/**************************************************************************** * sched/init/nx_start.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "sched/sched.h" #include "signal/signal.h" #include "semaphore/semaphore.h" #include "mqueue/mqueue.h" #include "clock/clock.h" #include "timer/timer.h" #include "irq/irq.h" #include "group/group.h" #include "init/init.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* This set of all CPUs */ #define SCHED_ALL_CPUS ((1 << CONFIG_SMP_NCPUS) - 1) /**************************************************************************** * Public Data ****************************************************************************/ /* Task Lists ***************************************************************/ /* The state of a task is indicated both by the task_state field of the TCB * and by a series of task lists. All of these tasks lists are declared * below. Although it is not always necessary, most of these lists are * prioritized so that common list handling logic can be used (only the * g_readytorun, the g_pendingtasks, and the g_waitingforsemaphore lists * need to be prioritized). */ /* This is the list of all tasks that are ready to run. This is a * prioritized list with head of the list holding the highest priority * (unassigned) task. In the non-SMP case, the head of this list is the * currently active task and the tail of this list, the lowest priority * task, is always the IDLE task. */ volatile dq_queue_t g_readytorun; /* In order to support SMP, the function of the g_readytorun list changes, * The g_readytorun is still used but in the SMP case it will contain only: * * - Only tasks/threads that are eligible to run, but not currently running, * and * - Tasks/threads that have not been assigned to a CPU. * * Otherwise, the TCB will be retained in an assigned task list, * g_assignedtasks. As its name suggests, on 'g_assignedtasks queue for CPU * 'n' would contain only tasks/threads that are assigned to CPU 'n'. Tasks/ * threads would be assigned a particular CPU by one of two mechanisms: * * - (Semi-)permanently through an RTOS interfaces such as * pthread_attr_setaffinity(), or * - Temporarily through scheduling logic when a previously unassigned task * is made to run. * * Tasks/threads that are assigned to a CPU via an interface like * pthread_attr_setaffinity() would never go into the g_readytorun list, but * would only go into the g_assignedtasks[n] list for the CPU 'n' to which * the thread has been assigned. Hence, the g_readytorun list would hold * only unassigned tasks/threads. * * Like the g_readytorun list in in non-SMP case, each g_assignedtask[] list * is prioritized: The head of the list is the currently active task on this * CPU. Tasks after the active task are ready-to-run and assigned to this * CPU. The tail of this assigned task list, the lowest priority task, is * always the CPU's IDLE task. */ #ifdef CONFIG_SMP volatile dq_queue_t g_assignedtasks[CONFIG_SMP_NCPUS]; #endif /* g_running_tasks[] holds a references to the running task for each cpu. * It is valid only when up_interrupt_context() returns true. */ FAR struct tcb_s *g_running_tasks[CONFIG_SMP_NCPUS]; /* This is the list of all tasks that are ready-to-run, but cannot be placed * in the g_readytorun list because: (1) They are higher priority than the * currently active task at the head of the g_readytorun list, and (2) the * currently active task has disabled pre-emption. */ volatile dq_queue_t g_pendingtasks; /* This is the list of all tasks that are blocked waiting for a semaphore */ volatile dq_queue_t g_waitingforsemaphore; /* This is the list of all tasks that are blocked waiting for a signal */ volatile dq_queue_t g_waitingforsignal; #ifndef CONFIG_DISABLE_MQUEUE /* This is the list of all tasks that are blocked waiting for a message * queue to become non-empty. */ volatile dq_queue_t g_waitingformqnotempty; #endif #ifndef CONFIG_DISABLE_MQUEUE /* This is the list of all tasks that are blocked waiting for a message * queue to become non-full. */ volatile dq_queue_t g_waitingformqnotfull; #endif #ifdef CONFIG_PAGING /* This is the list of all tasks that are blocking waiting for a page fill */ volatile dq_queue_t g_waitingforfill; #endif #ifdef CONFIG_SIG_SIGSTOP_ACTION /* This is the list of all tasks that have been stopped * via SIGSTOP or SIGTSTP */ volatile dq_queue_t g_stoppedtasks; #endif /* This the list of all tasks that have been initialized, but not yet * activated. NOTE: This is the only list that is not prioritized. */ volatile dq_queue_t g_inactivetasks; /* This is the value of the last process ID assigned to a task */ volatile pid_t g_lastpid; /* The following hash table is used for two things: * * 1. This hash table greatly speeds the determination of a new unique * process ID for a task, and * 2. Is used to quickly map a process ID into a TCB. */ FAR struct tcb_s **g_pidhash; volatile int g_npidhash; /* This is a table of task lists. This table is indexed by the task stat * enumeration type (tstate_t) and provides a pointer to the associated * static task list (if there is one) as well as a a set of attribute flags * indicating properties of the list, for example, if the list is an * ordered list or not. */ const struct tasklist_s g_tasklisttable[NUM_TASK_STATES] = { { /* TSTATE_TASK_INVALID */ NULL, 0 }, { /* TSTATE_TASK_PENDING */ &g_pendingtasks, TLIST_ATTR_PRIORITIZED }, #ifdef CONFIG_SMP { /* TSTATE_TASK_READYTORUN */ &g_readytorun, TLIST_ATTR_PRIORITIZED }, { /* TSTATE_TASK_ASSIGNED */ g_assignedtasks, TLIST_ATTR_PRIORITIZED | TLIST_ATTR_INDEXED | TLIST_ATTR_RUNNABLE }, { /* TSTATE_TASK_RUNNING */ g_assignedtasks, TLIST_ATTR_PRIORITIZED | TLIST_ATTR_INDEXED | TLIST_ATTR_RUNNABLE }, #else { /* TSTATE_TASK_READYTORUN */ &g_readytorun, TLIST_ATTR_PRIORITIZED | TLIST_ATTR_RUNNABLE }, { /* TSTATE_TASK_RUNNING */ &g_readytorun, TLIST_ATTR_PRIORITIZED | TLIST_ATTR_RUNNABLE }, #endif { /* TSTATE_TASK_INACTIVE */ &g_inactivetasks, 0 }, { /* TSTATE_WAIT_SEM */ &g_waitingforsemaphore, TLIST_ATTR_PRIORITIZED }, { /* TSTATE_WAIT_SIG */ &g_waitingforsignal, 0 } #ifndef CONFIG_DISABLE_MQUEUE , { /* TSTATE_WAIT_MQNOTEMPTY */ &g_waitingformqnotempty, TLIST_ATTR_PRIORITIZED }, { /* TSTATE_WAIT_MQNOTFULL */ &g_waitingformqnotfull, TLIST_ATTR_PRIORITIZED } #endif #ifdef CONFIG_PAGING , { /* TSTATE_WAIT_PAGEFILL */ &g_waitingforfill, TLIST_ATTR_PRIORITIZED } #endif #ifdef CONFIG_SIG_SIGSTOP_ACTION , { /* TSTATE_TASK_STOPPED */ &g_stoppedtasks, 0 /* See tcb->prev_state */ }, #endif }; /* This is the current initialization state. The level of initialization * is only important early in the start-up sequence when certain OS or * hardware resources may not yet be available to the kernel logic. */ uint8_t g_nx_initstate; /* See enum nx_initstate_e */ /**************************************************************************** * Private Data ****************************************************************************/ /* This is an array of task control block (TCB) for the IDLE thread of each * CPU. For the non-SMP case, this is a a single TCB; For the SMP case, * there is one TCB per CPU. NOTE: The system boots on CPU0 into the IDLE * task. The IDLE task later starts the other CPUs and spawns the user * initialization task. That user initialization task is responsible for * bringing up the rest of the system. */ static struct task_tcb_s g_idletcb[CONFIG_SMP_NCPUS]; /* This is the name of the idle task */ #if CONFIG_TASK_NAME_SIZE <= 0 || !defined(CONFIG_SMP) #ifdef CONFIG_SMP static const char g_idlename[] = "CPU Idle"; #else static const char g_idlename[] = "Idle Task"; #endif #endif /* This the IDLE idle threads argument list. NOTE: Normally the argument * list is created on the stack prior to starting the task. We have to * do things s little differently here for the IDLE tasks. */ static FAR char *g_idleargv[CONFIG_SMP_NCPUS][2]; /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: nx_start * * Description: * This function is called to initialize the operating system and to spawn * the user initialization thread of execution. This is the initial entry * point into NuttX * * Input Parameters: * None * * Returned Value: * Does not return. * ****************************************************************************/ void nx_start(void) { int i; sinfo("Entry\n"); /* Boot up is complete */ g_nx_initstate = OSINIT_BOOT; /* Initialize RTOS Data ***************************************************/ /* Initialize the IDLE task TCB *******************************************/ for (i = 0; i < CONFIG_SMP_NCPUS; i++) { FAR dq_queue_t *tasklist; /* Initialize a TCB for this thread of execution. NOTE: The default * value for most components of the g_idletcb are zero. The entire * structure is set to zero. Then only the (potentially) non-zero * elements are initialized. NOTE: The idle task is the only task in * that has pid == 0 and sched_priority == 0. */ memset((void *)&g_idletcb[i], 0, sizeof(struct task_tcb_s)); g_idletcb[i].cmn.pid = i; g_idletcb[i].cmn.task_state = TSTATE_TASK_RUNNING; /* Set the entry point. This is only for debug purposes. NOTE: that * the start_t entry point is not saved. That is acceptable, however, * because it can be used only for restarting a task: The IDLE task * cannot be restarted. */ #ifdef CONFIG_SMP if (i > 0) { g_idletcb[i].cmn.start = nx_idle_trampoline; g_idletcb[i].cmn.entry.main = (main_t)nx_idle_trampoline; } else #endif { g_idletcb[i].cmn.start = nx_start; g_idletcb[i].cmn.entry.main = (main_t)nx_start; } /* Set the task flags to indicate that this is a kernel thread and, if * configured for SMP, that this task is locked to this CPU. */ #ifdef CONFIG_SMP g_idletcb[i].cmn.flags = (TCB_FLAG_TTYPE_KERNEL | TCB_FLAG_NONCANCELABLE | TCB_FLAG_CPU_LOCKED); g_idletcb[i].cmn.cpu = i; /* Set the affinity mask to allow the thread to run on all CPUs. No, * this IDLE thread can only run on its assigned CPU. That is * enforced by the TCB_FLAG_CPU_LOCKED which overrides the affinity * mask. This is essential because all tasks inherit the affinity * mask from their parent and, ultimately, the parent of all tasks is * the IDLE task. */ g_idletcb[i].cmn.affinity = SCHED_ALL_CPUS; #else g_idletcb[i].cmn.flags = (TCB_FLAG_TTYPE_KERNEL | TCB_FLAG_NONCANCELABLE); #endif #if CONFIG_TASK_NAME_SIZE > 0 /* Set the IDLE task name */ # ifdef CONFIG_SMP snprintf(g_idletcb[i].cmn.name, CONFIG_TASK_NAME_SIZE, "CPU%d IDLE", i); # else strlcpy(g_idletcb[i].cmn.name, g_idlename, CONFIG_TASK_NAME_SIZE); # endif /* Configure the task name in the argument list. The IDLE task does * not really have an argument list, but this name is still useful * for things like the NSH PS command. * * In the kernel mode build, the arguments are saved on the task's * stack and there is no support that yet. */ g_idleargv[i][0] = g_idletcb[i].cmn.name; #else g_idleargv[i][0] = (FAR char *)g_idlename; #endif /* CONFIG_TASK_NAME_SIZE */ /* Then add the idle task's TCB to the head of the current ready to * run list. */ #ifdef CONFIG_SMP tasklist = TLIST_HEAD(TSTATE_TASK_RUNNING, i); #else tasklist = TLIST_HEAD(TSTATE_TASK_RUNNING); #endif dq_addfirst((FAR dq_entry_t *)&g_idletcb[i], tasklist); /* Mark the idle task as the running task */ g_running_tasks[i] = &g_idletcb[i].cmn; } /* Task lists are initialized */ g_nx_initstate = OSINIT_TASKLISTS; /* Initialize RTOS facilities *********************************************/ /* Initialize the semaphore facility. This has to be done very early * because many subsystems depend upon fully functional semaphores. */ nxsem_initialize(); #if defined(MM_KERNEL_USRHEAP_INIT) || defined(CONFIG_MM_KERNEL_HEAP) || \ defined(CONFIG_MM_PGALLOC) /* Initialize the memory manager */ { FAR void *heap_start; size_t heap_size; #ifdef MM_KERNEL_USRHEAP_INIT /* Get the user-mode heap from the platform specific code and configure * the user-mode memory allocator. */ up_allocate_heap(&heap_start, &heap_size); kumm_initialize(heap_start, heap_size); #endif #ifdef CONFIG_MM_KERNEL_HEAP /* Get the kernel-mode heap from the platform specific code and * configure the kernel-mode memory allocator. */ up_allocate_kheap(&heap_start, &heap_size); kmm_initialize(heap_start, heap_size); #endif #ifdef CONFIG_MM_PGALLOC /* If there is a page allocator in the configuration, then get the page * heap information from the platform-specific code and configure the * page allocator. */ up_allocate_pgheap(&heap_start, &heap_size); mm_pginitialize(heap_start, heap_size); #endif } #endif #ifdef CONFIG_ARCH_HAVE_EXTRA_HEAPS /* Initialize any extra heap. */ up_extraheaps_init(); #endif #ifdef CONFIG_MM_IOB /* Initialize IO buffering */ iob_initialize(); #endif /* Initialize the logic that determine unique process IDs. */ g_npidhash = 4; while (g_npidhash <= CONFIG_SMP_NCPUS) { g_npidhash <<= 1; } g_pidhash = kmm_zalloc(sizeof(*g_pidhash) * g_npidhash); DEBUGASSERT(g_pidhash); /* IDLE Group Initialization **********************************************/ for (i = 0; i < CONFIG_SMP_NCPUS; i++) { FAR struct tls_info_s *info; int hashndx; /* Assign the process ID(s) of ZERO to the idle task(s) */ hashndx = PIDHASH(i); g_pidhash[hashndx] = &g_idletcb[i].cmn; /* Allocate the IDLE group */ DEBUGVERIFY(group_allocate(&g_idletcb[i], g_idletcb[i].cmn.flags)); g_idletcb[i].cmn.group->tg_info->argv = &g_idleargv[i][0]; #ifdef CONFIG_SMP /* Create a stack for all CPU IDLE threads (except CPU0 which already * has a stack). */ if (i > 0) { DEBUGVERIFY(up_cpu_idlestack(i, &g_idletcb[i].cmn, CONFIG_IDLETHREAD_STACKSIZE)); } #endif /* Initialize the processor-specific portion of the TCB */ up_initial_state(&g_idletcb[i].cmn); /* Initialize the thread local storage * Note: Don't copy tdata and tss for idle task to improve footprint */ info = up_stack_frame(&g_idletcb[i].cmn, sizeof(struct tls_info_s)); DEBUGASSERT(info == g_idletcb[i].cmn.stack_alloc_ptr); info->tl_task = g_idletcb[i].cmn.group->tg_info; /* Complete initialization of the IDLE group. Suppress retention * of child status in the IDLE group. */ group_initialize(&g_idletcb[i]); g_idletcb[i].cmn.group->tg_flags = GROUP_FLAG_NOCLDWAIT; } g_lastpid = CONFIG_SMP_NCPUS - 1; /* The memory manager is available */ g_nx_initstate = OSINIT_MEMORY; #if defined(CONFIG_SCHED_HAVE_PARENT) && defined(CONFIG_SCHED_CHILD_STATUS) /* Initialize tasking data structures */ #ifdef CONFIG_HAVE_WEAKFUNCTIONS if (task_initialize != NULL) #endif { task_initialize(); } #endif /* Disables context switching beacuse we need take the memory manager * semaphore on this CPU so that it will not be available on the other * CPUs until we have finished initialization. */ sched_lock(); /* Initialize the file system (needed to support device drivers) */ fs_initialize(); /* Initialize the interrupt handling subsystem (if included) */ #ifdef CONFIG_HAVE_WEAKFUNCTIONS if (irq_initialize != NULL) #endif { irq_initialize(); } /* Initialize the POSIX timer facility (if included in the link) */ #ifdef CONFIG_HAVE_WEAKFUNCTIONS if (clock_initialize != NULL) #endif { clock_initialize(); } #ifndef CONFIG_DISABLE_POSIX_TIMERS #ifdef CONFIG_HAVE_WEAKFUNCTIONS if (timer_initialize != NULL) #endif { timer_initialize(); } #endif /* Initialize the signal facility (if in link) */ #ifdef CONFIG_HAVE_WEAKFUNCTIONS if (nxsig_initialize != NULL) #endif { nxsig_initialize(); } #ifndef CONFIG_DISABLE_MQUEUE /* Initialize the named message queue facility (if in link) */ #ifdef CONFIG_HAVE_WEAKFUNCTIONS if (nxmq_initialize != NULL) #endif { nxmq_initialize(); } #endif #ifdef CONFIG_NET /* Initialize the networking system */ net_initialize(); #endif #ifndef CONFIG_BINFMT_DISABLE /* Initialize the binfmt system */ binfmt_initialize(); #endif /* Initialize common drivers */ drivers_initialize(); /* Initialize Hardware Facilities *****************************************/ /* The processor specific details of running the operating system * will be handled here. Such things as setting up interrupt * service routines and starting the clock are some of the things * that are different for each processor and hardware platform. */ up_initialize(); #ifdef CONFIG_BOARD_EARLY_INITIALIZE /* Call the board-specific up_initialize() extension to support * early initialization of board-specific drivers and resources * that cannot wait until board_late_initialize. */ board_early_initialize(); #endif /* Hardware resources are now available */ g_nx_initstate = OSINIT_HARDWARE; /* Setup for Multi-Tasking ************************************************/ /* Announce that the CPU0 IDLE task has started */ sched_note_start(&g_idletcb[0].cmn); /* Initialize stdio for the IDLE task of each CPU */ for (i = 0; i < CONFIG_SMP_NCPUS; i++) { if (i > 0) { /* Clone stdout, stderr, stdin from the CPU0 IDLE task. */ DEBUGVERIFY(group_setuptaskfiles(&g_idletcb[i])); } else { /* Create stdout, stderr, stdin on the CPU0 IDLE task. These * will be inherited by all of the threads created by the CPU0 * IDLE task. */ DEBUGVERIFY(group_setupidlefiles(&g_idletcb[i])); } } #ifdef CONFIG_SMP /* Start all CPUs *********************************************************/ /* A few basic sanity checks */ DEBUGASSERT(this_cpu() == 0); /* Then start the other CPUs */ DEBUGVERIFY(nx_smp_start()); #endif /* CONFIG_SMP */ /* Bring Up the System ****************************************************/ /* The OS is fully initialized and we are beginning multi-tasking */ g_nx_initstate = OSINIT_OSREADY; /* Create initial tasks and bring-up the system */ DEBUGVERIFY(nx_bringup()); /* Enter to idleloop */ g_nx_initstate = OSINIT_IDLELOOP; /* Let other threads have access to the memory manager */ sched_unlock(); /* The IDLE Loop **********************************************************/ /* When control is return to this point, the system is idle. */ sinfo("CPU0: Beginning Idle Loop\n"); for (; ; ) { /* Perform any processor-specific idle state operations */ up_idle(); } }