/************************************************************************************ * configs/ne64badge/src/ne64badge.h * * Copyright (C) 2011 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ************************************************************************************/ #ifndef __CONFIGS_NE64BADGE_SRC_NE64BADGE_H #define __CONFIGS_NE64BADGE_SRC_NE64BADGE_H /************************************************************************************ * Included Files ************************************************************************************/ #include #include #include "m9s12.h" /************************************************************************************ * Pre-processor Definitions ************************************************************************************/ /* NE64BADGE Pin Usage **************************************************************/ /* PIN PIN NAME BOARD SIGNAL NOTES * --- ------------------- -------------- ---------------------- * 44 RESET J3 RESET_L Also to SW3 * 57 BKGD/MODC/TAGHI_B BDM BKGD CON6A * * 85 PAD0 VR1 Potentiometer * 86 PAD1 J3 ANALOG_IN0 Not used on board * 87 PAD2 J3 ANALOG_IN1 " " " " "" " " * 88 PAD3 J3 ANALOG_IN2 " " " " "" " " * 89 PAD4 J3 ANALOG_IN3 " " " " "" " " * * 70 PHY_TXP J7 TD+ RJ45 connector * 71 PHY_TXN J7 TD- RJ45 connector * 73 PHY_RXP J7 RD+ RJ45 connector * 74 PHY_RXN J7 RD- RJ45 connector * * Ports A,B,E,K managed by the MEBI block * --------------------------------------- * 60 PA0/ADDR8/DATA8 J3 ADDR_DATA8 Not used on board * 61 PA1/ADDR9/DATA9 J3 ADDR_DATA9 " " " " "" " " * 62 PA2/ADDR10/DATA10 J3 ADDR_DATA10 " " " " "" " " * 63 PA3/ADDR11/DATA11 J3 ADDR_DATA11 " " " " "" " " * 77 PA4/ADDR12/DATA12 J3 ADDR_DATA12 " " " " "" " " * 78 PA5/ADDR13/DATA13 J3 ADDR_DATA13 " " " " "" " " * 79 PA6/ADDR14/DATA14 J3 ADDR_DATA14 " " " " "" " " * 80 PA7/ADDR15/DATA15 J3 ADDR_DATA15 " " " " "" " " * * 10 PB0/ADDR0/DATA0 J3 ADDR_DATA0 Not used on board * 11 PB1/ADDR1/DATA1 J3 ADDR_DATA1 " " " " "" " " * 12 PB2/ADDR2/DATA2 J3 ADDR_DATA2 " " " " "" " " * 13 PB3/ADDR3/DATA3 J3 ADDR_DATA3 " " " " "" " " * 16 PB4/ADDR4/DATA4 J3 ADDR_DATA4 " " " " "" " " * 17 PB5/ADDR5/DATA5 J3 ADDR_DATA5 " " " " "" " " * 18 PB6/ADDR6/DATA6 J3 ADDR_DATA6 " " " " "" " " * 19 PB7/ADDR7/DATA7 J3 ADDR_DATA7 " " " " "" " " * * 56 PE0/XIRQ_B BUTTON1 SW1 * 55 PE1/IRQ_B J3 IRQ Not used on board * 54 PE2/R_W J3 RW " " " " "" " " * 53 PE3/LSTRB_B/TAGLO_B J3 LSTRB " " " " "" " " * 41 PE4/ECLK J3 ECLK " " " " "" " " * 40 PE5/IPIPE0/MODA J3 MODA " " " " "" " " * 39 PE6/IPIPE1/MODB J3 MODB " " " " "" " " * 38 PE7/NOACC/XCLKS_B pulled low pulled low */ #define NE64BADGE_BUTTON1 (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT_E | GPIO_PIN_0) /* 97 PK0/XADR14 N/C N/C * 98 PK1/XADR15 N/C N/C * 99 PK2/XADR16 N/C N/C * 100 PK3/XADR17 N/C N/C * 103 PK4/XADR18 N/C N/C * 104 PK5/XADR19 N/C N/C * 105 PK6/XCS_B J3 XCS Not used on board * 106 PK7/ECS_B/ROMCTL J3 ECS " " " " "" " " * * Ports T,S,G,H,J,L managed by the PIM Block * ------------------------------------------ * 110 PT4/IOC1_4 J3 GPIO8 Not used on board * 109 PT5/IOC1_5 J3 GPIO9 " " " " "" " " * 108 PT6/IOC1_6 J3 GPIO10 " " " " "" " " * 107 PT7/IOC1_7 N/C N/C * * 30 PS0/RXD0 RS232_RX Eventually maps to J2 RXD * 31 PS1/TXD0 RS232_TX Eventually maps to J2 TXD * 32 PS2/RXD1 J3&J4 UART_RX Not used on board * 33 PS3/TXD1 J3&J4 UART_TX " " " " "" " " * 34 PS4/MISO J3 SPI_MISO " " " " "" " " * 35 PS5/MOSI J3 SPI_MOSI " " " " "" " " * 36 PS6/SCK J3 SPI_CLOCK " " " " "" " " * 37 PS7/SS_B J3 SPI_SS " " " " "" " " * * 22 PG0/RXD0/KWG0 J3 GPIO0 Not used on board * 23 PG1/RXD1/KWG1 J3 GPIO1 " " " " "" " " * 24 PG2/RXD2/KWG2 J3 GPIO2 " " " " "" " " * 25 PG3/RXD3/KWG3 J3 GPIO3 " " " " "" " " * 26 PG4/RXCLK/KWG4 J3 GPIO4 " " " " "" " " * 27 PG5/RXDV/KWG5 J3 GPIO5 " " " " "" " " * 28 PG6/RXER/KWG6 J3 GPIO6 " " " " "" " " * 29 PG7/KWG7 J3 GPIO7 " " " " "" " " * * 7 PH0/TXD0/KWH0 N/C N/C * 6 PH1/TXD1/KWH1 N/C N/C * 5 PH2/TXD2/KWH2 J4 XBEE_RESET Not used on board * 4 PH3/TXD3/KWH3 J4 XBEE_RSSI Not used on board * 3 PH4/TXCLK/KWH4 BUTTON2 SW2 * 2 PH5/TXDV/KWH5 J5 XBEE_LOAD_H Not used on board * 1 PH6/TXER/KWH6 J4 XBEE_LOAD_L Not used on board */ #define NE64BADGE_BUTTON2 (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT_H | GPIO_PIN_4) /* 8 PJ0/MDC/KWJ0 LED1 D21, red * 9 PJ1/MDIO/KWJ1 LED2 D22, red * 20 PJ2/CRS/KWJ2 J3 SPI_CS Not used on board * 21 PJ3/COL/KWJ3 N/C * 112 PJ6/SDA/KWJ6 J3 I2C_DATA Not used on board * 111 PJ7/SCL/KWJ7 J3 I2C_CLOCK " " " " "" " " */ #define NE64BADGE_LED1 (GPIO_OUTPUT | GPIO_OUTPUT_HIGH | GPIO_PORT_J | GPIO_PIN_0) #define NE64BADGE_LED2 (GPIO_OUTPUT | GPIO_OUTPUT_HIGH | GPIO_PORT_J | GPIO_PIN_1) /* 51 PL6/TXER/KWL6 N/C N/C * 52 PL5/TXDV/KWL5 N/C N/C * 58 PL4/COLLED Collision LED red * 59 PL3/DUPLED Full Duplex LED yellow * 81 PL2/SPDLED 100Mbps Speed LED yellow * 83 PL1/LNKLED Link Good LED green * 84 PL0/ACTLED Activity LED yellow */ /************************************************************************************ * Public Types ************************************************************************************/ /************************************************************************************ * Public data ************************************************************************************/ #ifndef __ASSEMBLY__ /************************************************************************************ * Public Functions ************************************************************************************/ /************************************************************************************ * Name: hcs12_spidev_initialize * * Description: * Called to configure SPI chip select GPIO pins for the STM3210E-EVAL board. * ************************************************************************************/ void weak_function hcs12_spidev_initialize(void); #endif /* __ASSEMBLY__ */ #endif /* __CONFIGS_NE64BADGE_SRC_NE64BADGE_H */