/**************************************************************************** * boards/arm/s32k3xx/mr-canhubk3/scripts/flash.ld * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /* Copyright 2022 NXP */ /* TO DO: ADD DESCRIPTION * * 0x00400000 - 0x007fffff 4194304 Program Flash (last 64K sBAF) * 0x10000000 - 0x1003ffff 262144 Data Flash (last 32K HSE_NVM) * 0x20400000 - 0x20408000 32768 Standby RAM_0 (32K) * 0x20400000 - 0x20427fff 163840 SRAM_0 * 0x20428000 - 0x2044ffff 163840 SRAM_1 * * Last 48 KB of SRAM_1 reserved by HSE Firmware * Last 128 KB of CODE_FLASH_3 reserved by HSE Firmware * Last 128 KB of DATA_FLASH reserved by HSE Firmware (not supported in this linker file) * * Note Standby RAM and SRAM overlaps in NuttX since we dont use the Standby functionality * */ MEMORY { BOOT_HEADER (R) : ORIGIN = 0x00400000, LENGTH = 0x00001000 /* 0x00400000 - 0x00400fff */ flash (rx) : ORIGIN = 0x00401000, LENGTH = 0x003cffff /* 0x00401000 - (0x007fffff - 0x20000 (128 KB) = 0x007dffff) */ sram0_stdby (rwx) : ORIGIN = 0x20400000, LENGTH = 32K sram (rwx) : ORIGIN = 0x20400000, LENGTH = 272K itcm (rwx) : ORIGIN = 0x00000000, LENGTH = 64K dtcm (rwx) : ORIGIN = 0x20000000, LENGTH = 128K } OUTPUT_ARCH(arm) EXTERN(_vectors) EXTERN(boot_header) ENTRY(_stext) SECTIONS { .boot_header : { KEEP(*(.boot_header)) } > BOOT_HEADER .text : { _stext = ABSOLUTE(.); *(.vectors) *(.text.__start) *(.text .text.*) *(.fixup) *(.gnu.warning) *(.rodata .rodata.*) *(.gnu.linkonce.t.*) *(.glue_7) *(.glue_7t) *(.got) *(.gcc_except_table) *(.gnu.linkonce.r.*) _etext = ABSOLUTE(.); } > flash .init_section : { _sinit = ABSOLUTE(.); KEEP(*(.init_array .init_array.*)) _einit = ABSOLUTE(.); } > flash .ARM.extab : { *(.ARM.extab*) } >flash .ARM.exidx : { __exidx_start = ABSOLUTE(.); *(.ARM.exidx*) __exidx_end = ABSOLUTE(.); } >flash /* Due ECC initialization sequence __data_start__ and __data_end__ should be aligned on 8 bytes */ .data : { . = ALIGN(8); _sdata = ABSOLUTE(.); *(.data .data.*) *(.gnu.linkonce.d.*) CONSTRUCTORS . = ALIGN(8); _edata = ABSOLUTE(.); } > sram AT > flash _eronly = LOADADDR(.data); .ramfunc ALIGN(8): { _sramfuncs = ABSOLUTE(.); *(.ramfunc .ramfunc.*) _eramfuncs = ABSOLUTE(.); } > sram AT > flash _framfuncs = LOADADDR(.ramfunc); /* Due ECC initialization sequence __bss_start__ and __bss_end__ should be aligned on 8 bytes */ .bss : { . = ALIGN(8); _sbss = ABSOLUTE(.); *(.bss .bss.*) *(.gnu.linkonce.b.*) *(COMMON) . = ALIGN(8); _ebss = ABSOLUTE(.); } > sram CM7_0_START_ADDRESS = ORIGIN(flash); /* Stabs debugging sections. */ .stab 0 : { *(.stab) } .stabstr 0 : { *(.stabstr) } .stab.excl 0 : { *(.stab.excl) } .stab.exclstr 0 : { *(.stab.exclstr) } .stab.index 0 : { *(.stab.index) } .stab.indexstr 0 : { *(.stab.indexstr) } .comment 0 : { *(.comment) } .debug_abbrev 0 : { *(.debug_abbrev) } .debug_info 0 : { *(.debug_info) } .debug_line 0 : { *(.debug_line) } .debug_pubnames 0 : { *(.debug_pubnames) } .debug_aranges 0 : { *(.debug_aranges) } SRAM_BASE_ADDR = ORIGIN(sram); SRAM_END_ADDR = ORIGIN(sram) + LENGTH(sram); SRAM_STDBY_BASE_ADDR = ORIGIN(sram0_stdby); SRAM_STDBY_END_ADDR = ORIGIN(sram0_stdby) + LENGTH(sram0_stdby); SRAM_INIT_END_ADDR = ORIGIN(sram) + 320K; ITCM_BASE_ADDR = ORIGIN(itcm); ITCM_END_ADDR = ORIGIN(itcm) + LENGTH(itcm); DTCM_BASE_ADDR = ORIGIN(dtcm); DTCM_END_ADDR = ORIGIN(dtcm) + LENGTH(dtcm); FLASH_BASE_ADDR = ORIGIN(BOOT_HEADER); FLASH_END_ADDR = ORIGIN(flash) + LENGTH(flash); }