D27 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- The port of NuttX to the Atmel SAMA5D2-XULT development board config ARCH_BOARD_SAMA5D3X_EK bool "Atmel SAMA5D3x-EK development board" depends on ARCH_CHIP_ATSAMA5D31 || ARCH_CHIP_ATSAMA5D33 || ARCH_CHIP_ATSAMA5D34 || ARCH_CHIP_ATSAMA5D35 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS select ARCH_PHY_INTERRUPT if NETDEVICES ---help--- The port of NuttX to the Atmel SAMA5D3x-EK development board (where x=1,3,4, or 5). config ARCH_BOARD_SAMA5D3_XPLAINED bool "Atmel SAMA5D3 Xplained development board" depends on ARCH_CHIP_ATSAMA5D36 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS select ARCH_PHY_INTERRUPT if NETDEVICES && (SAMA5_EMACA || SAMA5_EMAC0 || SAMA5_EMAC1 || SAMA5_GMAC) ---help--- The port of NuttX to the Atmel SAMA5D3 Xplained development board. config ARCH_BOARD_SAMA5D4_EK bool "Atmel SAMA5D4-EK development board" depends on ARCH_CHIP_ATSAMA5D44 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS select ARCH_PHY_INTERRUPT if NETDEVICES ---help--- The port of NuttX to the Atmel SAMA5D4-EK development board config ARCH_BOARD_SAMD20_XPLAINED bool "Atmel SAMD20-Xplained Pro development board" depends on ARCH_CHIP_SAMD20J18 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- The port of NuttX to the Atmel SAMD20-Xplained Pro development board. This board features the ATSAMD20J18A MCU (Cortex-M0+ with 256KB of FLASH and 32KB of SRAM). config ARCH_BOARD_SAMD21_XPLAINED bool "Atmel SAMD21-Xplained Pro development board" depends on ARCH_CHIP_SAMD21J18A select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- The port of NuttX to the Atmel SAMD21-Xplained Pro development board. This board features the ATSAMD21J18A MCU (Cortex-M0+ with 256KB of FLASH and 32KB of SRAM). config ARCH_BOARD_SAME54_XPLAINED_PRO bool "Atmel SAME54-Xplained Pro development board" depends on ARCH_CHIP_SAME54P20 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- The port of NuttX to the Atmel SAME54-Xplained Pro development board. config ARCH_BOARD_SAML21_XPLAINED bool "Atmel SAML21-Xplained Pro development board" depends on ARCH_CHIP_SAML21J18 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- The port of NuttX to the Atmel SAML21-Xplained Pro development board. This board features the ATSAML21J18A MCU (Cortex-M0+ with 256KB of FLASH and 32KB of SRAM). config ARCH_BOARD_SAM3UEK bool "Atmel SAM3U-EK development board" depends on ARCH_CHIP_ATSAM3U4E select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- The port of NuttX to the Atmel SAM3U-EK development board. config ARCH_BOARD_SAM4CMP_DB bool "Atmel SAM4CMP-DB development board" depends on ARCH_CHIP_ATSAM4CMP16B ---help--- The port of NuttX to the Atmel SAM4CMP-DB development board. config ARCH_BOARD_SAM4EEK bool "Atmel SAM4E-EK development board" depends on ARCH_CHIP_ATSAM4E16E select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS select ARCH_PHY_INTERRUPT if NETDEVICES ---help--- The port of NuttX to the Atmel SAM4E-EK development board. This board features the SAM4E16 MCU running at up to 120MHz. config ARCH_BOARD_SAM4L_XPLAINED bool "Atmel SAM4L-Xplained Pro development board" depends on ARCH_CHIP_ATSAM4LC4C select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- The port of NuttX to the Atmel SAM4L-Xplained Pro development board. config ARCH_BOARD_SAM4S_XPLAINED bool "Atmel SAM4S-Xplained development board" depends on ARCH_CHIP_ATSAM4S16C select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- The port of NuttX to the Atmel SAM4S-Xplained development board. config ARCH_BOARD_SAM4S_XPLAINED_PRO bool "Atmel SAM4S-Xplained Pro development board" depends on ARCH_CHIP_ATSAM4SD32C select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- The port of NuttX to the Atmel SAM4S-Xplained Pro development board. config ARCH_BOARD_SAME70_XPLAINED bool "Atmel SAME70 Xplained evaluation board" depends on ARCH_CHIP_SAME70Q21 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS select ARCH_PHY_INTERRUPT if NETDEVICES ---help--- The port of NuttX to the Atmel SAME70 Xplained evaluation board. config ARCH_BOARD_SAMV71_XULT bool "Atmel SAMV71 Xplained Ultra evaluation board" depends on ARCH_CHIP_SAMV71Q21 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS select ARCH_PHY_INTERRUPT if NETDEVICES ---help--- The port of NuttX to the Atmel SAMV71 Xplained Ultra evaluation board. config ARCH_BOARD_SHENZHOU bool "Shenzhou STM32F107 board" depends on ARCH_CHIP_STM32F107VC select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This port uses the Shenzhou STM32 F107 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. See the http://www.armjishu.com for further information. This board features the STMicro STM32F107VC MCU config ARCH_BOARD_SKP16C26 bool "Renesas SKP16C26 StarterKit" depends on ARCH_CHIP_M30262F8 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- Renesas M16C processor on the Renesas SKP16C26 StarterKit. This port uses the GNU m32c toolchain. STATUS: The port is complete but untested due to issues with compiler internal errors. config ARCH_BOARD_PHOTON bool "Photon wifi board" depends on ARCH_CHIP_STM32F205RG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- A configuration for the Photon from Particle Devices (https://www.particle.io). This board features the STM32F205RGY6 MCU from STMicro. config ARCH_BOARD_PNEV5180B bool "NXP PNEV5180B NFC Frontend Development Kit" depends on ARCH_CHIP_LPC1769 select ARCH_HAVE_LEDS ---help--- NXP Semiconductors' PN5180 NFC Frontend Development Kit. This board is based on the NXP LPC1769 MCU. config ARCH_BOARD_STM32_BUTTERFLY2 bool "Kamami STM32Butterfly2 development board" depends on ARCH_CHIP_STM32F107VC select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- A configuration for the Kamami STM32Butterfly2 development board based on STM32F107VC micro-controler chip with optional ETH board. See https://kamami.pl/zestawy-uruchomieniowe-stm32/178507-stm32butterfly2.html config ARCH_BOARD_STM32_TINY bool "STM32-Tiny board" depends on ARCH_CHIP_STM32F103C8 select ARCH_HAVE_LEDS ---help--- A configuration for the STM32 Tiny board. This board is based on a STM32F103C8T6 micro-controller chip, and is (always ?) bundled with an nRF24L01+ wireless module. config ARCH_BOARD_STM32F103_MINIMUM bool "STM32F103C8T6 Minimum ARM Development Board" depends on ARCH_CHIP_STM32F103C8 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- A configuration for the STM32F103 Minimum board. config ARCH_BOARD_STM3210E_EVAL bool "STMicro STM3210E-EVAL development board" depends on ARCH_CHIP_STM32F103ZE select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM3210E-EVAL development board based on the STMicro STM32F103ZET6 microcontroller (ARM Cortex-M3). This port uses the GNU Cortex-M3 toolchain. config ARCH_BOARD_STM3220G_EVAL bool "STMicro STM3220G-EVAL development board" depends on ARCH_CHIP_STM32F207IG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM3220G-EVAL development board based on the STMicro STM32F407IG microcontroller (ARM Cortex-M3). config ARCH_BOARD_STM3240G_EVAL bool "STMicro STM3240G-EVAL development board" depends on ARCH_CHIP_STM32F407IG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM3240G-EVAL development board based on the STMicro STM32F103ZET6 microcontroller (ARM Cortex-M4 with FPU). This port uses a GNU Cortex-M4 toolchain (such as CodeSourcery). config ARCH_BOARD_STM32F051_DISCOVERY bool "STMicro STM32F051-Discovery board" depends on ARCH_CHIP_STM32F051R8 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32F051-Discovery board based on the STMicro ARCH_CHIP_STM32F051R8 MCU. config ARCH_BOARD_STM32F072_DISCOVERY bool "STMicro STM32F072-Discovery board" depends on ARCH_CHIP_STM32F072RB select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32F072-Discovery board based on the STMicro ARCH_CHIP_STM32F072RB MCU. config ARCH_BOARD_STM32F3_DISCOVERY bool "STMicro STM32F3-Discovery board" depends on ARCH_CHIP_STM32F303VC select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32F3-Discovery board based on the STMicro STM32F303VCT6 MCU. config ARCH_BOARD_STM32F334_DISCO bool "STMicro STM32F334-Discovery board" depends on ARCH_CHIP_STM32F334C8 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32F334-Discovery board based on the STMicro STM32F334C8T6 MCU. config ARCH_BOARD_OMNIBUSF4 bool "OMNIBUSF4 flight controller" depends on ARCH_CHIP_STM32F405RG select ARCH_HAVE_LEDS ---help--- Flight controllers compatible with the OMINBUSF4 Betaflight target config ARCH_BOARD_STM32F4_DISCOVERY bool "STMicro STM32F4-Discovery board" depends on ARCH_CHIP_STM32F407VG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32F4-Discovery board based on the STMicro STM32F407VGT6 MCU. config ARCH_BOARD_STM32F411E_DISCO bool "STMicro STM32F411E-Discovery board" depends on ARCH_CHIP_STM32F411VE select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is a minimal configuration that supports low-level test of the STMicro STM32F411E-Discovery Board. config ARCH_BOARD_STM32F429I_DISCO bool "STMicro STM32F429I-Discovery board" depends on ARCH_CHIP_STM32F429Z select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32F429I-Discovery board based on the STMicro STM32F429ZIT6 MCU. config ARCH_BOARD_STM32F746G_DISCO bool "STMicro STM32F746G-Discovery board" depends on ARCH_CHIP_STM32F746NG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32F746G-DISCO development board featuring the STM32F746NGH6 MCU. The STM32F746NGH6 is a 216MHz Cortex-M7 operation with 1024Kb Flash memory and 320Kb SRAM. config ARCH_BOARD_STM32F769I_DISCO bool "STMicro STM32F769I-Discovery board" depends on ARCH_CHIP_STM32F769NI select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32F769I-DISCO development board featuring the STM32F769NIH6 MCU. The STM32F769NIH6 is a 216MHz Cortex-M7 with 2048Kb Flash memory and 512Kb SRAM. config ARCH_BOARD_STM32H747I_DISCO bool "STMicro STM32H747I-DISCO board" depends on ARCH_CHIP_STM32H747XI select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32H747I-DISCO development board featuring the STM32H747XIH6 MCU. The STM32H747XIH6 is a dual core (480MHz Cortex-M7, 240MHz Cortex-M4) with 2048Kb Flash memory and 1024Kb SRAM. config ARCH_BOARD_STM32F746_WS bool "Waveshare STM32F746 board" depends on ARCH_CHIP_STM32F746IG ---help--- Waveshare STM32F746 development board featuring the STM32F746IG MCU. config ARCH_BOARD_B_L072Z_LRWAN1 bool "B-L072Z-LRWAN1" depends on ARCH_CHIP_STM32L072CZ select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32L0 Discovery kit with LoRa/SigFox based on STM32L072CZ MCU. config ARCH_BOARD_B_L475E_IOT01A bool "STMicro IoT Discovery kit" depends on ARCH_CHIP_STM32L475VG select ARCH_HAVE_LEDS ---help--- STMicro IoT development board featuring the STM32L475VG MCU. The STM32L475VG is a Cortex-M4 optimised for low-power operation at up to 80MHz operation with 1024Kb Flash memory and 96+32Kb SRAM. config ARCH_BOARD_STM32L476VG_DISCO bool "STMicro STM32L476VG -Discovery board" depends on ARCH_CHIP_STM32L476RG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32L476VG_DISCO development board featuring the STM32L476VG MCU. The STM32L476VG is a Cortex-M4 optimised for low-power operation at up to 80MHz operation with 1024Kb Flash memory and 96+32Kb SRAM. config ARCH_BOARD_STM32L4R9AI_DISCO bool "STMicro STM32L4R9AI -Discovery board" depends on ARCH_CHIP_STM32L4R9AI select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32L4R9AI_DISCO development board featuring the STM32L4R9AI MCU. The STM32L4R9AI is a Cortex-M4 optimised for low-power operation at up to 120MHz operation with 2048Kb Flash memory and 192+64+384Kb SRAM. config ARCH_BOARD_STM32L476_MDK bool "Motorola Mods Development Kit (MDK)" depends on ARCH_CHIP_STM32L476RG select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Motorola Mods Development Board (MDK) features STM32L476ME MCU. The STM32L476ME is a Cortex-M4 optimised for low-power operation at up to 80MHz operation with 1024Kb Flash memory and 96+32Kb SRAM. config ARCH_BOARD_STM32L_DISCOVERY bool "STMicro STM32L-Discovery board" depends on ARCH_CHIP_STM32L152RB || ARCH_CHIP_STM32L152RC select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32L-Discovery board based on the STMicro STM32L152RBT6 or STM32L152RCT6 MCUs. config ARCH_BOARD_STM32VL_DISCOVERY bool "STMicro STM32VL-Discovery board" depends on ARCH_CHIP_STM32F100RB select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32VL-Discovery board based on the STMicro STM32F100RB MCU. config ARCH_BOARD_MIKROE_STM32F4 bool "MikroElektronika Mikromedia for STM32F4 board" depends on ARCH_CHIP_STM32F407VG ---help--- This is the port NuttX to the Mikroelektronika Mikromedia for STM32F4 Multimedia Board (MMB). See http://www.mikroe.com/ for further information. config ARCH_BOARD_SUREPIC32MX bool "Sure PIC32MX boards" depends on ARCH_CHIP_PIC32MX440F512H select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- The "Advanced USB Storage Demo Board," Model DB-DP11215, from Sure Electronics (http://www.sureelectronics.net/). This board features the MicroChip PIC32MX440F512H. See also http://www.sureelectronics.net/goods.php?id=1168 for further information about the Sure DB-DP11215 board. config ARCH_BOARD_TEENSY_20 bool "PJRC Teensy++ 2.0 board" depends on ARCH_CHIP_AT90USB1286 select ARCH_HAVE_LEDS ---help--- This is the port of NuttX to the PJRC Teensy++ 2.0 board. This board is developed by http://pjrc.com/teensy/. The Teensy++ 2.0 is based on an Atmel AT90USB1286 MCU. config ARCH_BOARD_TEENSY_3X bool "PJRC Teensy++ 3.1 board" depends on ARCH_CHIP_MK20DX256VLH7 || ARCH_CHIP_MK20DX128VLH5 select ARCH_HAVE_LEDS ---help--- This is the port of NuttX to the PJRC Teensy++ 2.0 board. This board is developed by http://pjrc.com/teensy/. The Teensy++ 2.0 is based on an Atmel AT90USB1286 MCU. This is the port of NuttX to the Teensy-3.1 from PJRC (https://www.pjrc.com/). The Teensy-3.1 features the Freescale MK30DX256VLH7 chip (now NXP). The MK30DX256VLH7 is a 64-pin Cortex-M4 running at 72MHz. It has 256KiB of program FLASH memory and 64KiB of SRAM. For more information about the Teensy 3.1, see https://www.pjrc.com/teensy/teensy31.html https://www.pjrc.com/store/teensy31.html This board configuration can also be used with the older Teensy-3.0. The Teensy-3.0 has the same schematic (although some pins are not used on the Teensy-3.0). the primary difference is that the Teensy 3.0 has a MK20DX128VLH5 with slightly less capability. config ARCH_BOARD_TEENSY_LC bool "Teensy LC" depends on ARCH_CHIP_MKL25Z64 select ARCH_HAVE_LEDS ---help--- This is the configuration for the Teensy LC board. See https://www.pjrc.com/teensy/teensyLC.html. The Teensy LC is based on the Freescale KL25Z. config ARCH_BOARD_TM4C123G_LAUNCHPAD bool "Tiva TM4C123G LaunchPad" depends on ARCH_CHIP_TM4C123GH6PM select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Tiva TM4C123G LaunchPad. config ARCH_BOARD_TM4C1294_LAUNCHPAD bool "Tiva EK-TM4C1294XL LaunchPad" depends on ARCH_CHIP_TM4C1294NCPDT select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Tiva EK-TM4C1294XL LaunchPad. config ARCH_BOARD_TMS570LS31X_USB_KIT bool "TI TMS570LS31X_USB_KIT" depends on ARCH_CHIP_TMS570LS3137ZWT select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- TI Hercules TMS570LS31xx Evaluation Kit (TMDS570ls31xx USB Kit) featuring the Hercules TMS570LS3137ZWT chip. config ARCH_BOARD_TWR_K60N512 bool "FreeScale TWR-K60N512 development board" depends on ARCH_CHIP_MK60N512VMD100 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Kinetis K60 Cortex-M4 MCU. This port uses the FreeScale TWR-K60N512 development board. config ARCH_BOARD_TWR_K64F120M bool "Freescale TWR-K64F120M development board" depends on ARCH_CHIP_MK64FN1M0VMD12 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Kinetis K64 Cortex-M4 MCU. This port uses the Freescale TWR-K64F120M development board. config ARCH_BOARD_U_BLOX_C027 bool "u-blox C027" depends on ARCH_CHIP_LPC1768 select ARCH_HAVE_LEDS ---help--- u-blox GSM and GPS module evaluation board with NXP LPCExpresso LPC1768. The GSM module is one of LISA-C200, LISA-U200 or SARA-G350. The GPS module is one of MAX-M7 or MAX-M8. config ARCH_BOARD_UBW32 bool "UBW32 v2.4 board from Sparkfun" depends on ARCH_CHIP_PIC32MX460F512L select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- This is the port to the Sparkfun UBW32 board. This port uses the original v2.4 board which is based on the MicroChip PIC32MX460F512L. See http://www.sparkfun.com/products/8971. This older version has been replaced with this board http://www.sparkfun.com/products/9713. See also http://www.schmalzhaus.com/UBW32/. config ARCH_BOARD_US7032EVB1 bool "Hitachi SH-1/US7032EVB1 board" depends on ARCH_CHIP_SH7032 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board. STATUS: Work has just began on this port. config ARCH_BOARD_VIEWTOOL_STM32F107 bool "ViewTool STM32F103/F107" depends on ARCH_CHIP_STM32F107VC || ARCH_CHIP_STM32F103VC select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- This port uses the ViewTool STM32F103/F107 V1.2 board. This board may be fitted with either: (1) STM32F107VCT6 or (2) STM32F103VCT6. See http://www.viewtool.com/ for further information. config ARCH_BOARD_XMC4500RELAX bool "Infineon XMC4500 Relax" depends on ARCH_CHIP_XMC4500 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- Infineon XMC4000 Relax Lite v1 config ARCH_BOARD_Z16F2800100ZCOG bool "Zilog Z16F2800100ZCOG Development Kit" depends on ARCH_CHIP_Z16F2811 select ARCH_HAVE_LEDS ---help--- z16f Microcontroller. This port uses the ZiLOG z16f2800100zcog development kit and the Zilog ZDS-II Windows command line tools. The development environment is Cygwin under WinXP. config ARCH_BOARD_Z80SIM bool "Z80 Instruction Set Simulator" depends on ARCH_CHIP_Z80 select UART_SERIALDRIVER ---help--- z80 Microcontroller. This port uses a Z80 instruction set simulator called z80sim. This port also uses the SDCC toolchain (http://sdcc.sourceforge.net/") (verified with version 2.6.0). config ARCH_BOARD_Z8ENCORE000ZCO bool "ZiLOG Z8ENCORE000ZCO Development Kit" depends on ARCH_CHIP_Z8F6403 select ARCH_HAVE_LEDS ---help--- z8Encore! Microcontroller. This port use the ZiLOG Z8ENCORE000ZCO development kit, Z8F6403 part, and the Zilog ZDS-II Windows command line tools. The development environment is Cygwin under WinXP. config ARCH_BOARD_Z8F64200100KIT bool "ZiLOG Z8F64200100KIT Development Kit" depends on ARCH_CHIP_Z8F6423 select ARCH_HAVE_LEDS ---help--- z8Encore! Microcontroller. This port use the Zilog Z8F64200100KIT development kit, Z8F6423 part, and the Zilog ZDS-II Windows command line tools. The development environment is Cygwin under WinXP. config ARCH_BOARD_ZP214XPA bool "The0.net LPC2148 Development Board" depends on ARCH_CHIP_LPC214X ---help--- This port is for the NXP LPC2148 as provided on the The0.net ZPA213X/4XPA development board. Includes support for the UG-2864AMBAG01 OLED also from The0.net config ARCH_BOARD_ZKITARM bool "Zilogic ZKit-ARM-1769 Development Kit" depends on ARCH_CHIP_LPC1768 select ARCH_HAVE_LEDS ---help--- Zilogic System's ARM development Kit, ZKIT-ARM-1769. This board is based on the NXP LPC1769. The Nuttx Buildroot toolchain is used by default. config ARCH_BOARD_SPRESENSE bool "Sony Spresense Board" depends on ARCH_CHIP_CXD56XX select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS select ARCH_HAVE_POWEROFF ---help--- none config ARCH_BOARD_SIM bool "User mode simulation" depends on ARCH_SIM ---help--- A user-mode port of NuttX to the x86 Linux/Cygwin platform is available. The purpose of this port is primarily to support OS feature development. This port does not support interrupts or a real timer (and hence no round robin scheduler) Otherwise, it is complete. config ARCH_BOARD_CUSTOM bool "Custom development board" ---help--- Select this option if there is no directory for the board under boards/. Don't see the board you want? You must first select the exact MCU part number, then the boards supporting that part will be available for selection. endchoice if ARCH_BOARD_CUSTOM menu "Custom Board Configuration" config ARCH_BOARD_CUSTOM_NAME string "Custom board name" default "" ---help--- This is a name for the board. It is not used except to return the information via the NSH uname command. config ARCH_BOARD_CUSTOM_DIR string "Custom board directory" default "" ---help--- If the custom board configuration is selected, then it is necessary to also tell the build system where it can find the board directory for the custom board. In this case, the board directory is assumed to lie outside the NuttX directory. The provided path must then be a full, absolute path to some location outside of the NuttX source tree (like "~/projects/myboard"). config ARCH_BOARD_CUSTOM_DIR_RELPATH bool "Relative custom board directory" default y ---help--- Specifies that the board directory is relative to the NuttX directory. config BOARD_CUSTOM_LEDS bool "Custom board LEDs" default n select ARCH_HAVE_LEDS config BOARD_CUSTOM_BUTTONS bool "Custom board buttons" default n select ARCH_HAVE_BUTTONS select ARCH_BUTTONS config BOARD_CUSTOM_IRQBUTTONS bool "Custom Board IRQ buttons" default n depends on BOARD_CUSTOM_BUTTONS select ARCH_HAVE_IRQBUTTONS select ARCH_IRQBUTTONS config BOARD_CUSTOM_INTERRUPT bool "Custom board PHY interrupts" default n depends on NETDEVICES select ARCH_PHY_INTERRUPT if NETDEVICES endmenu # Custom Board Configuration endif #ARCH_BOARD_CUSTOM config ARCH_BOARD string default "amber" if ARCH_BOARD_AMBER default "arduino-mega2560" if ARCH_BOARD_ARDUINO_MEGA2560 default "arduino-due" if ARCH_BOARD_ARDUINO_DUE default "arduino-m0" if ARCH_BOARD_ARDUINO_M0 default "avr32dev1" if ARCH_BOARD_AVR32DEV1 default "axoloti" if ARCH_BOARD_AXOLOTI default "bambino-200e" if ARCH_BOARD_BAMBINO_200E default "c5471evm" if ARCH_BOARD_C5471EVM default "clicker2-stm32" if ARCH_BOARD_CLICKER2_STM32 default "cloudctrl" if ARCH_BOARD_CLOUDCTRL default "demo9s12ne64" if ARCH_BOARD_DEMOS92S12NEC64 default "dk-tm4c129x" if ARCH_BOARD_DK_TM4C129X default "ea3131" if ARCH_BOARD_EA3131 default "ea3152" if ARCH_BOARD_EA3152 default "eagle100" if ARCH_BOARD_EAGLE100 default "efm32-g8xx-stk" if ARCH_BOARD_EFM32G8XXSTK default "efm32gg-stk3700" if ARCH_BOARD_EFM32GG_STK3700 default "ekk-lm3s9b96" if ARCH_BOARD_EKKLM3S9B96 default "esp32-core" if ARCH_BOARD_ESP32CORE default "ez80f910200kitg" if ARCH_BOARD_EZ80F910200KITG default "ez80f910200zco" if ARCH_BOARD_EZ80F910200ZCO default "fire-stm32v2" if ARCH_BOARD_FIRE_STM32 default "flipnclick-pic32mz" if ARCH_BOARD_FLIPNCLICK_PIC32MZ default "flipnclick-sam3x" if ARCH_BOARD_FLIPNCLICK_SAM3X default "freedom-k28f" if ARCH_BOARD_FREEDOM_K28F default "freedom-k64f" if ARCH_BOARD_FREEDOM_K64F default "freedom-k66f" if ARCH_BOARD_FREEDOM_K66F default "freedom-kl25z" if ARCH_BOARD_FREEDOM_KL25Z default "freedom-kl26z" if ARCH_BOARD_FREEDOM_KL26Z default "gapuino" if ARCH_BOARD_GAPUINO default "hifive1-revb" if ARCH_BOARD_HIFIVE1_REVB default "hymini-stm32v" if ARCH_BOARD_HYMINI_STM32V default "imxrt1020-evk" if ARCH_BOARD_IMXRT1020_EVK default "imxrt1050-evk" if ARCH_BOARD_IMXRT1050_EVK default "imxrt1060-evk" if ARCH_BOARD_IMXRT1060_EVK default "kwikstik-k40" if ARCH_BOARD_KWIKSTIK_K40 default "launchxl-cc1310" if ARCH_BOARD_LAUNCHXL_CC1310 default "launchxl-cc1312r1" if ARCH_BOARD_LAUNCHXL_CC1312R1 default "launchxl-tms57004" if ARCH_BOARD_LAUNCHXL_TMS57004 default "lc823450-xgevk" if ARCH_BOARD_LC823450_XGEVK default "lincoln60" if ARCH_BOARD_LINCOLN60 default "lm3s6432-s2e" if ARCH_BOARD_LM3S6432S2E default "lm3s6965-ek" if ARCH_BOARD_LM3S6965EK default "lm3s8962-ek" if ARCH_BOARD_LM3S8962EK default "lm4f120-launchpad" if ARCH_BOARD_LM4F120_LAUNCHPAD default "lpc4088-devkit" if ARCH_BOARD_LPC4088_DEVKIT default "lpc4088-quickstart" if ARCH_BOARD_LPC4088_QUICKSTART default "lpc4330-xplorer" if ARCH_BOARD_LPC4330_XPLORER default "lpc4337-ws" if ARCH_BOARD_LPC4337_WS default "lpc4357-evb" if ARCH_BOARD_LPC4357_EVB default "lpc4370-link2" if ARCH_BOARD_LPC4370_LINK2 default "lpcxpresso-lpc1768" if ARCH_BOARD_LPCXPRESSO default "lpcxpresso-lpc54628" if ARCH_BOARD_LPCXPRESSO_LPC54628 default "lx_cpu" if ARCH_BOARD_LX_CPU default "maix-bit" if ARCH_BOARD_MAIX_BIT default "maple" if ARCH_BOARD_MAPLE default "makerlisp" if ARCH_BOARD_MAKERLISP default "max32660-evsys" if ARCH_BOARD_MAX32660_EVSYS default "mbed" if ARCH_BOARD_MBED default "mcb1700" if ARCH_BOARD_MCB1700 default "mcu123-lpc214x" if ARCH_BOARD_MCU123_LPC214X default "metro-m4" if ARCH_BOARD_METRO_M4 default "micropendous3" if ARCH_BOARD_MICROPENDOUS3 default "mirtoo" if ARCH_BOARD_MIRTOO default "misoc" if ARCH_BOARD_MISOC_QEMU || ARCH_BOARD_MISOC_VERILATOR default "moteino-mega" if ARCH_BOARD_MOTEINO_MEGA default "ne64badge" if ARCH_BOARD_NE64BADGE default "nrf52-feather" if ARCH_BOARD_NRF52_FEATHER default "nrf52832-dk" if ARCH_BOARD_NRF52832_DK default "nrf52840-dk" if ARCH_BOARD_NRF52840_DK default "nrf52840-dongle" if ARCH_BOARD_NRF52840_DONGLE default "ntosd-dm320" if ARCH_BOARD_NTOSD_DM320 default "nucleo-144" if ARCH_BOARD_NUCLEO_144 default "nucleo-f072rb" if ARCH_BOARD_NUCLEO_F072RB default "nucleo-f091rc" if ARCH_BOARD_NUCLEO_F091RC default "nucleo-f103rb" if ARCH_BOARD_NUCLEO_F103RB default "nucleo-f207zg" if ARCH_BOARD_NUCLEO_F207ZG default "nucleo-f302r8" if ARCH_BOARD_NUCLEO_F302R8 default "nucleo-f303re" if ARCH_BOARD_NUCLEO_F303RE default "nucleo-f303ze" if ARCH_BOARD_NUCLEO_F303ZE default "nucleo-f334r8" if ARCH_BOARD_NUCLEO_F334R8 default "nucleo-f4x1re" if ARCH_BOARD_NUCLEO_F401RE || ARCH_BOARD_NUCLEO_F411RE default "nucleo-f446re" if ARCH_BOARD_NUCLEO_F446RE default "nucleo-f410rb" if ARCH_BOARD_NUCLEO_F410RB default "nucleo-g070rb" if ARCH_BOARD_NUCLEO_G070RB default "nucleo-g071rb" if ARCH_BOARD_NUCLEO_G071RB default "nucleo-h743zi" if ARCH_BOARD_NUCLEO_H743ZI default "nucleo-l073rz" if ARCH_BOARD_NUCLEO_L073RZ default "nucleo-l152re" if ARCH_BOARD_NUCLEO_L152RE default "nucleo-l432kc" if ARCH_BOARD_NUCLEO_L432KC default "nucleo-l452re" if ARCH_BOARD_NUCLEO_L452RE default "nucleo-l476rg" if ARCH_BOARD_NUCLEO_L476RG default "nucleo-l496zg" if ARCH_BOARD_NUCLEO_L496ZG default "nutiny-nuc120" if ARCH_BOARD_NUTINY_NUC120 default "nr5m100-nexys4" if ARCH_BOARD_NR5M100_NEXYS4 default "olimex-efm32g880f128-stk" if ARCH_BOARD_OLIMEX_EFM32G880F128_STK default "olimex-lpc1766stk" if ARCH_BOARD_LPC1766STK default "olimex-lpc2378" if ARCH_BOARD_OLIMEXLPC2378 default "olimex-lpc-h3131" if ARCH_BOARD_OLIMEX_LPC_H3131 default "olimex-stm32-h405" if ARCH_BOARD_OLIMEX_STM32H405 default "olimex-stm32-h407" if ARCH_BOARD_OLIMEX_STM32H407 default "olimex-stm32-e407" if ARCH_BOARD_OLIMEX_STM32E407 default "olimex-stm32-p107" if ARCH_BOARD_OLIMEX_STM32P107 default "olimex-stm32-p207" if ARCH_BOARD_OLIMEX_STM32P207 default "olimex-stm32-p407" if ARCH_BOARD_OLIMEX_STM32P407 default "olimex-strp711" if ARCH_BOARD_OLIMEX_STRP711 default "olimexino-stm32" if ARCH_BOARD_OLIMEXINO_STM32 default "omnibusf4" if ARCH_BOARD_OMNIBUSF4 default "open1788" if ARCH_BOARD_OPEN1788 default "or1k" if ARCH_BOARD_OR1K default "p112" if ARCH_BOARD_P112 default "pcduino-a10" if ARCH_BOARD_PCDUINO_A10 default "beaglebone-black" if ARCH_BOARD_BEAGLEBONE_BLACK default "pic32mx-starterkit" if ARCH_BOARD_PIC32MX_STARTERKIT default "pic32mx7mmb" if ARCH_BOARD_PIC32MX7MMB default "pic32mz-starterkit" if ARCH_BOARD_PIC32MZ_STARTERKIT default "qemu-i486" if ARCH_BOARD_QEMU_I486 default "rx65n" if ARCH_BOARD_RX65N default "rx65n" if ARCH_BOARD_RX65N_RSK1MB default "rx65n" if ARCH_BOARD_RX65N_RSK2MB default "rx65n" if ARCH_BOARD_RX65N_GRROSE default "s32k118evb" if ARCH_BOARD_S32K118EVB default "s32k146evb" if ARCH_BOARD_S32K146EVB default "s32k148evb" if ARCH_BOARD_S32K148EVB default "sabre-6quad" if ARCH_BOARD_SABRE_6QUAD default "sama5d2-xult" if ARCH_BOARD_SAMA5D2_XULT default "sama5d3x-ek" if ARCH_BOARD_SAMA5D3X_EK default "sama5d3-xplained" if ARCH_BOARD_SAMA5D3_XPLAINED default "sama5d4-ek" if ARCH_BOARD_SAMA5D4_EK default "samd20-xplained" if ARCH_BOARD_SAMD20_XPLAINED default "samd21-xplained" if ARCH_BOARD_SAMD21_XPLAINED default "same54-xplained-pro" if ARCH_BOARD_SAME54_XPLAINED_PRO default "saml21-xplained" if ARCH_BOARD_SAML21_XPLAINED default "sam3u-ek" if ARCH_BOARD_SAM3UEK default "sam4cmp-db" if ARCH_BOARD_SAM4CMP_DB default "sam4e-ek" if ARCH_BOARD_SAM4EEK default "sam4l-xplained" if ARCH_BOARD_SAM4L_XPLAINED default "sam4s-xplained" if ARCH_BOARD_SAM4S_XPLAINED default "sam4s-xplained-pro" if ARCH_BOARD_SAM4S_XPLAINED_PRO default "same70-xplained" if ARCH_BOARD_SAME70_XPLAINED default "samv71-xult" if ARCH_BOARD_SAMV71_XULT default "shenzhou" if ARCH_BOARD_SHENZHOU default "skp16c26" if ARCH_BOARD_SKP16C26 default "photon" if ARCH_BOARD_PHOTON default "pnev5180b" if ARCH_BOARD_PNEV5180B default "stm32butterfly2" if ARCH_BOARD_STM32_BUTTERFLY2 default "stm32_tiny" if ARCH_BOARD_STM32_TINY default "stm32f051-discovery" if ARCH_BOARD_STM32F051_DISCOVERY default "stm32f072-discovery" if ARCH_BOARD_STM32F072_DISCOVERY default "stm32f103-minimum" if ARCH_BOARD_STM32F103_MINIMUM default "stm3210e-eval" if ARCH_BOARD_STM3210E_EVAL default "stm3220g-eval" if ARCH_BOARD_STM3220G_EVAL default "stm3240g-eval" if ARCH_BOARD_STM3240G_EVAL default "stm32f3discovery" if ARCH_BOARD_STM32F3_DISCOVERY default "stm32f334-disco" if ARCH_BOARD_STM32F334_DISCO default "stm32f4discovery" if ARCH_BOARD_STM32F4_DISCOVERY default "stm32f411e-disco" if ARCH_BOARD_STM32F411E_DISCO default "stm32f429i-disco" if ARCH_BOARD_STM32F429I_DISCO default "stm32f746g-disco" if ARCH_BOARD_STM32F746G_DISCO default "stm32f769i-disco" if ARCH_BOARD_STM32F769I_DISCO default "stm32h747i-disco" if ARCH_BOARD_STM32H747I_DISCO default "stm32f746-ws" if ARCH_BOARD_STM32F746_WS default "b-l072z-lrwan1" if ARCH_BOARD_B_L072Z_LRWAN1 default "b-l475e-iot01a" if ARCH_BOARD_B_L475E_IOT01A default "stm32l476vg-disco" if ARCH_BOARD_STM32L476VG_DISCO default "stm32l476-mdk" if ARCH_BOARD_STM32L476_MDK default "stm32l4r9ai-disco" if ARCH_BOARD_STM32L4R9AI_DISCO default "stm32ldiscovery" if ARCH_BOARD_STM32L_DISCOVERY default "stm32vldiscovery" if ARCH_BOARD_STM32VL_DISCOVERY default "mikroe-stm32f4" if ARCH_BOARD_MIKROE_STM32F4 default "sure-pic32mx" if ARCH_BOARD_SUREPIC32MX default "teensy-2.0" if ARCH_BOARD_TEENSY_20 default "teensy-3.x" if ARCH_BOARD_TEENSY_3X default "teensy-lc" if ARCH_BOARD_TEENSY_LC default "tm4c123g-launchpad" if ARCH_BOARD_TM4C123G_LAUNCHPAD default "tm4c1294-launchpad" if ARCH_BOARD_TM4C1294_LAUNCHPAD default "tms570ls31x-usb-kit" if ARCH_BOARD_TMS570LS31X_USB_KIT default "twr-k60n512" if ARCH_BOARD_TWR_K60N512 default "twr-k64f120m" if ARCH_BOARD_TWR_K64F120M default "u-blox-c027" if ARCH_BOARD_U_BLOX_C027 default "ubw32" if ARCH_BOARD_UBW32 default "us7032evb1" if ARCH_BOARD_US7032EVB1 default "viewtool-stm32f107" if ARCH_BOARD_VIEWTOOL_STM32F107 default "xmc4500-relax" if ARCH_BOARD_XMC4500RELAX default "z16f2800100zcog" if ARCH_BOARD_Z16F2800100ZCOG default "z80sim" if ARCH_BOARD_Z80SIM default "z8encore000zco" if ARCH_BOARD_Z8ENCORE000ZCO default "z8f64200100kit" if ARCH_BOARD_Z8F64200100KIT default "zp214xpa" if ARCH_BOARD_ZP214XPA default "zkit-arm-1769" if ARCH_BOARD_ZKITARM default "sim" if ARCH_BOARD_SIM default "moxa" if ARCH_BOARD_MOXA default "spresense" if ARCH_BOARD_SPRESENSE comment "Common Board Options" config ARCH_HAVE_LEDS bool config ARCH_LEDS bool "Board LED Status support" default y depends on ARCH_HAVE_LEDS ---help--- Use board LEDs to show NuttX execution status state. Unique to boards that have LEDs config ARCH_HAVE_BUTTONS bool config ARCH_BUTTONS bool "Board button support" default n depends on ARCH_HAVE_BUTTONS ---help--- "Support interfaces to use buttons provided by the board." config ARCH_HAVE_IRQBUTTONS bool config ARCH_IRQBUTTONS bool "Button interrupt support" default n depends on ARCH_BUTTONS && ARCH_HAVE_IRQBUTTONS ---help--- "Support interrupts on button presses and releases." comment "Board-Specific Options" if ARCH_BOARD_PCDUINO_A10 source "boards/arm/a1x/pcduino-a10/Kconfig" endif if ARCH_BOARD_BEAGLEBONE_BLACK source "boards/arm/am335x/beaglebone-black/Kconfig" endif if ARCH_BOARD_C5471EVM source "boards/arm/c5471/c5471evm/Kconfig" endif if ARCH_BOARD_SPRESENSE source "boards/arm/cxd56xx/spresense/Kconfig" endif if ARCH_BOARD_NTOSD_DM320 source "boards/arm/dm320/ntosd-dm320/Kconfig" endif if ARCH_BOARD_EFM32G8XXSTK source "boards/arm/efm32/efm32-g8xx-stk/Kconfig" endif if ARCH_BOARD_EFM32GG_STK3700 source "boards/arm/efm32/efm32gg-stk3700/Kconfig" endif if ARCH_BOARD_OLIMEX_EFM32G880F128_STK source "boards/arm/efm32/olimex-efm32g880f128-stk/Kconfig" endif if ARCH_BOARD_S32K118EVB source "boards/arm/s32k1xx/s32k118evb/Kconfig" endif if ARCH_BOARD_S32K146EVB source "boards/arm/s32k1xx/s32k146evb/Kconfig" endif if ARCH_BOARD_S32K148EVB source "boards/arm/s32k1xx/s32k148evb/Kconfig" endif if ARCH_BOARD_SABRE_6QUAD source "boards/arm/imx6/sabre-6quad/Kconfig" endif if ARCH_BOARD_IMXRT1020_EVK source "boards/arm/imxrt/imxrt1020-evk/Kconfig" endif if ARCH_BOARD_IMXRT1050_EVK source "boards/arm/imxrt/imxrt1050-evk/Kconfig" endif if ARCH_BOARD_IMXRT1060_EVK source "boards/arm/imxrt/imxrt1060-evk/Kconfig" endif if ARCH_BOARD_FREEDOM_K28F source "boards/arm/kinetis/freedom-k28f/Kconfig" endif if ARCH_BOARD_FREEDOM_K64F source "boards/arm/kinetis/freedom-k64f/Kconfig" endif if ARCH_BOARD_FREEDOM_K66F source "boards/arm/kinetis/freedom-k66f/Kconfig" endif if ARCH_BOARD_KWIKSTIK_K40 source "boards/arm/kinetis/kwikstik-k40/Kconfig" endif if ARCH_BOARD_TEENSY_3X source "boards/arm/kinetis/teensy-3.x/Kconfig" endif if ARCH_BOARD_TWR_K60N512 source "boards/arm/kinetis/twr-k60n512/Kconfig" endif if ARCH_BOARD_TWR_K64F120M source "boards/arm/kinetis/twr-k64f120m/Kconfig" endif if ARCH_BOARD_FREEDOM_KL25Z source "boards/arm/kl/freedom-kl25z/Kconfig" endif if ARCH_BOARD_FREEDOM_KL26Z source "boards/arm/kl/freedom-kl26z/Kconfig" endif if ARCH_BOARD_TEENSY_LC source "boards/arm/kl/teensy-lc/Kconfig" endif if ARCH_BOARD_LC823450_XGEVK source "boards/arm/lc823450/lc823450-xgevk/Kconfig" endif if ARCH_BOARD_LINCOLN60 source "boards/arm/lpc17xx_40xx/lincoln60/Kconfig" endif if ARCH_BOARD_LPC4088_DEVKIT source "boards/arm/lpc17xx_40xx/lpc4088-devkit/Kconfig" endif if ARCH_BOARD_LPC4088_QUICKSTART source "boards/arm/lpc17xx_40xx/lpc4088-quickstart/Kconfig" endif if ARCH_BOARD_LPCXPRESSO source "boards/arm/lpc17xx_40xx/lpcxpresso-lpc1768/Kconfig" endif if ARCH_BOARD_MBED source "boards/arm/lpc17xx_40xx/mbed/Kconfig" endif if ARCH_BOARD_MCB1700 source "boards/arm/lpc17xx_40xx/mcb1700/Kconfig" endif if ARCH_BOARD_LPC1766STK source "boards/arm/lpc17xx_40xx/olimex-lpc1766stk/Kconfig" endif if ARCH_BOARD_OPEN1788 source "boards/arm/lpc17xx_40xx/open1788/Kconfig" endif if ARCH_BOARD_PNEV5180B source "boards/arm/lpc17xx_40xx/pnev5180b/Kconfig" endif if ARCH_BOARD_U_BLOX_C027 source "boards/arm/lpc17xx_40xx/u-blox-c027/Kconfig" endif if ARCH_BOARD_ZKITARM source "boards/arm/lpc17xx_40xx/zkit-arm-1769/Kconfig" endif if ARCH_BOARD_MCU123_LPC214X source "boards/arm/lpc214x/mcu123-lpc214x/Kconfig" endif if ARCH_BOARD_ZP214XPA source "boards/arm/lpc214x/zp214xpa/Kconfig" endif if ARCH_BOARD_OLIMEXLPC2378 source "boards/arm/lpc2378/olimex-lpc2378/Kconfig" endif if ARCH_BOARD_EA3131 source "boards/arm/lpc31xx/ea3131/Kconfig" endif if ARCH_BOARD_EA3152 source "boards/arm/lpc31xx/ea3152/Kconfig" endif if ARCH_BOARD_OLIMEX_LPC_H3131 source "boards/arm/lpc31xx/olimex-lpc-h3131/Kconfig" endif if ARCH_BOARD_BAMBINO_200E source "boards/arm/lpc43xx/bambino-200e/Kconfig" endif if ARCH_BOARD_LPC4330_XPLORER source "boards/arm/lpc43xx/lpc4330-xplorer/Kconfig" endif if ARCH_BOARD_LPC4337_WS source "boards/arm/lpc43xx/lpc4337-ws/Kconfig" endif if ARCH_BOARD_LPC4357_EVB source "boards/arm/lpc43xx/lpc4357-evb/Kconfig" endif if ARCH_BOARD_LPC4370_LINK2 source "boards/arm/lpc43xx/lpc4370-link2/Kconfig" endif if ARCH_BOARD_LPCXPRESSO_LPC54628 source "boards/arm/lpc54xx/lpcxpresso-lpc54628/Kconfig" endif if ARCH_BOARD_LX_CPU source "boards/arm/lpc17xx_40xx/lx_cpu/Kconfig" endif if ARCH_BOARD_MAX32660_EVSYS source "boards/arm/max326xx/max32660-evsys/Kconfig" endif if ARCH_BOARD_MOXA source "boards/arm/moxart/moxa/Kconfig" endif if ARCH_BOARD_NRF52_FEATHER source "boards/arm/nrf52/nrf52-feather/Kconfig" endif if ARCH_BOARD_NRF52832_DK source "boards/arm/nrf52/nrf52832-dk/Kconfig" endif if ARCH_BOARD_NRF52840_DK source "boards/arm/nrf52/nrf52840-dk/Kconfig" endif if ARCH_BOARD_NUTINY_NUC120 source "boards/arm/nuc1xx/nutiny-nuc120/Kconfig" endif if ARCH_BOARD_ARDUINO_DUE source "boards/arm/sam34/arduino-due/Kconfig" endif if ARCH_BOARD_ARDUINO_M0 source "boards/arm/samd2l2/arduino-m0/Kconfig" endif if ARCH_BOARD_FLIPNCLICK_SAM3X source "boards/arm/sam34/flipnclick-sam3x/Kconfig" endif if ARCH_BOARD_SAM3UEK source "boards/arm/sam34/sam3u-ek/Kconfig" endif if ARCH_BOARD_SAM4CMP_DB source "boards/arm/sam34/sam4cmp-db/Kconfig" endif if ARCH_BOARD_SAM4EEK source "boards/arm/sam34/sam4e-ek/Kconfig" endif if ARCH_BOARD_SAM4L_XPLAINED source "boards/arm/sam34/sam4l-xplained/Kconfig" endif if ARCH_BOARD_SAM4S_XPLAINED source "boards/arm/sam34/sam4s-xplained/Kconfig" endif if ARCH_BOARD_SAM4S_XPLAINED_PRO source "boards/arm/sam34/sam4s-xplained-pro/Kconfig" endif if ARCH_BOARD_SAMA5D2_XULT source "boards/arm/sama5/sama5d2-xult/Kconfig" endif if ARCH_BOARD_SAMA5D3X_EK source "boards/arm/sama5/sama5d3x-ek/Kconfig" endif if ARCH_BOARD_SAMA5D3_XPLAINED source "boards/arm/sama5/sama5d3-xplained/Kconfig" endif if ARCH_BOARD_SAMA5D4_EK source "boards/arm/sama5/sama5d4-ek/Kconfig" endif if ARCH_BOARD_SAMD20_XPLAINED source "boards/arm/samd2l2/samd20-xplained/Kconfig" endif if ARCH_BOARD_SAMD21_XPLAINED source "boards/arm/samd2l2/samd21-xplained/Kconfig" endif if ARCH_BOARD_SAME54_XPLAINED_PRO source "boards/arm/samd5e5/same54-xplained-pro/Kconfig" endif if ARCH_BOARD_SAML21_XPLAINED source "boards/arm/samd2l2/saml21-xplained/Kconfig" endif if ARCH_BOARD_METRO_M4 source "boards/arm/samd5e5/metro-m4/Kconfig" endif if ARCH_BOARD_SAME70_XPLAINED source "boards/arm/samv7/same70-xplained/Kconfig" endif if ARCH_BOARD_SAMV71_XULT source "boards/arm/samv7/samv71-xult/Kconfig" endif if ARCH_BOARD_B_L072Z_LRWAN1 source "boards/arm/stm32f0l0g0/b-l072z-lrwan1/Kconfig" endif if ARCH_BOARD_NUCLEO_F072RB source "boards/arm/stm32f0l0g0/nucleo-f072rb/Kconfig" endif if ARCH_BOARD_NUCLEO_F091RC source "boards/arm/stm32f0l0g0/nucleo-f091rc/Kconfig" endif if ARCH_BOARD_NUCLEO_G070RB source "boards/arm/stm32f0l0g0/nucleo-g070rb/Kconfig" endif if ARCH_BOARD_NUCLEO_G071RB source "boards/arm/stm32f0l0g0/nucleo-g071rb/Kconfig" endif if ARCH_BOARD_NUCLEO_L073RZ source "boards/arm/stm32f0l0g0/nucleo-l073rz/Kconfig" endif if ARCH_BOARD_STM32F051_DISCOVERY source "boards/arm/stm32f0l0g0/stm32f051-discovery/Kconfig" endif if ARCH_BOARD_STM32F072_DISCOVERY source "boards/arm/stm32f0l0g0/stm32f072-discovery/Kconfig" endif if ARCH_BOARD_NUCLEO_144 source "boards/arm/stm32f7/nucleo-144/Kconfig" endif if ARCH_BOARD_STM32F746_WS source "boards/arm/stm32f7/stm32f746-ws/Kconfig" endif if ARCH_BOARD_STM32F746G_DISCO source "boards/arm/stm32f7/stm32f746g-disco/Kconfig" endif if ARCH_BOARD_STM32F769I_DISCO source "boards/arm/stm32f7/stm32f769i-disco/Kconfig" endif if ARCH_BOARD_STM32H747I_DISCO source "boards/arm/stm32h7/stm32h747i-disco/Kconfig" endif if ARCH_BOARD_NUCLEO_H743ZI source "boards/arm/stm32h7/nucleo-h743zi/Kconfig" endif if ARCH_BOARD_B_L475E_IOT01A source "boards/arm/stm32l4/b-l475e-iot01a/Kconfig" endif if ARCH_BOARD_NUCLEO_L432KC source "boards/arm/stm32l4/nucleo-l432kc/Kconfig" endif if ARCH_BOARD_NUCLEO_L452RE source "boards/arm/stm32l4/nucleo-l452re/Kconfig" endif if ARCH_BOARD_NUCLEO_L476RG source "boards/arm/stm32l4/nucleo-l476rg/Kconfig" endif if ARCH_BOARD_NUCLEO_L496ZG source "boards/arm/stm32l4/nucleo-l496zg/Kconfig" endif if ARCH_BOARD_STM32L476_MDK source "boards/arm/stm32l4/stm32l476-mdk/Kconfig" endif if ARCH_BOARD_STM32L476VG_DISCO source "boards/arm/stm32l4/stm32l476vg-disco/Kconfig" endif if ARCH_BOARD_STM32L4R9AI_DISCO source "boards/arm/stm32l4/stm32l4r9ai-disco/Kconfig" endif if ARCH_BOARD_AXOLOTI source "boards/arm/stm32/axoloti/Kconfig" endif if ARCH_BOARD_CLICKER2_STM32 source "boards/arm/stm32/clicker2-stm32/Kconfig" endif if ARCH_BOARD_CLOUDCTRL source "boards/arm/stm32/cloudctrl/Kconfig" endif if ARCH_BOARD_FIRE_STM32 source "boards/arm/stm32/fire-stm32v2/Kconfig" endif if ARCH_BOARD_HYMINI_STM32V source "boards/arm/stm32/hymini-stm32v/Kconfig" endif if ARCH_BOARD_MAPLE source "boards/arm/stm32/maple/Kconfig" endif if ARCH_BOARD_MIKROE_STM32F4 source "boards/arm/stm32/mikroe-stm32f4/Kconfig" endif if ARCH_BOARD_NUCLEO_F103RB source "boards/arm/stm32/nucleo-f103rb/Kconfig" endif if ARCH_BOARD_NUCLEO_F207ZG source "boards/arm/stm32/nucleo-f207zg/Kconfig" endif if ARCH_BOARD_NUCLEO_F302R8 source "boards/arm/stm32/nucleo-f302r8/Kconfig" endif if ARCH_BOARD_NUCLEO_F303RE source "boards/arm/stm32/nucleo-f303re/Kconfig" endif if ARCH_BOARD_NUCLEO_F303ZE source "boards/arm/stm32/nucleo-f303ze/Kconfig" endif if ARCH_BOARD_NUCLEO_F334R8 source "boards/arm/stm32/nucleo-f334r8/Kconfig" endif if ARCH_BOARD_NUCLEO_F410RB source "boards/arm/stm32/nucleo-f410rb/Kconfig" endif if ARCH_BOARD_NUCLEO_F44RE source "boards/arm/stm32/nucleo-f446re/Kconfig" endif if ARCH_BOARD_NUCLEO_F401RE || ARCH_BOARD_NUCLEO_F411RE source "boards/arm/stm32/nucleo-f4x1re/Kconfig" endif if ARCH_BOARD_NUCLEO_L152RE source "boards/arm/stm32/nucleo-l152re/Kconfig" endif if ARCH_BOARD_OLIMEX_STM32E407 source "boards/arm/stm32/olimex-stm32-e407/Kconfig" endif if ARCH_BOARD_OLIMEX_STM32H405 source "boards/arm/stm32/olimex-stm32-h405/Kconfig" endif if ARCH_BOARD_OLIMEX_STM32H407 source "boards/arm/stm32/olimex-stm32-h407/Kconfig" endif if ARCH_BOARD_OLIMEX_STM32P107 source "boards/arm/stm32/olimex-stm32-p107/Kconfig" endif if ARCH_BOARD_OLIMEX_STM32P207 source "boards/arm/stm32/olimex-stm32-p207/Kconfig" endif if ARCH_BOARD_OLIMEX_STM32P407 source "boards/arm/stm32/olimex-stm32-p407/Kconfig" endif if ARCH_BOARD_OLIMEXINO_STM32 source "boards/arm/stm32/olimexino-stm32/Kconfig" endif if ARCH_BOARD_OMNIBUSF4 source "boards/arm/stm32/omnibusf4/Kconfig" endif if ARCH_BOARD_PHOTON source "boards/arm/stm32/photon/Kconfig" endif if ARCH_BOARD_SHENZHOU source "boards/arm/stm32/shenzhou/Kconfig" endif if ARCH_BOARD_STM3210E_EVAL source "boards/arm/stm32/stm3210e-eval/Kconfig" endif if ARCH_BOARD_STM3220G_EVAL source "boards/arm/stm32/stm3220g-eval/Kconfig" endif if ARCH_BOARD_STM3240G_EVAL source "boards/arm/stm32/stm3240g-eval/Kconfig" endif if ARCH_BOARD_STM32_TINY source "boards/arm/stm32/stm32_tiny/Kconfig" endif if ARCH_BOARD_STM32_BUTTERFLY2 source "boards/arm/stm32/stm32butterfly2/Kconfig" endif if ARCH_BOARD_STM32F103_MINIMUM source "boards/arm/stm32/stm32f103-minimum/Kconfig" endif if ARCH_BOARD_STM32F334_DISCO source "boards/arm/stm32/stm32f334-disco/Kconfig" endif if ARCH_BOARD_STM32F3_DISCOVERY source "boards/arm/stm32/stm32f3discovery/Kconfig" endif if ARCH_BOARD_STM32F411E_DISCO source "boards/arm/stm32/stm32f411e-disco/Kconfig" endif if ARCH_BOARD_STM32F429I_DISCO source "boards/arm/stm32/stm32f429i-disco/Kconfig" endif if ARCH_BOARD_STM32F4_DISCOVERY source "boards/arm/stm32/stm32f4discovery/Kconfig" endif if ARCH_BOARD_STM32L_DISCOVERY source "boards/arm/stm32/stm32ldiscovery/Kconfig" endif if ARCH_BOARD_STM32VL_DISCOVERY source "boards/arm/stm32/stm32vldiscovery/Kconfig" endif if ARCH_BOARD_VIEWTOOL_STM32F107 source "boards/arm/stm32/viewtool-stm32f107/Kconfig" endif if ARCH_BOARD_OLIMEX_STRP711 source "boards/arm/str71x/olimex-strp711/Kconfig" endif if ARCH_BOARD_DK_TM4C129X source "boards/arm/tiva/dk-tm4c129x/Kconfig" endif if ARCH_BOARD_EAGLE100 source "boards/arm/tiva/eagle100/Kconfig" endif if ARCH_BOARD_EKKLM3S9B96 source "boards/arm/tiva/ekk-lm3s9b96/Kconfig" endif if ARCH_BOARD_LAUNCHXL_CC1310 source "boards/arm/tiva/launchxl-cc1310/Kconfig" endif if ARCH_BOARD_LAUNCHXL_CC1312R1 source "boards/arm/tiva/launchxl-cc1312r1/Kconfig" endif if ARCH_BOARD_LM3S6432S2E source "boards/arm/tiva/lm3s6432-s2e/Kconfig" endif if ARCH_BOARD_LM3S6965EK source "boards/arm/tiva/lm3s6965-ek/Kconfig" endif if ARCH_BOARD_LM3S8962EK source "boards/arm/tiva/lm3s8962-ek/Kconfig" endif if ARCH_BOARD_LM3S8962EK source "boards/arm/tiva/lm4f120-launchpad/Kconfig" endif if ARCH_BOARD_TM4C123G_LAUNCHPAD source "boards/arm/tiva/tm4c123g-launchpad/Kconfig" endif if ARCH_BOARD_TM4C1294_LAUNCHPAD source "boards/arm/tiva/tm4c1294-launchpad/Kconfig" endif if ARCH_BOARD_LAUNCHXL_TMS57004 source "boards/arm/tms570/launchxl-tms57004/Kconfig" endif if ARCH_BOARD_TMS570LS31X_USB_KIT source "boards/arm/tms570/tms570ls31x-usb-kit/Kconfig" endif if ARCH_BOARD_XMC4500RELAX source "boards/arm/xmc4/xmc4500-relax/Kconfig" endif if ARCH_BOARD_AVR32DEV1 source "boards/avr/at32uc3/avr32dev1/Kconfig" endif if ARCH_BOARD_MICROPENDOUS3 source "boards/avr/at90usb/micropendous3/Kconfig" endif if ARCH_BOARD_TEENSY_20 source "boards/avr/at90usb/teensy-2.0/Kconfig" endif if ARCH_BOARD_AMBER source "boards/avr/atmega/amber/Kconfig" endif if ARCH_BOARD_ARDUINO_MEGA2560 source "boards/avr/atmega/arduino-mega2560/Kconfig" endif if ARCH_BOARD_MOTEINO_MEGA source "boards/avr/atmega/moteino-mega/Kconfig" endif if ARCH_BOARD_CUSTOM source "boards/dummy/Kconfig" endif if ARCH_BOARD_DEMOS92S12NEC64 source "boards/hc/m9s12/demo9s12ne64/Kconfig" endif if ARCH_BOARD_NE64BADGE source "boards/hc/m9s12/ne64badge/Kconfig" endif if ARCH_BOARD_MIRTOO source "boards/mips/pic32mx/mirtoo/Kconfig" endif if ARCH_BOARD_PIC32MX_STARTERKIT source "boards/mips/pic32mx/pic32mx-starterkit/Kconfig" endif if ARCH_BOARD_PIC32MX7MMB source "boards/mips/pic32mx/pic32mx7mmb/Kconfig" endif if ARCH_BOARD_SUREPIC32MX source "boards/mips/pic32mx/sure-pic32mx/Kconfig" endif if ARCH_BOARD_UBW32 source "boards/mips/pic32mx/ubw32/Kconfig" endif if ARCH_BOARD_FLIPNCLICK_PIC32MZ source "boards/mips/pic32mz/flipnclick-pic32mz/Kconfig" endif if ARCH_BOARD_PIC32MZ_STARTERKIT source "boards/mips/pic32mz/pic32mz-starterkit/Kconfig" endif if ARCH_BOARD_MISOC_QEMU || ARCH_BOARD_MISOC_VERILATOR source "boards/misoc/lm32/misoc/Kconfig" endif if ARCH_BOARD_OR1K source "boards/or1k/mor1kx/or1k/Kconfig" endif if ARCH_BOARD_SKP16C26 source "boards/renesas/m16c/skp16c26/Kconfig" endif if ARCH_BOARD_US7032EVB1 source "boards/renesas/sh7032/us7032evb1/Kconfig" endif if ARCH_BOARD_GAPUINO source "boards/risc-v/gap8/gapuino/Kconfig" endif if ARCH_BOARD_NR5M100_NEXYS4 source "boards/risc-v/nr5m100/nr5m100-nexys4/Kconfig" endif if ARCH_BOARD_HIFIVE_REVB source "boards/risc-v/fe310/hifive1-revb/Kconfig" endif if ARCH_BOARD_MAIX_BIT source "boards/risc-v/k210/maix-bit/Kconfig" endif if ARCH_BOARD_SIM source "boards/sim/sim/sim/Kconfig" endif if ARCH_BOARD_QEMU_I486 source "boards/x86/qemu/qemu-i486/Kconfig" endif if ARCH_BOARD_RX65N source "boards/renesas/rx65n/rx65n/Kconfig" endif if ARCH_BOARD_RX65N_RSK1MB source "boards/renesas/rx65n/rx65n-rsk1mb/Kconfig" endif if ARCH_BOARD_RX65N_RSK2MB source "boards/renesas/rx65n/rx65n-rsk2mb/Kconfig" endif if ARCH_BOARD_RX65N_GRROSE source "boards/renesas/rx65n/rx65n-grrose/Kconfig" endif if ARCH_BOARD_ESP32CORE source "boards/xtensa/esp32/esp32-core/Kconfig" endif if ARCH_BOARD_Z16F2800100ZCOG source "boards/z16/z16f2811/z16f2800100zcog/Kconfig" endif if ARCH_BOARD_EZ80F910200KITG source "boards/z80/ez80/ez80f910200kitg/Kconfig" endif if ARCH_BOARD_EZ80F910200ZCO source "boards/z80/ez80/ez80f910200zco/Kconfig" endif if ARCH_BOARD_MAKERLISP source "boards/z80/ez80/makerlisp/Kconfig" endif if ARCH_BOARD_P112 source "boards/z80/z180/p112/Kconfig" endif if ARCH_BOARD_Z8ENCORE000ZCO source "boards/z80/z8/z8encore000zco/Kconfig" endif if ARCH_BOARD_Z8F64200100KIT source "boards/z80/z8/z8f64200100kit/Kconfig" endif if ARCH_BOARD_Z80SIM source "boards/z80/z80/z80sim/Kconfig" endif config BOARD_CRASHDUMP bool "Enable Board level logging of crash dumps" default n ---help--- If selected up_assert will call out to board_crashdump, in the case of an assertion failure, prior to calling exit. Or in the case of a hardfault prior to looping indefinitely. board_crashdump then has a chance to save the state of the machine. The purpose of board_crashdump is to save as much information as it can about the cause of the fault and then most likely reset the system. N.B. There is limited system resources that can be used, who knows what memory is trashed? So all we can expect to do is save the "machine state" in a place where on the next reset can write it to more sophisticated storage in a sane operating environment. config BOARD_ENTROPY_POOL bool "Enable Board level storing of entropy pool structure" default n depends on CRYPTO_RANDOM_POOL ---help--- Entropy pool structure can be provided by board source. Use for this is, for example, to allocate entropy pool from special area of RAM which content is kept over system reset. config BOARD_INITRNGSEED bool "Enable Board level initial seeding of entropy pool RNG" default n depends on CRYPTO_RANDOM_POOL ---help--- If enabled, entropy pool random number generator will call board_init_rndseed() upon initialization. This function can then provide early entropy seed to the pool through entropy injection APIs provided at 'nuttx/random.h'. #endif config LIB_BOARDCTL bool "Enable boardctl() interface" default n ---help--- Enables support for the boardctl() interface. Architecture specific logic must provide board_app_initialize() interface. if LIB_BOARDCTL config BOARDCTL_FINALINIT bool "Enable board app final init" default n ---help--- Enables support for the BOARDIOC_FINALINIT boardctl() command. Architecture specific logic must provide board_app_finalinitialize() interface. config BOARDCTL_POWEROFF bool "Enable power off interfaces" default n depends on ARCH_HAVE_POWEROFF ---help--- Enables support for the BOARDIOC_POWEROFF boardctl() command. Architecture specific logic must provide the board_power_off() interface. config BOARDCTL_RESET bool "Enable reset interfaces" default n depends on ARCH_HAVE_RESET ---help--- Enables support for the BOARDIOC_RESET boardctl() command. Architecture specific logic must provide the board_reset() interface. config BOARD_RESET_ON_ASSERT int "Enable Board Reset after assert" default 0 depends on BOARDCTL_RESET ---help--- == 0 up_assert never reset the machine >= 1 up_assert from interrupt handler or IDLE thread will reset the machine >= 2 up_assert from user or kernel thread will reset the machine. The default behavior is just to kill the asserting thread. config BOARD_ASSERT_RESET_VALUE int "Board reset argument" default 0 depends on BOARDCTL_RESET ---help--- Parameter that will be passed to board_reset() by when an assertion occurs. This may be used by board_reset() implementations to handle the reset differently for the case of a crash. config BOARDCTL_UNIQUEID bool "Return board unique ID" default n ---help--- Enables support for the BOARDIOC_UNIQUEID boardctl() command. Architecture specific logic must provide the board_uniqueid() interface. config BOARDCTL_UNIQUEID_SIZE int "Size of the board unique ID (bytes)" default 16 depends on BOARDCTL_UNIQUEID ---help--- Provides the size of the memory buffer that must be provided by the caller of board_uniqueid() in which to receive the board unique ID. config BOARDCTL_MKRD bool "Enable application space creation of RAM disks" default n select DRVR_MKRD depends on !DISABLE_MOUNTPOINT ---help--- Enables support for the BOARDIOC_MKRD boardctl() command. config BOARDCTL_ROMDISK bool "Enable application space creation of ROM disks" default n depends on !DISABLE_MOUNTPOINT ---help--- Enables support for the BOARDIOC_MKRD boardctl() command. config BOARDCTL_APP_SYMTAB bool "Enable application symbol table interfaces" default n ---help--- Enables support for the BOARDIOC_APP_SYMTAB boardctl() command. config BOARDCTL_OS_SYMTAB bool "Enable kernel module symbol table interfaces" default n depends on MODULE ---help--- Enables support for the BOARDIOC_OS_SYMTAB boardctl() command. config BOARDCTL_USBDEVCTRL bool "Enable USB device controls" default n depends on USBDEV ---help--- Enables support for the BOARDIOC_USBDEV_CONTROL boardctl() command. config BOARDCTL_TESTSET bool "Architecture-specific test/set operation" default n ---help--- Enables support for the BOARDIOC_SPINLOCK boardctl() command. Architecture specific logic must provide up_testset() interface. config BOARDCTL_IOCTL bool "Board-specific boardctl() commands" default n ---help--- Enables support for board-specific boardctl() commands. Architecture specific logic must provide board_ioctl() interface. endif # LIB_BOARDCTL