/**************************************************************************** * drivers/i2c/i2c_bitbang.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /**************************************************************************** * Private Types ****************************************************************************/ struct i2c_bitbang_dev_s { struct i2c_master_s i2c; struct i2c_bitbang_lower_dev_s *lower; #ifndef CONFIG_I2C_BITBANG_NO_DELAY int32_t delay; #endif }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static int i2c_bitbang_transfer(FAR struct i2c_master_s *dev, FAR struct i2c_msg_s *msgs, int count); static int i2c_bitbang_set_scl(FAR struct i2c_bitbang_dev_s *dev, bool high, bool nodelay); static void i2c_bitbang_set_sda(FAR struct i2c_bitbang_dev_s *dev, bool high); static int i2c_bitbang_wait_ack(FAR struct i2c_bitbang_dev_s *dev); static void i2c_bitbang_send(FAR struct i2c_bitbang_dev_s *dev, uint8_t data); /**************************************************************************** * Private Data ****************************************************************************/ static const struct i2c_ops_s g_i2c_ops = { i2c_bitbang_transfer /* transfer */ #ifdef CONFIG_I2C_RESET , NULL /* reset */ #endif }; /**************************************************************************** * Inline Functions ****************************************************************************/ inline static bool i2c_bitbang_get_sda(FAR struct i2c_bitbang_dev_s *dev) { return dev->lower->ops->get_sda(dev->lower); } #ifdef CONFIG_I2C_BITBANG_CLOCK_STRETCHING inline static bool i2c_bitbang_get_scl(FAR struct i2c_bitbang_dev_s *dev) { return dev->lower->ops->get_scl(dev->lower); } #endif /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: i2c_bitbang_transfer ****************************************************************************/ static int i2c_bitbang_transfer(FAR struct i2c_master_s *dev, FAR struct i2c_msg_s *msgs, int count) { FAR struct i2c_bitbang_dev_s *priv = (FAR struct i2c_bitbang_dev_s *)dev; int ret = OK; int i; irqstate_t flags; /* Lock to enforce timings */ flags = spin_lock_irqsave(NULL); for (i = 0; i < count; i++) { uint8_t addr; FAR struct i2c_msg_s *msg = &msgs[i]; #ifndef CONFIG_I2C_BITBANG_NO_DELAY /* Compute delay from frequency */ priv->delay = (USEC_PER_SEC / (2 * msg->frequency)) - CONFIG_I2C_BITBANG_GPIO_OVERHEAD; if (priv->delay < 0) { priv->delay = 0; } #endif /* If this is the start of transfer or we're changing sending direction * from last transfer, send START */ if (i == 0 || (msgs[i - 1].flags & I2C_M_READ) != (msgs[i].flags & I2C_M_READ)) { /* Send start bit */ i2c_bitbang_set_scl(priv, true, false); i2c_bitbang_set_sda(priv, false); i2c_bitbang_set_scl(priv, false, false); /* Send the address */ addr = (msg->flags & I2C_M_READ ? I2C_READADDR8(msg->addr) : I2C_WRITEADDR8(msg->addr)); i2c_bitbang_send(priv, addr); /* Wait for ACK */ ret = i2c_bitbang_wait_ack(priv); if (ret < 0) { goto out; } } i2c_bitbang_set_scl(priv, false, false); if (msg->flags & I2C_M_READ) { int j; int k; for (j = 0; j < msg->length; j++) { uint8_t data = 0; i2c_bitbang_set_sda(priv, true); msg->buffer[j] = 0; for (k = 0; k < 8; k++) { i2c_bitbang_set_scl(priv, true, false); data |= (i2c_bitbang_get_sda(priv) & 1) << (7 - k); i2c_bitbang_set_scl(priv, false, false); } msg->buffer[j] = data; if (j < msg->length - 1) { /* Send ACK */ i2c_bitbang_set_sda(priv, false); i2c_bitbang_set_scl(priv, true, false); i2c_bitbang_set_scl(priv, false, false); } else { /* On the last byte send NAK */ i2c_bitbang_set_sda(priv, true); i2c_bitbang_set_scl(priv, true, false); i2c_bitbang_set_scl(priv, false, false); } } } else { int j; for (j = 0; j < msg->length; j++) { /* Send the data */ i2c_bitbang_send(priv, msg->buffer[j]); ret = i2c_bitbang_wait_ack(priv); if (ret < 0) { goto out; } i2c_bitbang_set_scl(priv, false, false); } } if (!(msg->flags & I2C_M_NOSTOP)) { /* Send stop */ i2c_bitbang_set_sda(priv, false); i2c_bitbang_set_scl(priv, true, true); i2c_bitbang_set_sda(priv, true); } } out: /* Ensure lines are released */ i2c_bitbang_set_scl(priv, true, false); i2c_bitbang_set_sda(priv, true); spin_unlock_irqrestore(NULL, flags); return ret; } /**************************************************************************** * Name: i2c_bitbang_wait_ack ****************************************************************************/ static int i2c_bitbang_wait_ack(FAR struct i2c_bitbang_dev_s *priv) { int ret = OK; int i; /* Wait for ACK */ i2c_bitbang_set_sda(priv, true); i2c_bitbang_set_scl(priv, true, true); for (i = 0; i2c_bitbang_get_sda(priv) && i < CONFIG_I2C_BITBANG_TIMEOUT; i++) { up_udelay(1); } if (i == CONFIG_I2C_BITBANG_TIMEOUT) { ret = -EIO; } #ifndef CONFIG_I2C_BITBANG_NO_DELAY else { int remaining = priv->delay - i; if (remaining > 0) { up_udelay(remaining); } } #endif return ret; } /**************************************************************************** * Name: i2c_bitbang_send ****************************************************************************/ static void i2c_bitbang_send(FAR struct i2c_bitbang_dev_s *priv, uint8_t data) { uint8_t bit = 0b10000000; while (bit) { i2c_bitbang_set_sda(priv, !!(data & bit)); i2c_bitbang_set_scl(priv, true, false); i2c_bitbang_set_scl(priv, false, false); bit >>= 1; } } /**************************************************************************** * Name: i2c_bitbang_set_sda ****************************************************************************/ static void i2c_bitbang_set_sda(FAR struct i2c_bitbang_dev_s *dev, bool high) { dev->lower->ops->set_sda(dev->lower, high); } /**************************************************************************** * Name: i2c_bitbang_set_scl ****************************************************************************/ static int i2c_bitbang_set_scl(FAR struct i2c_bitbang_dev_s *dev, bool high, bool nodelay) { dev->lower->ops->set_scl(dev->lower, high); #ifndef CONFIG_I2C_BITBANG_NO_DELAY if (!nodelay && dev->delay) { up_udelay(dev->delay); } #endif #ifdef CONFIG_I2C_BITBANG_CLOCK_STRETCHING /* Allow for clock stretching */ if (high) { int i; for (i = 0; !i2c_bitbang_get_scl(dev) && i < CONFIG_I2C_BITBANG_TIMEOUT; i++) { up_udelay(1); if (i == CONFIG_I2C_BITBANG_TIMEOUT) { return -ETIMEDOUT; } } } #endif return OK; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: i2c_bitbang_initialize * * Description: * Initialize a bitbang I2C device instance * * Input Parameters: * lower - Lower half of driver * * Returned Value: * Pointer to a the I2C instance * ****************************************************************************/ FAR struct i2c_master_s *i2c_bitbang_initialize( FAR struct i2c_bitbang_lower_dev_s *lower) { FAR struct i2c_bitbang_dev_s *dev; DEBUGASSERT(lower && lower->ops); dev = (FAR struct i2c_bitbang_dev_s *)kmm_zalloc(sizeof(*dev)); if (!dev) { return NULL; } dev->i2c.ops = &g_i2c_ops; dev->lower = lower; dev->lower->ops->initialize(dev->lower); return &dev->i2c; }