/**************************************************************************** * drivers/net/cdcecm.c * * Copyright (C) 2018 Gregory Nutt. All rights reserved. * Authors: Michael Jung * * References: * [CDCECM1.2] Universal Serial Bus - Communications Class - Subclass * Specification for Ethernet Control Model Devices - Rev 1.2 * * This driver derives in part from the NuttX CDC/ACM driver: * * Copyright (C) 2011-2013, 2016-2017 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * and also from the NuttX RNDIS driver: * * Copyright (C) 2011-2017 Gregory Nutt. All rights reserved. * Authors: Sakari Kapanen , * Petteri Aimonen * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_NET_PKT # include #endif #include "cdcecm.h" #ifdef CONFIG_NET_CDCECM /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Work queue support is required. */ #if !defined(CONFIG_SCHED_WORKQUEUE) # error Work queue support is required in this configuration (CONFIG_SCHED_WORKQUEUE) #endif /* The low priority work queue is preferred. If it is not enabled, LPWORK * will be the same as HPWORK. NOTE: Use of the high priority work queue will * have a negative impact on interrupt handling latency and overall system * performance. This should be avoided. */ #define ETHWORK LPWORK /* CONFIG_CDCECM_NINTERFACES determines the number of physical interfaces * that will be supported. */ #ifndef CONFIG_CDCECM_NINTERFACES # define CONFIG_CDCECM_NINTERFACES 1 #endif /* TX poll delay = 1 seconds. CLK_TCK is the number of clock ticks per second */ #define CDCECM_WDDELAY (1*CLK_TCK) /* TX timeout = 1 minute */ #define CDCECM_TXTIMEOUT (60*CLK_TCK) /* This is a helper pointer for accessing the contents of the Ethernet header */ #define BUF ((struct eth_hdr_s *)self->dev.d_buf) /**************************************************************************** * Private Types ****************************************************************************/ /* The cdcecm_driver_s encapsulates all state information for a single hardware * interface */ struct cdcecm_driver_s { /* USB CDC-ECM device */ struct usbdevclass_driver_s usbdev; /* USB device class vtable */ struct usbdev_devinfo_s devinfo; FAR struct usbdev_req_s *ctrlreq; /* Allocated control request */ FAR struct usbdev_ep_s *epint; /* Interrupt IN endpoint */ FAR struct usbdev_ep_s *epbulkin; /* Bulk IN endpoint */ FAR struct usbdev_ep_s *epbulkout; /* Bulk OUT endpoint */ uint8_t config; /* Selected configuration number */ uint8_t pktbuf[CONFIG_NET_ETH_PKTSIZE + CONFIG_NET_GUARDSIZE]; struct usbdev_req_s *rdreq; /* Single read request */ bool rxpending; /* Packet available in rdreq */ struct usbdev_req_s *wrreq; /* Single write request */ sem_t wrreq_idle; /* Is the wrreq available? */ bool txdone; /* Did a write request complete? */ /* Network device */ bool bifup; /* true:ifup false:ifdown */ WDOG_ID txpoll; /* TX poll timer */ struct work_s irqwork; /* For deferring interrupt work * to the work queue */ struct work_s pollwork; /* For deferring poll work to * the work queue */ /* This holds the information visible to the NuttX network */ struct net_driver_s dev; /* Interface understood by the * network */ bool registered; /* netdev is currently registered */ }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* Network Device ***********************************************************/ /* Common TX logic */ static int cdcecm_transmit(FAR struct cdcecm_driver_s *priv); static int cdcecm_txpoll(FAR struct net_driver_s *dev); /* Interrupt handling */ static void cdcecm_reply(struct cdcecm_driver_s *priv); static void cdcecm_receive(FAR struct cdcecm_driver_s *priv); static void cdcecm_txdone(FAR struct cdcecm_driver_s *priv); static void cdcecm_interrupt_work(FAR void *arg); /* Watchdog timer expirations */ static void cdcecm_poll_work(FAR void *arg); static void cdcecm_poll_expiry(int argc, wdparm_t arg, ...); /* NuttX callback functions */ static int cdcecm_ifup(FAR struct net_driver_s *dev); static int cdcecm_ifdown(FAR struct net_driver_s *dev); static void cdcecm_txavail_work(FAR void *arg); static int cdcecm_txavail(FAR struct net_driver_s *dev); #if defined(CONFIG_NET_MCASTGROUP) || defined(CONFIG_NET_ICMPv6) static int cdcecm_addmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac); #ifdef CONFIG_NET_MCASTGROUP static int cdcecm_rmmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac); #endif #ifdef CONFIG_NET_ICMPv6 static void cdcecm_ipv6multicast(FAR struct cdcecm_driver_s *priv); #endif #endif #ifdef CONFIG_NETDEV_IOCTL static int cdcecm_ioctl(FAR struct net_driver_s *dev, int cmd, unsigned long arg); #endif /* USB Device Class Driver **************************************************/ /* USB Device Class methods */ static int cdcecm_bind(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev); static void cdcecm_unbind(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev); static int cdcecm_setup(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev, FAR const struct usb_ctrlreq_s *ctrl, FAR uint8_t *dataout, size_t outlen); static void cdcecm_disconnect(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev); /* USB Device Class helpers */ static struct usbdev_req_s *cdcecm_allocreq(FAR struct usbdev_ep_s *ep, uint16_t len); static void cdcecm_freereq(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req); static void cdcecm_ep0incomplete(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req); static void cdcecm_rdcomplete(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req); static void cdcecm_wrcomplete(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req); static void cdcecm_mkepdesc(int epidx, FAR struct usb_epdesc_s *epdesc, FAR struct usbdev_devinfo_s *devinfo, bool hispeed); /**************************************************************************** * Private Data ****************************************************************************/ /* USB Device Class Methods */ static const struct usbdevclass_driverops_s g_usbdevops = { cdcecm_bind, cdcecm_unbind, cdcecm_setup, cdcecm_disconnect, NULL, NULL }; #ifndef CONFIG_CDCECM_COMPOSITE static const struct usb_devdesc_s g_devdesc = { USB_SIZEOF_DEVDESC, USB_DESC_TYPE_DEVICE, { LSBYTE(0x0200), MSBYTE(0x0200) }, USB_CLASS_CDC, CDC_SUBCLASS_ECM, CDC_PROTO_NONE, CONFIG_CDCECM_EP0MAXPACKET, { LSBYTE(CONFIG_CDCECM_VENDORID), MSBYTE(CONFIG_CDCECM_VENDORID) }, { LSBYTE(CONFIG_CDCECM_PRODUCTID), MSBYTE(CONFIG_CDCECM_PRODUCTID) }, { LSBYTE(CDCECM_VERSIONNO), MSBYTE(CDCECM_VERSIONNO) }, CDCECM_MANUFACTURERSTRID, CDCECM_PRODUCTSTRID, CDCECM_SERIALSTRID, CDCECM_NCONFIGS }; #endif /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: cdcecm_transmit * * Description: * Start hardware transmission. Called either from the txdone interrupt * handling or from watchdog based polling. * * Input Parameters: * priv - Reference to the driver state structure * * Returned Value: * OK on success; a negated errno on failure * * Assumptions: * The network is locked. * ****************************************************************************/ static int cdcecm_transmit(FAR struct cdcecm_driver_s *self) { /* Wait until the USB device request for Ethernet frame transmissions becomes * available. */ while (nxsem_wait(&self->wrreq_idle) != OK) { } /* Increment statistics */ NETDEV_TXPACKETS(self->dev); /* Send the packet: address=priv->dev.d_buf, length=priv->dev.d_len */ memcpy(self->wrreq->buf, self->dev.d_buf, self->dev.d_len); self->wrreq->len = self->dev.d_len; return EP_SUBMIT(self->epbulkin, self->wrreq); } /**************************************************************************** * Name: cdcecm_txpoll * * Description: * The transmitter is available, check if the network has any outgoing * packets ready to send. This is a callback from devif_poll(). * devif_poll() may be called: * * 1. When the preceding TX packet send is complete, * 2. When the preceding TX packet send times out and the interface is reset * 3. During normal TX polling * * Input Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * OK on success; a negated errno on failure * * Assumptions: * The network is locked. * ****************************************************************************/ static int cdcecm_txpoll(FAR struct net_driver_s *dev) { FAR struct cdcecm_driver_s *priv = (FAR struct cdcecm_driver_s *)dev->d_private; /* If the polling resulted in data that should be sent out on the network, * the field d_len is set to a value > 0. */ if (priv->dev.d_len > 0) { /* Look up the destination MAC address and add it to the Ethernet * header. */ #ifdef CONFIG_NET_IPv4 #ifdef CONFIG_NET_IPv6 if (IFF_IS_IPv4(priv->dev.d_flags)) #endif { arp_out(&priv->dev); } #endif /* CONFIG_NET_IPv4 */ #ifdef CONFIG_NET_IPv6 #ifdef CONFIG_NET_IPv4 else #endif { neighbor_out(&priv->dev); } #endif /* CONFIG_NET_IPv6 */ if (!devif_loopback(&priv->dev)) { /* Send the packet */ cdcecm_transmit(priv); /* Check if there is room in the device to hold another packet. If * not, return a non-zero value to terminate the poll. */ return 1; } } /* If zero is returned, the polling will continue until all connections * have been examined. */ return 0; } /**************************************************************************** * Name: cdcecm_reply * * Description: * After a packet has been received and dispatched to the network, it * may return return with an outgoing packet. This function checks for * that case and performs the transmission if necessary. * * Input Parameters: * priv - Reference to the driver state structure * * Returned Value: * None * * Assumptions: * The network is locked. * ****************************************************************************/ static void cdcecm_reply(struct cdcecm_driver_s *priv) { /* If the packet dispatch resulted in data that should be sent out on the * network, the field d_len will set to a value > 0. */ if (priv->dev.d_len > 0) { /* Update the Ethernet header with the correct MAC address */ #ifdef CONFIG_NET_IPv4 #ifdef CONFIG_NET_IPv6 /* Check for an outgoing IPv4 packet */ if (IFF_IS_IPv4(priv->dev.d_flags)) #endif { arp_out(&priv->dev); } #endif #ifdef CONFIG_NET_IPv6 #ifdef CONFIG_NET_IPv4 /* Otherwise, it must be an outgoing IPv6 packet */ else #endif { neighbor_out(&priv->dev); } #endif /* And send the packet */ cdcecm_transmit(priv); } } /**************************************************************************** * Name: cdcecm_receive * * Description: * An interrupt was received indicating the availability of a new RX packet * * Input Parameters: * priv - Reference to the driver state structure * * Returned Value: * None * * Assumptions: * The network is locked. * ****************************************************************************/ static void cdcecm_receive(FAR struct cdcecm_driver_s *self) { /* Check for errors and update statistics */ /* Check if the packet is a valid size for the network buffer * configuration. */ /* Copy the data data from the hardware to self->dev.d_buf. Set * amount of data in self->dev.d_len */ memcpy(self->dev.d_buf, self->rdreq->buf, self->rdreq->xfrd); self->dev.d_len = self->rdreq->xfrd; #ifdef CONFIG_NET_PKT /* When packet sockets are enabled, feed the frame into the packet tap */ pkt_input(&self->dev); #endif /* We only accept IP packets of the configured type and ARP packets */ #ifdef CONFIG_NET_IPv4 if (BUF->type == HTONS(ETHTYPE_IP)) { ninfo("IPv4 frame\n"); NETDEV_RXIPV4(&self->dev); /* Handle ARP on input, then dispatch IPv4 packet to the network * layer. */ arp_ipin(&self->dev); ipv4_input(&self->dev); /* Check for a reply to the IPv4 packet */ cdcecm_reply(self); } else #endif #ifdef CONFIG_NET_IPv6 if (BUF->type == HTONS(ETHTYPE_IP6)) { ninfo("Iv6 frame\n"); NETDEV_RXIPV6(&self->dev); /* Dispatch IPv6 packet to the network layer */ ipv6_input(&self->dev); /* Check for a reply to the IPv6 packet */ cdcecm_reply(self); } else #endif #ifdef CONFIG_NET_ARP if (BUF->type == htons(ETHTYPE_ARP)) { /* Dispatch ARP packet to the network layer */ arp_arpin(&self->dev); NETDEV_RXARP(&self->dev); /* If the above function invocation resulted in data that should be * sent out on the network, the field d_len will set to a value > 0. */ if (self->dev.d_len > 0) { cdcecm_transmit(self); } } else #endif { NETDEV_RXDROPPED(&self->dev); } } /**************************************************************************** * Name: cdcecm_txdone * * Description: * An interrupt was received indicating that the last TX packet(s) is done * * Input Parameters: * priv - Reference to the driver state structure * * Returned Value: * None * * Assumptions: * The network is locked. * ****************************************************************************/ static void cdcecm_txdone(FAR struct cdcecm_driver_s *priv) { /* Check for errors and update statistics */ NETDEV_TXDONE(priv->dev); /* In any event, poll the network for new TX data */ (void)devif_poll(&priv->dev, cdcecm_txpoll); } /**************************************************************************** * Name: cdcecm_interrupt_work * * Description: * Perform interrupt related work from the worker thread * * Input Parameters: * arg - The argument passed when work_queue() was called. * * Returned Value: * OK on success * * Assumptions: * Runs on a worker thread. * ****************************************************************************/ static void cdcecm_interrupt_work(FAR void *arg) { FAR struct cdcecm_driver_s *self = (FAR struct cdcecm_driver_s *)arg; irqstate_t flags; /* Lock the network and serialize driver operations if necessary. * NOTE: Serialization is only required in the case where the driver work * is performed on an LP worker thread and where more than one LP worker * thread has been configured. */ net_lock(); /* Check if we received an incoming packet, if so, call cdcecm_receive() */ if (self->rxpending) { cdcecm_receive(self); flags = enter_critical_section(); self->rxpending = false; EP_SUBMIT(self->epbulkout, self->rdreq); leave_critical_section(flags); } /* Check if a packet transmission just completed. If so, call cdcecm_txdone. * This may disable further Tx interrupts if there are no pending * transmissions. */ if (self->txdone) { flags = enter_critical_section(); self->txdone = false; leave_critical_section(flags); cdcecm_txdone(self); } net_unlock(); } /**************************************************************************** * Name: cdcecm_poll_work * * Description: * Perform periodic polling from the worker thread * * Input Parameters: * arg - The argument passed when work_queue() as called. * * Returned Value: * OK on success * * Assumptions: * Run on a work queue thread. * ****************************************************************************/ static void cdcecm_poll_work(FAR void *arg) { FAR struct cdcecm_driver_s *self = (FAR struct cdcecm_driver_s *)arg; ninfo("rxpending: %d, txdone: %d\n", self->rxpending, self->txdone); /* Lock the network and serialize driver operations if necessary. * NOTE: Serialization is only required in the case where the driver work * is performed on an LP worker thread and where more than one LP worker * thread has been configured. */ net_lock(); /* Perform the poll. We are always able to accept another packet, since * cdcecm_transmit will just wait until the USB device write request will * become available. */ (void)devif_timer(&self->dev, cdcecm_txpoll); /* Setup the watchdog poll timer again */ (void)wd_start(self->txpoll, CDCECM_WDDELAY, cdcecm_poll_expiry, 1, (wdparm_t)self); net_unlock(); } /**************************************************************************** * Name: cdcecm_poll_expiry * * Description: * Periodic timer handler. Called from the timer interrupt handler. * * Input Parameters: * argc - The number of available arguments * arg - The first argument * * Returned Value: * None * * Assumptions: * Runs in the context of a the timer interrupt handler. Local * interrupts are disabled by the interrupt logic. * ****************************************************************************/ static void cdcecm_poll_expiry(int argc, wdparm_t arg, ...) { FAR struct cdcecm_driver_s *priv = (FAR struct cdcecm_driver_s *)arg; /* Schedule to perform the interrupt processing on the worker thread. */ work_queue(ETHWORK, &priv->pollwork, cdcecm_poll_work, priv, 0); } /**************************************************************************** * Name: cdcecm_ifup * * Description: * NuttX Callback: Bring up the Ethernet interface when an IP address is * provided * * Input Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * None * * Assumptions: * The network is locked. * ****************************************************************************/ static int cdcecm_ifup(FAR struct net_driver_s *dev) { FAR struct cdcecm_driver_s *priv = (FAR struct cdcecm_driver_s *)dev->d_private; #ifdef CONFIG_NET_IPv4 ninfo("Bringing up: %d.%d.%d.%d\n", dev->d_ipaddr & 0xff, (dev->d_ipaddr >> 8) & 0xff, (dev->d_ipaddr >> 16) & 0xff, dev->d_ipaddr >> 24); #endif #ifdef CONFIG_NET_IPv6 ninfo("Bringing up: %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n", dev->d_ipv6addr[0], dev->d_ipv6addr[1], dev->d_ipv6addr[2], dev->d_ipv6addr[3], dev->d_ipv6addr[4], dev->d_ipv6addr[5], dev->d_ipv6addr[6], dev->d_ipv6addr[7]); #endif /* Initialize PHYs, the Ethernet interface, and setup up Ethernet interrupts */ /* Instantiate the MAC address from priv->dev.d_mac.ether.ether_addr_octet */ #ifdef CONFIG_NET_ICMPv6 /* Set up IPv6 multicast address filtering */ cdcecm_ipv6multicast(priv); #endif /* Set and activate a timer process */ (void)wd_start(priv->txpoll, CDCECM_WDDELAY, cdcecm_poll_expiry, 1, (wdparm_t)priv); priv->bifup = true; return OK; } /**************************************************************************** * Name: cdcecm_ifdown * * Description: * NuttX Callback: Stop the interface. * * Input Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * None * * Assumptions: * The network is locked. * ****************************************************************************/ static int cdcecm_ifdown(FAR struct net_driver_s *dev) { FAR struct cdcecm_driver_s *priv = (FAR struct cdcecm_driver_s *)dev->d_private; irqstate_t flags; /* Disable the Ethernet interrupt */ flags = enter_critical_section(); /* Cancel the TX poll timer and TX timeout timers */ wd_cancel(priv->txpoll); /* Put the EMAC in its reset, non-operational state. This should be * a known configuration that will guarantee the cdcecm_ifup() always * successfully brings the interface back up. */ /* Mark the device "down" */ priv->bifup = false; leave_critical_section(flags); return OK; } /**************************************************************************** * Name: cdcecm_txavail_work * * Description: * Perform an out-of-cycle poll on the worker thread. * * Input Parameters: * arg - Reference to the NuttX driver state structure (cast to void*) * * Returned Value: * None * * Assumptions: * Runs on a work queue thread. * ****************************************************************************/ static void cdcecm_txavail_work(FAR void *arg) { FAR struct cdcecm_driver_s *self = (FAR struct cdcecm_driver_s *)arg; /* Lock the network and serialize driver operations if necessary. * NOTE: Serialization is only required in the case where the driver work * is performed on an LP worker thread and where more than one LP worker * thread has been configured. */ net_lock(); /* Ignore the notification if the interface is not yet up */ if (self->bifup) { (void)devif_poll(&self->dev, cdcecm_txpoll); } net_unlock(); } /**************************************************************************** * Name: cdcecm_txavail * * Description: * Driver callback invoked when new TX data is available. This is a * stimulus perform an out-of-cycle poll and, thereby, reduce the TX * latency. * * Input Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * None * * Assumptions: * The network is locked. * ****************************************************************************/ static int cdcecm_txavail(FAR struct net_driver_s *dev) { FAR struct cdcecm_driver_s *priv = (FAR struct cdcecm_driver_s *)dev->d_private; /* Is our single work structure available? It may not be if there are * pending interrupt actions and we will have to ignore the Tx * availability action. */ if (work_available(&priv->pollwork)) { /* Schedule to serialize the poll on the worker thread. */ work_queue(ETHWORK, &priv->pollwork, cdcecm_txavail_work, priv, 0); } return OK; } /**************************************************************************** * Name: cdcecm_addmac * * Description: * NuttX Callback: Add the specified MAC address to the hardware multicast * address filtering * * Input Parameters: * dev - Reference to the NuttX driver state structure * mac - The MAC address to be added * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ****************************************************************************/ #if defined(CONFIG_NET_MCASTGROUP) || defined(CONFIG_NET_ICMPv6) static int cdcecm_addmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac) { FAR struct cdcecm_driver_s *priv = (FAR struct cdcecm_driver_s *)dev->d_private; /* Add the MAC address to the hardware multicast routing table */ UNUSED(priv); /* Not yet implemented */ return OK; } #endif /**************************************************************************** * Name: cdcecm_rmmac * * Description: * NuttX Callback: Remove the specified MAC address from the hardware multicast * address filtering * * Input Parameters: * dev - Reference to the NuttX driver state structure * mac - The MAC address to be removed * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ****************************************************************************/ #ifdef CONFIG_NET_MCASTGROUP static int cdcecm_rmmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac) { FAR struct cdcecm_driver_s *priv = (FAR struct cdcecm_driver_s *)dev->d_private; /* Add the MAC address to the hardware multicast routing table */ UNUSED(priv); /* Not yet implemented */ return OK; } #endif /**************************************************************************** * Name: cdcecm_ipv6multicast * * Description: * Configure the IPv6 multicast MAC address. * * Input Parameters: * priv - A reference to the private driver state structure * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ****************************************************************************/ #ifdef CONFIG_NET_ICMPv6 static void cdcecm_ipv6multicast(FAR struct cdcecm_driver_s *priv) { FAR struct net_driver_s *dev; uint16_t tmp16; uint8_t mac[6]; /* For ICMPv6, we need to add the IPv6 multicast address * * For IPv6 multicast addresses, the Ethernet MAC is derived by * the four low-order octets OR'ed with the MAC 33:33:00:00:00:00, * so for example the IPv6 address FF02:DEAD:BEEF::1:3 would map * to the Ethernet MAC address 33:33:00:01:00:03. * * NOTES: This appears correct for the ICMPv6 Router Solicitation * Message, but the ICMPv6 Neighbor Solicitation message seems to * use 33:33:ff:01:00:03. */ mac[0] = 0x33; mac[1] = 0x33; dev = &priv->dev; tmp16 = dev->d_ipv6addr[6]; mac[2] = 0xff; mac[3] = tmp16 >> 8; tmp16 = dev->d_ipv6addr[7]; mac[4] = tmp16 & 0xff; mac[5] = tmp16 >> 8; ninfo("IPv6 Multicast: %02x:%02x:%02x:%02x:%02x:%02x\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); (void)cdcecm_addmac(dev, mac); #ifdef CONFIG_NET_ICMPv6_AUTOCONF /* Add the IPv6 all link-local nodes Ethernet address. This is the * address that we expect to receive ICMPv6 Router Advertisement * packets. */ (void)cdcecm_addmac(dev, g_ipv6_ethallnodes.ether_addr_octet); #endif /* CONFIG_NET_ICMPv6_AUTOCONF */ #ifdef CONFIG_NET_ICMPv6_ROUTER /* Add the IPv6 all link-local routers Ethernet address. This is the * address that we expect to receive ICMPv6 Router Solicitation * packets. */ (void)cdcecm_addmac(dev, g_ipv6_ethallrouters.ether_addr_octet); #endif /* CONFIG_NET_ICMPv6_ROUTER */ } #endif /* CONFIG_NET_ICMPv6 */ /**************************************************************************** * Name: cdcecm_ioctl * * Description: * Handle network IOCTL commands directed to this device. * * Input Parameters: * dev - Reference to the NuttX driver state structure * cmd - The IOCTL command * arg - The argument for the IOCTL command * * Returned Value: * OK on success; Negated errno on failure. * * Assumptions: * The network is locked. * ****************************************************************************/ #ifdef CONFIG_NETDEV_IOCTL static int cdcecm_ioctl(FAR struct net_driver_s *dev, int cmd, unsigned long arg) { FAR struct cdcecm_driver_s *priv = (FAR struct cdcecm_driver_s *)dev->d_private; int ret; /* Decode and dispatch the driver-specific IOCTL command */ switch (cmd) { /* Add cases here to support the IOCTL commands */ default: nerr("ERROR: Unrecognized IOCTL command: %d\n", command); return -ENOTTY; /* Special return value for this case */ } return OK; } #endif /**************************************************************************** * USB Device Class Helpers ****************************************************************************/ /**************************************************************************** * Name: cdcecm_ep0incomplete * * Description: * Handle completion of EP0 control operations * ****************************************************************************/ static void cdcecm_ep0incomplete(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req) { if (req->result || req->xfrd != req->len) { uerr("result: %hd, xfrd: %hu\n", req->result, req->xfrd); } } /**************************************************************************** * Name: cdcecm_rdcomplete * * Description: * Handle completion of read request on the bulk OUT endpoint. * ****************************************************************************/ static void cdcecm_rdcomplete(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req) { FAR struct cdcecm_driver_s *self = (FAR struct cdcecm_driver_s *)ep->priv; uinfo("buf: %p, flags 0x%hhx, len %hu, xfrd %hu, result %hd\n", req->buf, req->flags, req->len, req->xfrd, req->result); switch (req->result) { case 0: /* Normal completion */ { DEBUGASSERT(!self->rxpending); self->rxpending = true; work_queue(ETHWORK, &self->irqwork, cdcecm_interrupt_work, self, 0); } break; case -ESHUTDOWN: /* Disconnection */ break; default: /* Some other error occurred */ { uerr("req->result: %hd\n", req->result); EP_SUBMIT(self->epbulkout, self->rdreq); } break; } } /**************************************************************************** * Name: cdcecm_wrcomplete * * Description: * Handle completion of write request. This function probably executes * in the context of an interrupt handler. * ****************************************************************************/ static void cdcecm_wrcomplete(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req) { FAR struct cdcecm_driver_s *self = (FAR struct cdcecm_driver_s *)ep->priv; int rc; uinfo("buf: %p, flags 0x%hhx, len %hu, xfrd %hu, result %hd\n", req->buf, req->flags, req->len, req->xfrd, req->result); /* The single USB device write request is available for upcoming * transmissions again. */ rc = nxsem_post(&self->wrreq_idle); if (rc != OK) { nerr("nxsem_post failed! rc: %d\n", rc); } /* Inform the network layer that an Ethernet frame was transmitted. */ self->txdone = true; work_queue(ETHWORK, &self->irqwork, cdcecm_interrupt_work, self, 0); } /**************************************************************************** * Name: cdcecm_allocreq * * Description: * Allocate a request instance along with its buffer * ****************************************************************************/ static struct usbdev_req_s *cdcecm_allocreq(FAR struct usbdev_ep_s *ep, uint16_t len) { FAR struct usbdev_req_s *req; req = EP_ALLOCREQ(ep); if (req != NULL) { req->len = len; req->buf = EP_ALLOCBUFFER(ep, len); req->flags = USBDEV_REQFLAGS_NULLPKT; if (req->buf == NULL) { EP_FREEREQ(ep, req); req = NULL; } } return req; } /**************************************************************************** * Name: cdcecm_freereq * * Description: * Free a request instance along with its buffer * ****************************************************************************/ static void cdcecm_freereq(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req) { if (ep != NULL && req != NULL) { if (req->buf != NULL) { EP_FREEBUFFER(ep, req->buf); } EP_FREEREQ(ep, req); } } /****************************************************************************** * Name: cdcecm_resetconfig * * Description: * Mark the device as not configured and disable all endpoints. * ******************************************************************************/ static void cdcecm_resetconfig(FAR struct cdcecm_driver_s *self) { /* Are we configured? */ if (self->config != CDCECM_CONFIGID_NONE) { /* Yes.. but not anymore */ self->config = CDCECM_CONFIGID_NONE; /* Inform the networking layer that the link is down */ self->dev.d_ifdown(&self->dev); /* Disable endpoints. This should force completion of all pending * transfers. */ EP_DISABLE(self->epint); EP_DISABLE(self->epbulkin); EP_DISABLE(self->epbulkout); } } /****************************************************************************** * Name: cdcecm_setconfig * * Set the device configuration by allocating and configuring endpoints and * by allocating and queue read and write requests. * ****************************************************************************/ static int cdcecm_setconfig(FAR struct cdcecm_driver_s *self, uint8_t config) { struct usb_epdesc_s epdesc; int ret = OK; if (config == self->config) { return OK; } cdcecm_resetconfig(self); if (config == CDCECM_CONFIGID_NONE) { return OK; } if (config != CDCECM_CONFIGID) { return -EINVAL; } cdcecm_mkepdesc(CDCECM_EP_INTIN_IDX, &epdesc, &self->devinfo, false); ret = EP_CONFIGURE(self->epint, &epdesc, false); if (ret < 0) { goto error; } self->epint->priv = self; cdcecm_mkepdesc(CDCECM_EP_BULKIN_IDX, &epdesc, &self->devinfo, false); ret = EP_CONFIGURE(self->epbulkin, &epdesc, false); if (ret < 0) { goto error; } self->epbulkin->priv = self; cdcecm_mkepdesc(CDCECM_EP_BULKOUT_IDX, &epdesc, &self->devinfo, false); ret = EP_CONFIGURE(self->epbulkout, &epdesc, true); if (ret < 0) { goto error; } self->epbulkout->priv = self; /* Queue read requests in the bulk OUT endpoint */ DEBUGASSERT(!self->rxpending); self->rdreq->callback = cdcecm_rdcomplete, ret = EP_SUBMIT(self->epbulkout, self->rdreq); if (ret != OK) { uerr("EP_SUBMIT failed. ret %d\n", ret); goto error; } /* We are successfully configured */ self->config = config; /* Set client's MAC address */ memcpy(self->dev.d_mac.ether.ether_addr_octet, "\x00\xe0\xde\xad\xbe\xef", IFHWADDRLEN); /* Report link up to networking layer */ if (self->dev.d_ifup(&self->dev) == OK) { self->dev.d_flags |= IFF_UP; } return OK; error: cdcecm_resetconfig(self); return ret; } /****************************************************************************** * Name: cdcecm_setinterface * ****************************************************************************/ static int cdcecm_setinterface(FAR struct cdcecm_driver_s *self, uint16_t interface, uint16_t altsetting) { uinfo("interface: %hu, altsetting: %hu\n", interface, altsetting); return OK; } /**************************************************************************** * Name: cdcecm_mkstrdesc * * Description: * Construct a string descriptor * ****************************************************************************/ static int cdcecm_mkstrdesc(uint8_t id, FAR struct usb_strdesc_s *strdesc) { const char *str; int len; int ndata; int i; switch (id) { #ifndef CONFIG_CDCECM_COMPOSITE case 0: { /* Descriptor 0 is the language id */ strdesc->len = 4; strdesc->type = USB_DESC_TYPE_STRING; strdesc->data[0] = LSBYTE(CDCECM_STR_LANGUAGE); strdesc->data[1] = MSBYTE(CDCECM_STR_LANGUAGE); return 4; } case CDCECM_MANUFACTURERSTRID: str = CONFIG_CDCECM_VENDORSTR; break; case CDCECM_PRODUCTSTRID: str = CONFIG_CDCECM_PRODUCTSTR; break; case CDCECM_SERIALSTRID: str = "0"; break; case CDCECM_CONFIGSTRID: str = "Default"; break; #endif case CDCECM_MACSTRID: str = "020000112233"; break; default: uwarn("Unknown string descriptor index: %d\n", id); return -EINVAL; } /* The string is utf16-le. The poor man's utf-8 to utf16-le * conversion below will only handle 7-bit en-us ascii */ len = strlen(str); if (len > (CDCECM_MAXSTRLEN / 2)) { len = (CDCECM_MAXSTRLEN / 2); } for (i = 0, ndata = 0; i < len; i++, ndata += 2) { strdesc->data[ndata] = str[i]; strdesc->data[ndata + 1] = 0; } strdesc->len = ndata + 2; strdesc->type = USB_DESC_TYPE_STRING; return strdesc->len; } /**************************************************************************** * Name: cdcecm_mkepdesc * * Description: * Construct the endpoint descriptor * ****************************************************************************/ static void cdcecm_mkepdesc(int epidx, FAR struct usb_epdesc_s *epdesc, FAR struct usbdev_devinfo_s *devinfo, bool hispeed) { uint16_t intin_mxpktsz = CONFIG_CDCECM_EPINTIN_FSSIZE; uint16_t bulkout_mxpktsz = CONFIG_CDCECM_EPBULKOUT_FSSIZE; uint16_t bulkin_mxpktsz = CONFIG_CDCECM_EPBULKIN_FSSIZE; #ifdef CONFIG_USBDEV_DUALSPEED if (hispeed) { intin_mxpktsz = CONFIG_CDCECM_EPINTIN_HSSIZE; bulkout_mxpktsz = CONFIG_CDCECM_EPBULKOUT_HSSIZE; bulkin_mxpktsz = CONFIG_CDCECM_EPBULKIN_HSSIZE; } #else UNUSED(hispeed); #endif epdesc->len = USB_SIZEOF_EPDESC; /* Descriptor length */ epdesc->type = USB_DESC_TYPE_ENDPOINT; /* Descriptor type */ switch (epidx) { case CDCECM_EP_INTIN_IDX: /* Interrupt IN endpoint */ { epdesc->addr = USB_DIR_IN | devinfo->epno[CDCECM_EP_INTIN_IDX]; epdesc->attr = USB_EP_ATTR_XFER_INT; epdesc->mxpacketsize[0] = LSBYTE(intin_mxpktsz); epdesc->mxpacketsize[1] = MSBYTE(intin_mxpktsz); epdesc->interval = 5; } break; case CDCECM_EP_BULKIN_IDX: { epdesc->addr = USB_DIR_IN | devinfo->epno[CDCECM_EP_BULKIN_IDX]; epdesc->attr = USB_EP_ATTR_XFER_BULK; epdesc->mxpacketsize[0] = LSBYTE(bulkin_mxpktsz); epdesc->mxpacketsize[1] = MSBYTE(bulkin_mxpktsz); epdesc->interval = 0; } break; case CDCECM_EP_BULKOUT_IDX: { epdesc->addr = USB_DIR_OUT | devinfo->epno[CDCECM_EP_BULKOUT_IDX]; epdesc->attr = USB_EP_ATTR_XFER_BULK; epdesc->mxpacketsize[0] = LSBYTE(bulkout_mxpktsz); epdesc->mxpacketsize[1] = MSBYTE(bulkout_mxpktsz); epdesc->interval = 0; } break; default: DEBUGASSERT(false); } } /**************************************************************************** * Name: cdcecm_mkcfgdesc * * Description: * Construct the config descriptor * ****************************************************************************/ static int16_t cdcecm_mkcfgdesc(FAR uint8_t *desc, FAR struct usbdev_devinfo_s *devinfo) { FAR struct usb_cfgdesc_s *cfgdesc = NULL; int16_t len = 0; #ifndef CONFIG_CDCECM_COMPOSITE if (desc) { cfgdesc = (FAR struct usb_cfgdesc_s *)desc; cfgdesc->len = USB_SIZEOF_CFGDESC; cfgdesc->type = USB_DESC_TYPE_CONFIG; cfgdesc->ninterfaces = CDCECM_NINTERFACES; cfgdesc->cfgvalue = CDCECM_CONFIGID; cfgdesc->icfg = devinfo->strbase + CDCECM_CONFIGSTRID; cfgdesc->attr = USB_CONFIG_ATTR_ONE | CDCECM_SELFPOWERED | CDCECM_REMOTEWAKEUP; cfgdesc->mxpower = (CONFIG_USBDEV_MAXPOWER + 1) / 2; desc += USB_SIZEOF_CFGDESC; } len += USB_SIZEOF_CFGDESC; #elif defined(CONFIG_COMPOSITE_IAD) /* Interface association descriptor */ if (desc) { FAR struct usb_iaddesc_s *iaddesc = (FAR struct usb_iaddesc_s *)desc; iaddesc->len = USB_SIZEOF_IADDESC; /* Descriptor length */ iaddesc->type = USB_DESC_TYPE_INTERFACEASSOCIATION; /* Descriptor type */ iaddesc->firstif = devinfo->ifnobase; /* Number of first interface of the function */ iaddesc->nifs = devinfo->ninterfaces; /* Number of interfaces associated with the function */ iaddesc->classid = USB_CLASS_CDC; /* Class code */ iaddesc->subclass = CDC_SUBCLASS_ECM; /* Sub-class code */ iaddesc->protocol = CDC_PROTO_NONE; /* Protocol code */ iaddesc->ifunction = 0; /* Index to string identifying the function */ desc += USB_SIZEOF_IADDESC; } len += USB_SIZEOF_IADDESC; #endif /* Communications Class Interface */ if (desc) { FAR struct usb_ifdesc_s *ifdesc = (FAR struct usb_ifdesc_s *)desc; ifdesc->len = USB_SIZEOF_IFDESC; ifdesc->type = USB_DESC_TYPE_INTERFACE; ifdesc->ifno = devinfo->ifnobase; ifdesc->alt = 0; ifdesc->neps = 1; ifdesc->classid = USB_CLASS_CDC; ifdesc->subclass = CDC_SUBCLASS_ECM; ifdesc->protocol = CDC_PROTO_NONE; ifdesc->iif = 0; desc += USB_SIZEOF_IFDESC; } len += USB_SIZEOF_IFDESC; if (desc) { FAR struct cdc_hdr_funcdesc_s *hdrdesc; hdrdesc = (FAR struct cdc_hdr_funcdesc_s *)desc; hdrdesc->size = SIZEOF_HDR_FUNCDESC; hdrdesc->type = USB_DESC_TYPE_CSINTERFACE; hdrdesc->subtype = CDC_DSUBTYPE_HDR; hdrdesc->cdc[0] = LSBYTE(0x0110); hdrdesc->cdc[1] = MSBYTE(0x0110); desc += SIZEOF_HDR_FUNCDESC; } len += SIZEOF_HDR_FUNCDESC; if (desc) { FAR struct cdc_union_funcdesc_s *uniondesc; uniondesc = (FAR struct cdc_union_funcdesc_s *)desc; uniondesc->size = SIZEOF_UNION_FUNCDESC(1); uniondesc->type = USB_DESC_TYPE_CSINTERFACE; uniondesc->subtype = CDC_DSUBTYPE_UNION; uniondesc->master = devinfo->ifnobase; uniondesc->slave[0] = devinfo->ifnobase + 1; desc += SIZEOF_UNION_FUNCDESC(1); } len += SIZEOF_UNION_FUNCDESC(1); if (desc) { FAR struct cdc_ecm_funcdesc_s *ecmdesc; ecmdesc = (FAR struct cdc_ecm_funcdesc_s *)desc; ecmdesc->size = SIZEOF_ECM_FUNCDESC; ecmdesc->type = USB_DESC_TYPE_CSINTERFACE; ecmdesc->subtype = CDC_DSUBTYPE_ECM; ecmdesc->mac = devinfo->strbase + CDCECM_MACSTRID; ecmdesc->stats[0] = 0; ecmdesc->stats[1] = 0; ecmdesc->stats[2] = 0; ecmdesc->stats[3] = 0; ecmdesc->maxseg[0] = LSBYTE(CONFIG_NET_ETH_PKTSIZE); ecmdesc->maxseg[1] = MSBYTE(CONFIG_NET_ETH_PKTSIZE); ecmdesc->nmcflts[0] = LSBYTE(0); ecmdesc->nmcflts[1] = MSBYTE(0); ecmdesc->npwrflts = 0; desc += SIZEOF_ECM_FUNCDESC; } len += SIZEOF_ECM_FUNCDESC; if (desc) { FAR struct usb_epdesc_s *epdesc = (FAR struct usb_epdesc_s *)desc; cdcecm_mkepdesc(CDCECM_EP_INTIN_IDX, epdesc, devinfo, false); desc += USB_SIZEOF_EPDESC; } len += USB_SIZEOF_EPDESC; /* Data Class Interface */ if (desc) { FAR struct usb_ifdesc_s *ifdesc = (FAR struct usb_ifdesc_s *)desc; ifdesc = (FAR struct usb_ifdesc_s *)desc; ifdesc->len = USB_SIZEOF_IFDESC; ifdesc->type = USB_DESC_TYPE_INTERFACE; ifdesc->ifno = devinfo->ifnobase + 1; ifdesc->alt = 0; ifdesc->neps = 0; ifdesc->classid = USB_CLASS_CDC_DATA; ifdesc->subclass = CDC_SUBCLASS_ECM; ifdesc->protocol = CDC_PROTO_NONE; ifdesc->iif = 0; desc += USB_SIZEOF_IFDESC; } len += USB_SIZEOF_IFDESC; if (desc) { FAR struct usb_ifdesc_s *ifdesc = (FAR struct usb_ifdesc_s *)desc; ifdesc = (FAR struct usb_ifdesc_s *)desc; ifdesc->len = USB_SIZEOF_IFDESC; ifdesc->type = USB_DESC_TYPE_INTERFACE; ifdesc->ifno = devinfo->ifnobase + 1; ifdesc->alt = 1; ifdesc->neps = 2; ifdesc->classid = USB_CLASS_CDC_DATA; ifdesc->subclass = CDC_SUBCLASS_ECM; ifdesc->protocol = CDC_PROTO_NONE; ifdesc->iif = 0; desc += USB_SIZEOF_IFDESC; } len += USB_SIZEOF_IFDESC; if (desc) { FAR struct usb_epdesc_s *epdesc = (FAR struct usb_epdesc_s *)desc; cdcecm_mkepdesc(CDCECM_EP_BULKIN_IDX, epdesc, devinfo, false); desc += USB_SIZEOF_EPDESC; } len += USB_SIZEOF_EPDESC; if (desc) { FAR struct usb_epdesc_s *epdesc = (FAR struct usb_epdesc_s *)desc; cdcecm_mkepdesc(CDCECM_EP_BULKOUT_IDX, epdesc, devinfo, false); desc += USB_SIZEOF_EPDESC; } len += USB_SIZEOF_EPDESC; if (cfgdesc) { cfgdesc->totallen[0] = LSBYTE(len); cfgdesc->totallen[1] = MSBYTE(len); } DEBUGASSERT(len <= CDCECM_MXDESCLEN); return len; } /******************************************************************************* * Name: cdcecm_getdescriptor * * Description: * Copy the USB CDC-ECM Device USB Descriptor of a given Type and a given * Index into the provided Descriptor Buffer. * * Input Parameter: * drvr - The USB Device Fuzzer Driver instance. * type - The Type of USB Descriptor requested. * index - The Index of the USB Descriptor requested. * desc - The USB Descriptor is copied into this buffer, which must be at * least CDCECM_MXDESCLEN bytes wide. * * Returned Value: * The size in bytes of the requested USB Descriptor or a negated errno in * case of failure. * ******************************************************************************/ static int cdcecm_getdescriptor(FAR struct cdcecm_driver_s *self, uint8_t type, uint8_t index, FAR void *desc) { uinfo("type: 0x%02hhx, index: 0x%02hhx\n", type, index); switch (type) { #ifndef CONFIG_CDCECM_COMPOSITE case USB_DESC_TYPE_DEVICE: { memcpy(desc, &g_devdesc, sizeof(g_devdesc)); return (int)sizeof(g_devdesc); } break; #endif case USB_DESC_TYPE_CONFIG: { return cdcecm_mkcfgdesc((FAR uint8_t *)desc, &self->devinfo); } break; case USB_DESC_TYPE_STRING: { return cdcecm_mkstrdesc(index, (FAR struct usb_strdesc_s *)desc); } break; default: uwarn("Unsupported descriptor type: 0x%02hhx\n", type); break; } return -ENOTSUP; } /**************************************************************************** * USB Device Class Methods ****************************************************************************/ /**************************************************************************** * Name: cdcecm_bind * * Description: * Invoked when the driver is bound to an USB device * ****************************************************************************/ static int cdcecm_bind(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev) { FAR struct cdcecm_driver_s *self = (FAR struct cdcecm_driver_s *)driver; int ret = OK; uinfo("\n"); dev->ep0->priv = self; /* Preallocate control request */ self->ctrlreq = cdcecm_allocreq(dev->ep0, CDCECM_MXDESCLEN); if (self->ctrlreq == NULL) { ret = -ENOMEM; goto error; } self->ctrlreq->callback = cdcecm_ep0incomplete; self->epint = DEV_ALLOCEP(dev, USB_DIR_IN | self->devinfo.epno[CDCECM_EP_INTIN_IDX], true, USB_EP_ATTR_XFER_INT); self->epbulkin = DEV_ALLOCEP(dev, USB_DIR_IN | self->devinfo.epno[CDCECM_EP_BULKIN_IDX], true, USB_EP_ATTR_XFER_BULK); self->epbulkout = DEV_ALLOCEP(dev, USB_DIR_OUT | self->devinfo.epno[CDCECM_EP_BULKOUT_IDX], false, USB_EP_ATTR_XFER_BULK); if (!self->epint || !self->epbulkin || !self->epbulkout) { uerr("Failed to allocate endpoints!\n"); ret = -ENODEV; goto error; } self->epint->priv = self; self->epbulkin->priv = self; self->epbulkout->priv = self; /* Pre-allocate read requests. The buffer size is one full packet. */ self->rdreq = cdcecm_allocreq(self->epbulkout, CONFIG_NET_ETH_PKTSIZE + CONFIG_NET_GUARDSIZE); if (self->rdreq == NULL) { uerr("Out of memory\n"); ret = -ENOMEM; goto error; } self->rdreq->callback = cdcecm_rdcomplete; /* Pre-allocate a single write request. Buffer size is one full packet. */ self->wrreq = cdcecm_allocreq(self->epbulkin, CONFIG_NET_ETH_PKTSIZE + CONFIG_NET_GUARDSIZE); if (self->wrreq == NULL) { uerr("Out of memory\n"); ret = -ENOMEM; goto error; } self->wrreq->callback = cdcecm_wrcomplete; /* The single write request just allocated is available now. */ ret = nxsem_init(&self->wrreq_idle, 0, 1); if (ret != OK) { uerr("nxsem_init failed. ret: %d\n", ret); goto error; } self->txdone = false; self->dev.d_len = 0; #ifndef CONFIG_CDCECM_COMPOSITE #ifdef CONFIG_USBDEV_SELFPOWERED DEV_SETSELFPOWERED(dev); #endif /* And pull-up the data line for the soft connect function (unless we are * part of a composite device) */ DEV_CONNECT(dev); #endif return OK; error: uerr("cdcecm_bind failed! ret: %d\n", ret); cdcecm_unbind(driver, dev); return ret; } static void cdcecm_unbind(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev) { FAR struct cdcecm_driver_s *self = (FAR struct cdcecm_driver_s *)driver; #ifdef CONFIG_DEBUG_FEATURES if (!driver || !dev) { usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0); return; } #endif /* Make sure that the endpoints have been unconfigured. If * we were terminated gracefully, then the configuration should * already have been reset. If not, then calling cdcacm_resetconfig * should cause the endpoints to immediately terminate all * transfers and return the requests to us (with result == -ESHUTDOWN) */ cdcecm_resetconfig(self); up_mdelay(50); /* Free the interrupt IN endpoint */ if (self->epint) { DEV_FREEEP(dev, self->epint); self->epint = NULL; } /* Free the pre-allocated control request */ if (self->ctrlreq != NULL) { cdcecm_freereq(dev->ep0, self->ctrlreq); self->ctrlreq = NULL; } /* Free pre-allocated read requests (which should all have * been returned to the free list at this time -- we don't check) */ if (self->rdreq != NULL) { cdcecm_freereq(self->epbulkout, self->rdreq); self->rdreq = NULL; } /* Free the bulk OUT endpoint */ if (self->epbulkout) { DEV_FREEEP(dev, self->epbulkout); self->epbulkout = NULL; } /* Free write requests that are not in use (which should be all * of them) */ if (self->wrreq != NULL) { cdcecm_freereq(self->epbulkin, self->wrreq); self->wrreq = NULL; } /* Free the bulk IN endpoint */ if (self->epbulkin) { DEV_FREEEP(dev, self->epbulkin); self->epbulkin = NULL; } /* Clear out all data in the buffer */ self->dev.d_len = 0; } static int cdcecm_setup(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev, FAR const struct usb_ctrlreq_s *ctrl, FAR uint8_t *dataout, size_t outlen) { FAR struct cdcecm_driver_s *self = (FAR struct cdcecm_driver_s *)driver; uint16_t value = GETUINT16(ctrl->value); uint16_t index = GETUINT16(ctrl->index); uint16_t len = GETUINT16(ctrl->len); int ret = -EOPNOTSUPP; uinfo("\n"); if ((ctrl->type & USB_REQ_TYPE_MASK) == USB_REQ_TYPE_STANDARD) { switch (ctrl->req) { case USB_REQ_GETDESCRIPTOR: { uint8_t descindex = ctrl->value[0]; uint8_t desctype = ctrl->value[1]; ret = cdcecm_getdescriptor(self, desctype, descindex, self->ctrlreq->buf); } break; case USB_REQ_SETCONFIGURATION: ret = cdcecm_setconfig(self, value); break; case USB_REQ_SETINTERFACE: ret = cdcecm_setinterface(self, index, value); break; default: uwarn("Unsupported standard req: 0x%02hhx\n", ctrl->req); break; } } else if ((ctrl->type & USB_REQ_TYPE_MASK) == USB_REQ_TYPE_CLASS) { switch (ctrl->req) { case ECM_SET_PACKET_FILTER: /* SetEthernetPacketFilter is the only required CDCECM subclass * specific request, but it is still ok to always operate in * promiscuous mode and rely on the host to do the filtering. This * is especially true for our case: A simulated point-to-point * connection. */ uinfo("ECM_SET_PACKET_FILTER. wValue: 0x%04hx, wIndex: 0x%04hx\n", GETUINT16(ctrl->value), GETUINT16(ctrl->index)); ret = OK; break; default: uwarn("Unsupported class req: 0x%02hhx\n", ctrl->req); break; } } else { uwarn("Unsupported type: 0x%02hhx\n", ctrl->type); } if (ret >= 0) { FAR struct usbdev_req_s *ctrlreq = self->ctrlreq; ctrlreq->len = MIN(len, ret); ctrlreq->flags = USBDEV_REQFLAGS_NULLPKT; ret = EP_SUBMIT(dev->ep0, ctrlreq); uinfo("EP_SUBMIT ret: %d\n", ret); if (ret < 0) { ctrlreq->result = OK; cdcecm_ep0incomplete(dev->ep0, ctrlreq); } } return ret; } static void cdcecm_disconnect(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev) { uinfo("\n"); } /**************************************************************************** * Name: cdcecm_classobject * * Description: * Register USB CDC/ECM and return the class object. * * Returned Value: * A pointer to the allocated class object (NULL on failure). * ****************************************************************************/ static int cdcecm_classobject(int minor, FAR struct usbdev_devinfo_s *devinfo, FAR struct usbdevclass_driver_s **classdev) { FAR struct cdcecm_driver_s *self; int ret; /* Initialize the driver structure */ self = kmm_zalloc(sizeof(struct cdcecm_driver_s)); if (!self) { nerr("Out of memory!\n"); return -ENOMEM; } /* Network device initialization */ self->dev.d_buf = self->pktbuf; self->dev.d_ifup = cdcecm_ifup; /* I/F up (new IP address) callback */ self->dev.d_ifdown = cdcecm_ifdown; /* I/F down callback */ self->dev.d_txavail = cdcecm_txavail; /* New TX data callback */ #ifdef CONFIG_NET_MCASTGROUP self->dev.d_addmac = cdcecm_addmac; /* Add multicast MAC address */ self->dev.d_rmmac = cdcecm_rmmac; /* Remove multicast MAC address */ #endif #ifdef CONFIG_NETDEV_IOCTL self->dev.d_ioctl = cdcecm_ioctl; /* Handle network IOCTL commands */ #endif self->dev.d_private = (FAR void *)self; /* Used to recover private state from dev */ /* Create a watchdog for timing polling for and timing of transmissions */ self->txpoll = wd_create(); /* Create periodic poll timer */ DEBUGASSERT(self->txpoll != NULL); /* USB device initialization */ #ifdef CONFIG_USBDEV_DUALSPEED self->usbdev.speed = USB_SPEED_HIGH; #else self->usbdev.speed = USB_SPEED_FULL; #endif self->usbdev.ops = &g_usbdevops; memcpy(&self->devinfo, devinfo, sizeof(struct usbdev_devinfo_s)); /* Put the interface in the down state. This usually amounts to resetting * the device and/or calling cdcecm_ifdown(). */ cdcecm_ifdown(&self->dev); /* Read the MAC address from the hardware into priv->dev.d_mac.ether.ether_addr_octet * Applies only if the Ethernet MAC has its own internal address. */ memcpy(self->dev.d_mac.ether.ether_addr_octet, "\x00\xe0\xde\xad\xbe\xef", IFHWADDRLEN); /* Register the device with the OS so that socket IOCTLs can be performed */ ret = netdev_register(&self->dev, NET_LL_ETHERNET); if (ret < 0) { nerr("netdev_register failed. ret: %d\n", ret); return ret; } self->registered = true; *classdev = (FAR struct usbdevclass_driver_s *)self; return ret; } /**************************************************************************** * Name: cdcecm_uninitialize * * Description: * Un-initialize the USB CDC/ECM class driver. This function is used * internally by the USB composite driver to uninitialize the CDC/ECM * driver. This same interface is available (with an untyped input * parameter) when the CDC/ECM driver is used standalone. * * Input Parameters: * There is one parameter, it differs in typing depending upon whether the * CDC/ECM driver is an internal part of a composite device, or a standalone * USB driver: * * classdev - The class object returned by cdcacm_classobject() * handle - The opaque handle representing the class object returned by * a previous call to cdcacm_initialize(). * * Returned Value: * None * ****************************************************************************/ #ifdef CONFIG_CDCECM_COMPOSITE void cdcecm_uninitialize(FAR struct usbdevclass_driver_s *classdev) #else void cdcecm_uninitialize(FAR void *handle) #endif { #ifdef CONFIG_CDCECM_COMPOSITE FAR struct cdcecm_driver_s *self = (FAR struct cdcecm_driver_s *)classdev; #else FAR struct cdcecm_driver_s *self = (FAR struct cdcecm_driver_s *)handle; #endif int ret; #ifdef CONFIG_CDCECM_COMPOSITE /* Check for pass 2 uninitialization. We did most of the work on the * first pass uninitialization. */ if (!self->registered) { /* In this second and final pass, all that remains to be done is to * free the memory resources. */ kmm_free(self); return; } #endif /* Un-register the CDC/ECM netdev device */ ret = netdev_unregister(&self->dev); if (ret < 0) { nerr("ERROR: netdev_unregister failed. ret: %d\n", ret); } /* For the case of the composite driver, there is a two pass * uninitialization sequence. We cannot yet free the driver structure. * We will do that on the second pass. We mark the fact that we have * already uninitialized by setting the registered flag to false. * If/when we are called again, then we will free the memory resources. */ self->registered = false; /* Successfully unregistered netdev */ /* Unregister the driver (unless we are a part of a composite device). The * device unregister logic will (1) return all of the requests to us then * (2) call the unbind method. * * The same thing will happen in the composite case except that: (1) the * composite driver will call usbdev_unregister() which will (2) return the * requests for all members of the composite, and (3) call the unbind * method in the composite device which will (4) call the unbind method * for this device. */ #ifndef CONFIG_CDCECM_COMPOSITE usbdev_unregister(&self->usbdev); /* And free the driver structure */ kmm_free(self); #endif } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: cdcecm_initialize * * Description: * Register CDC/ECM USB device interface. Register the corresponding network * driver to NuttX and bring up the network. * * Input Parameters: * minor - Device minor number. * handle - An optional opaque reference to the CDC/ECM class object that * may subsequently be used with cdcecm_uninitialize(). * * Returned Value: * Zero (OK) means that the driver was successfully registered. On any * failure, a negated errno value is returned. * ****************************************************************************/ #ifndef CONFIG_CDCECM_COMPOSITE int cdcecm_initialize(int minor, FAR void **handle) { FAR struct usbdevclass_driver_s *drvr = NULL; struct usbdev_devinfo_s devinfo; int ret; memset(&devinfo, 0, sizeof(struct usbdev_devinfo_s)); devinfo.ninterfaces = CDCECM_NINTERFACES; devinfo.nstrings = CDCECM_NSTRIDS; devinfo.nendpoints = CDCECM_NUM_EPS; devinfo.epno[CDCECM_EP_INTIN_IDX] = CONFIG_CDCECM_EPINTIN; devinfo.epno[CDCECM_EP_BULKIN_IDX] = CONFIG_CDCECM_EPBULKIN; devinfo.epno[CDCECM_EP_BULKOUT_IDX] = CONFIG_CDCECM_EPBULKOUT; ret = cdcecm_classobject(minor, &devinfo, &drvr); if (ret == OK) { ret = usbdev_register(drvr); if (ret < 0) { uinfo("usbdev_register failed. ret %d\n", ret); } } if (handle) { *handle = (FAR void *)drvr; } return ret; } #endif /**************************************************************************** * Name: cdcecm_get_composite_devdesc * * Description: * Helper function to fill in some constants into the composite * configuration struct. * * Input Parameters: * dev - Pointer to the configuration struct we should fill * * Returned Value: * None * ****************************************************************************/ #ifdef CONFIG_CDCECM_COMPOSITE void cdcecm_get_composite_devdesc(struct composite_devdesc_s *dev) { memset(dev, 0, sizeof(struct composite_devdesc_s)); /* The callback functions for the CDC/ECM class. * * classobject() and uninitialize() must be provided by board-specific * logic */ dev->mkconfdesc = cdcecm_mkcfgdesc; dev->mkstrdesc = cdcecm_mkstrdesc; dev->classobject = cdcecm_classobject; dev->uninitialize = cdcecm_uninitialize; dev->nconfigs = CDCECM_NCONFIGS; /* Number of configurations supported */ dev->configid = CDCECM_CONFIGID; /* The only supported configuration ID */ /* Let the construction function calculate the size of the config descriptor */ #ifdef CONFIG_USBDEV_DUALSPEED dev->cfgdescsize = cdcecm_mkcfgdesc(NULL, NULL, USB_SPEED_UNKNOWN, 0); #else dev->cfgdescsize = cdcecm_mkcfgdesc(NULL, NULL); #endif /* Board-specific logic must provide the device minor */ /* Interfaces. * * ifnobase must be provided by board-specific logic */ dev->devinfo.ninterfaces = CDCECM_NINTERFACES; /* Number of interfaces in the configuration */ /* Strings. * * strbase must be provided by board-specific logic */ dev->devinfo.nstrings = CDCECM_NSTRIDS + 1; /* Number of Strings */ /* Endpoints. * * Endpoint numbers must be provided by board-specific logic. */ dev->devinfo.nendpoints = CDCECM_NUM_EPS; } #endif /* CONFIG_CDCECM_COMPOSITE */ #endif /* CONFIG_NET_CDCECM */