/**************************************************************************** * drivers/usbmisc/fusb301.c * * FUSB301 USB-C controller driver * * Copyright (C) 2016-2017 Haltian Ltd. All rights reserved. * Authors: Harri Luhtala * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #ifdef CONFIG_DEBUG_FUSB301 # define fusb301_err(x, ...) _err(x, ##__VA_ARGS__) # define fusb301_info(x, ...) _info(x, ##__VA_ARGS__) #else # define fusb301_err(x, ...) uerr(x, ##__VA_ARGS__) # define fusb301_info(x, ...) uinfo(x, ##__VA_ARGS__) #endif /* Other macros */ #define FUSB301_I2C_RETRIES 10 /**************************************************************************** * Private Data Types ****************************************************************************/ struct fusb301_dev_s { FAR struct i2c_master_s *i2c; /* I2C interface */ uint8_t addr; /* I2C address */ volatile bool int_pending; /* Interrupt received but handled */ sem_t devsem; /* Manages exclusive access */ FAR struct fusb301_config_s *config; /* Platform specific configuration */ #ifndef CONFIG_DISABLE_POLL FAR struct pollfd *fds[CONFIG_FUSB301_NPOLLWAITERS]; #endif }; /**************************************************************************** * Private Function prototypes ****************************************************************************/ static int fusb301_open(FAR struct file *filep); static int fusb301_close(FAR struct file *filep); static ssize_t fusb301_read(FAR struct file *, FAR char *, size_t); static ssize_t fusb301_write(FAR struct file *filep, FAR const char *buffer, size_t buflen); static int fusb301_ioctl(FAR struct file *filep, int cmd, unsigned long arg); #ifndef CONFIG_DISABLE_POLL static int fusb301_poll(FAR struct file *filep, FAR struct pollfd *fds, bool setup); static void fusb301_notify(FAR struct fusb301_dev_s *priv); #endif /**************************************************************************** * Private Data ****************************************************************************/ static const struct file_operations g_fusb301ops = { fusb301_open, /* open */ fusb301_close, /* close */ fusb301_read, /* read */ fusb301_write, /* write */ NULL, /* seek */ fusb301_ioctl /* ioctl */ #ifndef CONFIG_DISABLE_POLL , fusb301_poll /* poll */ #endif #ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS , NULL /* unlink */ #endif }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: fusb301_getreg * * Description: * Read from an 8-bit FUSB301 register * * Input Parameters: * priv - pointer to FUSB301 Private Structure * reg - register to read * * Returned Value: * Returns positive register value in case of success, otherwise ERROR ****************************************************************************/ static int fusb301_getreg(FAR struct fusb301_dev_s *priv, uint8_t reg) { int ret = -EIO; int retries; uint8_t regval; struct i2c_msg_s msg[2]; DEBUGASSERT(priv); msg[0].addr = priv->addr; msg[0].flags = 0; msg[0].buffer = ® msg[0].length = 1; msg[1].addr = priv->addr; msg[1].flags = I2C_M_READ; msg[1].buffer = ®val; msg[1].length = 1; /* Perform the transfer */ for (retries = 0; retries < FUSB301_I2C_RETRIES; retries++) { ret = I2C_TRANSFER(priv->i2c, msg, 2); if (ret == OK) { fusb301_info("reg:%02X, value:%02X\n", reg, regval); return regval; } else { /* Some error. Try to reset I2C bus and keep trying. */ #ifdef CONFIG_I2C_RESET if (retries == FUSB301_I2C_RETRIES - 1) { break; } ret = up_i2creset(priv->i2c); if (ret < 0) { fusb301_err("ERROR: up_i2creset failed: %d\n", ret); return ret; } #endif } } fusb301_info("reg:%02X, error:%d\n", reg, ret); return ret; } /**************************************************************************** * Name: fusb301_putreg * * Description: * Write a value to an 8-bit FUSB301 register * * Input Parameters: * priv - pointer to FUSB301 Private Structure * regaddr - register to read * regval - value to be written * * Returned Value: * None ****************************************************************************/ static int fusb301_putreg(FAR struct fusb301_dev_s *priv, uint8_t regaddr, uint8_t regval) { int ret = -EIO; int retries; struct i2c_msg_s msg; uint8_t txbuffer[2]; /* Setup to the data to be transferred (register address and data). */ txbuffer[0] = regaddr; txbuffer[1] = regval; /* Setup 8-bit FUSB301 address write message */ msg.addr = priv->addr; msg.flags = 0; msg.buffer = txbuffer; msg.length = 2; /* Perform the transfer */ for (retries = 0; retries < FUSB301_I2C_RETRIES; retries++) { ret = I2C_TRANSFER(priv->i2c, &msg, 1); if (ret == OK) { fusb301_info("reg:%02X, value:%02X\n", regaddr, regval); return OK; } else { /* Some error. Try to reset I2C bus and keep trying. */ #ifdef CONFIG_I2C_RESET if (retries == FUSB301_I2C_RETRIES - 1) { break; } ret = up_i2creset(priv->i2c); if (ret < 0) { fusb301_err("ERROR: up_i2creset failed: %d\n", ret); return ret; } #endif } } fusb301_err("ERROR: failed reg:%02X, value:%02X, error:%d\n", regaddr, regval, ret); return ret; } /**************************************************************************** * Name: fusb301_read_device_id * * Description: * Read device version and revision IDs * ****************************************************************************/ static int fusb301_read_device_id(FAR struct fusb301_dev_s * priv, FAR uint8_t * arg) { int ret; ret = fusb301_getreg(priv, FUSB301_DEV_ID_REG); if (ret < 0) { fusb301_err("ERROR: Failed to read device ID\n"); return -EIO; } *arg = ret; return OK; } /**************************************************************************** * Name: fusb301_clear_interrupts * * Description: * Clear interrupts from FUSB301 chip * ****************************************************************************/ static int fusb301_clear_interrupts(FAR struct fusb301_dev_s *priv) { int ret = OK; ret = fusb301_getreg(priv, FUSB301_INTERRUPT_REG); if (ret < 0) { fusb301_err("ERROR: Failed to clear interrupts\n"); return -EIO; } return ret; } /**************************************************************************** * Name: fusb301_setup * * Description: * Setup FUSB301 chip * ****************************************************************************/ static int fusb301_setup(FAR struct fusb301_dev_s *priv, struct fusb301_setup_s *setup) { int ret = OK; fusb301_info("drp_tgl:%02X, host_curr:%02X, global_int:%X, mask:%02X\n", setup->drp_toggle_timing, setup->host_current, setup->global_int_mask, setup->int_mask); ret = fusb301_putreg(priv, FUSB301_CONTROL_REG, setup->drp_toggle_timing | setup->host_current | setup->global_int_mask); if (ret < 0) { fusb301_err("ERROR: Failed to write control register\n"); goto err_out; } ret = fusb301_putreg(priv, FUSB301_MASK_REG, setup->int_mask); if (ret < 0) { fusb301_err("ERROR: Failed to write mask register\n"); } err_out: return ret; } /**************************************************************************** * Name: fusb301_set_mode * * Description: * Configure supported device modes (sink, source, DRP, accessory) * ****************************************************************************/ static int fusb301_set_mode(FAR struct fusb301_dev_s *priv, enum fusb301_mode_e mode) { int ret = OK; if (mode > MODE_DRP_ACC) { return -EINVAL; } ret = fusb301_putreg(priv, FUSB301_MODE_REG, mode); if (ret < 0) { fusb301_err("ERROR: Failed to write mode register\n"); ret = -EIO; } return ret; } /**************************************************************************** * Name: fusb301_set_state * * Description: * Force device in specified state * ****************************************************************************/ static int fusb301_set_state(FAR struct fusb301_dev_s *priv, enum fusb301_manual_e state) { int ret = OK; if (state > MANUAL_UNATT_SNK) { return -EINVAL; } ret = fusb301_putreg(priv, FUSB301_MANUAL_REG, state); if (ret < 0) { fusb301_err("ERROR: Failed to write manual register\n"); ret = -EIO; } return ret; } /**************************************************************************** * Name: fusb301_read_status * * Description: * Clear read status register * ****************************************************************************/ static int fusb301_read_status(FAR struct fusb301_dev_s *priv, FAR uint8_t *arg) { int ret; ret = fusb301_getreg(priv, FUSB301_STATUS_REG); if (ret < 0) { fusb301_err("ERROR: Failed to read status\n"); return -EIO; } *arg = ret; return OK; } /**************************************************************************** * Name: fusb301_read_devtype * * Description: * Read type of attached device * ****************************************************************************/ static int fusb301_read_devtype(FAR struct fusb301_dev_s *priv, FAR uint8_t *arg) { int ret; ret = fusb301_getreg(priv, FUSB301_TYPE_REG); if (ret < 0) { fusb301_err("ERROR: Failed to read type\n"); return -EIO; } *arg = ret; return OK; } /**************************************************************************** * Name: fusb301_reset * * Description: * Reset FUSB301 HW and clear I2C registers * ****************************************************************************/ static int fusb301_reset(FAR struct fusb301_dev_s *priv) { int ret = OK; ret = fusb301_putreg(priv, FUSB301_RESET_REG, RESET_SW_RES); if (ret < 0) { fusb301_err("ERROR: Failed to write reset register\n"); ret = -EIO; } return ret; } /**************************************************************************** * Name: fusb301_open * * Description: * This function is called whenever the FUSB301 device is opened. * ****************************************************************************/ static int fusb301_open(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct fusb301_dev_s *priv = inode->i_private; int ret = OK; /* Probe device */ ret = fusb301_getreg(priv, FUSB301_DEV_ID_REG); if (ret < 0) { fusb301_err("ERROR: No response at given address 0x%02X\n", priv->addr); ret = -EFAULT; } else { fusb301_info("device id: 0x%02X\n", ret); (void)fusb301_clear_interrupts(priv); priv->config->irq_enable(priv->config, true); } /* Error exit */ return ret; } /**************************************************************************** * Name: fusb301_close * * Description: * This routine is called when the FUSB301 device is closed. * ****************************************************************************/ static int fusb301_close(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct fusb301_dev_s *priv = inode->i_private; priv->config->irq_enable(priv->config, false); return OK; } /**************************************************************************** * Name: fusb301_read * Description: * This routine is called when the FUSB301 device is read. ****************************************************************************/ static ssize_t fusb301_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { FAR struct inode *inode = filep->f_inode; FAR struct fusb301_dev_s *priv = inode->i_private; FAR struct fusb301_result_s *ptr; irqstate_t flags; int ret; if (buflen < sizeof(struct fusb301_result_s)) { return 0; } ptr = (struct fusb301_result_s *)buffer; ret = sem_wait(&priv->devsem); if (ret < 0) { return -EINTR; } flags = enter_critical_section(); priv->int_pending = false; leave_critical_section(flags); (void)fusb301_clear_interrupts(priv); ptr->status = fusb301_getreg(priv, FUSB301_STATUS_REG); ptr->dev_type = fusb301_getreg(priv, FUSB301_TYPE_REG); sem_post(&priv->devsem); return sizeof(struct fusb301_result_s); } /**************************************************************************** * Name: fusb301_write * Description: * This routine is called when the FUSB301 device is written to. ****************************************************************************/ static ssize_t fusb301_write(FAR struct file *filep, FAR const char *buffer, size_t buflen) { ssize_t length = 0; return length; } /**************************************************************************** * Name: fusb301_ioctl * Description: * This routine is called when ioctl function call is performed for * the FUSB301 device. ****************************************************************************/ static int fusb301_ioctl(FAR struct file *filep, int cmd, unsigned long arg) { FAR struct inode *inode = filep->f_inode; FAR struct fusb301_dev_s *priv = inode->i_private; int ret; ret = sem_wait(&priv->devsem); if (ret < 0) { return -EINTR; } fusb301_info("cmd: 0x%02X, arg:%lu\n", cmd, arg); switch (cmd) { case USBCIOC_READ_DEVID: { ret = fusb301_read_device_id(priv, (uint8_t *)arg); } break; case USBCIOC_SETUP: { ret = fusb301_setup(priv, (struct fusb301_setup_s *)arg); } break; case USBCIOC_SET_MODE: { ret = fusb301_set_mode(priv, (uint8_t)arg); } break; case USBCIOC_SET_STATE: { ret = fusb301_set_state(priv, (uint8_t)arg); } break; case USBCIOC_READ_STATUS: { ret = fusb301_read_status(priv, (uint8_t *)arg); } break; case USBCIOC_READ_DEVTYPE: { ret = fusb301_read_devtype(priv, (uint8_t *)arg); } break; case USBCIOC_RESET: { ret = fusb301_reset(priv); } break; default: { fusb301_err("ERROR: Unrecognized cmd: %d\n", cmd); ret = -ENOTTY; } break; } sem_post(&priv->devsem); return ret; } /**************************************************************************** * Name: fusb301_poll * Description: * This routine is called during FUSB301 device poll ****************************************************************************/ #ifndef CONFIG_DISABLE_POLL static int fusb301_poll(FAR struct file *filep, FAR struct pollfd *fds, bool setup) { FAR struct inode *inode; FAR struct fusb301_dev_s *priv; irqstate_t flags; int ret = OK; int i; DEBUGASSERT(filep && fds); inode = filep->f_inode; DEBUGASSERT(inode && inode->i_private); priv = (FAR struct fusb301_dev_s *)inode->i_private; ret = sem_wait(&priv->devsem); if (ret < 0) { return -EINTR; } if (setup) { /* Ignore waits that do not include POLLIN */ if ((fds->events & POLLIN) == 0) { ret = -EDEADLK; goto out; } /* This is a request to set up the poll. Find an available * slot for the poll structure reference. */ for (i = 0; i < CONFIG_FUSB301_NPOLLWAITERS; i++) { /* Find an available slot */ if (!priv->fds[i]) { /* Bind the poll structure and this slot */ priv->fds[i] = fds; fds->priv = &priv->fds[i]; break; } } if (i >= CONFIG_FUSB301_NPOLLWAITERS) { fds->priv = NULL; ret = -EBUSY; goto out; } flags = enter_critical_section(); if (priv->int_pending) { fusb301_notify(priv); } leave_critical_section(flags); } else if (fds->priv) { /* This is a request to tear down the poll. */ struct pollfd **slot = (struct pollfd **)fds->priv; DEBUGASSERT(slot != NULL); /* Remove all memory of the poll setup */ *slot = NULL; fds->priv = NULL; } out: sem_post(&priv->devsem); return ret; } /**************************************************************************** * Name: fusb301_notify * * Description: * Notify thread about data to be available * ****************************************************************************/ static void fusb301_notify(FAR struct fusb301_dev_s *priv) { DEBUGASSERT(priv != NULL); int i; /* If there are threads waiting on poll() for FUSB301 data to become available, * then wake them up now. NOTE: we wake up all waiting threads because we * do not know that they are going to do. If they all try to read the data, * then some make end up blocking after all. */ for (i = 0; i < CONFIG_FUSB301_NPOLLWAITERS; i++) { struct pollfd *fds = priv->fds[i]; if (fds) { fds->revents |= POLLIN; fusb301_info("Report events: %02x\n", fds->revents); sem_post(fds->sem); } } } #endif /* !CONFIG_DISABLE_POLL */ /**************************************************************************** * Name: fusb301_callback * * Description: * FUSB301 interrupt handler * ****************************************************************************/ static int fusb301_int_handler(int irq, FAR void *context, FAR void *arg) { FAR struct fusb301_dev_s *priv = (FAR struct fusb301_dev_s *)arg; irqstate_t flags; DEBUGASSERT(priv != NULL); flags = enter_critical_section(); priv->int_pending = true; #ifndef CONFIG_DISABLE_POLL fusb301_notify(priv); #endif leave_critical_section(flags); return OK; } /**************************************************************************** * Public Functions ****************************************************************************/ int fusb301_register(FAR const char *devpath, FAR struct i2c_master_s *i2c, uint8_t addr, FAR struct fusb301_config_s *config) { FAR struct fusb301_dev_s *priv; int ret; DEBUGASSERT(devpath != NULL && i2c != NULL && config != NULL); /* Initialize the FUSB301 device structure */ priv = (FAR struct fusb301_dev_s *)kmm_zalloc(sizeof(struct fusb301_dev_s)); if (!priv) { fusb301_err("ERROR: Failed to allocate instance\n"); return -ENOMEM; } /* Initialize device structure semaphore */ sem_init(&priv->devsem, 0, 1); priv->int_pending = false; priv->i2c = i2c; priv->addr = addr; priv->config = config; /* Register the character driver */ ret = register_driver(devpath, &g_fusb301ops, 0666, priv); if (ret < 0) { fusb301_err("ERROR: Failed to register driver: %d\n", ret); goto errout_with_priv; } /* Prepare interrupt line and handler. */ priv->config->irq_clear(config); priv->config->irq_attach(config, fusb301_int_handler, priv); priv->config->irq_enable(config, false); return OK; errout_with_priv: sem_destroy(&priv->devsem); kmm_free(priv); return ret; }