=========== Board IOCTL =========== In a small embedded system, there will typically be a much greater interaction between application and low-level board features. The canonically correct to implement such interactions is by implementing a character driver and performing the interactions via low level ``ioctl()`` calls. This, however, may not be practical in many cases and will lead to "correct" but awkward implementations. :c:func:`boardctl` is non-standard OS interface to alleviate the problem. It basically circumvents the normal device driver ``ioctl()`` interface and allows the application to perform direct IOCTL-like calls to the board-specific logic. It is especially useful for setting up board operational and test configurations. :c:func:`boardctl` is an application interface to the OS. There is no point, in fact, of using :c:func:`boardctl` within the OS; the board interfaces prototyped in :file:`include/nuttx/board.h` may be called directly from within the OS. .. c:function:: int boardctl(unsigned int cmd, uintptr_t arg) :param cmd: Identifies the board command to be executed. See :file:`include/sys/boardctl.h` for the complete list of common board commands. Provisions are made to support non-common, board-specific commands as well. :param arg: The argument that accompanies the command. The nature of the argument is determined by the specific command. :return: On success zero (OK) is returned; -1 (ERROR) is returned on failure with the errno variable set to indicate the nature of the failure. Supported commands ================== The following is the list of supported :c:func:`boardctl` commands. Besides this list, board logic can implement handling of custom commands by implementing the :c:func:`board_ioctl` interface. System state control -------------------- .. c:macro:: BOARDIOC_INIT Perform one-time application initialization. :Argument: The argument is passed to the :c:func:`board_app_initialize` implementation without modification. The argument has no meaning to NuttX; the meaning of the argument is a contract between the board-specific initialization logic and the matching application logic. The value could be such things as a mode enumeration value, a set of DIP switch switch settings, a pointer to configuration data read from a file or serial FLASH, or whatever you would like to do with it. Every implementation should accept zero/NULL as a default configuration. :Dependencies: Board logic must provide :c:func:`board_app_initialize`. .. c:macro:: BOARDIOC_POWEROFF Power off the board :Argument: Integer value providing power off status information :configuration: CONFIG_BOARDCTL_POWEROFF :dependencies: Board logic must provide the :c:func:`board_power_off` interface. .. c:macro:: BOARDIOC_RESET Reset the board :Argument: Integer value providing power off status information :configuration: CONFIG_BOARDCTL_RESET :dependencies: Board logic must provide the :c:func:`board_reset` interface. Power Management ---------------- .. c:macro:: BOARDIOC_PM_CONTROL Manage power state transition and query. The supplied argument indicates the specific PM operation to perform, which map to corresponding internal ``pm_`` functions (see :doc:`/components/power`). With this interface you can interact with PM handling arch/board logic (typically done in IDLE loop) or you can directly manage state transitions from userspace. :Argument: A pointer to an instance of :c:struct:`boardioc_pm_ctrl_s`. :configuration: CONFIG_PM Board information ----------------- .. c:macro:: BOARDIOC_UNIQUEID Return a unique ID associated with the board (such as a serial number or a MAC address). :Argument: A writable array of size :c:macro:`CONFIG_BOARDCTL_UNIQUEID_SIZE` in which to receive the board unique ID. :dependencies: Board logic must provide the :c:func:`board_uniqueid` interface. Filesystems ----------- .. c:macro:: BOARDIOC_MKRD Create a RAM disk :Argument: Pointer to read-only instance of :c:struct:`boardioc_mkrd_s`. :configuration: CONFIG_BOARDCTL_MKRD .. c:macro:: BOARDIOC_ROMDISK Register a ROM disk :Argument: Pointer to read-only instance of :c:struct:`boardioc_romdisk_s`. :configuration: CONFIG_BOARDCTL_ROMDISK Symbol Handling --------------- .. c:macro:: BOARDIOC_APP_SYMTAB Select the application symbol table. This symbol table provides the symbol definitions exported to application code from application space. :Argument: A pointer to an instance of :c:struct:`boardioc_symtab_s`. :configuration: CONFIG_BOARDCTL_APP_SYMTAB .. c:macro:: BOARDIOC_OS_SYMTAB Select the OS symbol table. This symbol table provides the symbol definitions exported by the OS to kernel modules. :Argument: A pointer to an instance of :c:struct:`boardioc_symtab_s`. :configuration: CONFIG_BOARDCTL_OS_SYMTAB .. c:macro:: BOARDIOC_BUILTINS Provide the user-space list of built-in applications for use by BINFS in protected mode. Normally this is small set of globals provided by user-space logic. It provides name-value pairs for associating built-in application names with user-space entry point addresses. These globals are only needed for use by BINFS which executes built-in applications from kernel-space in PROTECTED mode. In the FLAT build, the user space globals are readily available. (BINFS is not supportable in KERNEL mode since user-space address have no general meaning that configuration). :Argument: A pointer to an instance of :c:struct:`boardioc_builtin_s`. :configuration: This command is always available when CONFIG_BUILTIN is enabled, but does nothing unless CONFIG_BUILD_PROTECTED is also selected. USB --- .. c:macro:: BOARDIOC_USBDEV_CONTROL Manage USB device classes :Argument: A pointer to an instance of :c:struct:`boardioc_usbdev_ctrl_s`. :configuration: CONFIG_BOARDCTL && CONFIG_BOARDCTL_USBDEVCTRL :dependencies: Board logic must provide ``board__initialize()`. Graphics -------- .. c:macro:: BOARDIOC_NX_START Start the NX server :Argument: Integer display number to be served by this NXMU instance. :configuration: CONFIG_NX :dependencies: Base graphics logic provides :c:func:`nxmu_start`. .. c:macro:: BOARDIOC_VNC_START Start the NX server and framebuffer driver. :Argument: A reference readable instance of :c:struct:`boardioc_vncstart_s`. :configuration: CONFIG_VNCSERVER :dependencies: VNC server provides :c:func:`nx_vnc_fbinitialize`. .. c:macro:: BOARDIOC_NXTERM Create an NX terminal device :Argument: A reference readable/writable instance of :c:struct:`boardioc_nxterm_create_s`. :configuration: CONFIG_NXTERM :dependencies: Base NX terminal logic provides :c:func:`nx_register` and :c:func:`nxtk_register`. .. c:macro:: BOARDIOC_NXTERM_IOCTL Create an NX terminal IOCTL command. Normal IOCTLs cannot be be performed in most graphics contexts since the depend on the task holding an open file descriptor :Argument: A reference readable/writable instance of :c:struct:`boardioc_nxterm_ioctl_s`. :configuration: CONFIG_NXTERM :dependencies: Base NX terminal logic provides :c:func:`nxterm_ioctl_tap`. Testing ------- .. c:macro:: BOARDIOC_TESTSET Access architecture-specific up_testset() operation :Argument: A pointer to a write-able spinlock object. On success the preceding spinlock state is returned: 0=unlocked, 1=locked. :configuration: CONFIG_BOARDCTL_TESTSET :dependencies: Architecture-specific logic provides :c:func:`up_testset`.