/**************************************************************************************
* drivers/lcd/st7565.h
*
* Definitions for the ST7565 128x64 Dot Matrix LCD
* Driver with C
*
* Copyright (C) 2014 Pierre-noel Bouteville. All rights reserved.
* Author: Pierre-noel Boutevlle <pnb990@gmail.com>
*
* Based on drivers/lcd/st7567.h
* Copyright (C) 2013 Zilogic Systems. All rights reserved.
* Author: Manikandan <code@zilogic.com>
*
* Based on drivers/lcd/ssd1305.h
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References: SSD1305.pdf, "Solomon Systech SSD1305 136x64 Dot Matrix OLED/PLED
* Segment/Common Driver with Controller," Solomon Systech Limited,
* http://www.solomon-systech.com, May, 2008.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
**************************************************************************************/
#ifndef __DRIVERS_LCD_ST7565_H
#define __DRIVERS_LCD_ST7565_H
/**************************************************************************************
* Included Files
**************************************************************************************/
/**************************************************************************************
* Pre-processor Definitions
**************************************************************************************/
/* Fundamental Commands ***************************************************************/
#define ST7565_DISPOFF 0xae /* 0xae: Display OFF (sleep mode) */
#define ST7565_DISPON 0xaf /* 0xaf: Display ON in normal mode */
#define ST7565_SETSTARTLINE 0x40 /* 0x40-7f: Set display start line */
# define ST7565_STARTLINE_MASK 0x3f
#define ST7565_SETPAGESTART 0xb0 /* 0xb0-b7: Set page start address */
# define ST7565_PAGESTART_MASK 0x0f
#define ST7565_SETCOLL 0x00 /* 0x00-0x0f: Set lower column address */
# define ST7565_COLL_MASK 0x0f
#define ST7565_SETCOLH 0x10 /* 0x10-0x1f: Set higher column address */
# define ST7565_COLH_MASK 0x0f
#define ST7565_ADCNORMAL 0xa0 /* 0xa6: ADC Normal */
#define ST7565_ADCINVERSE 0xa1 /* 0xa7: ADC Inverse */
#define ST7565_DISPNORMAL 0xa6 /* 0xa6: Normal display */
#define ST7565_DISPINVERSE 0xa7 /* 0xa7: Inverse display */
#define ST7565_DISPRAM 0xa4 /* 0xa4: Resume to RAM content display */
#define ST7565_DISPENTIRE 0xa5 /* 0xa5: Entire display ON */
#define ST7565_BIAS_1_9 0xa2 /* 0xa2: Select BIAS setting 1/9 */
#define ST7565_BIAS_1_7 0xa3 /* 0xa3: Select BIAS setting 1/7 */
#define ST7565_ENTER_RMWMODE 0xe0 /* 0xe0: Enter the Read Modify Write mode */
#define ST7565_EXIT_RMWMODE 0xee /* 0xee: Leave the Read Modify Write mode */
#define ST7565_EXIT_SOFTRST 0xe2 /* 0xe2: Software RESET */
#define ST7565_SETCOMNORMAL 0xc0 /* 0xc0: Set COM output direction, normal mode */
#define ST7565_SETCOMREVERSE 0xc8 /* 0xc8: Set COM output direction, reverse mode */
#define ST7565_POWERCTRL_EXT 0x28 /* 0x28: Only the external power supply is used */
#define ST7565_POWERCTRL_VF 0x29 /* 0x29: Only the V/F circuit is used */
#define ST7565_POWERCTRL_VR 0x2b /* 0x2b: Only the voltage regulator circuit and the
* voltage follower circuit are used
*/
#define ST7565_POWERCTRL_INT 0x2f /* 0x2f: Only the internal power supply is used */
/* Regulation Resistior ratio V0 = (1+Rb/Ra)*Vev */
#define ST7565_REG_RES_3_0 0x20 /* (Ra/Rb = 3.0) */
#define ST7565_REG_RES_3_5 0x21 /* (Ra/Rb = 5.5) */
#define ST7565_REG_RES_4_0 0x22 /* (Ra/Rb = 4.0) */
#define ST7565_REG_RES_4_5 0x23 /* (Ra/Rb = 4.5) */
#define ST7565_REG_RES_5_0 0x24 /* (Ra/Rb = 5.0) */
#define ST7565_REG_RES_5_5 0x25 /* (Ra/Rb = 5.5) */
#define ST7565_REG_RES_6_0 0x26 /* (Ra/Rb = 6.0) */
#define ST7565_REG_RES_6_5 0x27 /* (Ra/Rb = 6.5) */
/* Set Electronic volume mode */
#define ST7565_SETEVMODE 0x81 /* 0x81: Set contrast control */
/* Set Ev value register
* ratio Vev = (1-a/162)*Vreg, Vreg = 2.1V
*/
#define ST7565_SETEVREG(x) (0x0 | ((x) & 0x3F))
/* Set booster ratio */
#define ST7565_MODE_NORMAL 0xac /* Set Normal Mode */
#define ST7565_MODE_SLEEP 0xad /* Set Sleep Mode */
/* Set booster ratio */
#define ST7565_SETBOOSTER 0xf8
#define ST7565_SETBOOSTER4X 0x00 /* x2, x3, x4 */
#define ST7565_SETBOOSTER5X 0x01 /* x5 */
#define ST7565_SETBOOSTER6X 0x02 /* x6 */
#define ST7565_NOP 0xe3 /* 0xe3: NOP Command for no operation */
/**************************************************************************************
* Public Data
**************************************************************************************/
#endif /* __DRIVERS_LCD_ST7565_H */