/************************************************************************************
 * configs/mikroe_stm32f4/src/stm32_clockconfig.c
 *
 *   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
 *   Author: Ken Pettit <pettitkd@gmail.com>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ************************************************************************************/

/************************************************************************************
 * Included Files
 ************************************************************************************/

#include <nuttx/config.h>

#include <debug.h>

#include <arch/board/board.h>

#include "up_arch.h"
#include "mikroe-stm32f4.h"

/************************************************************************************
 * Pre-processor Definitions
 ************************************************************************************/

/************************************************************************************
 * Private Functions
 ************************************************************************************/

/************************************************************************************
 * Public Functions
 ************************************************************************************/

/************************************************************************************
 * Name: stm32_board_clockconfig
 *
 * Description:
 *   The Mikroe-STM32F4 board does not have an external crystal, so it must rely
 *   on the internal 16Mhz RC oscillator.  The default clock configuration in the
 *   OS for the STM32 architecture assumes an external crystal, so we must provide
 *   a board specific clock configuration routine.
 *
 ************************************************************************************/

#if defined(CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG)
void stm32_board_clockconfig(void)
{
  uint32_t regval;

  /* Configure chip clocking to use the internal 16Mhz RC oscillator.
   *
   * NOTE: We will assume the HSIRDY (High Speed Internal RC Ready) bit is
   * set, otherwise we wouldn't be here executing code.
   */

  regval  = getreg32(STM32_RCC_APB1ENR);
  regval |= RCC_APB1ENR_PWREN;
  putreg32(regval, STM32_RCC_APB1ENR);

  regval  = getreg32(STM32_PWR_CR);
  regval |= PWR_CR_VOS;
  putreg32(regval, STM32_PWR_CR);

  /* Set the HCLK source/divider */

  regval = getreg32(STM32_RCC_CFGR);
  regval &= ~RCC_CFGR_HPRE_MASK;
  regval |= STM32_RCC_CFGR_HPRE;
  putreg32(regval, STM32_RCC_CFGR);

  /* Set the PCLK2 divider */

  regval = getreg32(STM32_RCC_CFGR);
  regval &= ~RCC_CFGR_PPRE2_MASK;
  regval |= STM32_RCC_CFGR_PPRE2;
  putreg32(regval, STM32_RCC_CFGR);

  /* Set the PCLK1 divider */

  regval = getreg32(STM32_RCC_CFGR);
  regval &= ~RCC_CFGR_PPRE1_MASK;
  regval |= STM32_RCC_CFGR_PPRE1;
  putreg32(regval, STM32_RCC_CFGR);

  /* Set the PLL dividers and multipliers to configure the main PLL */

  regval = (STM32_PLLCFG_PLLM | STM32_PLLCFG_PLLN |STM32_PLLCFG_PLLP |
            RCC_PLLCFG_PLLSRC_HSI | STM32_PLLCFG_PLLQ);
  putreg32(regval, STM32_RCC_PLLCFG);

  /* Enable the main PLL */

  regval = getreg32(STM32_RCC_CR);
  regval |= RCC_CR_PLLON;
  putreg32(regval, STM32_RCC_CR);

  /* Wait until the PLL is ready */

  while ((getreg32(STM32_RCC_CR) & RCC_CR_PLLRDY) == 0)
    ;

  /* Enable FLASH prefetch, instruction cache, data cache, and 5 wait states */

#ifdef CONFIG_STM32_FLASH_PREFETCH
  regval = (FLASH_ACR_LATENCY_5 | FLASH_ACR_ICEN | FLASH_ACR_DCEN | FLASH_ACR_PRFTEN);
#else
  regval = (FLASH_ACR_LATENCY_5 | FLASH_ACR_ICEN | FLASH_ACR_DCEN);
#endif
  putreg32(regval, STM32_FLASH_ACR);

  /* Select the main PLL as system clock source */

  regval  = getreg32(STM32_RCC_CFGR);
  regval &= ~RCC_CFGR_SW_MASK;
  regval |= RCC_CFGR_SW_PLL;
  putreg32(regval, STM32_RCC_CFGR);

  /* Wait until the PLL source is used as the system clock source */

  while ((getreg32(STM32_RCC_CFGR) & RCC_CFGR_SWS_MASK) != RCC_CFGR_SWS_PLL)
    ;
}
#endif