############################################################################
# tools/Makefile.unix
#
#   Copyright (C) 2007-2012, 2014-2015, 2018-2019 Gregory Nutt. All rights
#      reserved.
#   Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with the
#    distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
#    used to endorse or promote products derived from this software
#    without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################

TOPDIR := ${shell echo $(CURDIR) | sed -e 's/ /\\ /g'}
-include $(TOPDIR)/.config
include $(TOPDIR)/tools/Config.mk
-include $(TOPDIR)/Make.defs

# GIT directory present

GIT_DIR = $(if $(wildcard $(TOPDIR)$(DELIM).git),y,)

# In case we cannot get version information from GIT

ifneq ($(GIT_DIR),y)
-include $(TOPDIR)/.version

# In case the version file does not exist

CONFIG_VERSION_STRING ?= "0.0"
CONFIG_VERSION_BUILD ?= "0"

VERSION_ARG = -v $(CONFIG_VERSION_STRING) -b $(CONFIG_VERSION_BUILD)
endif

# Control build verbosity
#
#  V=1,2: Enable echo of commands
#  V=2:   Enable bug/verbose options in tools and scripts

ifeq ($(V),1)
export Q :=
else
ifeq ($(V),2)
export Q :=
else
export Q := @
endif
endif

# Default tools

ifeq ($(DIRLINK),)
DIRLINK = $(TOPDIR)/tools/link.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
endif

# This define is passed as EXTRADEFINES for kernel-mode builds.  It is also passed
# during PASS1 (but not PASS2) context and depend targets.

KDEFINE = ${shell $(DEFINE) "$(CC)" __KERNEL__}

# Process architecture and board-specific directories

ARCH_DIR = arch/$(CONFIG_ARCH)
ARCH_SRC = $(ARCH_DIR)/src
ARCH_INC = $(ARCH_DIR)/include

ifeq ($(CONFIG_ARCH_BOARD_CUSTOM),y)
ifeq ($(CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH),y)
BOARD_DIR = $(TOPDIR)$(DELIM)$(CONFIG_ARCH_BOARD_CUSTOM_DIR)
else
BOARD_DIR = $(CONFIG_ARCH_BOARD_CUSTOM_DIR)
endif
else
BOARD_DIR = $(TOPDIR)$(DELIM)boards$(DELIM)$(CONFIG_ARCH)$(DELIM)$(CONFIG_ARCH_CHIP)
endif

COMMON_DIR = $(if $(wildcard $(BOARD_DIR)/common/Makefile),y,)

# CONFIG_APPS_DIR can be over-ridden from the command line or in the .config file.
# The default value of CONFIG_APPS_DIR is ../apps.  Ultimately, the application
# will be built if APPDIR is defined.  APPDIR will be defined if a directory containing
# a Makefile is found at the path provided by CONFIG_APPS_DIR

ifeq ($(CONFIG_APPS_DIR),)
CONFIG_APPS_DIR = ../apps
endif
APPDIR := ${shell if [ -r $(CONFIG_APPS_DIR)/Makefile ]; then echo "$(CONFIG_APPS_DIR)"; fi}

# CONTEXTDIRS include directories that have special, one-time pre-build
#   requirements.  Normally this includes things like auto-generation of
#   configuration specific files or creation of configurable symbolic links
# CLEANDIRS are the directories that the clean target will executed in.
#   These are all directories that we know about.
# CCLEANDIRS are directories that the clean_context target will execute in.
#   The clean_context target "undoes" the actions of the context target.
#   Only directories known to require cleaning are included.
# KERNDEPDIRS are the directories in which we will build target dependencies.
#   If NuttX and applications are built separately (CONFIG_BUILD_PROTECTED or
#   CONFIG_BUILD_KERNEL), then this holds only the directories containing
#   kernel files.
# USERDEPDIRS. If NuttX and applications are built separately (CONFIG_BUILD_PROTECTED),
#   then this holds only the directories containing user files. If
#   CONFIG_BUILD_KERNEL is selected, then applications are not build at all.

include tools/Directories.mk

#
# Extra objects used in the final link.
#
# Pass 1 Incremental (relative) link objects should be put into the
# processor-specific source directory (where other link objects will
# be created).  If the pass1 object is an archive, it could go anywhere.

ifeq ($(CONFIG_BUILD_2PASS),y)
EXTRA_OBJS += $(CONFIG_PASS1_OBJECT)
endif

# Library build selections
#
# NUTTXLIBS is the list of NuttX libraries that is passed to the
#   processor-specific Makefile to build the final NuttX target.
# USERLIBS is the list of libraries used to build the final user-space
#   application
# EXPORTLIBS is the list of libraries that should be exported by
#   'make export' is

ifeq ($(CONFIG_BUILD_PROTECTED),y)
include tools/ProtectedLibs.mk
else
ifeq ($(CONFIG_BUILD_KERNEL),y)
include tools/KernelLibs.mk
else
include tools/FlatLibs.mk
endif
endif

# LINKLIBS derives from NUTTXLIBS and is simply the same list with the
#   subdirectory removed

LINKLIBS = $(patsubst staging/%,%,$(NUTTXLIBS))

# Export tool definitions

MKEXPORT= tools/mkexport.sh
MKEXPORT_ARGS = -w$(WINTOOL) -t "$(TOPDIR)"

ifeq ($(CONFIG_BUILD_PROTECTED),y)
MKEXPORT_ARGS += -u
else ifeq ($(CONFIG_BUILD_KERNEL),y)
MKEXPORT_ARGS += -u
endif

ifneq ($(APPDIR),)
ifneq ($(shell [ -e $(APPDIR)/Makefile ] && echo yes),)
MKEXPORT_ARGS += -a "$(APPDIR)"
MKEXPORT_ARGS += -m "$(MAKE)"
endif
endif

ifeq ($(V),2)
MKEXPORT_ARGS += -d
endif

# This is the name of the final target (relative to the top level directory)

NUTTXNAME = nuttx
BIN       = $(NUTTXNAME)$(EXEEXT)

all: $(BIN)
.PHONY: dirlinks context clean_context check_context config oldconfig menuconfig nconfig qconfig gconfig export subdir_clean clean subdir_distclean distclean apps_clean apps_distclean
ifeq ($(GIT_DIR),y)
.PHONY: $(TOPDIR)/.version
endif

# Target used to copy include/nuttx/lib/math.h.  If CONFIG_ARCH_MATH_H is
# defined, then there is an architecture specific math.h header file
# that will be included indirectly from include/math.h.  But first, we
# have to copy math.h from include/nuttx/. to include/.  Logic within
# include/nuttx/lib/math.h will hand the redirection to the architecture-
# specific math.h header file.
#
# If the CONFIG_LIBM is defined, the Rhombus libm will be built at libc/math.
# Definitions and prototypes for the Rhombus libm are also contained in
# include/nuttx/lib/math.h and so the file must also be copied in that case.
#
# If neither CONFIG_ARCH_MATH_H nor CONFIG_LIBM is defined, then no math.h
# header file will be provided.  You would want that behavior if (1) you
# don't use libm, or (2) you want to use the math.h and libm provided
# within your toolchain.

ifeq ($(CONFIG_ARCH_MATH_H),y)
NEED_MATH_H = y
else
ifeq ($(CONFIG_LIBM),y)
NEED_MATH_H = y
endif
endif

ifeq ($(NEED_MATH_H),y)
include/math.h: include/nuttx/lib/math.h
	$(Q) cp -pf include/nuttx/lib/math.h include/math.h
else
include/math.h:
endif

# The float.h header file defines the properties of your floating point
# implementation.  It would always be best to use your toolchain's float.h
# header file but if none is available, a default float.h header file will
# provided if this option is selected.  However there is no assurance that
# the settings in this float.h are actually correct for your platform!

ifeq ($(CONFIG_ARCH_FLOAT_H),y)
include/float.h: include/nuttx/lib/float.h
	$(Q) cp -pf include/nuttx/lib/float.h include/float.h
else
include/float.h:
endif

# Target used to copy include/nuttx/lib/stdarg.h.  If CONFIG_ARCH_STDARG_H is
# defined, then there is an architecture specific stdarg.h header file
# that will be included indirectly from include/lib/stdarg.h.  But first, we
# have to copy stdarg.h from include/nuttx/. to include/.

ifeq ($(CONFIG_ARCH_STDARG_H),y)
include/stdarg.h: include/nuttx/lib/stdarg.h
	$(Q) cp -pf include/nuttx/lib/stdarg.h include/stdarg.h
else
include/stdarg.h:
endif

# Target used to copy include/nuttx/lib/setjmp.h.  If CONFIG_ARCH_SETJMP_H is
# defined, then there is an architecture specific setjmp.h header file
# that will be included indirectly from include/lib/setjmp.h.  But first, we
# have to copy setjmp.h from include/nuttx/. to include/.

ifeq ($(CONFIG_ARCH_SETJMP_H),y)
include/setjmp.h: include/nuttx/lib/setjmp.h
	$(Q) cp -pf include/nuttx/lib/setjmp.h include/setjmp.h
else
include/setjmp.h:
endif

# Targets used to build include/nuttx/version.h.  Creation of version.h is
# part of the overall NuttX configuration sequence. Notice that the
# tools/mkversion tool is built and used to create include/nuttx/version.h

tools/mkversion$(HOSTEXEEXT):
	$(Q) $(MAKE) -C tools -f Makefile.host TOPDIR="$(TOPDIR)"  mkversion$(HOSTEXEEXT)

# [Re-]create .version if it doesn't already exist.

$(TOPDIR)/.version:
	$(Q) echo "Create .version"
	$(Q) tools/version.sh $(VERSION_ARG) .version
	$(Q) chmod 755 .version

include/nuttx/version.h: $(TOPDIR)/.version tools/mkversion$(HOSTEXEEXT)
	$(Q) echo "Create version.h"
	$(Q) tools/mkversion $(TOPDIR) > $@.tmp
	$(Q) $(call TESTANDREPLACEFILE, $@.tmp, $@)

# Targets used to build include/nuttx/config.h.  Creation of config.h is
# part of the overall NuttX configuration sequence. Notice that the
# tools/mkconfig tool is built and used to create include/nuttx/config.h

tools/mkconfig$(HOSTEXEEXT):
	$(Q) $(MAKE) -C tools -f Makefile.host TOPDIR="$(TOPDIR)"  mkconfig$(HOSTEXEEXT)

staging:
	$(Q) mkdir -p staging

include/nuttx/config.h: $(TOPDIR)/.config tools/mkconfig$(HOSTEXEEXT)
	$(Q) tools/mkconfig $(TOPDIR) > include/nuttx/config.h.tmp
	$(Q) $(call TESTANDREPLACEFILE, include/nuttx/config.h.tmp, $@)

# Targets used to create dependencies

tools/mkdeps$(HOSTEXEEXT):
	$(Q) $(MAKE) -C tools -f Makefile.host TOPDIR="$(TOPDIR)" mkdeps$(HOSTEXEEXT)

tools/cnvwindeps$(HOSTEXEEXT):
	$(Q) $(MAKE) -C tools -f Makefile.host TOPDIR="$(TOPDIR)" cnvwindeps$(HOSTEXEEXT)

# dirlinks, and helpers
#
# Directories links.  Most of establishing the NuttX configuration involves
# setting up symbolic links with 'generic' directory names to specific,
# configured directories.

# Make.defs:
# 	$(Q) echo "No Make.defs file found, creating one"
# 	$(Q) echo "include $(TOPDIR)$(DELIM).config" > Make.defs
# 	$(Q) echo "include $(TOPDIR)$(DELIM)tools$(DELIM)Config.mk" >> Make.defs

# tools/initialconfig$(HOSTEXEEXT):
# 	$(Q) $(MAKE) -C tools -f Makefile.host TOPDIR="$(TOPDIR)" initialconfig$(HOSTEXEEXT)
#
# .config: tools/initialconfig$(HOSTEXEEXT)
# 	$(Q) echo "No .config file found, creating one"
# 	$(Q) tools/initialconfig$(HOSTEXEEXT)

# Link the arch/<arch-name>/include directory to include/arch

include/arch: .config
	@echo "LN: include/arch to $(ARCH_DIR)/include"
	$(Q) $(DIRLINK) $(TOPDIR)/$(ARCH_DIR)/include include/arch

# Link the boards/<arch>/<chip>/<board>/include directory to include/arch/board

include/arch/board: include/arch
	@echo "LN: include/arch/board to $(BOARD_DIR)/$(CONFIG_ARCH_BOARD)/include"
	$(Q) $(DIRLINK) $(BOARD_DIR)/$(CONFIG_ARCH_BOARD)/include include/arch/board

ifeq ($(COMMON_DIR),y)
# Link the boards/<arch>/<chip>/common dir to arch/<arch-name>/src/board
# Link the boards/<arch>/<chip>/<board>/src dir to arch/<arch-name>/src/board/board

$(ARCH_SRC)/board: .config
	@echo "LN: $(ARCH_SRC)/board to $(BOARD_DIR)/common"
	$(Q) $(DIRLINK) $(BOARD_DIR)/common $(ARCH_SRC)/board
	@echo "LN: $(ARCH_SRC)/board/board to $(BOARD_DIR)/$(CONFIG_ARCH_BOARD)/src"
	$(Q) $(DIRLINK) $(BOARD_DIR)/$(CONFIG_ARCH_BOARD)/src $(ARCH_SRC)/board/board
else
# Link the boards/<arch>/<chip>/<board>/src dir to arch/<arch-name>/src/board

$(ARCH_SRC)/board: .config
	@echo "LN: $(ARCH_SRC)/board to $(BOARD_DIR)/$(CONFIG_ARCH_BOARD)/src"
	$(Q) $(DIRLINK) $(BOARD_DIR)/$(CONFIG_ARCH_BOARD)/src $(ARCH_SRC)/board
endif

# Link the boards/<arch>/<chip>/drivers dir to drivers/platform

$(ARCH_SRC)/drivers: .config
	@echo "LN: $(TOPDIR)/drivers/platform to $(BOARD_DIR)/drivers"
	$(Q) $(DIRLINK) $(BOARD_DIR)/drivers $(TOPDIR)/drivers/platform

# Link arch/<arch-name>/src/<chip-name> to arch/<arch-name>/src/chip

$(ARCH_SRC)/chip: .config
ifneq ($(CONFIG_ARCH_CHIP),)
	@echo "LN: $(ARCH_SRC)/chip to $(ARCH_SRC)/$(CONFIG_ARCH_CHIP)"
	$(Q) $(DIRLINK) $(TOPDIR)/$(ARCH_SRC)/$(CONFIG_ARCH_CHIP) $(ARCH_SRC)/chip
endif

# Link arch/<arch-name>/include/<chip-name> to include/arch/chip

include/arch/chip: include/arch
ifneq ($(CONFIG_ARCH_CHIP),)
	@echo "LN: include/arch/chip to $(ARCH_INC)/$(CONFIG_ARCH_CHIP)"
	$(Q) $(DIRLINK) $(TOPDIR)/$(ARCH_INC)/$(CONFIG_ARCH_CHIP) include/arch/chip
endif

dirlinks: include/arch include/arch/board include/arch/chip $(ARCH_SRC)/board $(ARCH_SRC)/chip $(ARCH_SRC)/drivers
	$(Q) $(MAKE) -C boards dirlinks TOPDIR="$(TOPDIR)"
	$(Q) $(MAKE) -C openamp dirlinks TOPDIR="$(TOPDIR)"
	$(Q) $(MAKE) -C $(CONFIG_APPS_DIR) dirlinks TOPDIR="$(TOPDIR)"

# context
#
# The context target is invoked on each target build to assure that NuttX is
# properly configured.  The basic configuration steps include creation of the
# the config.h and version.h header files in the include/nuttx directory and
# the establishment of symbolic links to configured directories.

context: check_context staging include/nuttx/config.h include/nuttx/version.h include/math.h include/float.h include/stdarg.h include/setjmp.h dirlinks
	$(Q) for dir in $(CONTEXTDIRS) ; do \
		$(MAKE) -C $$dir TOPDIR="$(TOPDIR)" context; \
	done

# clean_context
#
# This is part of the distclean target.  It removes all of the header files
# and symbolic links created by the context target.

clean_context:
	$(Q) for dir in $(CCLEANDIRS) ; do \
		if [ -e $$dir/Makefile ]; then \
			$(MAKE) -C $$dir TOPDIR="$(TOPDIR)" clean_context ; \
		fi \
	done
	$(call DELFILE, include/math.h)
	$(call DELFILE, include/stdarg.h)
	$(call DELFILE, include/setjmp.h)

# check_context
#
# This target checks if NuttX has been configured.  NuttX is configured using
# the script tools/configure.sh.  That script will install certain files in
# the top-level NuttX build directory.  This target verifies that those
# configuration files have been installed and that NuttX is ready to be built.

check_context:
	$(Q) if [ ! -e ${TOPDIR}/.config -o ! -e ${TOPDIR}/Make.defs ]; then \
		echo "" ; \
		echo "Nuttx has not been configured:" ; \
		echo "  tools/configure.sh <target>" ; \
		echo "" ; \
		exit 1 ; \
	fi

# Archive targets.  The target build sequence will first create a series of
# libraries, one per configured source file directory.  The final NuttX
# execution will then be built from those libraries.  The following targets
# build those libraries.

include tools/LibTargets.mk

# pass1 and pass2
#
# If the 2 pass build option is selected, then this pass1 target is
# configured to built before the pass2 target.  This pass1 target may, as an
# example, build an extra link object (CONFIG_PASS1_OBJECT) which may be an
# incremental (relative) link object, but could be a static library (archive);
# some modification to this Makefile would be required if CONFIG_PASS1_OBJECT
# is an archive.  Exactly what is performed during pass1 or what it generates
# is unknown to this makefile unless CONFIG_PASS1_OBJECT is defined.

pass1deps: pass1dep $(USERLIBS)

pass1: pass1deps
ifeq ($(CONFIG_BUILD_2PASS),y)
	$(Q) if [ -z "$(CONFIG_PASS1_BUILDIR)" ]; then \
		echo "ERROR: CONFIG_PASS1_BUILDIR not defined"; \
		exit 1; \
	fi
	$(Q) if [ ! -d "$(CONFIG_PASS1_BUILDIR)" ]; then \
		echo "ERROR: CONFIG_PASS1_BUILDIR does not exist"; \
		exit 1; \
	fi
	$(Q) if [ ! -f "$(CONFIG_PASS1_BUILDIR)/Makefile" ]; then \
		echo "ERROR: No Makefile in CONFIG_PASS1_BUILDIR"; \
		exit 1; \
	fi
	$(Q) $(MAKE) -C $(CONFIG_PASS1_BUILDIR) TOPDIR="$(TOPDIR)" LINKLIBS="$(LINKLIBS)" USERLIBS="$(USERLIBS)" "$(CONFIG_PASS1_TARGET)"
endif

pass2deps: pass2dep $(NUTTXLIBS)

pass2: pass2deps
	$(Q) $(MAKE) -C $(ARCH_SRC) TOPDIR="$(TOPDIR)" EXTRA_OBJS="$(EXTRA_OBJS)" LINKLIBS="$(LINKLIBS)" EXTRADEFINES=$(KDEFINE) $(BIN)
	$(Q) if [ -w /tftpboot ] ; then \
		cp -f $(BIN) /tftpboot/$(BIN).${CONFIG_ARCH}; \
	fi
ifeq ($(CONFIG_INTELHEX_BINARY),y)
	@echo "CP: $(NUTTXNAME).hex"
	$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O ihex $(BIN) $(NUTTXNAME).hex
endif
ifeq ($(CONFIG_MOTOROLA_SREC),y)
	@echo "CP: $(NUTTXNAME).srec"
	$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O srec $(BIN) $(NUTTXNAME).srec
endif
ifeq ($(CONFIG_RAW_BINARY),y)
	@echo "CP: $(NUTTXNAME).bin"
	$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary $(BIN) $(NUTTXNAME).bin
endif
ifeq ($(CONFIG_CXD56_BINARY),y)
	$(Q) if [ ! -f "tools/cxd56/mkspk" ] ; then \
		echo ""; \
		echo "Please run the following command to build the needed tool"; \
		echo ""; \
		echo "cd tools/cxd56 && make && cd ../.."; \
		echo ""; \
		echo "run make again to create the nuttx.spk image."; \
	else \
		echo "Generating: $(NUTTXNAME).spk"; \
		tools/cxd56/mkspk -c2 nuttx nuttx nuttx.spk; \
	fi
endif
ifeq ($(CONFIG_UBOOT_UIMAGE),y)
	@echo "MKIMAGE: uImage"
	$(Q) mkimage -A $(CONFIG_ARCH) -O linux -C none -T kernel -a $(CONFIG_UIMAGE_LOAD_ADDRESS) \
		-e $(CONFIG_UIMAGE_ENTRY_POINT) -n $(BIN) -d $(NUTTXNAME).bin uImage
	$(Q) if [ -w /tftpboot ] ; then \
		cp -f uImage /tftpboot/uImage; \
	fi
endif

# $(BIN)
#
# Create the final NuttX executable in a two pass build process.  In the
# normal case, all pass1 and pass2 dependencies are created then pass1
# and pass2 targets are built.  However, in some cases, you may need to build
# pass1 dependencies and pass1 first, then build pass2 dependencies and pass2.
# in that case, execute 'make pass1 pass2' from the command line.

$(BIN): pass1deps pass2deps pass1 pass2

# download
#
# This is a helper target that will rebuild NuttX and download it to the target
# system in one step.  The operation of this target depends completely upon
# implementation of the DOWNLOAD command in the user Make.defs file.  It will
# generate an error an error if the DOWNLOAD command is not defined.

download: $(BIN)
	$(call DOWNLOAD, $<)

# pass1dep: Create pass1 build dependencies
# pass2dep: Create pass2 build dependencies

pass1dep: context tools/mkdeps$(HOSTEXEEXT) tools/cnvwindeps$(HOSTEXEEXT)
	$(Q) for dir in $(USERDEPDIRS) ; do \
		$(MAKE) -C $$dir TOPDIR="$(TOPDIR)" depend ; \
	done

pass2dep: context tools/mkdeps$(HOSTEXEEXT) tools/cnvwindeps$(HOSTEXEEXT)
	$(Q) for dir in $(KERNDEPDIRS) ; do \
		$(MAKE) -C $$dir TOPDIR="$(TOPDIR)" EXTRADEFINES=$(KDEFINE) depend; \
	done

# Configuration targets
#
# These targets depend on the kconfig-frontends packages.  To use these, you
# must first download and install the kconfig-frontends package from this
# location: https://bitbucket.org/nuttx/tools/downloads/.  See README.txt
# file in the NuttX tools GIT repository for additional information.

do_config: dirlinks apps_preconfig
	$(Q) APPSDIR=${CONFIG_APPS_DIR} kconfig-conf Kconfig

config: do_config clean_context

do_oldconfig: dirlinks apps_preconfig
	$(Q) APPSDIR=${CONFIG_APPS_DIR} kconfig-conf --oldconfig Kconfig

oldconfig: do_oldconfig clean_context

do_olddefconfig: dirlinks apps_preconfig
	$(Q) APPSDIR=${CONFIG_APPS_DIR} kconfig-conf --olddefconfig Kconfig

olddefconfig: do_olddefconfig clean_context

do_menuconfig: dirlinks apps_preconfig
	$(Q) APPSDIR=${CONFIG_APPS_DIR} kconfig-mconf Kconfig

menuconfig: do_menuconfig clean_context

do_nconfig: dirlinks apps_preconfig
	$(Q) APPSDIR=${CONFIG_APPS_DIR} kconfig-nconf Kconfig

nconfig: do_nconfig clean_context

do_qconfig: dirlinks apps_preconfig
	$(Q) APPSDIR=${CONFIG_APPS_DIR} kconfig-qconf Kconfig

qconfig: do_qconfig clean_context

do_gconfig: dirlinks apps_preconfig
	$(Q) APPSDIR=${CONFIG_APPS_DIR} kconfig-gconf Kconfig

gconfig: do_gconfig clean_context

do_savedefconfig: dirlinks apps_preconfig

savedefconfig: do_savedefconfig
	$(Q) APPSDIR=${CONFIG_APPS_DIR} kconfig-conf --savedefconfig defconfig.tmp Kconfig
	$(Q) sed -i -e "/CONFIG_APPS_DIR=/d" defconfig.tmp
	$(Q) grep "CONFIG_ARCH=" .config >> defconfig.tmp
	$(Q) grep "^CONFIG_ARCH_CHIP_" .config >> defconfig.tmp; true
	$(Q) grep "^CONFIG_ARCH_CHIP=" .config >> defconfig.tmp; true
	$(Q) grep "CONFIG_ARCH_BOARD=" .config && grep "CONFIG_ARCH_BOARD=" .config >> defconfig.tmp; true
	$(Q) grep "^CONFIG_ARCH_CUSTOM" .config && grep "^CONFIG_ARCH_CUSTOM" .config >> defconfig.tmp; true
	$(Q) grep "^CONFIG_ARCH_BOARD_CUSTOM=" .config && grep "^CONFIG_ARCH_BOARD_CUSTOM" .config >> defconfig.tmp; true
	$(Q) export LC_ALL=C; cat defconfig.tmp | sort | uniq > sortedconfig.tmp
	$(Q) echo "#" > warning.tmp
	$(Q) echo "# This file is autogenerated: PLEASE DO NOT EDIT IT." >> warning.tmp
	$(Q) echo "#" >> warning.tmp
	$(Q) echo "# You can use \"make menuconfig\" to make any modifications to the installed .config file." >> warning.tmp
	$(Q) echo "# You can then do \"make savedefconfig\" to generate a new defconfig file that includes your" >> warning.tmp
	$(Q) echo "# modifications." >> warning.tmp
	$(Q) echo "#" >> warning.tmp
	$(Q) cat warning.tmp sortedconfig.tmp > defconfig
	$(Q) rm -f warning.tmp
	$(Q) rm -f defconfig.tmp
	$(Q) rm -f sortedconfig.tmp

# export
#
# The export target will package the NuttX libraries and header files into
# an exportable package.  Caveats: (1) These needs some extension for the KERNEL
# build; it needs to receive USERLIBS and create a libuser.a). (2) The logic
# in tools/mkexport.sh only supports GCC and, for example, explicitly assumes
# that the archiver is 'ar'

export: pass2deps
	$(Q) MAKE=${MAKE} $(MKEXPORT) $(MKEXPORT_ARGS) -l "$(EXPORTLIBS)"

# General housekeeping targets:  dependencies, cleaning, etc.
#
# depend:    Create both PASS1 and PASS2 dependencies
# clean:     Removes derived object files, archives, executables, and
#            temporary files, but retains the configuration and context
#            files and directories.
# distclean: Does 'clean' then also removes all configuration and context
#            files.  This essentially restores the directory structure
#            to its original, unconfigured stated.

depend: pass1dep pass2dep

subdir_clean:
	$(Q) for dir in $(CLEANDIRS) ; do \
		if [ -e $$dir/Makefile ]; then \
			$(MAKE) -C $$dir TOPDIR="$(TOPDIR)" clean ; \
		fi \
	done
	$(Q) $(MAKE) -C tools -f Makefile.host TOPDIR="$(TOPDIR)" clean
ifeq ($(CONFIG_BUILD_2PASS),y)
	$(Q) $(MAKE) -C $(CONFIG_PASS1_BUILDIR) TOPDIR="$(TOPDIR)" clean
endif

clean: subdir_clean
	$(call DELFILE, $(BIN))
	$(call DELFILE, nuttx.*)
	$(call DELFILE, *.map)
	$(call DELFILE, _SAVED_APPS_config)
	$(call DELFILE, nuttx-export*.zip)
	$(call DELDIR, nuttx-export*)
	$(call DELFILE, nuttx_user*)
	$(call DELDIR, staging)
	$(call CLEAN)

subdir_distclean:
	$(Q) for dir in $(CLEANDIRS) ; do \
		if [ -e $$dir/Makefile ]; then \
			$(MAKE) -C $$dir TOPDIR="$(TOPDIR)" distclean ; \
		fi \
	done

distclean: clean subdir_distclean clean_context
ifeq ($(CONFIG_BUILD_2PASS),y)
	$(Q) $(MAKE) -C $(CONFIG_PASS1_BUILDIR) TOPDIR="$(TOPDIR)" distclean
endif
	$(call DELFILE, include/nuttx/config.h)
	$(call DELFILE, include/nuttx/version.h)
	$(call DELFILE, Make.defs)
	$(call DELFILE, .config)
	$(call DELFILE, .config.old)
	$(call DELFILE, .gdbinit)
	$(Q) $(DIRUNLINK) include/arch/board
	$(Q) $(DIRUNLINK) include/arch/chip
	$(Q) $(DIRUNLINK) include/arch
	$(Q) $(DIRUNLINK) $(ARCH_SRC)/board/board
	$(Q) $(DIRUNLINK) $(ARCH_SRC)/board
	$(Q) $(DIRUNLINK) $(ARCH_SRC)/chip
	$(Q) $(DIRUNLINK) $(TOPDIR)/drivers/platform

# Application housekeeping targets.  The APPDIR variable refers to the user
# application directory.  A sample apps/ directory is included with NuttX,
# however, this is not treated as part of NuttX and may be replaced with a
# different application directory.  For the most part, the application
# directory is treated like any other build directory in this script.  However,
# as a convenience, the following targets are included to support housekeeping
# functions in the user application directory from the NuttX build directory.
#
# apps_preconfig: Prepare applications to be configured
# apps_clean:     Perform the clean operation only in the user application
#                 directory
# apps_distclean: Perform the distclean operation only in the user application
#                 directory.

apps_preconfig:
ifneq ($(APPDIR),)
	$(Q) $(MAKE) -C "$(TOPDIR)/$(APPDIR)" TOPDIR="$(TOPDIR)" preconfig
endif

apps_clean:
ifneq ($(APPDIR),)
	$(Q) $(MAKE) -C "$(TOPDIR)/$(APPDIR)" TOPDIR="$(TOPDIR)" clean
endif

apps_distclean:
ifneq ($(APPDIR),)
	$(Q) $(MAKE) -C "$(TOPDIR)/$(APPDIR)" TOPDIR="$(TOPDIR)" distclean
endif