/****************************************************************************
 * sched/init/os_bringup.c
 *
 *   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * With extensions by:
 *
 *   Author: Uros Platise <uros.platise@isotel.eu>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <sched.h>
#include <stdlib.h>
#include <string.h>
#include <debug.h>
#include <sys/mount.h>

#include <nuttx/arch.h>
#include <nuttx/board.h>
#include <nuttx/init.h>
#include <nuttx/symtab.h>
#include <nuttx/wqueue.h>
#include <nuttx/kthread.h>
#include <nuttx/userspace.h>
#include <nuttx/binfmt/binfmt.h>

#ifdef CONFIG_PAGING
# include "paging/paging.h"
#endif
# include "wqueue/wqueue.h"
# include "init/init.h"

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/* Configuration */

#if defined(CONFIG_INIT_NONE)
  /* Kconfig logic will set CONFIG_INIT_NONE if dependencies are not met */

#  error No initialization mechanism selected (CONFIG_INIT_NONE)

#else
#  if !defined(CONFIG_INIT_ENTRYPOINT) && !defined(CONFIG_INIT_FILEPATH)
  /* For backward compatibility with older defconfig files when this was
   * the way things were done.
   */

#    define CONFIG_INIT_ENTRYPOINT 1
#  endif

#  if defined(CONFIG_INIT_ENTRYPOINT)
  /* Initialize by starting a task at an entry point */

#    ifndef CONFIG_USER_ENTRYPOINT
  /* Entry point name must have been provided */

#      error CONFIG_USER_ENTRYPOINT must be defined
#    endif

#  elif defined(CONFIG_INIT_FILEPATH)
  /* Initialize by running an initialization program in the file system.
   * Presumably the user has configured a board initialization function
   * that will mount the file system containing the initialization
   * program.
   */

#    ifndef CONFIG_USER_INITPATH
  /* Path to the initialization program must have been provided */

#      error CONFIG_USER_INITPATH must be defined
#    endif

#    if !defined(CONFIG_INIT_SYMTAB) || !defined(CONFIG_INIT_NEXPORTS)
  /* No symbol information... assume no symbol table is available */

#      undef CONFIG_INIT_SYMTAB
#      undef CONFIG_INIT_NEXPORTS
#      define CONFIG_INIT_SYMTAB NULL
#      define CONFIG_INIT_NEXPORTS 0
#    else
extern const struct symtab_s CONFIG_INIT_SYMTAB[];
extern const int             CONFIG_INIT_NEXPORTS;
#    endif
#  endif
#endif

/* In the protected build (only) we also need to start the user work queue */

#if !defined(CONFIG_BUILD_PROTECTED)
#  undef CONFIG_LIB_USRWORK
#endif

#if !defined(CONFIG_USERMAIN_PRIORITY)
#  define CONFIG_USERMAIN_PRIORITY SCHED_PRIORITY_DEFAULT
#endif

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Name: os_pgworker
 *
 * Description:
 *   Start the page fill worker kernel thread that will resolve page faults.
 *   This should always be the first thread started because it may have to
 *   resolve page faults in other threads
 *
 * Input Parameters:
 *   None
 *
 * Returned Value:
 *   None
 *
 ****************************************************************************/

#ifdef CONFIG_PAGING
static inline void os_pgworker(void)
{
  /* Start the page fill worker kernel thread that will resolve page faults.
   * This should always be the first thread started because it may have to
   * resolve page faults in other threads
   */

  sinfo("Starting paging thread\n");

  g_pgworker = kthread_create("pgfill", CONFIG_PAGING_DEFPRIO,
                              CONFIG_PAGING_STACKSIZE,
                              (main_t)pg_worker, (FAR char * const *)NULL);
  DEBUGASSERT(g_pgworker > 0);
}

#else /* CONFIG_PAGING */
#  define os_pgworker()

#endif /* CONFIG_PAGING */

/****************************************************************************
 * Name: os_workqueues
 *
 * Description:
 *   Start the worker threads that service the work queues.
 *
 * Input Parameters:
 *   None
 *
 * Returned Value:
 *   None
 *
 ****************************************************************************/

#ifdef CONFIG_SCHED_WORKQUEUE
static inline void os_workqueues(void)
{
#ifdef CONFIG_LIB_USRWORK
  pid_t pid;
#endif

#ifdef CONFIG_SCHED_HPWORK
  /* Start the high-priority worker thread to support device driver lower
   * halves.
   */

  (void)work_hpstart();

#endif /* CONFIG_SCHED_HPWORK */

#ifdef CONFIG_SCHED_LPWORK
  /* Start the low-priority worker thread for other, non-critical continuation
   * tasks
   */

  (void)work_lpstart();

#endif /* CONFIG_SCHED_LPWORK */

#ifdef CONFIG_LIB_USRWORK
  /* Start the user-space work queue */

  DEBUGASSERT(USERSPACE->work_usrstart != NULL);
  pid = USERSPACE->work_usrstart();
  DEBUGASSERT(pid > 0);
  UNUSED(pid);
#endif
}

#else /* CONFIG_SCHED_WORKQUEUE */
#  define os_workqueues()

#endif /* CONFIG_SCHED_WORKQUEUE */

/****************************************************************************
 * Name: os_start_application
 *
 * Description:
 *   Execute the board initialization function (if so configured) and start
 *   the application initialization thread.
 *
 * Input Parameters:
 *   None
 *
 * Returned Value:
 *   None
 *
 ****************************************************************************/

#if defined(CONFIG_INIT_ENTRYPOINT)
static inline void os_do_appstart(void)
{
  int pid;

#ifdef CONFIG_BOARD_INITIALIZE
  /* Perform any last-minute, board-specific initialization, if so
   * configured.
   */

  board_initialize();
#endif

  /* Start the application initialization task.  In a flat build, this is
   * entrypoint is given by the definitions, CONFIG_USER_ENTRYPOINT.  In
   * the protected build, however, we must get the address of the
   * entrypoint from the header at the beginning of the user-space blob.
   */

  sinfo("Starting init thread\n");

#ifdef CONFIG_BUILD_PROTECTED
  DEBUGASSERT(USERSPACE->us_entrypoint != NULL);
  pid = nxtask_create("init", CONFIG_USERMAIN_PRIORITY,
                      CONFIG_USERMAIN_STACKSIZE, USERSPACE->us_entrypoint,
                      (FAR char * const *)NULL);
#else
  pid = nxtask_create("init", CONFIG_USERMAIN_PRIORITY,
                      CONFIG_USERMAIN_STACKSIZE,
                      (main_t)CONFIG_USER_ENTRYPOINT,
                      (FAR char * const *)NULL);
#endif
  DEBUGASSERT(pid > 0);
  UNUSED(pid);
}

#elif defined(CONFIG_INIT_FILEPATH)
static inline void os_do_appstart(void)
{
  int ret;

#ifdef CONFIG_BOARD_INITIALIZE
  /* Perform any last-minute, board-specific initialization, if so
   * configured.
   */

  board_initialize();
#endif

#ifdef CONFIG_INIT_MOUNT
  /* Mount the file system containing the init program. */

  ret = mount(CONFIG_INIT_MOUNT_SOURCE, CONFIG_INIT_MOUNT_TARGET,
              CONFIG_INIT_MOUNT_FSTYPE, CONFIG_INIT_MOUNT_FLAGS,
              CONFIG_INIT_MOUNT_DATA);
  DEBUGASSERT(ret >= 0);
  UNUSED(ret);
#endif

  /* Start the application initialization program from a program in a
   * mounted file system.  Presumably the file system was mounted as part
   * of the board_initialize() operation.
   */

  sinfo("Starting init task: %s\n", CONFIG_USER_INITPATH);

  ret = exec(CONFIG_USER_INITPATH, NULL, CONFIG_INIT_SYMTAB,
             CONFIG_INIT_NEXPORTS);
  DEBUGASSERT(ret >= 0);
  UNUSED(ret);
}

#elif defined(CONFIG_INIT_NONE)
#  define os_do_appstart()

#else
#  error "Cannot start initialization thread"

#endif

/****************************************************************************
 * Name: os_start_task
 *
 * Description:
 *   This is the framework for a short duration worker thread.  It off-loads
 *   the board initialization and application start-up from the limited
 *   start-up, initialization thread to a more robust kernel thread.
 *
 * Input Parameters:
 *   None
 *
 * Returned Value:
 *   None
 *
 ****************************************************************************/

#ifdef CONFIG_BOARD_INITTHREAD
static int os_start_task(int argc, FAR char **argv)
{
  /* Do the board/application initialization and exit */

  os_do_appstart();
  return OK;
}
#endif

/****************************************************************************
 * Name: os_start_application
 *
 * Description:
 *   Execute the board initialization function (if so configured) and start
 *   the application initialization thread.  This will be done either on the
 *   thread of execution of the caller or on a separate thread of execution
 *   if so configured.
 *
 * Input Parameters:
 *   None
 *
 * Returned Value:
 *   None
 *
 ****************************************************************************/

static inline void os_start_application(void)
{
#ifdef CONFIG_BOARD_INITTHREAD
  int pid;

  /* Do the board/application initialization on a separate thread of
   * execution.
   */

  pid = kthread_create("AppBringUp", CONFIG_BOARD_INITTHREAD_PRIORITY,
                      CONFIG_BOARD_INITTHREAD_STACKSIZE,
                      (main_t)os_start_task, (FAR char * const *)NULL);
  DEBUGASSERT(pid > 0);
  UNUSED(pid);
#else
  /* Do the board/application initialization on this thread of execution. */

  os_do_appstart();

#endif
}

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: os_bringup
 *
 * Description:
 *   Start all initial system tasks.  This does the "system bring-up" after
 *   the conclusion of basic OS initialization.  These initial system tasks
 *   may include:
 *
 *   - pg_worker:   The page-fault worker thread (only if CONFIG_PAGING is
 *                  defined.
 *   - work_thread: The work thread.  This general thread can be used to
 *                  perform most any kind of queued work.  Its primary
 *                  function is to serve as the "bottom half" of device
 *                  drivers.
 *
 *   And the main application entry point:
 *   symbols, either:
 *
 *   - CONFIG_USER_ENTRYPOINT: This is the default user application entry
 *                 point, or
 *   - CONFIG_USER_INITPATH: The full path to the location in a mounted
 *                 file system where we can expect to find the
 *                 initialization program.  Presumably, this file system
 *                 was mounted by board-specific logic when
 *                 board_initialize() was called.
 *
 * Input Parameters:
 *   None
 *
 * Returned Value:
 *   None
 *
 ****************************************************************************/

int os_bringup(void)
{
  /* Setup up the initial environment for the idle task.  At present, this
   * may consist of only the initial PATH variable.  The PATH variable is
   * (probably) not used by the IDLE task.  However, the environment
   * containing the PATH variable will be inherited by all of the threads
   * created by the IDLE task.
   */

#if !defined(CONFIG_DISABLE_ENVIRON) && defined(CONFIG_PATH_INITIAL)
  (void)setenv("PATH", CONFIG_PATH_INITIAL, 1);
#endif

#if !defined(CONFIG_DISABLE_ENVIRON) && defined(CONFIG_LDPATH_INITIAL)
  (void)setenv("LD_LIBRARY_PATH", CONFIG_LDPATH_INITIAL, 1);
#endif

  /* Start the page fill worker kernel thread that will resolve page faults.
   * This should always be the first thread started because it may have to
   * resolve page faults in other threads
   */

  os_pgworker();

  /* Start the worker thread that will serve as the device driver "bottom-
   * half" and will perform misc garbage clean-up.
   */

  os_workqueues();

  /* Once the operating system has been initialized, the system must be
   * started by spawning the user initialization thread of execution.  This
   * will be the first user-mode thread.
   */

  os_start_application();

  /* We an save a few bytes by discarding the IDLE thread's environment. */

#if !defined(CONFIG_DISABLE_ENVIRON) && (defined(CONFIG_PATH_INITIAL) || defined(CONFIG_LDPATH_INITIAL))
  (void)clearenv();
#endif

  return OK;
}