/*************************************************************************** * configs/rx65n/include/board.h * * Copyright (C) 2008-2019 Gregory Nutt. All rights reserved. * Author: Anjana * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ***************************************************************************/ #ifndef _CONFIGS_RX65N_BOARD_H #define _CONFIGS_RX65N_BOARD_H /*************************************************************************** * Included Files ***************************************************************************/ #ifndef __ASSEMBLY__ # include #endif /**************************************************************************** * Pre-processor Definitions ***************************************************************************/ /* Clocking ****************************************************************/ #define RX_CLK_1MHz (1000UL * 1000UL) #define RX_FCLK ( 60 * RX_CLK_1MHz) #define RX_ICLK (120 * RX_CLK_1MHz) #define RX_PCLKA (120 * RX_CLK_1MHz) #define RX_PCLKB ( 60 * RX_CLK_1MHz) #define RX_PCLKC ( 60 * RX_CLK_1MHz) #define RX_PCLKD ( 60 * RX_CLK_1MHz) #define RX_BCK (120 * RX_CLK_1MHz) #if defined(CONFIG_ARCH_BOARD_RX65N_RSK1MB) || defined(CONFIG_ARCH_BOARD_RX65N_RSK2MB) #define RX_RESONATOR ( 24 * RX_CLK_1MHz) #elif defined(CONFIG_ARCH_BOARD_RX65N_GRROSE) #define RX_RESONATOR ( 12 * RX_CLK_1MHz) #elif defined(CONFIG_ARCH_BOARD_RX65N) #define RX_RESONATOR ( 24 * RX_CLK_1MHz) #else #error "Please definition RX_RESONATOR in board.h" #endif /* LED definitions */ #if defined(CONFIG_ARCH_BOARD_RX65N_RSK1MB) #define LED0 (PORT0.PODR.BIT.B3) #define LED1 (PORT0.PODR.BIT.B5) #define LED_PORTINIT(X) { LED0 = LED1 = (X); \ PORT0.ODR0.BIT.B6 = PORT0.ODR1.BIT.B2 = 0; \ PORT0.DSCR.BIT.B3 = PORT0.DSCR.BIT.B5 = 1; \ PORT0.PMR.BIT.B3 = PORT0.PMR.BIT.B5 = 0; \ PORT0.PDR.BIT.B3 = PORT0.PDR.BIT.B5 = 1; \ } #elif defined(CONFIG_ARCH_BOARD_RX65N_RSK2MB) #define LED0 (PORT7.PODR.BIT.B3) #define LED1 (PORTG.PODR.BIT.B7) #define LED_PORTINIT(X) { LED0 = LED1 = (X); \ PORT7.ODR0.BIT.B6 = PORTG.ODR1.BIT.B6 = 0; \ PORT7.DSCR.BIT.B3 = PORTG.DSCR.BIT.B7 = 1; \ PORT7.DSCR2.BIT.B3 = PORTG.DSCR2.BIT.B7 = 0; \ PORT7.PMR.BIT.B3 = PORTG.PMR.BIT.B7 = 0; \ PORT7.PDR.BIT.B3 = PORTG.PDR.BIT.B7 = 1; \ } #elif defined(CONFIG_ARCH_BOARD_RX65N) #define LED0 (PORT0.PODR.BIT.B3) #define LED1 (PORT0.PODR.BIT.B5) #define LED_PORTINIT(X) { LED0 = LED1 = (X); \ PORT0.ODR0.BIT.B6 = PORT0.ODR1.BIT.B2 = 0; \ PORT0.DSCR.BIT.B3 = PORT0.DSCR.BIT.B5 = 1; \ PORT0.PMR.BIT.B3 = PORT0.PMR.BIT.B5 = 0; \ PORT0.PDR.BIT.B3 = PORT0.PDR.BIT.B5 = 1; \ } #elif defined(CONFIG_ARCH_BOARD_RX65N_GRROSE) #define LED0 (PORTA.PODR.BIT.BT0) #define LED1 (PORTA.PODR.BIT.B1) #define LED_PORTINIT(X) { LED0 = LED1 = (X); \ PORTA.ODR0.BIT.BT0 = PORTA.ODR0.BIT.B2 = 0; \ PORTA.DSCR.BIT.BT0 = PORTA.DSCR.BIT.B1 = 1; \ PORTA.DSCR2.BIT.BT0 = PORTA.DSCR2.BIT.B1 = 0; \ PORTA.PMR.BIT.BT0 = PORTA.PMR.BIT.B1 = 0; \ PORTA.PDR.BIT.BT0 = PORTA.PDR.BIT.B1 = 1; \ } #else #errror "LEDs are not defined." #endif #define LED_STARTED 1 /* ON OFF NC NC */ #define LED_HEAPALLOCATE 0 /* NC NC NC NC */ #define LED_IRQSENABLED 0 /* NC NC NC NC */ #define LED_STACKCREATED 2 /* ON ON NC NC */ #define LED_INIRQ 0 /* NC NC NC NC */ #define LED_SIGNAL 0 /* NC NC NC NC */ #define LED_ASSERTION 0 /* NC NC NC NC */ #define LED_PANIC 3 /* OFF ON NC NC (flashing 2Hz) */ /* Button definitions *******************************************************/ /**************************************************************************** * Public Data ****************************************************************************/ #ifndef __ASSEMBLY__ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif /**************************************************************************** * Public Functions ****************************************************************************/ #undef EXTERN #ifdef __cplusplus } #endif #endif #endif /* _CONFIGS_RX65N_BOARD_H */