#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_NSH_CMDPARMS is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="viewtool-stm32f107"
CONFIG_ARCH_BOARD_VIEWTOOL_STM32F107=y
CONFIG_ARCH_CHIP="stm32"
CONFIG_ARCH_CHIP_STM32=y
CONFIG_ARCH_CHIP_STM32F107VC=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_BOARD_LOOPSPERMSEC=5483
CONFIG_BUILTIN=y
CONFIG_ETH0_PHY_DP83848C=y
CONFIG_FS_PROCFS=y
CONFIG_HOST_WINDOWS=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_IOB_NBUFFERS=24
CONFIG_LIBC_HOSTNAME="Viewtool-STM32F107"
CONFIG_NET=y
CONFIG_NETDB_DNSCLIENT=y
CONFIG_NETDB_DNSSERVER_NOADDR=y
CONFIG_NETINIT_NOMAC=y
CONFIG_NETINIT_THREAD=y
CONFIG_NETUTILS_DHCPC=y
CONFIG_NETUTILS_TELNETD=y
CONFIG_NETUTILS_TFTPC=y
CONFIG_NETUTILS_WEBCLIENT=y
CONFIG_NET_ARP_SEND=y
CONFIG_NET_BROADCAST=y
CONFIG_NET_ICMP=y
CONFIG_NET_ICMP_SOCKET=y
CONFIG_NET_ICMPv6=y
CONFIG_NET_ICMPv6_NEIGHBOR=y
CONFIG_NET_ICMPv6_SOCKET=y
CONFIG_NET_IPv6=y
CONFIG_NET_MAX_LISTENPORTS=40
CONFIG_NET_ROUTE=y
CONFIG_NET_TCP=y
CONFIG_NET_TCP_CONNS=40
CONFIG_NET_TCP_WRITE_BUFFERS=y
CONFIG_NET_UDP=y
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=65536
CONFIG_RAM_START=0x20000000
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_HPWORKPRIORITY=192
CONFIG_SCHED_HPWORKSTACKSIZE=1024
CONFIG_START_DAY=23
CONFIG_STM32_ETHMAC=y
CONFIG_STM32_JTAG_FULL_ENABLE=y
CONFIG_STM32_PHYSR=16
CONFIG_STM32_PHYSR_100MBPS=0x0000
CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004
CONFIG_STM32_PHYSR_MODE=0x0004
CONFIG_STM32_PHYSR_SPEED=0x0002
CONFIG_STM32_PWR=y
CONFIG_STM32_RMII_EXTCLK=y
CONFIG_STM32_USART1=y
CONFIG_SYSTEM_NSH=y
CONFIG_SYSTEM_PING6=y
CONFIG_SYSTEM_PING=y
CONFIG_TASK_NAME_SIZE=0
CONFIG_USART1_SERIAL_CONSOLE=y