/**************************************************************************** * net/nat/nat.h * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ #ifndef __NET_NAT_NAT_H #define __NET_NAT_NAT_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #ifdef CONFIG_NET_NAT /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Adjust checksums in headers. */ #define nat_chksum_adjust(chksum,optr,nptr,len) \ net_chksum_adjust((FAR uint16_t *)(chksum), (FAR uint16_t *)(optr), len, \ (FAR uint16_t *)(nptr), len) /* Getting IP & Port to manipulate from L3/L4 header. */ #define MANIP_IPADDR(iphdr,manip_type) \ ((manip_type) == NAT_MANIP_SRC ? (iphdr)->srcipaddr : (iphdr)->destipaddr) #define MANIP_PORT(l4hdr,manip_type) \ ((manip_type) == NAT_MANIP_SRC ? &(l4hdr)->srcport : &(l4hdr)->destport) /* Getting peer IP & Port (just other than MANIP) */ #define PEER_IPADDR(iphdr,manip_type) \ ((manip_type) != NAT_MANIP_SRC ? (iphdr)->srcipaddr : (iphdr)->destipaddr) #define PEER_PORT(l4hdr,manip_type) \ ((manip_type) != NAT_MANIP_SRC ? &(l4hdr)->srcport : &(l4hdr)->destport) /**************************************************************************** * Public Types ****************************************************************************/ struct ipv4_nat_entry_s { hash_node_t hash_inbound; hash_node_t hash_outbound; /* Local Network External Network * |----------------| * | | external port> peer port> * |----------------| * * Full cone NAT only need to save local ip:port and external ip:port. * Symmetric NAT need to save peer ip:port as well. * For ICMP, save id in port field. */ in_addr_t local_ip; /* IP address of the local (private) host. */ in_addr_t external_ip; /* External IP address. */ #ifdef CONFIG_NET_NAT44_SYMMETRIC in_addr_t peer_ip; /* Peer IP address. */ #endif uint16_t local_port; /* Port of the local (private) host. */ uint16_t external_port; /* The external port of local (private) host. */ #ifdef CONFIG_NET_NAT44_SYMMETRIC uint16_t peer_port; /* Peer port. */ #endif uint8_t protocol; /* L4 protocol (TCP, UDP etc). */ int32_t expire_time; /* The expiration time of this entry. */ }; struct ipv6_nat_entry_s { hash_node_t hash_inbound; hash_node_t hash_outbound; net_ipv6addr_t local_ip; /* IP address of the local host. */ net_ipv6addr_t external_ip; /* External IP address. */ #ifdef CONFIG_NET_NAT66_SYMMETRIC net_ipv6addr_t peer_ip; /* Peer IP address. */ #endif uint16_t local_port; /* Port of the local host. */ uint16_t external_port; /* The external port of local host. */ #ifdef CONFIG_NET_NAT66_SYMMETRIC uint16_t peer_port; /* Peer port. */ #endif uint8_t protocol; /* L4 protocol (TCP, UDP etc). */ int32_t expire_time; /* The expiration time of this entry. */ }; typedef struct ipv4_nat_entry_s ipv4_nat_entry_t; typedef struct ipv6_nat_entry_s ipv6_nat_entry_t; typedef CODE void (*ipv4_nat_entry_cb_t)(FAR ipv4_nat_entry_t *entry, FAR void *arg); typedef CODE void (*ipv6_nat_entry_cb_t)(FAR ipv6_nat_entry_t *entry, FAR void *arg); /* NAT IP/Port manipulate type, to indicate whether to manipulate source or * destination IP/Port in a packet. */ enum nat_manip_type_e { NAT_MANIP_SRC, NAT_MANIP_DST }; /**************************************************************************** * Public Function Prototypes ****************************************************************************/ /**************************************************************************** * Name: nat_enable * * Description: * Enable NAT function on a network device. * * Input Parameters: * dev - The device on which the outbound packets will be masqueraded. * * Returned Value: * Zero is returned if NAT function is successfully enabled on the device; * A negated errno value is returned if failed. * ****************************************************************************/ int nat_enable(FAR struct net_driver_s *dev); /**************************************************************************** * Name: nat_disable * * Description: * Disable NAT function on a network device. * * Input Parameters: * dev - The device on which the NAT function will be disabled. * * Returned Value: * Zero is returned if NAT function is successfully disabled on the device; * A negated errno value is returned if failed. * ****************************************************************************/ int nat_disable(FAR struct net_driver_s *dev); /**************************************************************************** * Name: ipv4/ipv6_nat_inbound * * Description: * Check if a received packet belongs to a NAT entry. If so, translate it. * * Input Parameters: * dev - The device on which the packet is received. * ipv4/ipv6 - Points to the IP header with dev->d_buf. * ****************************************************************************/ #ifdef CONFIG_NET_NAT44 void ipv4_nat_inbound(FAR struct net_driver_s *dev, FAR struct ipv4_hdr_s *ipv4); #endif #ifdef CONFIG_NET_NAT66 void ipv6_nat_inbound(FAR struct net_driver_s *dev, FAR struct ipv6_hdr_s *ipv6); #endif /**************************************************************************** * Name: ipv4/ipv6_nat_outbound * * Description: * Check if we want to perform NAT with this outbound packet before sending * it. If so, translate it. * * Input Parameters: * dev - The device on which the packet will be sent. * ipv4/ipv6 - Points to the IP header to be filled into dev->d_buf later. * manip_type - Whether local IP/Port is in source or destination. * * Returned Value: * Zero is returned if NAT is successfully applied, or is not enabled for * this packet; * A negated errno value is returned if error occured. * ****************************************************************************/ #ifdef CONFIG_NET_NAT44 int ipv4_nat_outbound(FAR struct net_driver_s *dev, FAR struct ipv4_hdr_s *ipv4, enum nat_manip_type_e manip_type); #endif #ifdef CONFIG_NET_NAT66 int ipv6_nat_outbound(FAR struct net_driver_s *dev, FAR struct ipv6_hdr_s *ipv6, enum nat_manip_type_e manip_type); #endif /**************************************************************************** * Name: nat_port_inuse * * Description: * Check whether a port is currently used by NAT. * * Input Parameters: * domain - The domain of the packet. * protocol - The L4 protocol of the packet. * ip - The IP bind with the port (in network byte order). * port - The port number to check (in network byte order). * * Returned Value: * True if the port is already used by NAT, otherwise false. * ****************************************************************************/ bool nat_port_inuse(uint8_t domain, uint8_t protocol, FAR const union ip_addr_u *ip, uint16_t port); /**************************************************************************** * Name: nat_port_select * * Description: * Select an available port number for TCP/UDP protocol, or id for ICMP. * * Input Parameters: * dev - The device on which the packet will be sent. * domain - The domain of the packet. * protocol - The L4 protocol of the packet. * external_ip - The external IP bind with the port. * local_port - The local port of the packet, as reference. * * Returned Value: * External port number on success; 0 on failure * ****************************************************************************/ uint16_t nat_port_select(FAR struct net_driver_s *dev, uint8_t domain, uint8_t protocol, FAR const union ip_addr_u *external_ip, uint16_t local_port); /**************************************************************************** * Name: nat_expire_time * * Description: * Get the expiration time of a specific protocol. * * Input Parameters: * protocol - The L4 protocol of the packet. * * Returned Value: * The expiration time of the protocol. * ****************************************************************************/ uint32_t nat_expire_time(uint8_t protocol); /**************************************************************************** * Name: ipv4/ipv6_nat_entry_foreach * * Description: * Call the callback function for each NAT entry. * * Input Parameters: * cb - The callback function. * arg - The argument to pass to the callback function. * ****************************************************************************/ #ifdef CONFIG_NET_NAT44 void ipv4_nat_entry_foreach(ipv4_nat_entry_cb_t cb, FAR void *arg); #endif #ifdef CONFIG_NET_NAT66 void ipv6_nat_entry_foreach(ipv6_nat_entry_cb_t cb, FAR void *arg); #endif /**************************************************************************** * Name: ipv4/ipv6_nat_entry_clear * * Description: * Clear all entries related to dev. Called when NAT will be disabled on * any device. * * Input Parameters: * dev - The device on which NAT entries will be cleared. * * Assumptions: * NAT is initialized. * ****************************************************************************/ #ifdef CONFIG_NET_NAT44 void ipv4_nat_entry_clear(FAR struct net_driver_s *dev); #endif #ifdef CONFIG_NET_NAT66 void ipv6_nat_entry_clear(FAR struct net_driver_s *dev); #endif /**************************************************************************** * Name: ipv4/ipv6_nat_inbound_entry_find * * Description: * Find the inbound entry in NAT entry list. * * Input Parameters: * protocol - The L4 protocol of the packet. * external_ip - The external ip of the packet, supports INADDR_ANY. * external_port - The external port of the packet. * peer_ip - The peer ip of the packet. * peer_port - The peer port of the packet. * refresh - Whether to refresh the selected entry. * * Returned Value: * Pointer to entry on success; null on failure * ****************************************************************************/ #ifdef CONFIG_NET_NAT44 FAR ipv4_nat_entry_t * ipv4_nat_inbound_entry_find(uint8_t protocol, in_addr_t external_ip, uint16_t external_port, in_addr_t peer_ip, uint16_t peer_port, bool refresh); #endif #ifdef CONFIG_NET_NAT66 FAR ipv6_nat_entry_t * ipv6_nat_inbound_entry_find(uint8_t protocol, const net_ipv6addr_t external_ip, uint16_t external_port, const net_ipv6addr_t peer_ip, uint16_t peer_port, bool refresh); #endif /**************************************************************************** * Name: ipv4/ipv6_nat_outbound_entry_find * * Description: * Find the outbound entry in NAT entry list. Create one if corresponding * entry does not exist. * * Input Parameters: * dev - The device on which the packet will be sent. * protocol - The L4 protocol of the packet. * local_ip - The local ip of the packet. * local_port - The local port of the packet. * peer_ip - The peer ip of the packet. * peer_port - The peer port of the packet. * try_create - Try create the entry if no entry found. * * Returned Value: * Pointer to entry on success; null on failure * ****************************************************************************/ #ifdef CONFIG_NET_NAT44 FAR ipv4_nat_entry_t * ipv4_nat_outbound_entry_find(FAR struct net_driver_s *dev, uint8_t protocol, in_addr_t local_ip, uint16_t local_port, in_addr_t peer_ip, uint16_t peer_port, bool try_create); #endif #ifdef CONFIG_NET_NAT66 FAR ipv6_nat_entry_t * ipv6_nat_outbound_entry_find(FAR struct net_driver_s *dev, uint8_t protocol, const net_ipv6addr_t local_ip, uint16_t local_port, const net_ipv6addr_t peer_ip, uint16_t peer_port, bool try_create); #endif #endif /* CONFIG_NET_NAT */ #endif /* __NET_NAT_NAT_H */