/**************************************************************************** * drivers/sensors/lis3dh.c * * Copyright (C) 2018 Extent3D. All rights reserved. * Author: Matt Thompson * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #if defined(CONFIG_SPI) && defined(CONFIG_LIS3DH) /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define LIS3DH_QUEUE_MAX 32 #define LIS3DH_FIFOBUF_SIZE ((32 * 6) + 1) /**************************************************************************** * Private Types ****************************************************************************/ struct lis3dh_dev_s { FAR struct lis3dh_config_s *config; /* Driver configuration */ FAR struct spi_dev_s *spi; /* Pointer to the SPI instance */ struct work_s work; /* Work Queue */ uint8_t power_mode; /* The power mode used to determine mg/digit */ uint8_t odr; /* The current output data rate */ sem_t readsem; /* Read notification semaphore */ uint8_t fifobuf[LIS3DH_FIFOBUF_SIZE]; /* Raw FIFO buffer */ struct lis3dh_sensor_data_s queue[LIS3DH_QUEUE_MAX]; sem_t queuesem; /* Queue exclusive lock */ uint8_t queue_rpos; /* Queue read position */ uint8_t queue_wpos; /* Queue write position */ uint8_t queue_count; /* Number of elements in the queue */ }; struct lis3dh_sample_s { int16_t x; int16_t y; int16_t z; }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static void lis3dh_read_register(FAR struct lis3dh_dev_s *dev, uint8_t const reg_addr, uint8_t *reg_data); static void lis3dh_write_register(FAR struct lis3dh_dev_s *dev, uint8_t const reg_addr, uint8_t const reg_data); static void lis3dh_reset(FAR struct lis3dh_dev_s *dev); static int lis3dh_ident(FAR struct lis3dh_dev_s *dev); static int lis3dh_read_fifo(FAR struct lis3dh_dev_s *dev); static int lis3dh_interrupt_handler(int irq, FAR void *context, FAR void *arg); static void lis3dh_worker(FAR void *arg); static int lis3dh_irq_enable(FAR struct lis3dh_dev_s *dev, bool enable); static int lis3dh_fifo_enable(FAR struct lis3dh_dev_s *dev); static int lis3dh_open(FAR struct file *filep); static int lis3dh_close(FAR struct file *filep); static ssize_t lis3dh_read(FAR struct file *, FAR char *buffer, size_t buflen); static ssize_t lis3dh_write(FAR struct file *filep, FAR const char *buffer, size_t buflen); static int lis3dh_ioctl(FAR struct file *filep, int cmd, unsigned long arg); /**************************************************************************** * Private Data ****************************************************************************/ static const struct file_operations g_lis3dh_fops = { lis3dh_open, lis3dh_close, lis3dh_read, lis3dh_write, NULL, lis3dh_ioctl, NULL #ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS , NULL #endif }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: lis3dh_read_register * * Description: * Read a single register from the LIS3DH sensor. * * Input Parameters: * dev - Pointer to device driver instance * reg_addr - LIS3DH register address * reg_data - Pointer to uint8_t where read value will be stored * ****************************************************************************/ static void lis3dh_read_register(FAR struct lis3dh_dev_s *dev, uint8_t const reg_addr, uint8_t * reg_data) { uint8_t buffer[2]; /* Lock the SPI bus so that only one device can access it at the same time */ SPI_LOCK(dev->spi, true); /* Set CS to low which selects the LIS3DH */ SPI_SELECT(dev->spi, dev->config->spi_devid, true); buffer[0] = reg_addr | 0x80; buffer[1] = 0; SPI_EXCHANGE(dev->spi, buffer, buffer, 2); *reg_data = buffer[1]; /* Set CS to high which deselects the LIS3DH */ SPI_SELECT(dev->spi, dev->config->spi_devid, false); /* Unlock the SPI bus */ SPI_LOCK(dev->spi, false); } /**************************************************************************** * Name: lis3dh_write_register * * Description: * Write a single register to the LIS3DH sensor. * * Input Parameters: * dev - Pointer to device driver instance * reg_addr - LIS3DH register address * reg_data - Value to write into the specified register address * ****************************************************************************/ static void lis3dh_write_register(FAR struct lis3dh_dev_s *dev, uint8_t const reg_addr, uint8_t const reg_data) { uint8_t buffer[2]; /* Lock the SPI bus so that only one device can access it at the same time */ SPI_LOCK(dev->spi, true); /* Set CS to low which selects the LIS3DH */ SPI_SELECT(dev->spi, dev->config->spi_devid, true); buffer[0] = reg_addr; buffer[1] = reg_data; SPI_EXCHANGE(dev->spi, buffer, buffer, 2); /* Set CS to high which deselects the LIS3DH */ SPI_SELECT(dev->spi, dev->config->spi_devid, false); /* Unlock the SPI bus */ SPI_LOCK(dev->spi, false); } /**************************************************************************** * Name: lis3dh_reset * * Description: * Perform a software reset of the LIS3DH sensor. * * Input Parameters: * dev - Pointer to device driver instance * ****************************************************************************/ static void lis3dh_reset(FAR struct lis3dh_dev_s *dev) { lis3dh_write_register(dev, LIS3DH_CTRL_REG5, LIS3DH_CTRL_REG5_BOOT); up_mdelay(100); } /**************************************************************************** * Name: lis3dh_ident * * Description: * Identify an LIS3DH sensor on the SPI bus using the WHO_AM_I register. * * Input Parameters: * dev - Pointer to device driver instance * * Returned Value: * OK if the device responded with the correct ID * -ENODEV if the device did not respond with the correct ID * ****************************************************************************/ static int lis3dh_ident(FAR struct lis3dh_dev_s *dev) { uint8_t reg; lis3dh_read_register(dev, LIS3DH_WHO_AM_I, ®); if (reg == LIS3DH_DEVICE_ID) { return OK; } return -ENODEV; } /**************************************************************************** * Name: lis3dh_queue_lock * * Description: * Locks exclusive access to the ring buffer queue * * Input Parameters: * dev - Pointer to device driver instance * ****************************************************************************/ static void lis3dh_queue_lock(FAR struct lis3dh_dev_s *dev) { int ret; ret = nxsem_wait(&dev->queuesem); if (ret < 0) { snerr("ERROR: queuesem wait error: %d\n", ret); return; } } /**************************************************************************** * Name: lis3dh_queue_unlock * * Description: * Unlocks exclusive acccess to the ring buffer queue * * Input Parameters: * dev - Pointer to device driver instance * ****************************************************************************/ static void lis3dh_queue_unlock(FAR struct lis3dh_dev_s *dev) { nxsem_post(&dev->queuesem); } /**************************************************************************** * Name: lis3dh_queue_push * * Description: * Push a sensor measurement into the queue * * Input Parameters: * dev - Pointer to device driver instance * ****************************************************************************/ static int lis3dh_queue_push(FAR struct lis3dh_dev_s *dev, struct lis3dh_sensor_data_s *data) { lis3dh_queue_lock(dev); if (dev->queue_count >= LIS3DH_QUEUE_MAX) { lis3dh_queue_unlock(dev); return -ENOMEM; } dev->queue_wpos++; dev->queue[dev->queue_wpos % LIS3DH_QUEUE_MAX] = *data; dev->queue_count++; lis3dh_queue_unlock(dev); return OK; } /**************************************************************************** * Name: lis3dh_queue_pop * * Description: * Pops a sensor measurement from the queue * * Input Parameters: * dev - Pointer to device driver instance * * Returned Value: * OK if a measurement was successfully dequeued * -EAGAIN if the queue is empty * ****************************************************************************/ static int lis3dh_queue_pop(FAR struct lis3dh_dev_s *dev, struct lis3dh_sensor_data_s *data) { lis3dh_queue_lock(dev); if (dev->queue_count == 0) { lis3dh_queue_unlock(dev); return -EAGAIN; } dev->queue_rpos++; *data = dev->queue[dev->queue_rpos % LIS3DH_QUEUE_MAX]; dev->queue_count--; lis3dh_queue_unlock(dev); return OK; } /**************************************************************************** * Name: lis3dh_read_fifo * * Description: * Reads the FIFO from the LIS3DH sensor, and pushes to the internal queue. * * Input Parameters: * dev - Pointer to device driver instance * * Returned Value: * ****************************************************************************/ static int lis3dh_read_fifo(FAR struct lis3dh_dev_s *dev) { uint8_t fifosrc; uint8_t count; int i; /* Lock the SPI bus */ SPI_LOCK(dev->spi, true); /* Read the FIFO source register */ dev->fifobuf[0] = LIS3DH_FIFO_SRC_REG | 0x80; dev->fifobuf[1] = 0; SPI_SELECT(dev->spi, dev->config->spi_devid, true); SPI_EXCHANGE(dev->spi, dev->fifobuf, dev->fifobuf, 2); SPI_SELECT(dev->spi, dev->config->spi_devid, false); fifosrc = dev->fifobuf[1]; count = fifosrc & 0x1f; if (fifosrc & LIS3DH_FIFO_SRC_REG_OVRN_FIFO) { snerr("FIFO overrun\n"); } memset(dev->fifobuf, 0, LIS3DH_FIFOBUF_SIZE); dev->fifobuf[0] = LIS3DH_OUT_X_L | 0xc0; SPI_SELECT(dev->spi, dev->config->spi_devid, true); SPI_EXCHANGE(dev->spi, dev->fifobuf, dev->fifobuf, 1 + count * 6); SPI_SELECT(dev->spi, dev->config->spi_devid, false); /* Unlock the SPI bus */ SPI_LOCK(dev->spi, false); for (i = 0; i < count; i++) { struct lis3dh_sensor_data_s data; uint16_t x_raw; uint16_t y_raw; uint16_t z_raw; int16_t x_acc; int16_t y_acc; int16_t z_acc; x_raw = (uint16_t)dev->fifobuf[(i * 6) + 1] | (uint16_t)dev->fifobuf[(i * 6) + 2] << 8; y_raw = (uint16_t)dev->fifobuf[(i * 6) + 3] | (uint16_t)dev->fifobuf[(i * 6) + 4] << 8; z_raw = (uint16_t)dev->fifobuf[(i * 6) + 5] | (uint16_t)dev->fifobuf[(i * 6) + 6] << 8; /* The sensor left justifies the data in the register, so we must * shift it to the right depending on the selected power mode */ switch (dev->power_mode) { case LIS3DH_POWER_LOW: /* 8 bit measurements */ x_acc = (int16_t)x_raw >> 8; y_acc = (int16_t)y_raw >> 8; z_acc = (int16_t)z_raw >> 8; data.x_acc = (float)x_acc * 0.016; data.y_acc = (float)y_acc * 0.016; data.z_acc = (float)z_acc * 0.016; break; case LIS3DH_POWER_NORMAL: /* 10 bit measurements */ x_acc = (int16_t)x_raw >> 6; y_acc = (int16_t)y_raw >> 6; z_acc = (int16_t)z_raw >> 6; data.x_acc = (float)x_acc * 0.004; data.y_acc = (float)y_acc * 0.004; data.z_acc = (float)z_acc * 0.004; break; case LIS3DH_POWER_HIGH: /* 12 bit measurements */ x_acc = (int16_t)x_raw >> 4; y_acc = (int16_t)y_raw >> 4; z_acc = (int16_t)z_raw >> 4; data.x_acc = (float)x_acc * 0.001; data.y_acc = (float)y_acc * 0.001; data.z_acc = (float)z_acc * 0.001; break; default: snerr("Unknown power mode\n"); return -EINVAL; } if (lis3dh_queue_push(dev, &data) == OK) { nxsem_post(&dev->readsem); } } return OK; } /**************************************************************************** * Name: lis3dh_interrupt_handler * * Description: * Interrupt service routine, queues work on high priority work queue. * * Input Parameters: * irq - Interrupt request number * context - Context pointer * arg - Pointer to device driver instance * * Returned Value: * Returns OK to indicate the interrupt has been serviced. * ****************************************************************************/ static int lis3dh_interrupt_handler(int irq, FAR void *context, FAR void *arg) { /* The interrupt handler is called when the FIFO watermark is reached */ FAR struct lis3dh_dev_s *priv = (FAR struct lis3dh_dev_s *)arg; int ret; DEBUGASSERT(priv != NULL); if (work_available(&priv->work)) { ret = work_queue(HPWORK, &priv->work, lis3dh_worker, priv, 0); if (ret < 0) { snerr("ERROR: Failed to queue work: %d\n", ret); return ret; } } return OK; } /**************************************************************************** * Name: lis3dh_worker * * Description: * Worker callback executed from high priority work queue. * Performs reading the FIFO from the sensor and pushing samples to * the internal device driver queue. * * Input Parameters: * arg - Pointer to device driver instance * ****************************************************************************/ static void lis3dh_worker(FAR void *arg) { FAR struct lis3dh_dev_s *priv = (FAR struct lis3dh_dev_s *)(arg); DEBUGASSERT(priv != NULL); /* Read the FIFO and fill the queue */ lis3dh_read_fifo(priv); } /**************************************************************************** * Name: lis3dh_set_power_mode * * Description: * Sets the power mode of the sensor. * * Input Parameters: * dev - Pointer to device driver instance * power_mode - LIS3DH_POWER_* * * Returned Value: * OK - Power mode was set successfully * -EINVAL - Invalid power mode argument * ****************************************************************************/ static int lis3dh_set_power_mode(FAR struct lis3dh_dev_s *dev, uint8_t power_mode) { uint8_t ctrl1; uint8_t ctrl4; switch (power_mode) { case LIS3DH_POWER_LOW: lis3dh_read_register(dev, LIS3DH_CTRL_REG1, &ctrl1); lis3dh_read_register(dev, LIS3DH_CTRL_REG4, &ctrl4); ctrl1 |= LIS3DH_CTRL_REG1_LPEN; ctrl4 &= ~LIS3DH_CTRL_REG4_HR; lis3dh_write_register(dev, LIS3DH_CTRL_REG1, ctrl1); lis3dh_write_register(dev, LIS3DH_CTRL_REG4, ctrl4); break; case LIS3DH_POWER_NORMAL: lis3dh_read_register(dev, LIS3DH_CTRL_REG1, &ctrl1); lis3dh_read_register(dev, LIS3DH_CTRL_REG4, &ctrl4); ctrl1 &= ~LIS3DH_CTRL_REG1_LPEN; ctrl4 &= ~LIS3DH_CTRL_REG4_HR; lis3dh_write_register(dev, LIS3DH_CTRL_REG1, ctrl1); lis3dh_write_register(dev, LIS3DH_CTRL_REG4, ctrl4); break; case LIS3DH_POWER_HIGH: lis3dh_read_register(dev, LIS3DH_CTRL_REG1, &ctrl1); lis3dh_read_register(dev, LIS3DH_CTRL_REG4, &ctrl4); ctrl1 &= ~LIS3DH_CTRL_REG1_LPEN; ctrl4 |= LIS3DH_CTRL_REG4_HR; lis3dh_write_register(dev, LIS3DH_CTRL_REG1, ctrl1); lis3dh_write_register(dev, LIS3DH_CTRL_REG4, ctrl4); break; default: return -EINVAL; break; } dev->power_mode = power_mode; sninfo("Power mode set to %d\n", power_mode); return OK; } /**************************************************************************** * Name: lis3dh_set_odr * * Description: * Sets the output data rate of the sensor. * * Input Parameters: * dev - Pointer to device driver instance * odr - LIS3DH_ODR_* * * Returned Value: * OK - Power mode was set successfully * -EINVAL - Invalid odr argument * ****************************************************************************/ static int lis3dh_set_odr(FAR struct lis3dh_dev_s *dev, uint8_t odr) { uint8_t ctrl1; if (odr > LIS3DH_CTRL_REG1_ODR_LP_5376HZ) { return -EINVAL; } lis3dh_read_register(dev, LIS3DH_CTRL_REG1, &ctrl1); ctrl1 |= LIS3DH_CTRL_REG1_ODR(odr) & LIS3DH_CTRL_REG1_ODR_MASK; lis3dh_write_register(dev, LIS3DH_CTRL_REG1, ctrl1); /* Cache the current ODR in the device structure */ dev->odr = odr; sninfo("Output data rate set to %d\n", odr); return OK; } /**************************************************************************** * Name: lis3dh_irq_enable * * Description: * Enable or disable sensor interrupt generation on FIFO watermark. * * Input Parameters: * dev - Pointer to device driver instance * enable - Boolean to enable or disable the interrupt generation * * Returned Value: * OK - Interrupt generation register written. * ****************************************************************************/ static int lis3dh_irq_enable(FAR struct lis3dh_dev_s *dev, bool enable) { uint8_t reg; reg = 0; if (enable == true) { reg = LIS3DH_CTRL_REG3_I1_WTM; } lis3dh_write_register(dev, LIS3DH_CTRL_REG3, reg); return OK; } /**************************************************************************** * Name: lis3dh_irq_enable * * Description: * Enable or disable sensor interrupt generation on FIFO watermark. * * Input Parameters: * dev - Pointer to device driver instance * enable - Boolean to enable or disable the interrupt generation * * Returned Value: * OK - Interrupt generation register written. * ****************************************************************************/ static int lis3dh_fifo_enable(FAR struct lis3dh_dev_s *dev) { uint8_t reg; lis3dh_write_register(dev, LIS3DH_FIFO_CTRL_REG, LIS3DH_FIFO_CTRL_REG_MODE_STREAM | 28); lis3dh_read_register(dev, LIS3DH_CTRL_REG5, ®); reg |= LIS3DH_CTRL_REG5_FIFO_EN; lis3dh_write_register(dev, LIS3DH_CTRL_REG5, reg); return OK; } /**************************************************************************** * Name: lis3dh_enable * * Description: * Enable sensor measurements into the on-chip FIFO. * * Input Parameters: * priv - Pointer to device driver instance * * Returned Value: * OK - Sensor measurements enabled. * ****************************************************************************/ static int lis3dh_enable(FAR struct lis3dh_dev_s *priv) { uint8_t reg; /* Select the default power mode */ lis3dh_set_power_mode(priv, LIS3DH_POWER_NORMAL); /* Select the default output data rate */ lis3dh_set_odr(priv, LIS3DH_ODR_1344HZ); reg = LIS3DH_CTRL_REG4_BDU | LIS3DH_CTRL_REG4_FS_2G; lis3dh_write_register(priv, LIS3DH_CTRL_REG4, reg); lis3dh_fifo_enable(priv); /* Enable X, Y, and Z axes */ lis3dh_read_register(priv, LIS3DH_CTRL_REG1, ®); reg |= LIS3DH_CTRL_REG1_ZEN | LIS3DH_CTRL_REG1_YEN | LIS3DH_CTRL_REG1_XEN; lis3dh_write_register(priv, LIS3DH_CTRL_REG1, reg); return OK; } /**************************************************************************** * Name: lis3dh_open * * Description: * Character device open call. * * Input Parameters: * filep - Pointer to struct file * * Returned Value: * -ENODEV - Device was not identified on the SPI bus. * OK - Sensor device was opened successfully. * ****************************************************************************/ static int lis3dh_open(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct lis3dh_dev_s *priv = inode->i_private; DEBUGASSERT(priv != NULL); /* Perform a reset */ lis3dh_reset(priv); if (lis3dh_ident(priv) < 0) { snerr("ERROR: Failed to identify LIS3DH on SPI bus\n"); return -ENODEV; } /* Attach the interrupt line */ (priv->config->irq_attach)(priv->config, lis3dh_interrupt_handler, priv); /* Enable interrupt generation on the sensor */ lis3dh_irq_enable(priv, true); /* Enable measurements on the sensor */ if (lis3dh_enable(priv) < 0) { snerr("ERROR: Failed to enable LIS3DH\n"); return -ENODEV; } return OK; } /**************************************************************************** * Name: lis3dh_close * * Description: * Character device close call. * * Input Parameters: * filep - Pointer to struct file * * Returned Value: * OK - Sensor device was closed successfully. * ****************************************************************************/ static int lis3dh_close(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct lis3dh_dev_s *priv = inode->i_private; DEBUGASSERT(priv != NULL); /* Perform a reset */ lis3dh_reset(priv); /* Detach the interrupt line */ (priv->config->irq_detach)(priv->config); return OK; } /**************************************************************************** * Name: lis3dh_read * * Description: * Character device read call. Blocks until requested buffer size is full. * * Input Parameters: * filep - Pointer to struct file * buffer - Pointer to user buffer * buflen - Size of user buffer in bytes * * Returned Value: * Returns the number of bytes written to the buffer. * -EINVAL - Supplied buffer length invalid * ****************************************************************************/ static ssize_t lis3dh_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { FAR struct inode *inode = filep->f_inode; FAR struct lis3dh_dev_s *priv = inode->i_private; FAR struct lis3dh_sensor_data_s *data; int count; int remain; DEBUGASSERT(priv != NULL); if ((buflen % sizeof(FAR struct lis3dh_sensor_data_s)) != 0) { snerr("ERROR: Provided buffer must be multiple of sensor data size\n"); return -EINVAL; } /* Get the number of samples the user has requested */ count = buflen / sizeof(struct lis3dh_sensor_data_s); /* Cast a pointer into the user buffer */ data = (FAR struct lis3dh_sensor_data_s *)buffer; for (remain = count; remain > 0; remain--) { /* Wait for data to be available in the queue */ nxsem_wait(&priv->readsem); /* Pop a sample off of the queue */ lis3dh_queue_pop(priv, data); data++; } return count * sizeof(struct lis3dh_sensor_data_s); } /**************************************************************************** * Name: lis3dh_write * * Description: * Character device write call. Not supported. * * Input Parameters: * filep - Pointer to struct file * buffer - Pointer to user buffer * buflen - Size of user buffer in bytes * * Returned Value: * -ENOSYS * ****************************************************************************/ static ssize_t lis3dh_write(FAR struct file *filep, FAR const char *buffer, size_t buflen) { return -ENOSYS; } /**************************************************************************** * Name: lis3dh_ioctl * * Description: * Character device ioctl call. Sets device parameters. * * Input Parameters: * filep - Pointer to struct file * cmd - SNIOC_* * arg - ioctl specific argument * * Returned Value: * OK - The command was executed successfully. * -ENOTTY - The request command is not applicable to the driver. * ****************************************************************************/ static int lis3dh_ioctl(FAR struct file *filep, int cmd, unsigned long arg) { FAR struct inode *inode = filep->f_inode; FAR struct lis3dh_dev_s *priv = inode->i_private; int ret = OK; switch (cmd) { case SNIOC_SET_POWER_MODE: ret = lis3dh_set_power_mode(priv, arg); break; case SNIOC_SET_DATA_RATE: ret = lis3dh_set_odr(priv, arg); break; default: snerr("ERROR: Unrecognized cmd: %d\n", cmd); ret = -ENOTTY; break; } return ret; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: lis3dh_register * * Description: * Register the LIS3DH character device at the specified device path * * Input Parameters: * devpath - Full path of device node to register ie "/dev/accel0" * spi - SPI bus device instance * config - Driver instance configuration structure * * Returned Value: * OK on success or a negative errno value on failure. * ****************************************************************************/ int lis3dh_register(FAR const char *devpath, FAR struct spi_dev_s *spi, FAR struct lis3dh_config_s *config) { FAR struct lis3dh_dev_s *priv; int ret; DEBUGASSERT(spi != NULL); /* Initialize the LIS3DH device structure */ priv = (FAR struct lis3dh_dev_s *)kmm_malloc(sizeof(struct lis3dh_dev_s)); if (priv == NULL) { snerr("ERROR: Failed to allocate instance\n"); return -ENOMEM; } priv->config = config; priv->spi = spi; priv->work.worker = NULL; priv->queue_count = 0; /* Initialize queue semaphore */ nxsem_init(&priv->queuesem, 0, 1); /* Initialize read notification semaphore */ nxsem_init(&priv->readsem, 0, 0); nxsem_setprotocol(&priv->readsem, SEM_PRIO_NONE); /* Setup SPI frequency and mode */ SPI_SETFREQUENCY(spi, LIS3DH_SPI_FREQUENCY); SPI_SETMODE(spi, LIS3DH_SPI_MODE); /* Register the character driver */ ret = register_driver(devpath, &g_lis3dh_fops, 0666, priv); if (ret < 0) { snerr("ERROR: Failed to register driver: %d\n", ret); kmm_free(priv); nxsem_destroy(&priv->queuesem); nxsem_destroy(&priv->readsem); return ret; } return OK; } #endif /* CONFIG_SPI && CONFIG_LIS3DH */