/**************************************************************************** * drivers/usbdev/rndis.c * * Copyright (C) 2011-2018 Gregory Nutt. All rights reserved. * Authors: Sakari Kapanen , * Petteri Aimonen * * References: * [MS-RNDIS]: * Remote Network Driver Interface Specification (RNDIS) Protocol * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "rndis_std.h" /**************************************************************************** * Pre-processor definitions ****************************************************************************/ #define CONFIG_RNDIS_EP0MAXPACKET 64 #ifndef CONFIG_RNDIS_NWRREQS # define CONFIG_RNDIS_NWRREQS (2) #endif #define RNDIS_PACKET_HDR_SIZE (sizeof(struct rndis_packet_msg)) #define CONFIG_RNDIS_BULKIN_REQLEN \ (CONFIG_NET_ETH_PKTSIZE + CONFIG_NET_GUARDSIZE + RNDIS_PACKET_HDR_SIZE) #define CONFIG_RNDIS_BULKOUT_REQLEN CONFIG_RNDIS_BULKIN_REQLEN #define RNDIS_NCONFIGS (1) #define RNDIS_CONFIGID (1) #define RNDIS_CONFIGIDNONE (0) #define RNDIS_NINTERFACES (2) #define RNDIS_EPINTIN_ADDR USB_EPIN(3) #define RNDIS_EPBULKIN_ADDR USB_EPIN(1) #define RNDIS_EPBULKOUT_ADDR USB_EPOUT(2) #define RNDIS_NUM_EPS (3) #define RNDIS_MANUFACTURERSTRID (1) #define RNDIS_PRODUCTSTRID (2) #define RNDIS_SERIALSTRID (3) #define RNDIS_STR_LANGUAGE (0x0409) /* en-us */ #define RNDIS_MXDESCLEN (128) #define RNDIS_MAXSTRLEN (RNDIS_MXDESCLEN-2) #define RNDIS_CTRLREQ_LEN (512) #define RNDIS_BUFFER_SIZE CONFIG_NET_ETH_PKTSIZE #define RNDIS_BUFFER_COUNT 4 /* TX poll delay = 1 seconds. * CLK_TCK is the number of clock ticks per second */ #define RNDIS_WDDELAY (1*CLK_TCK) /* Work queue to use for network operations. LPWORK should be used here */ #define ETHWORK LPWORK #ifndef min # define min(a,b) ((a)<(b)?(a):(b)) #endif #ifndef max # define max(a,b) ((a)>(b)?(a):(b)) #endif /**************************************************************************** * Private Types ****************************************************************************/ /* Container to support a list of requests */ struct rndis_req_s { FAR struct rndis_req_s *flink; /* Implements a singly linked list */ FAR struct usbdev_req_s *req; /* The contained request */ }; /* This structure describes the internal state of the driver */ struct rndis_dev_s { struct net_driver_s netdev; /* Network driver structure */ struct usbdev_devinfo_s devinfo; FAR struct usbdev_s *usbdev; /* usbdev driver pointer */ FAR struct usbdev_ep_s *epintin; /* Interrupt IN endpoint structure */ FAR struct usbdev_ep_s *epbulkin; /* Bulk IN endpoint structure */ FAR struct usbdev_ep_s *epbulkout; /* Bulk OUT endpoint structure */ FAR struct usbdev_req_s *ctrlreq; /* Pointer to preallocated control request */ FAR struct usbdev_req_s *epintin_req; /* Pointer to preallocated interrupt in endpoint request */ FAR struct usbdev_req_s *rdreq; /* Pointer to Preallocated control endpoint read request */ struct sq_queue_s reqlist; /* List of free write request containers */ /* Preallocated USB request buffers */ struct rndis_req_s wrreqs[CONFIG_RNDIS_NWRREQS]; struct work_s rxwork; /* Worker for dispatching RX packets */ struct wdog_s txpoll; /* TX poll watchdog */ struct work_s pollwork; /* TX poll worker */ bool registered; /* Has netdev_register() been called */ uint8_t config; /* USB Configuration number */ FAR struct rndis_req_s *net_req; /* Pointer to request whose buffer is assigned to network */ FAR struct rndis_req_s *rx_req; /* Pointer request container that holds RX buffer */ size_t current_rx_received; /* Number of bytes of current RX datagram received over USB */ size_t current_rx_datagram_size; /* Total number of bytes of the current RX datagram */ size_t current_rx_datagram_offset; /* Offset of current RX datagram */ size_t current_rx_msglen; /* Length of the entire message to be received */ bool rdreq_submitted; /* Indicates if the read request is submitted */ bool rx_blocked; /* Indicates if we can receive packets on bulk in endpoint */ bool ctrlreq_has_encap_response; /* Indicates if ctrlreq buffer holds a response */ bool connected; /* Connection status indicator */ uint32_t rndis_packet_filter; /* RNDIS packet filter value */ uint32_t rndis_host_tx_count; /* TX packet counter */ uint32_t rndis_host_rx_count; /* RX packet counter */ uint8_t host_mac_address[6]; /* Host side MAC address */ }; /* The internal version of the class driver */ struct rndis_driver_s { struct usbdevclass_driver_s drvr; FAR struct rndis_dev_s *dev; }; /* This is what is allocated */ struct rndis_alloc_s { struct rndis_dev_s dev; struct rndis_driver_s drvr; }; /* RNDIS USB configuration descriptor */ struct rndis_cfgdesc_s { #ifndef CONFIG_RNDIS_COMPOSITE struct usb_cfgdesc_s cfgdesc; /* Configuration descriptor */ #endif struct usb_iaddesc_s assoc_desc; /* Interface association descriptor */ struct usb_ifdesc_s comm_ifdesc; /* Communication interface descriptor */ struct usb_epdesc_s epintindesc; /* Interrupt endpoint descriptor */ struct usb_ifdesc_s data_ifdesc; /* Data interface descriptor */ struct usb_epdesc_s epbulkindesc; /* Bulk in interface descriptor */ struct usb_epdesc_s epbulkoutdesc; /* Bulk out interface descriptor */ }; /* RNDIS object ID - value pair structure */ struct rndis_oid_value_s { uint32_t objid; uint32_t length; uint32_t value; FAR const void *data; /* Data pointer overrides value if non-NULL. */ }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* Netdev driver callbacks */ static int rndis_ifup(FAR struct net_driver_s *dev); static int rndis_ifdown(FAR struct net_driver_s *dev); static int rndis_txavail(FAR struct net_driver_s *dev); static int rndis_transmit(FAR struct rndis_dev_s *priv); static int rndis_txpoll(FAR struct net_driver_s *dev); static void rndis_polltimer(wdparm_t arg); /* usbclass callbacks */ static int usbclass_setup(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev, FAR const struct usb_ctrlreq_s *ctrl, FAR uint8_t *dataout, size_t outlen); static int usbclass_bind(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev); static void usbclass_unbind(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev); static void usbclass_disconnect(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev); static int usbclass_setconfig(FAR struct rndis_dev_s *priv, uint8_t config); static void usbclass_resetconfig(FAR struct rndis_dev_s *priv); /* usbclass helpers */ static int usbclass_copy_epdesc(int epid, FAR struct usb_epdesc_s *epdesc, FAR struct usbdev_devinfo_s *devinfo, bool hispeed); /**************************************************************************** * Private Data ****************************************************************************/ /* USB driver operations */ const static struct usbdevclass_driverops_s g_driverops = { &usbclass_bind, &usbclass_unbind, &usbclass_setup, &usbclass_disconnect, NULL, NULL }; #ifndef CONFIG_RNDIS_COMPOSITE static const struct usb_devdesc_s g_devdesc = { USB_SIZEOF_DEVDESC, /* len */ USB_DESC_TYPE_DEVICE, /* type */ {LSBYTE(0x0200), MSBYTE(0x0200)}, /* usb */ 0, /* classid */ 0, /* subclass */ 0, /* protocol */ CONFIG_RNDIS_EP0MAXPACKET, /* maxpacketsize */ { LSBYTE(CONFIG_RNDIS_VENDORID), /* vendor */ MSBYTE(CONFIG_RNDIS_VENDORID) }, { LSBYTE(CONFIG_RNDIS_PRODUCTID), /* product */ MSBYTE(CONFIG_RNDIS_PRODUCTID) }, { LSBYTE(CONFIG_RNDIS_VERSIONNO), /* device */ MSBYTE(CONFIG_RNDIS_VERSIONNO) }, RNDIS_MANUFACTURERSTRID, /* imfgr */ RNDIS_PRODUCTSTRID, /* iproduct */ RNDIS_SERIALSTRID, /* serno */ RNDIS_NCONFIGS /* nconfigs */ }; #endif const static struct rndis_cfgdesc_s g_rndis_cfgdesc = { #ifndef CONFIG_RNDIS_COMPOSITE { .len = USB_SIZEOF_CFGDESC, .type = USB_DESC_TYPE_CONFIG, .totallen = { 0, 0 }, .ninterfaces = RNDIS_NINTERFACES, .cfgvalue = RNDIS_CONFIGID, .icfg = 0, .attr = USB_CONFIG_ATTR_ONE | USB_CONFIG_ATTR_SELFPOWER, .mxpower = (CONFIG_USBDEV_MAXPOWER + 1) / 2 }, #endif { .len = USB_SIZEOF_IADDESC, .type = USB_DESC_TYPE_INTERFACEASSOCIATION, .firstif = 0, .nifs = RNDIS_NINTERFACES, .classid = 0xef, .subclass = 0x04, .protocol = 0x01, .ifunction = 0 }, { .len = USB_SIZEOF_IFDESC, .type = USB_DESC_TYPE_INTERFACE, .ifno = 0, .alt = 0, .neps = 1, .classid = USB_CLASS_CDC, .subclass = CDC_SUBCLASS_ACM, .protocol = CDC_PROTO_VENDOR, .iif = 0 }, { .len = USB_SIZEOF_EPDESC, .type = USB_DESC_TYPE_ENDPOINT, .addr = RNDIS_EPINTIN_ADDR, .attr = USB_EP_ATTR_XFER_INT, .mxpacketsize = { LSBYTE(16), MSBYTE(16) }, .interval = 1 }, { .len = USB_SIZEOF_IFDESC, .type = USB_DESC_TYPE_INTERFACE, .ifno = 1, .alt = 0, .neps = 2, .classid = USB_CLASS_CDC_DATA, .subclass = 0, .protocol = 0, .iif = 0 }, { .len = USB_SIZEOF_EPDESC, .type = USB_DESC_TYPE_ENDPOINT, .addr = RNDIS_EPBULKIN_ADDR, .attr = USB_EP_ATTR_XFER_BULK, #ifdef CONFIG_USBDEV_DUALSPEED .mxpacketsize = { LSBYTE(512), MSBYTE(512) }, .interval = 0 #else .mxpacketsize = { LSBYTE(64), MSBYTE(64) }, .interval = 1 #endif }, { .len = USB_SIZEOF_EPDESC, .type = USB_DESC_TYPE_ENDPOINT, .addr = RNDIS_EPBULKOUT_ADDR, .attr = USB_EP_ATTR_XFER_BULK, #ifdef CONFIG_USBDEV_DUALSPEED .mxpacketsize = { LSBYTE(512), MSBYTE(512) }, .interval = 0 #else .mxpacketsize = { LSBYTE(64), MSBYTE(64) }, .interval = 1 #endif } }; /* Default MAC address given to the host side of the interface. */ static uint8_t g_rndis_default_mac_addr[6] = { 0x02, 0x00, 0x00, 0x11, 0x22, 0x33 }; /* These lists give dummy responses to be returned to PC. The values are * chosen so that Windows is happy - other operating systems don't really * care much. */ static const uint32_t g_rndis_supported_oids[] = { RNDIS_OID_GEN_SUPPORTED_LIST, RNDIS_OID_GEN_HARDWARE_STATUS, RNDIS_OID_GEN_MEDIA_SUPPORTED, RNDIS_OID_GEN_MEDIA_IN_USE, RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE, RNDIS_OID_GEN_LINK_SPEED, RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE, RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE, RNDIS_OID_GEN_VENDOR_ID, RNDIS_OID_GEN_VENDOR_DESCRIPTION, RNDIS_OID_GEN_VENDOR_DRIVER_VERSION, RNDIS_OID_GEN_CURRENT_PACKET_FILTER, RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE, RNDIS_OID_GEN_MEDIA_CONNECT_STATUS, RNDIS_OID_GEN_PHYSICAL_MEDIUM, RNDIS_OID_GEN_XMIT_OK, RNDIS_OID_GEN_RCV_OK, RNDIS_OID_GEN_XMIT_ERROR, RNDIS_OID_GEN_RCV_ERROR, RNDIS_OID_GEN_RCV_NO_BUFFER, RNDIS_OID_802_3_PERMANENT_ADDRESS, RNDIS_OID_802_3_CURRENT_ADDRESS, RNDIS_OID_802_3_MULTICAST_LIST, RNDIS_OID_802_3_MAC_OPTIONS, RNDIS_OID_802_3_MAXIMUM_LIST_SIZE, RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT, RNDIS_OID_802_3_XMIT_ONE_COLLISION, RNDIS_OID_802_3_XMIT_MORE_COLLISION, }; static const struct rndis_oid_value_s g_rndis_oid_values[] = { { RNDIS_OID_GEN_SUPPORTED_LIST, sizeof(g_rndis_supported_oids), 0, g_rndis_supported_oids }, {RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE, 4, CONFIG_NET_ETH_PKTSIZE, NULL}, #ifdef CONFIG_USBDEV_DUALSPEED {RNDIS_OID_GEN_LINK_SPEED, 4, 100000, NULL}, #else {RNDIS_OID_GEN_LINK_SPEED, 4, 2000000, NULL}, #endif {RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE, 4, CONFIG_NET_ETH_PKTSIZE, NULL}, {RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE, 4, CONFIG_NET_ETH_PKTSIZE, NULL}, {RNDIS_OID_GEN_VENDOR_ID, 4, 0x00ffffff, NULL}, {RNDIS_OID_GEN_VENDOR_DESCRIPTION, 6, 0, "RNDIS"}, {RNDIS_OID_GEN_CURRENT_PACKET_FILTER, 4, 0, NULL}, {RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE, 4, 2048, NULL}, {RNDIS_OID_GEN_XMIT_OK, 4, 0, NULL}, {RNDIS_OID_GEN_RCV_OK, 4, 0, NULL}, {RNDIS_OID_802_3_PERMANENT_ADDRESS, 6, 0, NULL}, {RNDIS_OID_802_3_CURRENT_ADDRESS, 6, 0, NULL}, {RNDIS_OID_802_3_MULTICAST_LIST, 4, 0xe0000000, NULL}, {RNDIS_OID_802_3_MAXIMUM_LIST_SIZE, 4, 1, NULL}, {0x0, 4, 0, NULL}, /* Default fallback */ }; /**************************************************************************** * Private Data ****************************************************************************/ /**************************************************************************** * Buffering of data is implemented in the following manner: * * RNDIS driver holds a number of preallocated bulk IN endpoint write * requests along with buffers large enough to hold an Ethernet packet and * the corresponding RNDIS header. * * One of these is always reserved for packet reception - when data arrives * on the bulk OUT endpoint, it is copied to the reserved request buffer. * When the reception of an Ethernet packet is complete, a worker to process * the packet is scheduled and bulk OUT endpoint is set to NAK. * * The processing worker passes the buffer to the network. When the network * is done processing the packet, the buffer might contain data to be sent. * If so, the corresponding write request is queued on the bulk IN endpoint. * The NAK state on bulk OUT endpoint is cleared to allow new packets to * arrive. If there's no data to send, the request is returned to the list of * free requests. * * When a bulk IN write operation is complete, the request is added to the * list of free requests. * ****************************************************************************/ /**************************************************************************** * Name: rndis_submit_rdreq * * Description: * Submits the bulk OUT read request. Takes care not to submit the request * when the RX packet buffer is already in use. * * Input Parameters: * priv: pointer to RNDIS device driver structure * * Returned Value: * The return value of the EP_SUBMIT operation * ****************************************************************************/ static int rndis_submit_rdreq(FAR struct rndis_dev_s *priv) { irqstate_t flags = enter_critical_section(); int ret = OK; if (!priv->rdreq_submitted && !priv->rx_blocked) { priv->rdreq->len = priv->epbulkout->maxpacket; ret = EP_SUBMIT(priv->epbulkout, priv->rdreq); if (ret != OK) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDSUBMIT), (uint16_t)-priv->rdreq->result); } else { priv->rdreq_submitted = true; } } leave_critical_section(flags); return ret; } /**************************************************************************** * Name: rndis_cancel_rdreq * * Description: * Cancels the bulk OUT endpoint read request. * * Input Parameters: * priv: pointer to RNDIS device driver structure * ****************************************************************************/ static void rndis_cancel_rdreq(FAR struct rndis_dev_s *priv) { irqstate_t flags = enter_critical_section(); if (priv->rdreq_submitted) { EP_CANCEL(priv->epbulkout, priv->rdreq); priv->rdreq_submitted = false; } leave_critical_section(flags); } /**************************************************************************** * Name: rndis_block_rx * * Description: * Blocks reception of further bulk OUT endpoint data. * * Input Parameters: * priv: pointer to RNDIS device driver structure * ****************************************************************************/ static void rndis_block_rx(FAR struct rndis_dev_s *priv) { irqstate_t flags = enter_critical_section(); priv->rx_blocked = true; rndis_cancel_rdreq(priv); leave_critical_section(flags); } /**************************************************************************** * Name: rndis_unblock_rx * * Description: * Unblocks reception of bulk OUT endpoint data. * * Input Parameters: * priv: pointer to RNDIS device driver structure * * Assumptions: * Called from critical section * ****************************************************************************/ static void rndis_unblock_rx(FAR struct rndis_dev_s *priv) { priv->rx_blocked = false; } /**************************************************************************** * Name: rndis_allocwrreq * * Description: * Allocates a bulk IN endpoint request from the list of free request * buffers. * * Input Parameters: * priv: pointer to RNDIS device driver structure * * Returned Value: * NULL if allocation failed; pointer to allocated request if succeeded * * Assumptions: * Called from critical section * ****************************************************************************/ static FAR struct rndis_req_s *rndis_allocwrreq(FAR struct rndis_dev_s *priv) { return (FAR struct rndis_req_s *)sq_remfirst(&priv->reqlist); } /**************************************************************************** * Name: rndis_hasfreereqs * * Description: * Checks if there are free requests usable for TX data. * * Input Parameters: * priv: pointer to RNDIS device driver structure * * Returned Value: * true if requests available; false if no requests available * * Assumptions: * Called from critical section * ****************************************************************************/ static bool rndis_hasfreereqs(FAR struct rndis_dev_s *priv) { return sq_count(&priv->reqlist) > 1; } /**************************************************************************** * Name: rndis_freewrreq * * Description: * Returns a bulk IN endpoint write requests to the list of free requests. * * Input Parameters: * priv: pointer to RNDIS device driver structure * req: pointer to the request * * Assumptions: * Called with interrupts disabled. * ****************************************************************************/ static void rndis_freewrreq(FAR struct rndis_dev_s *priv, FAR struct rndis_req_s *req) { DEBUGASSERT(req != NULL); sq_addlast((FAR sq_entry_t *)req, &priv->reqlist); rndis_submit_rdreq(priv); } /**************************************************************************** * Name: rndis_allocnetreq * * Description: * Allocates a request buffer to be used on the network. * * Input Parameters: * priv: pointer to RNDIS device driver structure * * Returned Value: * true if succeeded; false if failed * * Assumptions: * Caller holds the network lock * ****************************************************************************/ static bool rndis_allocnetreq(FAR struct rndis_dev_s *priv) { irqstate_t flags = enter_critical_section(); DEBUGASSERT(priv->net_req == NULL); if (!rndis_hasfreereqs(priv)) { leave_critical_section(flags); return false; } priv->net_req = rndis_allocwrreq(priv); if (priv->net_req) { priv->netdev.d_buf = &priv->net_req->req->buf[RNDIS_PACKET_HDR_SIZE]; priv->netdev.d_len = CONFIG_NET_ETH_PKTSIZE; } leave_critical_section(flags); return priv->net_req != NULL; } /**************************************************************************** * Name: rndis_sendnetreq * * Description: * Submits the request buffer held by the network. * * Input Parameters: * priv: pointer to RNDIS device driver structure * * Assumptions: * Caller holds the network lock * ****************************************************************************/ static void rndis_sendnetreq(FAR struct rndis_dev_s *priv) { irqstate_t flags = enter_critical_section(); DEBUGASSERT(priv->net_req != NULL); priv->net_req->req->priv = priv->net_req; EP_SUBMIT(priv->epbulkin, priv->net_req->req); priv->net_req = NULL; priv->netdev.d_buf = NULL; priv->netdev.d_len = 0; leave_critical_section(flags); } /**************************************************************************** * Name: rndis_freenetreq * * Description: * Frees the request buffer held by the network. * * Input Parameters: * priv: pointer to RNDIS device driver structure * * Assumptions: * Caller holds the network lock * ****************************************************************************/ static void rndis_freenetreq(FAR struct rndis_dev_s *priv) { irqstate_t flags = enter_critical_section(); rndis_freewrreq(priv, priv->net_req); priv->net_req = NULL; priv->netdev.d_buf = NULL; priv->netdev.d_len = 0; leave_critical_section(flags); } /**************************************************************************** * Name: rndis_allocrxreq * * Description: * Allocates a buffer for packet reception if there already isn't one. * * Input Parameters: * priv: pointer to RNDIS device driver structure * * Returned Value: * true if succeeded; false if failed * * Assumptions: * Called from critical section * ****************************************************************************/ static bool rndis_allocrxreq(FAR struct rndis_dev_s *priv) { if (priv->rx_req != NULL) { return true; } priv->rx_req = rndis_allocwrreq(priv); return priv->rx_req != NULL; } /**************************************************************************** * Name: rndis_giverxreq * * Description: * Passes the RX packet buffer to the network * * Input Parameters: * priv: pointer to RNDIS device driver structure * * Assumptions: * Caller holds the network lock * ****************************************************************************/ static void rndis_giverxreq(FAR struct rndis_dev_s *priv) { DEBUGASSERT(priv->rx_req != NULL); DEBUGASSERT(priv->net_req == NULL); priv->net_req = priv->rx_req; priv->netdev.d_buf = &priv->net_req->req->buf[RNDIS_PACKET_HDR_SIZE]; priv->netdev.d_len = CONFIG_NET_ETH_PKTSIZE; priv->rx_req = NULL; } /**************************************************************************** * Name: rndis_fillrequest * * Description: * Fills the RNDIS header to the request buffer * * Input Parameters: * priv: pointer to RNDIS device driver structure * req: the request whose buffer we should fill * * Returned Value: * The total length of the request data * * Assumptions: * Caller holds the network lock * ****************************************************************************/ static uint16_t rndis_fillrequest(FAR struct rndis_dev_s *priv, FAR struct usbdev_req_s *req) { size_t datalen; req->len = 0; datalen = min(priv->netdev.d_len, CONFIG_RNDIS_BULKIN_REQLEN - RNDIS_PACKET_HDR_SIZE); if (datalen > 0) { /* Send the required headers */ FAR struct rndis_packet_msg *msg = (FAR struct rndis_packet_msg *)req->buf; memset(msg, 0, RNDIS_PACKET_HDR_SIZE); msg->msgtype = RNDIS_PACKET_MSG; msg->msglen = RNDIS_PACKET_HDR_SIZE + datalen; msg->dataoffset = RNDIS_PACKET_HDR_SIZE - 8; msg->datalen = datalen; req->flags = USBDEV_REQFLAGS_NULLPKT; req->len = datalen + RNDIS_PACKET_HDR_SIZE; } return req->len; } /**************************************************************************** * Name: rndis_rxdispatch * * Description: * Processes the received Ethernet packet. Called from work queue. * * Input Parameters: * arg: pointer to RNDIS device driver structure * ****************************************************************************/ static void rndis_rxdispatch(FAR void *arg) { FAR struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)arg; FAR struct eth_hdr_s *hdr; irqstate_t flags; net_lock(); flags = enter_critical_section(); rndis_giverxreq(priv); priv->netdev.d_len = priv->current_rx_datagram_size; leave_critical_section(flags); hdr = (FAR struct eth_hdr_s *)priv->netdev.d_buf; /* We only accept IP packets of the configured type and ARP packets */ #ifdef CONFIG_NET_IPv4 if (hdr->type == HTONS(ETHTYPE_IP)) { NETDEV_RXIPV4(&priv->netdev); /* Handle ARP on input then give the IPv4 packet to the network * layer */ arp_ipin(&priv->netdev); ipv4_input(&priv->netdev); if (priv->netdev.d_len > 0) { /* Update the Ethernet header with the correct MAC address */ #ifdef CONFIG_NET_IPv6 if (IFF_IS_IPv4(priv->netdev.d_flags)) #endif { arp_out(&priv->netdev); } #ifdef CONFIG_NET_IPv6 else { neighbor_out(&priv->netdev); } #endif /* And send the packet */ rndis_transmit(priv); } } else #endif #ifdef CONFIG_NET_IPv6 if (hdr->type == HTONS(ETHTYPE_IP6)) { NETDEV_RXIPV6(&priv->netdev); /* Give the IPv6 packet to the network layer */ arp_ipin(&priv->netdev); ipv6_input(&priv->netdev); if (priv->netdev.d_len > 0) { /* Update the Ethernet header with the correct MAC address */ #ifdef CONFIG_NET_IPv4 if (IFF_IS_IPv4(priv->netdev.d_flags)) { arp_out(&priv->netdev); } else #endif #ifdef CONFIG_NET_IPv6 { neighbor_out(&priv->netdev); } #endif /* And send the packet */ rndis_transmit(priv); } } else #endif #ifdef CONFIG_NET_ARP if (hdr->type == htons(ETHTYPE_ARP)) { NETDEV_RXARP(&priv->netdev); arp_arpin(&priv->netdev); if (priv->netdev.d_len > 0) { rndis_transmit(priv); } } else #endif { uerr("ERROR: Unsupported packet type dropped (%02x)\n", htons(hdr->type)); NETDEV_RXDROPPED(&priv->netdev); priv->netdev.d_len = 0; } priv->current_rx_datagram_size = 0; rndis_unblock_rx(priv); if (priv->net_req != NULL) { rndis_freenetreq(priv); } net_unlock(); } /**************************************************************************** * Name: rndis_txpoll * * Description: * Sends the packet that is stored in the network packet buffer. Called * from work queue by e.g. txavail and txpoll callbacks. * * Input Parameters: * dev: pointer to network driver structure * * Assumptions: * Caller holds the network lock * ****************************************************************************/ static int rndis_txpoll(FAR struct net_driver_s *dev) { FAR struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)dev->d_private; int ret = OK; if (!priv->connected) { return -EBUSY; } /* If the polling resulted in data that should be sent out on the network, * the field d_len is set to a value > 0. */ ninfo("Poll result: d_len=%d\n", priv->netdev.d_len); if (priv->netdev.d_len > 0) { /* Look up the destination MAC address and add it to the Ethernet * header. */ #ifdef CONFIG_NET_IPv4 #ifdef CONFIG_NET_IPv6 if (IFF_IS_IPv4(priv->netdev.d_flags)) #endif { arp_out(&priv->netdev); } #endif /* CONFIG_NET_IPv4 */ #ifdef CONFIG_NET_IPv6 #ifdef CONFIG_NET_IPv4 else #endif { neighbor_out(&priv->netdev); } #endif /* CONFIG_NET_IPv6 */ if (!devif_loopback(&priv->netdev)) { ret = rndis_transmit(priv); } } /* If zero is returned, the polling will continue until all connections * have been examined. */ return ret; } /**************************************************************************** * Name: rndis_transmit * * Description: * Start hardware transmission. * ****************************************************************************/ static int rndis_transmit(FAR struct rndis_dev_s *priv) { int ret = OK; /* Queue the packet */ rndis_fillrequest(priv, priv->net_req->req); rndis_sendnetreq(priv); if (!rndis_allocnetreq(priv)) { ret = -EBUSY; } return ret; } /**************************************************************************** * Name: rndis_pollworker * * Description: * Worker function called by txpoll worker. * ****************************************************************************/ static void rndis_pollworker(FAR void *arg) { FAR struct rndis_dev_s *priv = (struct rndis_dev_s *)arg; DEBUGASSERT(priv != NULL); net_lock(); if (rndis_allocnetreq(priv)) { devif_timer(&priv->netdev, RNDIS_WDDELAY, rndis_txpoll); if (priv->net_req != NULL) { rndis_freenetreq(priv); } } net_unlock(); } /**************************************************************************** * Name: rndis_polltimer * * Description: * Network poll watchdog timer callback * ****************************************************************************/ static void rndis_polltimer(wdparm_t arg) { FAR struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)arg; int ret; if (work_available(&priv->pollwork)) { ret = work_queue(ETHWORK, &priv->pollwork, rndis_pollworker, (FAR void *)priv, 0); DEBUGASSERT(ret == OK); UNUSED(ret); } /* Setup the watchdog poll timer again */ wd_start(&priv->txpoll, RNDIS_WDDELAY, rndis_polltimer, (wdparm_t)arg); } /**************************************************************************** * Name: rndis_ifup * * Description: * Network ifup callback * ****************************************************************************/ static int rndis_ifup(FAR struct net_driver_s *dev) { FAR struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)dev->d_private; wd_start(&priv->txpoll, RNDIS_WDDELAY, rndis_polltimer, (wdparm_t)priv); return OK; } /**************************************************************************** * Name: rndis_ifdown * * Description: * Network ifdown callback * ****************************************************************************/ static int rndis_ifdown(FAR struct net_driver_s *dev) { FAR struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)dev->d_private; wd_cancel(&priv->txpoll); return OK; } /**************************************************************************** * Name: rndis_txavail_work * * Description: * txavail worker function * ****************************************************************************/ static void rndis_txavail_work(FAR void *arg) { FAR struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)arg; net_lock(); if (rndis_allocnetreq(priv)) { devif_timer(&priv->netdev, 0, rndis_txpoll); if (priv->net_req != NULL) { rndis_freenetreq(priv); } } net_unlock(); } /**************************************************************************** * Name: rndis_txavail * * Description: * Network txavail callback that's called when there are buffers available * for sending data. May be called from an interrupt, so we must queue a * worker to do the actual processing. * ****************************************************************************/ static int rndis_txavail(FAR struct net_driver_s *dev) { FAR struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)dev->d_private; if (work_available(&priv->pollwork)) { work_queue(ETHWORK, &priv->pollwork, rndis_txavail_work, priv, 0); } return OK; } /**************************************************************************** * Name: rndis_recvpacket * * Description: * Handles a USB packet arriving on the data bulk out endpoint. * * Assumptions: * Called from the USB interrupt handler with interrupts disabled. * ****************************************************************************/ static inline int rndis_recvpacket(FAR struct rndis_dev_s *priv, FAR uint8_t *reqbuf, uint16_t reqlen) { if (!rndis_allocrxreq(priv)) { return -ENOMEM; } if (!priv->connected) { return -EBUSY; } if (!priv->current_rx_datagram_size) { if (reqlen < 16) { /* Packet too small to contain a message header */ } else { /* The packet contains a RNDIS packet message header */ FAR struct rndis_packet_msg *msg = (FAR struct rndis_packet_msg *)reqbuf; if (msg->msgtype == RNDIS_PACKET_MSG) { priv->current_rx_received = reqlen; priv->current_rx_datagram_size = msg->datalen; priv->current_rx_msglen = msg->msglen; /* According to RNDIS-over-USB send, if the message length is a * multiple of endpoint max packet size, the host must send an * additional single-byte zero packet. Take that in account * here. */ if (!(priv->current_rx_msglen % priv->epbulkout->maxpacket)) { priv->current_rx_msglen += 1; } /* Data offset is defined as an offset from the beginning of * the offset field itself */ priv->current_rx_datagram_offset = msg->dataoffset + 8; if (priv->current_rx_datagram_offset < reqlen) { memcpy(&priv->rx_req->req->buf[RNDIS_PACKET_HDR_SIZE], &reqbuf[priv->current_rx_datagram_offset], reqlen - priv->current_rx_datagram_offset); } } else { uerr("Unknown RNDIS message type %" PRIu32 "\n", msg->msgtype); } } } else { if (priv->current_rx_received >= priv->current_rx_datagram_offset && priv->current_rx_received <= priv->current_rx_datagram_size + priv->current_rx_datagram_offset) { size_t index = priv->current_rx_received - priv->current_rx_datagram_offset; size_t copysize = min(reqlen, priv->current_rx_datagram_size - index); /* Check if the received packet exceeds request buffer */ if ((index + copysize) <= CONFIG_NET_ETH_PKTSIZE) { memcpy(&priv->rx_req->req->buf[RNDIS_PACKET_HDR_SIZE + index], reqbuf, copysize); } else { uerr("The packet exceeds request buffer (reqlen=%d) \n", reqlen); } } priv->current_rx_received += reqlen; } if (priv->current_rx_received >= priv->current_rx_msglen) { /* Check for a usable packet length (4 added for the CRC) */ if (priv->current_rx_datagram_size > (CONFIG_NET_ETH_PKTSIZE + 4) || priv->current_rx_datagram_size <= (ETH_HDRLEN + 4)) { uerr("ERROR: Bad packet size dropped (%d)\n", priv->current_rx_datagram_size); NETDEV_RXERRORS(&priv->netdev); priv->current_rx_datagram_size = 0; } else { int ret; DEBUGASSERT(work_available(&priv->rxwork)); ret = work_queue(ETHWORK, &priv->rxwork, rndis_rxdispatch, priv, 0); DEBUGASSERT(ret == 0); UNUSED(ret); rndis_block_rx(priv); priv->rndis_host_tx_count++; return -EBUSY; } } return OK; } /**************************************************************************** * Name: rndis_prepare_response * * Description: * Passes the RX packet buffer to the network * * Input Parameters: * priv: pointer to RNDIS device driver structure * * Assumptions: * Called from critical section * ****************************************************************************/ static bool rndis_prepare_response(FAR struct rndis_dev_s *priv, size_t size, FAR struct rndis_command_header *request_hdr) { FAR struct rndis_response_header *hdr = (FAR struct rndis_response_header *)priv->ctrlreq->buf; hdr->msgtype = request_hdr->msgtype | RNDIS_MSG_COMPLETE; hdr->msglen = size; hdr->reqid = request_hdr->reqid; hdr->status = RNDIS_STATUS_SUCCESS; priv->ctrlreq_has_encap_response = true; return true; } /**************************************************************************** * Name: rndis_send_encapsulated_response * * Description: * Give a notification to the host that there is an encapsulated response * available. * * Input Parameters: * priv: pointer to RNDIS device driver structure * * Assumptions: * Called from critical section * ****************************************************************************/ static int rndis_send_encapsulated_response(FAR struct rndis_dev_s *priv) { FAR struct rndis_notification *notif = (FAR struct rndis_notification *)priv->epintin_req->buf; notif->notification = RNDIS_NOTIFICATION_RESPONSE_AVAILABLE; notif->reserved = 0; priv->epintin_req->len = sizeof(struct rndis_notification); EP_CANCEL(priv->epintin, priv->epintin_req); EP_SUBMIT(priv->epintin, priv->epintin_req); return OK; } /**************************************************************************** * Name: rndis_handle_control_message * * Description: * Handle a RNDIS control message. * * Input Parameters: * priv: pointer to RNDIS device driver structure * * Assumptions: * Called from critical section * ****************************************************************************/ static int rndis_handle_control_message(FAR struct rndis_dev_s *priv, FAR uint8_t *dataout, uint16_t outlen) { FAR struct rndis_command_header *cmd_hdr = (FAR struct rndis_command_header *)dataout; switch (cmd_hdr->msgtype) { case RNDIS_INITIALIZE_MSG: { FAR struct rndis_initialize_cmplt *resp; rndis_prepare_response(priv, sizeof(struct rndis_initialize_cmplt), cmd_hdr); resp = (FAR struct rndis_initialize_cmplt *)priv->ctrlreq->buf; resp->major = RNDIS_MAJOR_VERSION; resp->minor = RNDIS_MINOR_VERSION; resp->devflags = RNDIS_DEVICEFLAGS; resp->medium = RNDIS_MEDIUM_802_3; resp->pktperxfer = 1; resp->xfrsize = (4 + 44 + 22) + RNDIS_BUFFER_SIZE; resp->pktalign = 2; rndis_send_encapsulated_response(priv); } break; case RNDIS_HALT_MSG: { priv->connected = false; } break; case RNDIS_QUERY_MSG: { int i; size_t max_reply_size = sizeof(struct rndis_query_cmplt) + sizeof(g_rndis_supported_oids); rndis_prepare_response(priv, max_reply_size, cmd_hdr); FAR struct rndis_query_msg *req = (FAR struct rndis_query_msg *)dataout; FAR struct rndis_query_cmplt *resp = (FAR struct rndis_query_cmplt *)priv->ctrlreq->buf; resp->hdr.msglen = sizeof(struct rndis_query_cmplt); resp->bufoffset = 0; resp->buflen = 0; resp->hdr.status = RNDIS_STATUS_NOT_SUPPORTED; for (i = 0; i < sizeof(g_rndis_oid_values) / sizeof(g_rndis_oid_values[0]); i++) { bool match = (g_rndis_oid_values[i].objid == req->objid); if (!match && g_rndis_oid_values[i].objid == 0) { int j; /* Check whether to apply the fallback entry */ for (j = 0; j < sizeof(g_rndis_supported_oids) / sizeof(uint32_t); j++) { if (g_rndis_supported_oids[j] == req->objid) { match = true; break; } } } if (match) { resp->hdr.status = RNDIS_STATUS_SUCCESS; resp->bufoffset = 16; resp->buflen = g_rndis_oid_values[i].length; if (req->objid == RNDIS_OID_GEN_CURRENT_PACKET_FILTER) { resp->buffer[0] = priv->rndis_packet_filter; } else if (req->objid == RNDIS_OID_GEN_XMIT_OK) { resp->buffer[0] = priv->rndis_host_tx_count; } else if (req->objid == RNDIS_OID_GEN_RCV_OK) { resp->buffer[0] = priv->rndis_host_rx_count; } else if (req->objid == RNDIS_OID_802_3_CURRENT_ADDRESS || req->objid == RNDIS_OID_802_3_PERMANENT_ADDRESS) { memcpy(resp->buffer, priv->host_mac_address, 6); } else if (g_rndis_oid_values[i].data) { memcpy(resp->buffer, g_rndis_oid_values[i].data, resp->buflen); } else { memcpy(resp->buffer, &g_rndis_oid_values[i].value, resp->buflen); } break; } } uinfo("RNDIS Query RID=%08x OID=%08x LEN=%d DAT=%08x", (unsigned)req->hdr.reqid, (unsigned)req->objid, (int)resp->buflen, (unsigned)resp->buffer[0]); resp->hdr.msglen += resp->buflen; rndis_send_encapsulated_response(priv); } break; case RNDIS_SET_MSG: { FAR struct rndis_set_msg *req; FAR struct rndis_response_header *resp; rndis_prepare_response(priv, sizeof(struct rndis_response_header), cmd_hdr); req = (FAR struct rndis_set_msg *)dataout; resp = (FAR struct rndis_response_header *)priv->ctrlreq->buf; uinfo("RNDIS SET RID=%08x OID=%08x LEN=%d DAT=%08x", (unsigned)req->hdr.reqid, (unsigned)req->objid, (int)req->buflen, (unsigned)req->buffer[0]); if (req->objid == RNDIS_OID_GEN_CURRENT_PACKET_FILTER) { priv->rndis_packet_filter = req->buffer[0]; if (req->buffer[0] == 0) { priv->connected = false; } else { uinfo("RNDIS is now connected"); priv->connected = true; } } else if (req->objid == RNDIS_OID_802_3_MULTICAST_LIST) { uinfo("RNDIS multicast list ignored"); } else { uinfo("RNDIS unsupported set %08x", (unsigned)req->objid); resp->status = RNDIS_STATUS_NOT_SUPPORTED; } rndis_send_encapsulated_response(priv); } break; case RNDIS_RESET_MSG: { FAR struct rndis_reset_cmplt *resp; rndis_prepare_response(priv, sizeof(struct rndis_reset_cmplt), cmd_hdr); resp = (FAR struct rndis_reset_cmplt *)priv->ctrlreq->buf; resp->addreset = 0; priv->connected = false; rndis_send_encapsulated_response(priv); } break; case RNDIS_KEEPALIVE_MSG: { rndis_prepare_response(priv, sizeof(struct rndis_response_header), cmd_hdr); rndis_send_encapsulated_response(priv); } break; default: uwarn("Unsupported RNDIS control message: %" PRIu32 "\n", cmd_hdr->msgtype); } return OK; } /**************************************************************************** * Name: rndis_rdcomplete * * Description: * Handle completion of read request on the bulk OUT endpoint. * ****************************************************************************/ static void rndis_rdcomplete(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req) { FAR struct rndis_dev_s *priv; irqstate_t flags; int ret; /* Sanity check */ #ifdef CONFIG_DEBUG_FEATURES if (!ep || !ep->priv || !req) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0); return; } #endif /* Extract references to private data */ priv = (FAR struct rndis_dev_s *)ep->priv; /* Process the received data unless this is some unusual condition */ ret = OK; flags = enter_critical_section(); priv->rdreq_submitted = false; switch (req->result) { case 0: /* Normal completion */ ret = rndis_recvpacket(priv, req->buf, req->xfrd); DEBUGASSERT(ret != -ENOMEM); break; case -ESHUTDOWN: /* Disconnection */ usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDSHUTDOWN), 0); leave_critical_section(flags); return; default: /* Some other error occurred */ usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDUNEXPECTED), (uint16_t)-req->result); break; }; if (ret == OK) { rndis_submit_rdreq(priv); } leave_critical_section(flags); } /**************************************************************************** * Name: rndis_wrcomplete * * Description: * Handle completion of write request. This function probably executes * in the context of an interrupt handler. * ****************************************************************************/ static void rndis_wrcomplete(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req) { FAR struct rndis_dev_s *priv; FAR struct rndis_req_s *reqcontainer; irqstate_t flags; /* Sanity check */ #ifdef CONFIG_DEBUG_FEATURES if (!ep || !ep->priv || !req || !req->priv) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0); return; } #endif /* Extract references to our private data */ priv = (FAR struct rndis_dev_s *)ep->priv; reqcontainer = (FAR struct rndis_req_s *)req->priv; /* Return the write request to the free list */ flags = enter_critical_section(); rndis_freewrreq(priv, reqcontainer); if (rndis_hasfreereqs(priv)) { rndis_txavail(&priv->netdev); } switch (req->result) { case OK: /* Normal completion */ priv->rndis_host_rx_count++; break; case -ESHUTDOWN: /* Disconnection */ break; default: /* Some other error occurred */ usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_WRUNEXPECTED), (uint16_t)-req->result); break; } leave_critical_section(flags); } /**************************************************************************** * Name: usbclass_ep0incomplete * * Description: * Handle completion of EP0 control operations * ****************************************************************************/ static void usbclass_ep0incomplete(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req) { if (req->result || req->xfrd != req->len) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_REQRESULT), (uint16_t)-req->result); } else if (req->len > 0) { struct rndis_dev_s *priv = (FAR struct rndis_dev_s *)ep->priv; priv->ctrlreq_has_encap_response = false; } } /**************************************************************************** * Name: usbclass_ep0incomplete * * Description: * Handle completion of interrupt IN endpoint operations * ****************************************************************************/ static void usbclass_epintin_complete(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req) { if (req->result || req->xfrd != req->len) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_REQRESULT), (uint16_t)-req->result); } } /**************************************************************************** * Name: usbclass_freereq * * Description: * Free a request instance along with its buffer * ****************************************************************************/ static void usbclass_freereq(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req) { if (ep != NULL && req != NULL) { if (req->buf != NULL) { EP_FREEBUFFER(ep, req->buf); } EP_FREEREQ(ep, req); } } /**************************************************************************** * Name: usbclass_allocreq * * Description: * Allocate a request instance along with its buffer * ****************************************************************************/ static FAR struct usbdev_req_s *usbclass_allocreq(FAR struct usbdev_ep_s *ep, uint16_t len) { FAR struct usbdev_req_s *req; req = EP_ALLOCREQ(ep); if (req != NULL) { req->len = len; req->buf = EP_ALLOCBUFFER(ep, len); if (req->buf == NULL) { EP_FREEREQ(ep, req); req = NULL; } } return req; } /**************************************************************************** * Name: usbclass_mkstrdesc * * Description: * Construct a string descriptor * ****************************************************************************/ static int usbclass_mkstrdesc(uint8_t id, FAR struct usb_strdesc_s *strdesc) { FAR const char *str; int len; int ndata; int i; switch (id) { #ifndef CONFIG_RNDIS_COMPOSITE case 0: { /* Descriptor 0 is the language id */ strdesc->len = 4; strdesc->type = USB_DESC_TYPE_STRING; strdesc->data[0] = LSBYTE(RNDIS_STR_LANGUAGE); strdesc->data[1] = MSBYTE(RNDIS_STR_LANGUAGE); return 4; } case RNDIS_MANUFACTURERSTRID: str = CONFIG_RNDIS_VENDORSTR; break; case RNDIS_PRODUCTSTRID: str = CONFIG_RNDIS_PRODUCTSTR; break; case RNDIS_SERIALSTRID: str = CONFIG_RNDIS_SERIALSTR; break; #endif default: return -EINVAL; } /* The string is utf16-le. The poor man's utf-8 to utf16-le * conversion below will only handle 7-bit en-us ascii */ len = strlen(str); if (len > (RNDIS_MAXSTRLEN / 2)) { len = (RNDIS_MAXSTRLEN / 2); } for (i = 0, ndata = 0; i < len; i++, ndata += 2) { strdesc->data[ndata] = str[i]; strdesc->data[ndata + 1] = 0; } strdesc->len = ndata + 2; strdesc->type = USB_DESC_TYPE_STRING; return strdesc->len; } /**************************************************************************** * Name: usbclass_copy_epdesc * * Description: * Copies the requested Endpoint Description into the buffer given. * Returns the number of Bytes filled in ( sizeof(struct usb_epdesc_s) ). * ****************************************************************************/ static int usbclass_copy_epdesc(int epid, FAR struct usb_epdesc_s *epdesc, FAR struct usbdev_devinfo_s *devinfo, bool hispeed) { #ifndef CONFIG_USBDEV_DUALSPEED UNUSED(hispeed); #endif switch (epid) { case RNDIS_EP_INTIN_IDX: /* Interrupt IN endpoint */ { epdesc->len = USB_SIZEOF_EPDESC; /* Descriptor length */ epdesc->type = USB_DESC_TYPE_ENDPOINT; /* Descriptor type */ epdesc->addr = RNDIS_MKEPINTIN(devinfo); /* Endpoint address */ epdesc->attr = RNDIS_EPINTIN_ATTR; /* Endpoint attributes */ #ifdef CONFIG_USBDEV_DUALSPEED if (hispeed) { /* Maximum packet size (high speed) */ epdesc->mxpacketsize[0] = LSBYTE(CONFIG_RNDIS_EPINTIN_HSSIZE); epdesc->mxpacketsize[1] = MSBYTE(CONFIG_RNDIS_EPINTIN_HSSIZE); } else #endif { /* Maximum packet size (full speed) */ epdesc->mxpacketsize[0] = LSBYTE(CONFIG_RNDIS_EPINTIN_FSSIZE); epdesc->mxpacketsize[1] = MSBYTE(CONFIG_RNDIS_EPINTIN_FSSIZE); } epdesc->interval = 10; /* Interval */ } break; case RNDIS_EP_BULKOUT_IDX: /* Bulk OUT endpoint */ { epdesc->len = USB_SIZEOF_EPDESC; /* Descriptor length */ epdesc->type = USB_DESC_TYPE_ENDPOINT; /* Descriptor type */ epdesc->addr = RNDIS_MKEPBULKOUT(devinfo); /* Endpoint address */ epdesc->attr = RNDIS_EPOUTBULK_ATTR; /* Endpoint attributes */ #ifdef CONFIG_USBDEV_DUALSPEED if (hispeed) { /* Maximum packet size (high speed) */ epdesc->mxpacketsize[0] = LSBYTE(CONFIG_RNDIS_EPBULKOUT_HSSIZE); epdesc->mxpacketsize[1] = MSBYTE(CONFIG_RNDIS_EPBULKOUT_HSSIZE); } else #endif { /* Maximum packet size (full speed) */ epdesc->mxpacketsize[0] = LSBYTE(CONFIG_RNDIS_EPBULKOUT_FSSIZE); epdesc->mxpacketsize[1] = MSBYTE(CONFIG_RNDIS_EPBULKOUT_FSSIZE); } epdesc->interval = 0; /* Interval */ } break; case RNDIS_EP_BULKIN_IDX: /* Bulk IN endpoint */ { epdesc->len = USB_SIZEOF_EPDESC; /* Descriptor length */ epdesc->type = USB_DESC_TYPE_ENDPOINT; /* Descriptor type */ epdesc->addr = RNDIS_MKEPBULKIN(devinfo); /* Endpoint address */ epdesc->attr = RNDIS_EPINBULK_ATTR; /* Endpoint attributes */ #ifdef CONFIG_USBDEV_DUALSPEED if (hispeed) { /* Maximum packet size (high speed) */ epdesc->mxpacketsize[0] = LSBYTE(CONFIG_RNDIS_EPBULKIN_HSSIZE); epdesc->mxpacketsize[1] = MSBYTE(CONFIG_RNDIS_EPBULKIN_HSSIZE); } else #endif { /* Maximum packet size (full speed) */ epdesc->mxpacketsize[0] = LSBYTE(CONFIG_RNDIS_EPBULKIN_FSSIZE); epdesc->mxpacketsize[1] = MSBYTE(CONFIG_RNDIS_EPBULKIN_FSSIZE); } epdesc->interval = 0; /* Interval */ } break; default: return 0; } return sizeof(struct usb_epdesc_s); } /**************************************************************************** * Name: usbclass_mkcfgdesc * * Description: * Construct the configuration descriptor * ****************************************************************************/ static int16_t usbclass_mkcfgdesc(FAR uint8_t *buf, FAR struct usbdev_devinfo_s *devinfo) { FAR struct rndis_cfgdesc_s *dest = (FAR struct rndis_cfgdesc_s *)buf; uint16_t totallen; /* This is the total length of the configuration (not necessarily the * size that we will be sending now). */ totallen = sizeof(g_rndis_cfgdesc); memcpy(dest, &g_rndis_cfgdesc, totallen); #ifndef CONFIG_RNDIS_COMPOSITE /* For a stand-alone device, just fill in the total length */ dest->cfgdesc.totallen[0] = LSBYTE(totallen); dest->cfgdesc.totallen[1] = MSBYTE(totallen); #else /* For composite device, apply possible offset to the interface numbers */ dest->assoc_desc.firstif += devinfo->ifnobase; dest->comm_ifdesc.ifno += devinfo->ifnobase; dest->epintindesc.addr = USB_EPIN(devinfo->epno[RNDIS_EP_INTIN_IDX]); dest->data_ifdesc.ifno += devinfo->ifnobase; dest->epbulkindesc.addr = USB_EPIN(devinfo->epno[RNDIS_EP_BULKIN_IDX]); dest->epbulkoutdesc.addr = USB_EPOUT(devinfo->epno[RNDIS_EP_BULKOUT_IDX]); #endif return totallen; } /**************************************************************************** * Name: usbclass_bind * * Description: * Invoked when the driver is bound to a USB device driver * ****************************************************************************/ static int usbclass_bind(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev) { FAR struct rndis_dev_s *priv = ((FAR struct rndis_driver_s *)driver)->dev; FAR struct rndis_req_s *reqcontainer; irqstate_t flags; uint16_t reqlen; int ret; int i; usbtrace(TRACE_CLASSBIND, 0); /* Bind the structures */ priv->usbdev = dev; /* Save the reference to our private data structure in EP0 so that it * can be recovered in ep0 completion events (Unless we are part of * a composite device and, in that case, the composite device owns * EP0). */ dev->ep0->priv = priv; /* Preallocate control request */ priv->ctrlreq = usbclass_allocreq(dev->ep0, RNDIS_CTRLREQ_LEN); if (priv->ctrlreq == NULL) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_ALLOCCTRLREQ), 0); ret = -ENOMEM; goto errout; } priv->ctrlreq->callback = usbclass_ep0incomplete; /* Pre-allocate all endpoints... the endpoints will not be functional * until the SET CONFIGURATION request is processed in usbclass_setconfig. * This is done here because there may be calls to kmm_malloc and the SET * CONFIGURATION processing probably occurs within interrupt handling * logic where kmm_malloc calls will fail. */ /* Pre-allocate the IN interrupt endpoint */ priv->epintin = DEV_ALLOCEP(dev, USB_EPIN(priv->devinfo.epno[RNDIS_EP_INTIN_IDX]), true, USB_EP_ATTR_XFER_INT); if (!priv->epintin) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPINTINALLOCFAIL), 0); ret = -ENODEV; goto errout; } priv->epintin->priv = priv; priv->epintin_req = usbclass_allocreq(priv->epintin, sizeof(struct rndis_notification)); if (priv->epintin_req == NULL) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDALLOCREQ), -ENOMEM); ret = -ENOMEM; goto errout; } priv->epintin_req->callback = usbclass_epintin_complete; /* Pre-allocate the IN bulk endpoint */ priv->epbulkin = DEV_ALLOCEP(dev, USB_EPIN(priv->devinfo.epno[RNDIS_EP_BULKIN_IDX]), true, USB_EP_ATTR_XFER_BULK); if (!priv->epbulkin) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPBULKINALLOCFAIL), 0); ret = -ENODEV; goto errout; } priv->epbulkin->priv = priv; /* Pre-allocate the OUT bulk endpoint */ priv->epbulkout = DEV_ALLOCEP(dev, USB_EPOUT(priv->devinfo.epno[RNDIS_EP_BULKOUT_IDX]), false, USB_EP_ATTR_XFER_BULK); if (!priv->epbulkout) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPBULKOUTALLOCFAIL), 0); ret = -ENODEV; goto errout; } priv->epbulkout->priv = priv; /* Pre-allocate read requests. The buffer size is one full packet. */ reqlen = 64; if (CONFIG_RNDIS_BULKOUT_REQLEN > reqlen) { reqlen = CONFIG_RNDIS_BULKOUT_REQLEN; } priv->rdreq = usbclass_allocreq(priv->epbulkout, reqlen); if (priv->rdreq == NULL) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDALLOCREQ), -ENOMEM); ret = -ENOMEM; goto errout; } priv->rdreq->callback = rndis_rdcomplete; /* Pre-allocate write request containers and put in a free list. * The buffer size should be larger than a full packet. Otherwise, * we will send a bogus null packet at the end of each packet. * * Pick the larger of the max packet size and the configured request * size. */ reqlen = 64; if (CONFIG_RNDIS_BULKIN_REQLEN > reqlen) { reqlen = CONFIG_RNDIS_BULKIN_REQLEN; } for (i = 0; i < CONFIG_RNDIS_NWRREQS; i++) { reqcontainer = &priv->wrreqs[i]; reqcontainer->req = usbclass_allocreq(priv->epbulkin, reqlen); if (reqcontainer->req == NULL) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_WRALLOCREQ), -ENOMEM); ret = -ENOMEM; goto errout; } reqcontainer->req->priv = reqcontainer; reqcontainer->req->callback = rndis_wrcomplete; flags = enter_critical_section(); sq_addlast((FAR sq_entry_t *)reqcontainer, &priv->reqlist); leave_critical_section(flags); } /* Report if we are selfpowered */ #ifndef CONFIG_RNDIS_COMPOSITE #ifdef CONFIG_USBDEV_SELFPOWERED DEV_SETSELFPOWERED(dev); #endif /* And pull-up the data line for the soft connect function */ DEV_CONNECT(dev); #endif return OK; errout: usbclass_unbind(driver, dev); return ret; } /**************************************************************************** * Name: usbclass_unbind * * Description: * Invoked when the driver is unbound from a USB device driver * ****************************************************************************/ static void usbclass_unbind(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev) { FAR struct rndis_dev_s *priv; FAR struct rndis_req_s *reqcontainer; irqstate_t flags; usbtrace(TRACE_CLASSUNBIND, 0); #ifdef CONFIG_DEBUG_FEATURES if (!driver || !dev || !dev->ep0) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0); return; } #endif /* Extract reference to private data */ priv = ((FAR struct rndis_driver_s *)driver)->dev; #ifdef CONFIG_DEBUG_FEATURES if (!priv) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EP0NOTBOUND), 0); return; } #endif /* Make sure that we are not already unbound */ if (priv != NULL) { /* Make sure that the endpoints have been unconfigured. If * we were terminated gracefully, then the configuration should * already have been reset. If not, then calling usbclass_resetconfig * should cause the endpoints to immediately terminate all * transfers and return the requests to us (with result == -ESHUTDOWN) */ usbclass_resetconfig(priv); up_mdelay(50); /* Free the interrupt IN endpoint */ if (priv->epintin) { DEV_FREEEP(dev, priv->epintin); priv->epintin = NULL; } /* Free the bulk IN endpoint */ if (priv->epbulkin) { DEV_FREEEP(dev, priv->epbulkin); priv->epbulkin = NULL; } /* Free the pre-allocated control request */ if (priv->ctrlreq != NULL) { usbclass_freereq(dev->ep0, priv->ctrlreq); priv->ctrlreq = NULL; } if (priv->epintin_req != NULL) { usbclass_freereq(priv->epintin, priv->epintin_req); priv->epintin_req = NULL; } /* Free pre-allocated read requests (which should all have * been returned to the free list at this time -- we don't check) */ if (priv->rdreq) { usbclass_freereq(priv->epbulkout, priv->rdreq); } /* Free the bulk OUT endpoint */ if (priv->epbulkout) { DEV_FREEEP(dev, priv->epbulkout); priv->epbulkout = NULL; } netdev_unregister(&priv->netdev); /* Free write requests that are not in use (which should be all * of them */ flags = enter_critical_section(); while (!sq_empty(&priv->reqlist)) { reqcontainer = (struct rndis_req_s *)sq_remfirst(&priv->reqlist); if (reqcontainer->req != NULL) { usbclass_freereq(priv->epbulkin, reqcontainer->req); } } leave_critical_section(flags); } } /**************************************************************************** * Name: usbclass_setup * * Description: * Invoked for ep0 control requests. This function probably executes * in the context of an interrupt handler. * ****************************************************************************/ static int usbclass_setup(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev, FAR const struct usb_ctrlreq_s *ctrl, FAR uint8_t *dataout, size_t outlen) { FAR struct rndis_dev_s *priv; FAR struct usbdev_req_s *ctrlreq; uint16_t value; uint16_t len; int ret = -EOPNOTSUPP; #ifdef CONFIG_DEBUG_FEATURES if (!driver || !dev || !dev->ep0 || !ctrl) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0); return -EIO; } #endif /* Extract reference to private data */ usbtrace(TRACE_CLASSSETUP, ctrl->req); priv = ((FAR struct rndis_driver_s *)driver)->dev; #ifdef CONFIG_DEBUG_FEATURES if (!priv || !priv->ctrlreq) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EP0NOTBOUND), 0); return -ENODEV; } #endif ctrlreq = priv->ctrlreq; /* Extract the little-endian 16-bit values to host order */ value = GETUINT16(ctrl->value); len = GETUINT16(ctrl->len); uinfo("type=%02x req=%02x value=%04x len=%04x\n", ctrl->type, ctrl->req, value, len); switch (ctrl->type & USB_REQ_TYPE_MASK) { /*********************************************************************** * Standard Requests ***********************************************************************/ case USB_REQ_TYPE_STANDARD: { switch (ctrl->req) { case USB_REQ_GETDESCRIPTOR: { /* The value field specifies the descriptor type in the MS byte * and the descriptor index in the LS byte (order is little * endian) */ switch (ctrl->value[1]) { #ifndef CONFIG_RNDIS_COMPOSITE case USB_DESC_TYPE_DEVICE: { ret = USB_SIZEOF_DEVDESC; memcpy(ctrlreq->buf, &g_devdesc, ret); } break; #endif case USB_DESC_TYPE_CONFIG: { ret = usbclass_mkcfgdesc(ctrlreq->buf, &priv->devinfo); } break; case USB_DESC_TYPE_STRING: { /* index == language code. */ ret = usbclass_mkstrdesc(ctrl->value[0], (FAR struct usb_strdesc_s *)ctrlreq->buf); } break; default: { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_GETUNKNOWNDESC), value); } break; } } break; case USB_REQ_SETCONFIGURATION: { if (ctrl->type == 0) { ret = usbclass_setconfig(priv, value); } } break; case USB_REQ_GETCONFIGURATION: { if (ctrl->type == USB_DIR_IN) { *(FAR uint8_t *)ctrlreq->buf = priv->config; ret = 1; } } break; default: usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_UNSUPPORTEDSTDREQ), ctrl->req); break; } } break; /* Class requests */ case USB_REQ_TYPE_CLASS: { if ((ctrl->type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_INTERFACE) { if (ctrl->req == RNDIS_SEND_ENCAPSULATED_COMMAND) { ret = rndis_handle_control_message(priv, dataout, outlen); } else if (ctrl->req == RNDIS_GET_ENCAPSULATED_RESPONSE) { if (!priv->ctrlreq_has_encap_response) { ret = 1; ctrlreq->buf[0] = 0; } else { /* There is data prepared in the ctrlreq buffer. * Just assign the length. */ FAR struct rndis_response_header *hdr = (struct rndis_response_header *)ctrlreq->buf; ret = hdr->msglen; } } } } break; default: usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_UNSUPPORTEDTYPE), ctrl->type); break; } /* Respond to the setup command if data was returned. On an error return * value (ret < 0), the USB driver will stall. */ if (ret >= 0) { ctrlreq->len = min(len, ret); ctrlreq->flags = USBDEV_REQFLAGS_NULLPKT; ret = EP_SUBMIT(dev->ep0, ctrlreq); if (ret < 0) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPRESPQ), (uint16_t)-ret); ctrlreq->result = OK; usbclass_ep0incomplete(dev->ep0, ctrlreq); } } return ret; } /**************************************************************************** * Name: usbclass_disconnect * * Description: * Invoked after all transfers have been stopped, when the host is * disconnected. This function is probably called from the context of an * interrupt handler. * ****************************************************************************/ static void usbclass_disconnect(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev) { FAR struct rndis_dev_s *priv; irqstate_t flags; usbtrace(TRACE_CLASSDISCONNECT, 0); #ifdef CONFIG_DEBUG_FEATURES if (!driver || !dev || !dev->ep0) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0); return; } #endif /* Extract reference to private data */ priv = ((FAR struct rndis_driver_s *)driver)->dev; #ifdef CONFIG_DEBUG_FEATURES if (!priv) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EP0NOTBOUND), 0); return; } #endif /* Inform the "upper half" network driver that we have lost the USB * connection. */ priv->netdev.d_ifdown(&priv->netdev); flags = enter_critical_section(); /* Reset the configuration */ usbclass_resetconfig(priv); leave_critical_section(flags); /* Perform the soft connect function so that we will we can be * re-enumerated. */ DEV_CONNECT(dev); } /**************************************************************************** * Name: usbclass_resetconfig * * Description: * Mark the device as not configured and disable all endpoints. * ****************************************************************************/ static void usbclass_resetconfig(FAR struct rndis_dev_s *priv) { /* Are we configured? */ if (priv->config != RNDIS_CONFIGIDNONE) { /* Yes.. but not anymore */ priv->config = RNDIS_CONFIGIDNONE; priv->netdev.d_ifdown(&priv->netdev); /* Disable endpoints. This should force completion of all pending * transfers. */ EP_DISABLE(priv->epintin); EP_DISABLE(priv->epbulkin); EP_DISABLE(priv->epbulkout); } } /**************************************************************************** * Name: usbclass_setconfig * * Description: * Set the device configuration by allocating and configuring endpoints and * by allocating and queue read and write requests. * ****************************************************************************/ static int usbclass_setconfig(FAR struct rndis_dev_s *priv, uint8_t config) { struct usb_epdesc_s epdesc; bool hispeed = false; int ret = 0; #ifdef CONFIG_DEBUG_FEATURES if (priv == NULL) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0); return -EIO; } #endif #ifdef CONFIG_USBDEV_DUALSPEED hispeed = (priv->usbdev->speed == USB_SPEED_HIGH); #endif if (config == priv->config) { /* Already configured -- Do nothing */ usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_ALREADYCONFIGURED), 0); return 0; } /* Discard the previous configuration data */ usbclass_resetconfig(priv); /* Was this a request to simply discard the current configuration? */ if (config == RNDIS_CONFIGIDNONE) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_CONFIGNONE), 0); return 0; } /* We only accept one configuration */ if (config != RNDIS_CONFIGID) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_CONFIGIDBAD), 0); return -EINVAL; } /* Configure the IN interrupt endpoint */ usbclass_copy_epdesc(RNDIS_EP_INTIN_IDX, &epdesc, &priv->devinfo, hispeed); ret = EP_CONFIGURE(priv->epintin, &epdesc, false); if (ret < 0) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPINTINCONFIGFAIL), 0); goto errout; } priv->epintin->priv = priv; /* Configure the IN bulk endpoint */ usbclass_copy_epdesc(RNDIS_EP_BULKIN_IDX, &epdesc, &priv->devinfo, hispeed); ret = EP_CONFIGURE(priv->epbulkin, &epdesc, false); if (ret < 0) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPBULKINCONFIGFAIL), 0); goto errout; } priv->epbulkin->priv = priv; /* Configure the OUT bulk endpoint */ usbclass_copy_epdesc(RNDIS_EP_BULKOUT_IDX, &epdesc, &priv->devinfo, hispeed); ret = EP_CONFIGURE(priv->epbulkout, &epdesc, true); if (ret < 0) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPBULKOUTCONFIGFAIL), 0); goto errout; } priv->epbulkout->priv = priv; /* Queue read requests in the bulk OUT endpoint */ priv->rdreq->callback = rndis_rdcomplete; ret = rndis_submit_rdreq(priv); if (ret != OK) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDSUBMIT), (uint16_t)-ret); goto errout; } /* We are successfully configured */ priv->config = config; if (priv->netdev.d_ifup(&priv->netdev) == OK) { priv->netdev.d_flags |= IFF_UP; } return OK; errout: usbclass_resetconfig(priv); return ret; } /**************************************************************************** * Name: usbclass_classobject * * Description: * Allocate memory for the RNDIS driver class object * * Returned Value: * 0 on success, negative error code on failure. * ****************************************************************************/ static int usbclass_classobject(int minor, FAR struct usbdev_devinfo_s *devinfo, FAR struct usbdevclass_driver_s **classdev) { FAR struct rndis_alloc_s *alloc; FAR struct rndis_dev_s *priv; FAR struct rndis_driver_s *drvr; int ret; /* Allocate the structures needed */ alloc = kmm_zalloc(sizeof(struct rndis_alloc_s)); if (!alloc) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_ALLOCDEVSTRUCT), 0); return -ENOMEM; } /* Convenience pointers into the allocated blob */ priv = &alloc->dev; drvr = &alloc->drvr; *classdev = &drvr->drvr; #ifdef CONFIG_RNDIS_COMPOSITE priv->devinfo = *devinfo; #else priv->devinfo.epno[RNDIS_EP_INTIN_IDX] = USB_EPNO(RNDIS_EPINTIN_ADDR); priv->devinfo.epno[RNDIS_EP_BULKIN_IDX] = USB_EPNO(RNDIS_EPBULKIN_ADDR); priv->devinfo.epno[RNDIS_EP_BULKOUT_IDX] = USB_EPNO(RNDIS_EPBULKOUT_ADDR); #endif /* Initialize the USB ethernet driver structure */ sq_init(&priv->reqlist); memcpy(priv->host_mac_address, g_rndis_default_mac_addr, 6); priv->netdev.d_private = priv; priv->netdev.d_ifup = &rndis_ifup; priv->netdev.d_ifdown = &rndis_ifdown; priv->netdev.d_txavail = &rndis_txavail; /* MAC address filtering is purposefully left out of this driver. Since * in the RNDIS USB scenario there are only two devices in the network * (host and us), there shouldn't be any packets received that don't * belong to us. */ /* Initialize the USB class driver structure */ drvr->drvr.speed = USB_SPEED_FULL; drvr->drvr.ops = &g_driverops; drvr->dev = priv; ret = netdev_register(&priv->netdev, NET_LL_ETHERNET); if (ret) { uerr("Failed to register net device"); return ret; } drvr->dev->registered = true; return OK; } static void usbclass_uninitialize(FAR struct usbdevclass_driver_s *classdev) { FAR struct rndis_driver_s *drvr = (FAR struct rndis_driver_s *)classdev; FAR struct rndis_alloc_s *alloc = (FAR struct rndis_alloc_s *)drvr->dev; if (drvr->dev->registered) { netdev_unregister(&drvr->dev->netdev); drvr->dev->registered = false; } else { kmm_free(alloc); } } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: usbdev_rndis_initialize * * Description: * Initialize the RNDIS USB device driver. * * Input Parameters: * mac_address: pointer to an array of six octets which is the MAC address * of the host side of the interface. May be NULL to use the * default MAC address. * * Returned Value: * 0 on success, -errno on failure * ****************************************************************************/ #ifndef CONFIG_RNDIS_COMPOSITE int usbdev_rndis_initialize(FAR const uint8_t *mac_address) { int ret; FAR struct usbdevclass_driver_s *classdev; FAR struct rndis_driver_s *drvr; ret = usbclass_classobject(0, NULL, &classdev); if (ret) { nerr("usbclass_classobject failed: %d\n", ret); return ret; } drvr = (FAR struct rndis_driver_s *)classdev; if (mac_address) { memcpy(drvr->dev->host_mac_address, mac_address, 6); } ret = usbdev_register(&drvr->drvr); if (ret) { nerr("usbdev_register failed: %d\n", ret); usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_DEVREGISTER), (uint16_t)-ret); usbclass_uninitialize(classdev); return ret; } return OK; } #endif /**************************************************************************** * Name: usbdev_rndis_set_host_mac_addr * * Description: * Set host MAC address. Mainly for use with composite devices where * the MAC cannot be given directly to usbdev_rndis_initialize(). * * Input Parameters: * netdev: pointer to the network interface. Can be obtained from * e.g. netdev_findbyname(). * * mac_address: pointer to an array of six octets which is the MAC address * of the host side of the interface. May be NULL to use the * default MAC address. * * Returned Value: * 0 on success, -errno on failure * ****************************************************************************/ int usbdev_rndis_set_host_mac_addr(FAR struct net_driver_s *netdev, FAR const uint8_t *mac_address) { FAR struct rndis_dev_s *dev = (FAR struct rndis_dev_s *)netdev; if (mac_address) { memcpy(dev->host_mac_address, mac_address, 6); } else { memcpy(dev->host_mac_address, g_rndis_default_mac_addr, 6); } return OK; } /**************************************************************************** * Name: usbdev_rndis_get_composite_devdesc * * Description: * Helper function to fill in some constants into the composite * configuration struct. * * Input Parameters: * dev - Pointer to the configuration struct we should fill * * Returned Value: * None * ****************************************************************************/ #ifdef CONFIG_RNDIS_COMPOSITE void usbdev_rndis_get_composite_devdesc(struct composite_devdesc_s *dev) { memset(dev, 0, sizeof(struct composite_devdesc_s)); dev->mkconfdesc = usbclass_mkcfgdesc; dev->mkstrdesc = usbclass_mkstrdesc; dev->classobject = usbclass_classobject; dev->uninitialize = usbclass_uninitialize; dev->nconfigs = RNDIS_NCONFIGS; dev->configid = RNDIS_CONFIGID; dev->cfgdescsize = sizeof(g_rndis_cfgdesc); dev->devinfo.ninterfaces = RNDIS_NINTERFACES; dev->devinfo.nstrings = 0; dev->devinfo.nendpoints = RNDIS_NUM_EPS; /* Default endpoint indexes, board-specific logic can override these */ dev->devinfo.epno[RNDIS_EP_INTIN_IDX] = USB_EPNO(RNDIS_EPINTIN_ADDR); dev->devinfo.epno[RNDIS_EP_BULKIN_IDX] = USB_EPNO(RNDIS_EPBULKIN_ADDR); dev->devinfo.epno[RNDIS_EP_BULKOUT_IDX] = USB_EPNO(RNDIS_EPBULKOUT_ADDR); } #endif