/****************************************************************************
 * boards/mips/pic32mz/pic32mz-starterkit/src/pic32mz_autoleds.c
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <stdint.h>
#include <stdbool.h>
#include <debug.h>

#include <nuttx/board.h>
#include <arch/board/board.h>

#include "mips_internal.h"
#include "pic32mz_gpio.h"
#include "pic32mz-starterkit.h"

#ifdef CONFIG_ARCH_LEDS

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/* LED Configuration ********************************************************/

/* The PIC32MZ Ethernet Starter kit has 3 user LEDs labelled LED1-3 on the
 * board:
 *
 *   PIN  LED   Notes
 *   ---  ----- -------------------------
 *   RH0  LED1  High illuminates (RED)
 *   RH1  LED3  High illuminates (YELLOW)
 *   RH2  LED2  High illuminates (GREEN)
 *
 * If CONFIG_ARCH_LEDs is defined, then NuttX will control the 3 LEDs
 * on board the Ethernet Starter Kit.  The following definitions
 * describe how NuttX controls the LEDs:
 *
 *                           ON                  OFF
 * ------------------------- ---- ---- ---- ---- ---- ----
 *                           LED1 LED2 LED3 LED1 LED2 LED3
 * ------------------------- ---- ---- ---- ---- ---- ----
 * LED_STARTED            0  OFF  OFF  OFF  ---  ---  ---
 * LED_HEAPALLOCATE       1  ON   OFF  N/C  ---  ---  ---
 * LED_IRQSENABLED        2  OFF  ON   N/C  ---  ---  ---
 * LED_STACKCREATED       3  ON   ON   N/C  ---  ---  ---
 * LED_INIRQ              4  N/C  N/C  ON   N/C  N/C  OFF
 * LED_SIGNAL             4  N/C  N/C  ON   N/C  N/C  OFF
 * LED_ASSERTION          4  N/C  N/C  ON   N/C  N/C  OFF
 * LED_PANIC              5  ON   N/C  N/C  OFF  N/C  N/C
 */

/* LED Management Definitions ***********************************************/

#define LED_OFF 0
#define LED_ON  1
#define LED_NC  2

/****************************************************************************
 * Private types
 ****************************************************************************/

struct led_setting_s
{
  uint8_t led1   : 2;
  uint8_t led2   : 2;
  uint8_t led3   : 2;
  uint8_t unused : 2;
};

/****************************************************************************
 * Private Data
 ****************************************************************************/

/* If CONFIG_ARCH_LEDS is defined then NuttX will control the LEDs.  The
 * following structures identified the LED settings for each NuttX LED state.
 */

static const struct led_setting_s g_ledonvalues[LED_NVALUES] =
{
  {LED_OFF, LED_OFF, LED_OFF, LED_OFF},
  {LED_ON,  LED_OFF, LED_NC,  LED_OFF},
  {LED_OFF, LED_ON,  LED_NC,  LED_OFF},
  {LED_ON,  LED_ON,  LED_NC,  LED_OFF},
  {LED_NC,  LED_NC,  LED_ON,  LED_OFF},
  {LED_ON,  LED_NC,  LED_NC,  LED_OFF},
};

static const struct led_setting_s g_ledoffvalues[LED_NVALUES] =
{
  {LED_NC,  LED_NC,  LED_NC,  LED_OFF},
  {LED_NC,  LED_NC,  LED_NC,  LED_OFF},
  {LED_NC,  LED_NC,  LED_NC,  LED_OFF},
  {LED_NC,  LED_NC,  LED_NC,  LED_OFF},
  {LED_NC,  LED_NC,  LED_OFF, LED_OFF},
  {LED_OFF, LED_NC,  LED_NC,  LED_OFF},
};

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Name: pic32mz_setleds
 ****************************************************************************/

static void pic32mz_setleds(const struct led_setting_s *setting)
{
  if (setting->led1 != LED_NC)
    {
      pic32mz_gpiowrite(GPIO_LED_1, setting->led1 == LED_ON);
    }

  if (setting->led2 != LED_NC)
    {
      pic32mz_gpiowrite(GPIO_LED_2, setting->led2 == LED_ON);
    }

  if (setting->led3 != LED_NC)
    {
      pic32mz_gpiowrite(GPIO_LED_3, setting->led3 == LED_ON);
    }
}

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: pic32mz_led_initialize
 ****************************************************************************/

void pic32mz_led_initialize(void)
{
  /* Configure output pins */

  pic32mz_configgpio(GPIO_LED_1);
  pic32mz_configgpio(GPIO_LED_2);
  pic32mz_configgpio(GPIO_LED_3);
}

/****************************************************************************
 * Name: board_autoled_on
 ****************************************************************************/

void board_autoled_on(int led)
{
  if ((unsigned)led < LED_NVALUES)
    {
      pic32mz_setleds(&g_ledonvalues[led]);
    }
}

/****************************************************************************
 * Name: board_autoled_off
 ****************************************************************************/

void board_autoled_off(int led)
{
  if ((unsigned)led < LED_NVALUES)
    {
      pic32mz_setleds(&g_ledoffvalues[led]);
    }
}

#endif /* CONFIG_ARCH_LEDS */