/**************************************************************************** * arch/z16f/irq.h * arch/chip/irq.h * * Copyright (C) 2008 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /* This file should never be included directed but, rather, * only indirectly through nuttx/irq.h (via arch/irq.h) */ #ifndef __ARCH_Z16F_IRQ_H #define __ARCH_Z16F_IRQ_H /**************************************************************************** * Included Files ****************************************************************************/ #ifndef __ASSEMBLY__ # include #endif /**************************************************************************** * Definitions ****************************************************************************/ /* Interrupt Vectors (excluding reset and sysexec which are handled differently) */ #define Z16F_IRQ_IRQ0 ( 0) /* First of 8 IRQs controlled by IRQ0 registers */ #define Z16F_IRQ_ADC ( 0) /* Vector: 0x2C IRQ0.0 ADC */ #define Z16F_IRQ_SPI ( 1) /* Vector: 0x28 IRQ0.1 SPI */ #define Z16F_IRQ_I2C ( 2) /* Vector: 0x24 IRQ0.2 I2C */ #define Z16F_IRQ_UART0TX ( 3) /* Vector: 0x20 IRQ0.3 UART0 TX */ #define Z16F_IRQ_UART0RX ( 4) /* Vector: 0x1C IRQ0.4 UART0 RX */ #define Z16F_IRQ_TIMER0 ( 5) /* Vector: 0x18 IRQ0.5 Timer 0 */ #define Z16F_IRQ_TIMER1 ( 6) /* Vector: 0x14 IRQ0.6 Timer 1 */ #define Z16F_IRQ_TIMER2 ( 7) /* Vector: 0x10 IRQ0.7 Timer 2 */ #define Z16F_IRQ_IRQ1 ( 8) /* First of 8 IRQs controlled by IRQ1 registers */ #define Z16F_IRQ_P0AD ( 8) /* Vector: 0x4C IRQ1.0 Port A/D0, rising/falling edge */ #define Z16F_IRQ_P1AD ( 9) /* Vector: 0x48 IRQ1.1 Port A/D1, rising/falling edge */ #define Z16F_IRQ_P2AD (10) /* Vector: 0x44 IRQ1.2 Port A/D2, rising/falling edge */ #define Z16F_IRQ_P3AD (11) /* Vector: 0x40 IRQ1.3 Port A/D3, rising/falling edge */ #define Z16F_IRQ_P4AD (12) /* Vector: 0x3C IRQ1.4 Port A/D4, rising/falling edge */ #define Z16F_IRQ_P5AD (13) /* Vector: 0x38 IRQ1.5 Port A/D5, rising/falling edge */ #define Z16F_IRQ_P6AD (14) /* Vector: 0x34 IRQ1.6 Port A/D6, rising/falling edge */ #define Z16F_IRQ_P7AD (15) /* Vector: 0x30 IRQ1.7 Port A/D7, rising/falling edge */ #define Z16F_IRQ_IRQ2 (16) /* First of 8 IRQs controlled by IRQ2 registers */ #define Z16F_IRQ_C0 (16) /* Vector: IRQ2.0 0x6C Port C0, both edges DMA0 */ #define Z16F_IRQ_C1 (17) /* Vector: IRQ2.1 0x68 Port C1, both edges DMA1 */ #define Z16F_IRQ_C2 (18) /* Vector: IRQ2.2 0x64 Port C2, both edges DMA2 */ #define Z16F_IRQ_C3 (19) /* Vector: IRQ2.3 0x60 Port C3, both edges DMA3 */ #define Z16F_IRQ_PWMFAULT (20) /* Vector: IRQ2.4 0x5C PWM Fault */ #define Z16F_IRQ_UART1TX (21) /* Vector: IRQ2.5 0x58 UART1 TX */ #define Z16F_IRQ_UART1RX (22) /* Vector: IRQ2.6 0x54 UART1 RX */ #define Z16F_IRQ_PWMTIMER (23) /* Vector: IRQ2.7 0x50 PWM Timer */ #define Z16F_IRQ_SYSTIMER Z16F_IRQ_TIMER0 #define NR_IRQS (24) /* These macros will map an IRQ to a register bit position */ #define Z16F_IRQ0_BIT(i) (1 << ((i)-Z16F_IRQ_IRQ0)) #define Z16F_IRQ1_BIT(i) (1 << ((i)-Z16F_IRQ_IRQ1)) #define Z16F_IRQ2_BIT(i) (1 << ((i)-Z16F_IRQ_IRQ2)) /* IRQ Stack Frame Format * * This stack frame is created on each interrupt. These registers are stored * in the TCB to many context switches. * * The following represent all of the "static" registers r8-r15. These * are registers that whose value must be retained across function calls. * These registers must be saved bothby interrupt handling context switch * switch logic and also by user-initiated context switches. * * Registers are saved in the order consistent with pushmho , * that is with r15 pushed first and r8 push last. Since the z16f has * a "push-down" stack, the registers will be "in order" in memory. */ #define REG_R8 ( 0) /* 32-bits: R8 */ #define REG_R9 ( 2) /* 32-bits: R9 */ #define REG_R10 ( 4) /* 32-bits: R10 */ #define REG_R11 ( 6) /* 32-bits: R11 */ #define REG_R12 ( 8) /* 32-bits: R12 */ #define REG_R13 (10) /* 32-bits: R13 */ /* The frame pointer and the SP at the point of task resumption must * always be saved. */ #define REG_R14 (12) /* 32-bits: R14 = fp */ #define REG_FP REG_R14 #define REG_R15 (14) /* 32-bits: R15 = sp */ #define REG_SP REG_R15 /* The following represent all of the "volatile" registers r0-r7. These * are registers that whose value need not be retained across function * calls. These registers must be saved by interrupt handling context * switch logic but not by user-initiated context switches. * * Registers are saved in the order consistent with pushmlo , * that is with r7 pushed first and r0 push last. Since the z16f has * a "push-down" stack, the registers will be "in order" in memory. */ #define REG_R0 (16) /* 32-bits: R0 */ #define REG_R1 (18) /* 32-bits: R1 */ #define REG_R2 (20) /* 32-bits: R2 */ #define REG_R3 (22) /* 32-bits: R3 */ #define REG_R4 (24) /* 32-bits: R4 */ #define REG_R5 (26) /* 32-bits: R5 */ #define REG_R6 (28) /* 32-bits: R6 */ #define REG_R7 (30) /* 32-bits: R7 */ /* The following two offsets represent the state of the stack on entry * into the interrupt handler: * * TOS[0] = PC[31:24] * TOS[1] = PC[23:16] * TOS[2] = PC[15:8] * TOS[3] = PC[7:0] * TOS[4] = 0 * TOS[5] = flags */ #define REG_PC (32) /* 32-bits: Return PC */ #define REG_FLAGS (34) /* 16-bits: Flags register (with 0x00 padding) */ #define XCPTCONTEXT_REGS (35) #define XCPTCONTEXT_SIZE (2 * XCPTCONTEXT_REGS) /**************************************************************************** * Public Types ****************************************************************************/ #ifndef __ASSEMBLY__ /* This is the type of the register save array */ typedef uint16_t chipreg_t; /* This struct defines the way the registers are stored. */ struct xcptcontext { /* Register save area */ uint16_t regs[XCPTCONTEXT_REGS]; /* The following function pointer is non-zero if there * are pending signals to be processed. */ #ifndef CONFIG_DISABLE_SIGNALS CODE void *sigdeliver; /* Actual type is sig_deliver_t */ /* The following retains that state during signal execution */ uint32_t saved_pc; /* Saved return address */ uint16_t saved_i; /* Saved interrupt state */ #endif }; #endif /* The ZDS-II provides built-in operations to test & disable and to restore * the interrupt state. * * irqstate_t irqsave(void); * void irqrestore(irqstate_t flags); */ #ifdef __ZILOG__ # define irqsave() TDI() # define irqrestore(f) RI(f) #endif /**************************************************************************** * Inline functions ****************************************************************************/ /**************************************************************************** * Public Variables ****************************************************************************/ /**************************************************************************** * Public Function Prototypes ****************************************************************************/ #ifndef __ASSEMBLY__ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif /* ZDS-II intrinsic functions (normally declared in zneo.h) */ EXTERN intrinsic void EI(void); EXTERN intrinsic void DI(void); EXTERN intrinsic void RI(unsigned short); EXTERN intrinsic SET_VECTOR(int,void (* func) (void)); EXTERN intrinsic unsigned short TDI(void); #ifndef __ZILOG__ EXTERN irqstate_t irqsave(void); EXTERN void irqrestore(irqstate_t flags); #endif #undef EXTERN #ifdef __cplusplus } #endif #endif #endif /* __ARCH_Z16F_IRQ_H */