#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_IEEE80211_BROADCOM_FWFILES is not set
# CONFIG_MMCSD_HAVE_CARDDETECT is not set
# CONFIG_MMCSD_MMCSUPPORT is not set
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_NSH_CMDPARMS is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="emw3162"
CONFIG_ARCH_BOARD_EMW3162=y
CONFIG_ARCH_CHIP="stm32"
CONFIG_ARCH_CHIP_STM32=y
CONFIG_ARCH_CHIP_STM32F205RG=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_BOARD_LOOPSPERMSEC=16717
CONFIG_BUILTIN=y
CONFIG_DRIVERS_IEEE80211=y
CONFIG_DRIVERS_WIRELESS=y
CONFIG_EMW3162_WLAN=y
CONFIG_FS_PROCFS=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_IEEE80211_BROADCOM_BCM43362=y
CONFIG_IEEE80211_BROADCOM_DMABUF_ALIGNMENT=16
CONFIG_IEEE80211_BROADCOM_FULLMAC_SDIO=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LIBM=y
CONFIG_MMCSD=y
CONFIG_MMCSD_SDIO=y
CONFIG_MM_REGIONS=2
CONFIG_NET=y
CONFIG_NETDB_DNSCLIENT=y
CONFIG_NETDEVICES=y
CONFIG_NETDEV_LATEINIT=y
CONFIG_NETDEV_WIRELESS_IOCTL=y
CONFIG_NETINIT_DHCPC=y
CONFIG_NETINIT_DRIPADDR=0xc0a80001
CONFIG_NETUTILS_DHCPC=y
CONFIG_NETUTILS_TELNETD=y
CONFIG_NET_BROADCAST=y
CONFIG_NET_ETH_PKTSIZE=800
CONFIG_NET_GUARDSIZE=32
CONFIG_NET_ICMP=y
CONFIG_NET_ICMP_SOCKET=y
CONFIG_NET_PKT=y
CONFIG_NET_TCP=y
CONFIG_NET_UDP=y
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=114688
CONFIG_RAM_START=0x20000000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONFIG_RTC_DATETIME=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_WAITPID=y
CONFIG_SDIO_BLOCKSETUP=y
CONFIG_START_DAY=6
CONFIG_START_MONTH=12
CONFIG_START_YEAR=2011
CONFIG_STM32_DMA2=y
CONFIG_STM32_JTAG_SW_ENABLE=y
CONFIG_STM32_PWR=y
CONFIG_STM32_RTC=y
CONFIG_STM32_SDIO=y
CONFIG_STM32_SDIO_CARD=y
CONFIG_STM32_SDIO_PULLUP=y
CONFIG_STM32_USART1=y
CONFIG_SYSLOG_CHAR=y
CONFIG_SYSLOG_DEVPATH="/dev/ttyS0"
CONFIG_SYSTEM_NSH=y
CONFIG_SYSTEM_PING=y
CONFIG_USART1_SERIAL_CONSOLE=y
CONFIG_WIRELESS_WAPI=y
CONFIG_WIRELESS_WAPI_CMDTOOL=y