/**************************************************************************** * drivers/audio/cs43l22.h * * Copyright (C) 2017 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Reference: * "CS43L22 Ultra Low Power CODEC for Portable Audio Applications, Pre- * Production", September 2012, Rev 3.3, Wolfson Microelectronics * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __DRIVERS_AUDIO_CS43L22_H #define __DRIVERS_AUDIO_CS43L22_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #define getreg32(a) (*(volatile uint32_t *)(a)) #define putreg32(v,a) (*(volatile uint32_t *)(a) = (v)) #define getreg16(a) (*(volatile uint16_t *)(a)) #define putreg16(v,a) (*(volatile uint16_t *)(a) = (v)) #ifdef CONFIG_AUDIO /**************************************************************************** * Pre-Processor Definitions ****************************************************************************/ /* So far, I have not been able to get FLL lock interrupts. Worse, I have * been able to get the FLL to claim that it is locked at all even when * polling. What am I doing wrong? * * Hmmm.. seems unnecessary anyway */ #undef CS43L22_USE_FFLOCK_INT #undef CS43L22_USE_FFLOCK_POLL /* Registers Addresses ******************************************************/ #define CS43L22_ID_REV 0x01 /* Chip I.D. and Revision */ #define CS43L22_POWER_CTRL1 0x02 /* Power Control 1 */ #define CS43L22_POWER_CTRL2 0x04 /* Power Control 2 */ #define CS43L22_CLOCK_CTRL 0x05 /* Clocking Control */ #define CS43L22_INTERFACE_CTRL1 0x06 /* Interface Control 1 */ #define CS43L22_INTERFACE_CTRL2 0x07 /* Interface Control 2 */ #define CS43L22_PASS_SEL_A 0x08 /* Passthrough x Select: PassA */ #define CS43L22_PASS_SEL_B 0x09 /* Passthrough x Select: PassB */ #define CS43L22_ANLG_ZC_SR_SEL 0x0A /* Analog ZC and SR Settings */ #define CS43L22_PASS_GANG_CTRL 0x0C /* Passthrough Gang Control */ #define CS43L22_PLAYBACK_CTRL1 0x0D /* Playback Control 1 */ #define CS43L22_MISCLLNS_CTRL 0x0E /* Miscellaneous Controls */ #define CS43L22_PLAYBACK_CTRL2 0x0F /* Playback Control 2 */ #define CS43L22_PASS_VOL_A 0x14 /* Passthrough x Volume: PASSAVOL */ #define CS43L22_PASS_VOL_B 0x15 /* Passthrough x Volume: PASSBVOL */ #define CS43L22_PCM_VOL_A 0x1A /* PCMx Volume: PCMA */ #define CS43L22_PCM_VOL_B 0x1B /* PCMx Volume: PCMB */ #define CS43L22_BP_FREQ_ON_TIME 0x1C /* Beep Frequency & On Time */ #define CS43L22_BP_VOL_OFF_TIME 0x1D /* Beep Volume & Off Time */ #define CS43L22_BP_TONE_CFG 0x1E /* Beep & Tone Configuration */ #define CS43L22_TONE_CTRL 0x1F /* Tone Control */ #define CS43L22_MS_VOL_CTRL_A 0x20 /* Master Volume Control: MSTA */ #define CS43L22_MS_VOL_CTRL_B 0x21 /* Master Volume Control: MSTB */ #define CS43L22_HP_VOL_CTRL_A 0x22 /* Headphone Volume Control: HPA */ #define CS43L22_HP_VOL_CTRL_B 0x23 /* Headphone Volume Control: HPB */ #define CS43L22_SPK_VOL_CTRL_A 0x24 /* Speaker Volume Control: SPKA */ #define CS43L22_SPK_VOL_CTRL_B 0x25 /* Speaker Volume Control: SPKB */ #define CS43L22_PCM_CH_SWAP 0x26 /* PCM Channel Swap */ #define CS43L22_LIM_CTRL1 0x27 /* Limiter Control 1, Min/Max Thresholds */ #define CS43L22_LIM_CTRL2 0x28 /* Limiter Control 2, Release Rate */ #define CS43L22_LIM_ATTACK_RATE 0x29 /* Limiter Attack Rate */ #define CS43L22_STATUS 0x2E /* Status */ #define CS43L22_BAT_COMP 0x2F /* Battery Compensation */ #define CS43L22_VP_BAT_LEVEL 0x30 /* VP Battery Level */ #define CS43L22_SPK_STATUS 0x31 /* Speaker Status */ #define CS43L22_TEMP_MON_CTRL 0x32 /* Temperature Monitor Control */ #define CS43L22_THERMAL_FOLDBACK 0x33 /* Thermal Foldback */ #define CS43L22_CHRG_PUMP_FREQ 0x34 /* Charge Pump Frequency */ #define CS43L22_HPBMUTE (1 << 7) #define CS43L22_HPAMUTE (1 << 6) #define CS43L22_SPKBMUTE (1 << 5) #define CS43L22_SPKAMUTE (1 << 4) /* Register Default Values **************************************************/ /* Registers have some undocumented bits set on power up. * These probably should be retained on writes (?). */ #define CS43L22_ID_REV_DEFAULT 0xe3 /* Chip I.D. and Revision */ #define CS43L22_POWER_CTRL1_DEFAULT 0x01 /* Power Control 1 */ #define CS43L22_POWER_CTRL2_DEFAULT 0x05 /* Power Control 2 */ #define CS43L22_CLOCK_CTRL_DEFAULT 0xa0 /* Clocking Control */ #define CS43L22_INTERFACE_CTRL1_DEFAULT 0x00 /* Interface Control 1 */ #define CS43L22_INTERFACE_CTRL2_DEFAULT 0x00 /* Interface Control 2 */ #define CS43L22_PASS_SEL_A_DEFAULT 0x81 /* Passthrough x Select: PassA */ #define CS43L22_PASS_SEL_B_DEFAULT 0x81 /* Passthrough x Select: PassB */ #define CS43L22_ANLG_ZC_SR_SEL_DEFAULT 0xa5 /* Analog ZC and SR Settings */ #define CS43L22_PASS_GANG_CTRL_DEFAULT 0x00 /* Passthrough Gang Control */ #define CS43L22_PLAYBACK_CTRL1_DEFAULT 0x60 /* Playback Control 1 */ #define CS43L22_MISCLLNS_CTRL_DEFAULT 0x02 /* Miscellaneous Controls */ #define CS43L22_PLAYBACK_CTRL2_DEFAULT 0x00 /* Playback Control 2 */ #define CS43L22_PASS_VOL_A_DEFAULT 0x00 /* Passthrough x Volume: PASSAVOL */ #define CS43L22_PASS_VOL_B_DEFAULT 0x00 /* Passthrough x Volume: PASSBVOL */ #define CS43L22_PCM_VOL_A_DEFAULT 0x00 /* PCMx Volume: PCMA */ #define CS43L22_PCM_VOL_B_DEFAULT 0x00 /* PCMx Volume: PCMB */ #define CS43L22_BP_FREQ_ON_TIME_DEFAULT 0x00 /* Beep Frequency & On Time */ #define CS43L22_BP_VOL_OFF_TIME_DEFAULT 0x00 /* Beep Volume & Off Time */ #define CS43L22_BP_TONE_CFG_DEFAULT 0x00 /* Beep & Tone Configuration */ #define CS43L22_TONE_CTRL_DEFAULT 0x88 /* Tone Control */ #define CS43L22_MS_VOL_CTRL_A_DEFAULT 0x00 /* Master Volume Control: MSTA */ #define CS43L22_MS_VOL_CTRL_B_DEFAULT 0x00 /* Master Volume Control: MSTB */ #define CS43L22_HP_VOL_CTRL_A_DEFAULT 0x00 /* Headphone Volume Control: HPA */ #define CS43L22_HP_VOL_CTRL_B_DEFAULT 0x00 /* Headphone Volume Control: HPB */ #define CS43L22_SPK_VOL_CTRL_A_DEFAULT 0x00 /* Speaker Volume Control: SPKA */ #define CS43L22_SPK_VOL_CTRL_B_DEFAULT 0x00 /* Speaker Volume Control: SPKB */ #define CS43L22_PCM_CH_SWAP_DEFAULT 0x00 /* PCM Channel Swap */ #define CS43L22_LIM_CTRL1_DEFAULT 0x00 /* Limiter Control 1, Min/Max Thresholds */ #define CS43L22_LIM_CTRL2_DEFAULT 0x7f /* Limiter Control 2, Release Rate */ #define CS43L22_LIM_ATTACK_RATE_DEFAULT 0xc0 /* Limiter Attack Rate */ #define CS43L22_STATUS_DEFAULT 0x00 /* Status */ #define CS43L22_BAT_COMP_DEFAULT 0x00 /* Battery Compensation */ #define CS43L22_VP_BAT_LEVEL_DEFAULT 0x00 /* VP Battery Level */ #define CS43L22_SPK_STATUS_DEFAULT 0x00 /* Speaker Status */ #define CS43L22_TEMP_MON_CTRL_DEFAULT 0x3b /* Temperature Monitor Control */ #define CS43L22_THERMAL_FOLDBACK_DEFAULT 0x00 /* Thermal Foldback */ #define CS43L22_CHRG_PUMP_FREQ_DEFAULT 0x5f /* Charge Pump Frequency */ /* Register Bit Definitions *************************************************/ /* 0x01 Chip I.D. and Revision (Read Only) */ #define CS43L22_DEV_ID_REV (0xe3) #define CS43L22_ID_SHIFT (3) #define CS43L22_ID_MASK (0x1f << CS43L22_ID_SHIFT) #define CS43L22_REV_SHIFT (0) #define CS43L22_REV_MASK (0x07 << CS43L22_REV_SHIFT) /* 0x02 Power Control 1 */ #define CS43L22_POWER_DOWN (0x01) /* Powered Down */ #define CS43L22_POWER_UP (0x9e) /* Powered Up */ /* 0x04 Power Control 2 */ #define CS43L22_PDN_HPB_SHIFT (6) /* Bits 6-7: Headphone channel B Control */ #define CS43L22_PDN_HPB_ON_HW_PIN_LO (0 << CS43L22_PDN_HPB_SHIFT) /* PDN_HPx[1:0] 00 Headphone channel is ON when the SPK/HP_SW pin, 6, is LO * Headphone channel is OFF when the SPK/HP_SW pin, 6, is HI */ #define CS43L22_PDN_HPB_ON_HW_PIN_HI (1 << CS43L22_PDN_HPB_SHIFT) /* PDN_HPx[1:0] 01 Headphone channel is ON when the SPK/HP_SW pin, 6, is HI * Headphone channel is OFF when the SPK/HP_SW pin, 6, is LO */ #define CS43L22_PDN_HPB_ON (2 << CS43L22_PDN_HPB_SHIFT) /* PDN_HPx[1:0] 10 Headphone channel is always ON */ #define CS43L22_PDN_HPB_OFF (3 << CS43L22_PDN_HPB_SHIFT) /* PDN_HPx[1:0] 11 Headphone channel is always OFF */ #define CS43L22_PDN_HPA_SHIFT (4) /* Bits 4-5: Headphone channel A Control */ #define CS43L22_PDN_HPA_ON_HW_PIN_LO (0 << CS43L22_PDN_HPA_SHIFT) /* PDN_HPx[1:0] 00 Headphone channel is ON when the SPK/HP_SW pin, 6, is LO * Headphone channel is OFF when the SPK/HP_SW pin, 6, is HI */ #define CS43L22_PDN_HPA_ON_HW_PIN_HI (1 << CS43L22_PDN_HPA_SHIFT) /* PDN_HPx[1:0] 01 Headphone channel is ON when the SPK/HP_SW pin, 6, is HI * Headphone channel is OFF when the SPK/HP_SW pin, 6, is LO */ #define CS43L22_PDN_HPA_ON (2 << CS43L22_PDN_HPA_SHIFT) /* PDN_HPx[1:0] 10 Headphone channel is always ON */ #define CS43L22_PDN_HPA_OFF (3 << CS43L22_PDN_HPA_SHIFT) /* PDN_HPx[1:0] 11 Headphone channel is always OFF */ #define CS43L22_PDN_SPKB_SHIFT (2) /* Bits 2-3: Speaker channel B Control */ #define CS43L22_PDN_SPKB_ON_HW_PIN_LO (0 << CS43L22_PDN_SPKB_SHIFT) /* PDN_HPx[1:0] 00 Speaker channel is ON when the SPK/HP_SW pin, 6, is LO * Speaker channel is OFF when the SPK/HP_SW pin, 6, is HI */ #define CS43L22_PDN_SPKB_ON_HW_PIN_HI (1 << CS43L22_PDN_SPKB_SHIFT) /* PDN_HPx[1:0] 01 Speaker channel is ON when the SPK/HP_SW pin, 6, is HI * Speaker channel is OFF when the SPK/HP_SW pin, 6, is LO */ #define CS43L22_PDN_SPKB_ON (2 << CS43L22_PDN_SPKB_SHIFT) /* PDN_HPx[1:0] 10 Speaker channel is always ON */ #define CS43L22_PDN_SPKB_OFF (3 << CS43L22_PDN_SPKB_SHIFT) /* PDN_HPx[1:0] 11 Speaker channel is always OFF */ #define CS43L22_PDN_SPKA_SHIFT (0) /* Bits 0-1: Speaker channel A Control */ #define CS43L22_PDN_SPKA_ON_HW_PIN_LO (0 << CS43L22_PDN_SPKA_SHIFT) /* PDN_HPx[1:0] 00 Speaker channel is ON when the SPK/HP_SW pin, 6, is LO * Speaker channel is OFF when the SPK/HP_SW pin, 6, is HI */ #define CS43L22_PDN_SPKA_ON_HW_PIN_HI (1 << CS43L22_PDN_SPKA_SHIFT) /* PDN_HPx[1:0] 01 Speaker channel is ON when the SPK/HP_SW pin, 6, is HI * Speaker channel is OFF when the SPK/HP_SW pin, 6, is LO */ #define CS43L22_PDN_SPKA_ON (2 << CS43L22_PDN_SPKA_SHIFT) /* PDN_HPx[1:0] 10 Speaker channel is always ON */ #define CS43L22_PDN_SPKA_OFF (3 << CS43L22_PDN_SPKA_SHIFT) /* PDN_HPx[1:0] 11 Speaker channel is always OFF */ /* 0x05 Clocking Control */ #define CS43L22_AUTO_DETECT_ENABLE (1 << 7) /* Auto-detection of speed mode enable */ #define CS43L22_SPEED_SHIFT (5) /* Bits 5-6: Speed mode */ #define CS43L22_SPEED_DOUBLE (0 << CS43L22_SPEED_SHIFT) /* Slave: Double-Speed Mode (DSM - 50 kHz -100 kHz Fs) Master: MCLK=512 SCLK=64*/ #define CS43L22_SPEED_SINGLE (1 << CS43L22_SPEED_SHIFT) /* Slave: Single-Speed Mode (SSM - 4 kHz -50 kHz Fs) Master: MCLK=256 SCLK=64*/ #define CS43L22_SPEED_HALF (2 << CS43L22_SPEED_SHIFT) /* Slave: Half-Speed Mode (HSM - 12.5kHz -25 kHz Fs) Master: MCLK=128 SCLK=64*/ #define CS43L22_SPEED_QUARTER (3 << CS43L22_SPEED_SHIFT) /* Slave: Quarter-Speed Mode (QSM - 4 kHz -12.5 kHz Fs)Master: MCLK=128 SCLK=64*/ #define CS43L22_32k_GROUP_ENABLE (1 << 4) /* Bit 4: Specifies whether or not the input/output sample rate is 8 kHz, 16 kHz or 32 kHz */ #define CS43L22_VIDEOCLK_ENABLE (1 << 3) /* Bit 3: Specifies whether or not the external MCLK frequency is 27 MHz */ #define CS43L22_MCLK_LRCK_RATIO_SHIFT (1) /* Bits 1-2: Internal MCLK/LRCK Ratio */ #define CS43L22_RATIO_128_64 (0 << CS43L22_MCLK_LRCK_RATIO_SHIFT) /* RATIO[1:0] Internal MCLK Cycles per LRCK=128, SCLK/LRCK=64 Ratio in Master Mode */ #define CS43L22_RATIO_125_62 (1 << CS43L22_MCLK_LRCK_RATIO_SHIFT) /* RATIO[1:0] Internal MCLK Cycles per LRCK=125, SCLK/LRCK=62 Ratio in Master Mode */ #define CS43L22_RATIO_132_66 (2 << CS43L22_MCLK_LRCK_RATIO_SHIFT) /* RATIO[1:0] Internal MCLK Cycles per LRCK=132, SCLK/LRCK=66 Ratio in Master Mode */ #define CS43L22_RATIO_136_68 (3 << CS43L22_MCLK_LRCK_RATIO_SHIFT) /* RATIO[1:0] Internal MCLK Cycles per LRCK=136, SCLK/LRCK=68 Ratio in Master Mode */ #define CS43L22_CLKDIV2_ENABLE (1 << 0) /* Bit 0: Divided by 2 */ /* 0x06 Interface Control 1 */ #define CS43L22_MODE_MASTER (1 << 7) /* Configures the serial port I/O clocking */ #define CS43L22_SCLK_POLARITY_INVERT (1 << 6) /* Configures the polarity of the SCLK signal */ #define CS43L22_DSP_MODE_ENABLE (1 << 4) /* Configures a data-packed interface format for the DAC */ #define CS43L22_DAC_IF_FORMAT_SHIFT (2) /* Bits 2-3: Configures the digital interface format for data on SDIN */ #define CS43L22_DAC_IF_LEFT_JUSTIFIED (0 << CS43L22_DAC_IF_FORMAT_SHIFT) /* DACDIF[1:0] Left Justified, up to 24-bit data */ #define CS43L22_DAC_IF_I2S (1 << CS43L22_DAC_IF_FORMAT_SHIFT) /* DACDIF[1:0] I2S, up to 24-bit data */ #define CS43L22_DAC_IF_RIGHT_JUSTIFIED (2 << CS43L22_DAC_IF_FORMAT_SHIFT) /* DACDIF[1:0] Right Justified */ #define CS43L22_DAC_IF_RESERVED (3 << CS43L22_DAC_IF_FORMAT_SHIFT) /* DACDIF[1:0] Reserved */ #define CS43L22_AUDIO_WORD_LENGHT_SHIFT (0) /* Bits 0-1: Configures the audio sample word length used for the data into SDIN */ #define CS43L22_AWL_DSP_32_RJ_24 (0 << CS43L22_AUDIO_WORD_LENGHT_SHIFT) /* AWL[1:0] DSP Mode: 32-bit data, Right Justified: 24-bit data */ #define CS43L22_AWL_DSP_24_RJ_20 (1 << CS43L22_AUDIO_WORD_LENGHT_SHIFT) /* AWL[1:0] DSP Mode: 24-bit data, Right Justified: 20-bit data */ #define CS43L22_AWL_DSP_20_RJ_18 (2 << CS43L22_AUDIO_WORD_LENGHT_SHIFT) /* AWL[1:0] DSP Mode: 20-bit data, Right Justified: 18-bit data */ #define CS43L22_AWL_DSP_16_RJ_16 (3 << CS43L22_AUDIO_WORD_LENGHT_SHIFT) /* AWL[1:0] DSP Mode: 16 bit data, Right Justified: 16-bit data */ /* 0x0E Miscellaneous Controls */ #define CS43L22_FREEZE (1 << 3) /* Configures a hold on all register settings */ #define CS43L22_DEEMPHASIS_ENABLE (1 << 2) /* Configures a 15μs/50μs digital de-emphasis filter response on the headphone/line and speaker outputs */ /* 0x1F Tone Control */ #define CS43L22_TREB_GAIN_SHIFT (4) /* Sets the gain of the treble shelving filter */ #define CS43L22_TREB_GAIN(a) ((a) << CS43L22_TREB_GAIN_SHIFT) /* TREB[3:0] Gain Setting: */ /* 0000 +12.0 dB */ /* ··· ··· */ /* 0111 +1.5 dB */ /* 1000 0 dB */ /* 1001 -1.5 dB */ /* 1111 -10.5 dB */ /* Step Size: 1.5 dB */ #define CS43L22_BASS_GAIN_SHIFT (0) /* Sets the gain of the bass shelving filter */ #define CS43L22_BASS_GAIN(a) ((a) << CS43L22_BASS_GAIN_SHIFT) /* BASS[3:0] Gain Setting: */ /* 0000 +12.0 dB */ /* ··· ··· */ /* 0111 +1.5 dB */ /* 1000 0 dB */ /* 1001 -1.5 dB */ /* 1111 -10.5 dB */ /* Step Size: 1.5 dB */ /* FLL Configuration ********************************************************/ /* Default FLL configuration */ #define CS43L22_DEFAULT_SAMPRATE 11025 /* Initial sample rate */ #define CS43L22_DEFAULT_NCHANNELS 1 /* Initial number of channels */ #define CS43L22_DEFAULT_BPSAMP 16 /* Initial bits per sample */ #define CS43L22_NFLLRATIO 5 /* Number of FLL_RATIO values */ #define CS43L22_MINOUTDIV 4 /* Minimum FLL_OUTDIV divider */ #define CS43L22_MAXOUTDIV 64 /* Maximum FLL_OUTDIV divider */ #define CS43L22_BCLK_MAXDIV 20 /* Maximum BCLK divider */ #define CS43L22_FRAMELEN8 14 /* Bits per frame for 8-bit data */ #define CS43L22_FRAMELEN16 32 /* Bits per frame for 16-bit data */ /* Commonly defined and redefined macros */ #ifndef MIN # define MIN(a,b) (((a) < (b)) ? (a) : (b)) #endif #ifndef MAX # define MAX(a,b) (((a) > (b)) ? (a) : (b)) #endif /**************************************************************************** * Public Types ****************************************************************************/ struct cs43l22_dev_s { /* We are an audio lower half driver (We are also the upper "half" of * the CS43L22 driver with respect to the board lower half driver). * * Terminology: * Our "lower" half audio instances will be called dev for the publicly * visible version and "priv" for the version that only this driver * knows. From the point of view of this driver, it is the board lower * "half" that is referred to as "lower". */ struct audio_lowerhalf_s dev; /* CS43L22 audio lower half (this device) */ /* Our specific driver data goes here */ const FAR struct cs43l22_lower_s *lower; /* Pointer to the board lower functions */ FAR struct i2c_master_s *i2c; /* I2C driver to use */ FAR struct i2s_dev_s *i2s; /* I2S driver to use */ struct dq_queue_s pendq; /* Queue of pending buffers to be sent */ struct dq_queue_s doneq; /* Queue of sent buffers to be returned */ mqd_t mq; /* Message queue for receiving messages */ char mqname[16]; /* Our message queue name */ pthread_t threadid; /* ID of our thread */ uint32_t bitrate; /* Actual programmed bit rate */ sem_t pendsem; /* Protect pendq */ #ifdef CS43L22_USE_FFLOCK_INT struct work_s work; /* Interrupt work */ #endif uint16_t samprate; /* Configured samprate (samples/sec) */ #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME #ifndef CONFIG_AUDIO_EXCLUDE_BALANCE uint16_t balance; /* Current balance level (b16) */ #endif /* CONFIG_AUDIO_EXCLUDE_BALANCE */ uint8_t volume; /* Current volume level {0..63} */ #endif /* CONFIG_AUDIO_EXCLUDE_VOLUME */ uint8_t nchannels; /* Number of channels (1 or 2) */ uint8_t bpsamp; /* Bits per sample (8 or 16) */ volatile uint8_t inflight; /* Number of audio buffers in-flight */ #ifdef CS43L22_USE_FFLOCK_INT volatile bool locked; /* FLL is locked */ #endif bool running; /* True: Worker thread is running */ bool paused; /* True: Playing is paused */ bool mute; /* True: Output is muted */ #ifndef CONFIG_AUDIO_EXCLUDE_STOP bool terminating; /* True: Stop requested */ #endif bool reserved; /* True: Device is reserved */ volatile int result; /* The result of the last transfer */ }; /**************************************************************************** * Public Data ****************************************************************************/ #ifdef CONFIG_CS43L22_CLKDEBUG extern const uint8_t g_sysclk_scaleb1[CS43L22_BCLK_MAXDIV + 1]; extern const uint8_t g_fllratio[CS43L22_NFLLRATIO]; #endif /**************************************************************************** * Public Function Prototypes ****************************************************************************/ /**************************************************************************** * Name: cs43l22_readreg * * Description: * Read the specified 8-bit register from the CS43L22 device. * ****************************************************************************/ #if defined(CONFIG_CS43L22_REGDUMP) || defined(CONFIG_CS43L22_CLKDEBUG) struct cs43l22_dev_s; uint8_t cs43l22_readreg(FAR struct cs43l22_dev_s *priv, uint8_t regaddr); #endif #endif /* CONFIG_AUDIO */ #endif /* __DRIVERS_AUDIO_CS43L22_H */