/************************************************************************************** * drivers/lcd/ra8875.c * * Driver for the RAiO Technologies RA8875 LCD controller * * Copyright (C) 2015 Intuitive Aerial AB. All rights reserved. * Author: Marten Svanfeldt * * References: RA8875, Rev 1.6, Apr 2013, RAiO Technologies Inc * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * **************************************************************************************/ /************************************************************************************** * Included Files **************************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include "ra8875.h" #ifdef CONFIG_LCD_RA8875 /************************************************************************************** * Pre-processor Definitions **************************************************************************************/ /* Configuration **********************************************************************/ /* Check contrast selection */ #if !defined(CONFIG_LCD_MAXCONTRAST) # define CONFIG_LCD_MAXCONTRAST 1 #endif /* Check power setting */ #if !defined(CONFIG_LCD_MAXPOWER) || CONFIG_LCD_MAXPOWER < 1 # define CONFIG_LCD_MAXPOWER 1 #endif #if CONFIG_LCD_MAXPOWER > 255 # error "CONFIG_LCD_MAXPOWER must be less than 256 to fit in uint8_t" #endif /* Check orientation */ #if defined(CONFIG_LCD_PORTRAIT) # if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) || \ defined(CONFIG_LCD_RPORTRAIT) # error "Cannot define both portrait and any other orientations" # endif #elif defined(CONFIG_LCD_RPORTRAIT) # if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) # error "Cannot define both rportrait and any other orientations" # endif #elif defined(CONFIG_LCD_LANDSCAPE) # ifdef CONFIG_LCD_RLANDSCAPE # error "Cannot define both landscape and any other orientations" # endif #elif !defined(CONFIG_LCD_RLANDSCAPE) # define CONFIG_LCD_LANDSCAPE 1 #endif /* Display/Color Properties ***********************************************************/ /* Display Resolution */ #if defined(CONFIG_RA8875_XRES) # define RA8875_XRES CONFIG_RA8875_XRES #else # if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) # define RA8875_XRES 800 # else # define RA8875_XRES 480 # endif #endif #if defined(CONFIG_RA8875_YRES) # define RA8875_YRES CONFIG_RA8875_YRES #else # if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) # define RA8875_YRES 480 # else # define RA8875_YRES 800 # endif #endif #if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) # define RA8875_HW_XRES RA8875_XRES # define RA8875_HW_YRES RA8875_YRES #else # define RA8875_HW_XRES RA8875_YRES # define RA8875_HW_YRES RA8875_XRES #endif /* Color depth and format */ #if defined(CONFIG_LCD_RA8875_65K) # define RA8875_BPP 16 # define RA8875_COLORFMT FB_FMT_RGB16_565 # define RA8875_UNPACK_RED(p) (((p)>>11) & 0x1f) # define RA8875_UNPACK_GREEN(p) (((p)>>5) & 0x3f) # define RA8875_UNPACK_BLUE(p) ((p) & 0x1f) # define RA8875_PACK_RGB(r,g,b) ((r) << 11 | (g) << 5 | (b)) #else /* LCD_RA8875_256 */ # define RA8875_BPP 8 # define RA8875_COLORFMT FB_FMT_RGB8_332 # define RA8875_UNPACK_RED(p) (((p)>>5) & 0x7) # define RA8875_UNPACK_GREEN(p) (((p)>>2) & 0x7) # define RA8875_UNPACK_BLUE(p) ((p) & 0x3) # define RA8875_PACK_RGB(r,g,b) (((r)&0x7) << 5 | ((g)&0x7) << 2 | ((b)&0x3)) #endif #if RA8875_HW_XRES >= 800 && RA8875_HW_YRES >= 480 && RA8875_BPP > 8 # undef RA8875_2LAYER_POSSIBLE #else # define RA8875_2LAYER_POSSIBLE 1 #endif /************************************************************************************** * Private Type Definition **************************************************************************************/ /* This structure describes the state of this driver */ struct ra8875_dev_s { /* Publicly visible device structure */ struct lcd_dev_s dev; /* Private LCD-specific information follows */ FAR struct ra8875_lcd_s *lcd; /* The contained platform-specific, LCD interface */ uint8_t power; /* Current power setting */ #if defined(RA8875_2LAYER_POSSIBLE) uint8_t current_layer; /* Current drawing layer, 0=disabled */ #endif /* Shadow these registers to speed up rendering */ uint8_t shadow_mwcr0; uint16_t shadow_w_curh, shadow_w_curv; /* These fields simplify and reduce debug output */ #ifdef CONFIG_DEBUG_LCD bool put; /* Last raster operation was a putrun */ fb_coord_t firstrow; /* First row of the run */ fb_coord_t lastrow; /* Last row of the run */ fb_coord_t col; /* Column of the run */ size_t npixels; /* Length of the run */ #endif /* This is working memory allocated by the LCD driver for each LCD device * and for each color plane. This memory will hold one raster line of data. * The size of the allocated run buffer must therefore be at least * (bpp * xres / 8). Actual alignment of the buffer must conform to the * bitwidth of the underlying pixel type. * * If there are multiple planes, they may share the same working buffer * because different planes will not be operate on concurrently. However, * if there are multiple LCD devices, they must each have unique run buffers. */ uint16_t runbuffer[RA8875_XRES]; }; /************************************************************************************** * Private Function Prototypes **************************************************************************************/ /* Low Level LCD access */ static inline void ra8875_putreg(FAR struct ra8875_lcd_s *lcd, uint8_t regaddr, uint8_t regval); static inline void ra8875_putreg16(FAR struct ra8875_lcd_s *lcd, uint8_t regaddr, uint16_t regval); #ifndef CONFIG_LCD_NOGETRUN static inline uint8_t ra8875_readreg(FAR struct ra8875_lcd_s *lcd, uint8_t regaddr); static inline void ra8875_waitreg(FAR struct ra8875_lcd_s *lcd, uint8_t regaddr, uint8_t mask); #endif static void ra8875_set_writecursor(FAR struct ra8875_dev_s *dev, uint16_t column, uint16_t row); static void ra8875_set_readcursor(FAR struct ra8875_lcd_s *lcd, uint16_t column, uint16_t row); static void ra8875_set_mwcr0(FAR struct ra8875_dev_s *dev, uint8_t value); static void ra8875_setwindow(FAR struct ra8875_lcd_s *lcd, uint16_t x, uint16_t y, uint16_t width, uint16_t height); static inline void ra8875_setbackground(FAR struct ra8875_lcd_s *lcd, uint16_t color); static inline void ra8875_setforeground(FAR struct ra8875_lcd_s *lcd, uint16_t color); static void ra8875_clearmem(FAR struct ra8875_lcd_s *lcd); /* LCD Data Transfer Methods */ #if 0 /* Sometimes useful */ static void ra8875_dumprun(FAR const char *msg, FAR uint16_t *run, size_t npixels); #else # define ra8875_dumprun(m,r,n) #endif #ifdef CONFIG_DEBUG_LCD static void ra8875_showrun(FAR struct ra8875_dev_s *priv, fb_coord_t row, fb_coord_t col, size_t npixels, bool put); #else # define ra8875_showrun(p,r,c,n,b) #endif static int ra8875_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer, size_t npixels); static int ra8875_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer, size_t npixels); /* LCD Configuration */ static int ra8875_getvideoinfo(FAR struct lcd_dev_s *dev, FAR struct fb_videoinfo_s *vinfo); static int ra8875_getplaneinfo(FAR struct lcd_dev_s *dev, unsigned int planeno, FAR struct lcd_planeinfo_s *pinfo); /* LCD RGB Mapping */ #ifdef CONFIG_FB_CMAP # error "RGB color mapping not supported by this driver" #endif /* Cursor Controls */ #ifdef CONFIG_FB_HWCURSOR # error "Cursor control not supported by this driver" #endif /* LCD Specific Controls */ static int ra8875_getpower(FAR struct lcd_dev_s *dev); static int ra8875_setpower(FAR struct lcd_dev_s *dev, int power); static int ra8875_getcontrast(FAR struct lcd_dev_s *dev); static int ra8875_setcontrast(FAR struct lcd_dev_s *dev, unsigned int contrast); /* Initialization */ static inline int ra8875_hwinitialize(FAR struct ra8875_dev_s *priv); /************************************************************************************** * Private Data **************************************************************************************/ /* This driver can support only a signal RA8875 device. This is due to an * unfortunate decision made when the getrun and putrun methods were designed. The * following is the single RA8875 driver state instance: */ static struct ra8875_dev_s g_lcddev; /************************************************************************************** * Private Functions **************************************************************************************/ /************************************************************************************** * Name: ra8875_putreg(lcd, * * Description: * Write to an LCD register * **************************************************************************************/ static void ra8875_putreg(FAR struct ra8875_lcd_s *lcd, uint8_t regaddr, uint8_t regval) { /* Set the index register to the register address and write the register contents */ lcdinfo("putreg 0x%02x = 0x%02x\n", regaddr, regval); lcd->write_reg(lcd, regaddr, regval); } /************************************************************************************** * Name: ra8875_putreg16(lcd, * * Description: * Write to an LCD register * **************************************************************************************/ static void ra8875_putreg16(FAR struct ra8875_lcd_s *lcd, uint8_t regaddr, uint16_t regval) { /* Set the index register to the register address and write the register contents */ lcdinfo("putreg 0x%02x = 0x%04x\n", regaddr, regval); lcd->write_reg16(lcd, regaddr, regval); } /************************************************************************************** * Name: ra8875_readreg * * Description: * Read from an LCD register * **************************************************************************************/ #ifndef CONFIG_LCD_NOGETRUN static uint8_t ra8875_readreg(FAR struct ra8875_lcd_s *lcd, uint8_t regaddr) { uint8_t regval; /* Set the index register to the register address and read the register contents */ regval = lcd->read_reg(lcd, regaddr); lcdinfo("readreg 0x%02x = 0x%02x\n", regaddr, regval); return regval; } #endif /************************************************************************************** * Name: ra8875_waitreg * * Description: * Wait while an LCD register match set mask * **************************************************************************************/ #ifndef CONFIG_LCD_NOGETRUN static void ra8875_waitreg(FAR struct ra8875_lcd_s *lcd, uint8_t regaddr, uint8_t mask) { int i = 20000/100; while (i-- && ra8875_readreg(lcd, regaddr) & mask) { up_udelay(100); } } #endif /************************************************************************************** * Name: ra8875_set_writecursor * * Description: * Set the position to use for the write cursor * **************************************************************************************/ static void ra8875_set_writecursor(FAR struct ra8875_dev_s *dev, uint16_t column, uint16_t row) { FAR struct ra8875_lcd_s *lcd = dev->lcd; #if defined(CONFIG_LCD_PORTRAIT) || defined(CONFIG_LCD_RPORTRAIT) if (dev->shadow_w_curh != row) { ra8875_putreg16(lcd, RA8875_CURH0, row); dev->shadow_w_curh = row; } if (dev->shadow_w_curv != column) { ra8875_putreg16(lcd, RA8875_CURV0, column); dev->shadow_w_curv = column; } #elif defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) if (dev->shadow_w_curh != column) { ra8875_putreg16(lcd, RA8875_CURH0, column); dev->shadow_w_curh = column; } if (dev->shadow_w_curv != row) { ra8875_putreg16(lcd, RA8875_CURV0, row); dev->shadow_w_curv = row; } #endif } /************************************************************************************** * Name: ra8875_set_readcursor * * Description: * Set the position to use for the read cursor * **************************************************************************************/ static void ra8875_set_readcursor(FAR struct ra8875_lcd_s *lcd, uint16_t column, uint16_t row) { #if defined(CONFIG_LCD_PORTRAIT) || defined(CONFIG_LCD_RPORTRAIT) ra8875_putreg16(lcd, RA8875_RCURH0, row); ra8875_putreg16(lcd, RA8875_RCURV0, column); #elif defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) ra8875_putreg16(lcd, RA8875_RCURH0, column); ra8875_putreg16(lcd, RA8875_RCURV0, row); #endif } static void ra8875_set_mwcr0(FAR struct ra8875_dev_s *dev, uint8_t value) { FAR struct ra8875_lcd_s *lcd = dev->lcd; if (dev->shadow_mwcr0 != value) { ra8875_putreg(lcd, RA8875_MWCR0, value); dev->shadow_mwcr0 = value; } } /************************************************************************************** * Name: ra8875_setwindow * * Description: * Set hardware clipping window * **************************************************************************************/ static void ra8875_setwindow(FAR struct ra8875_lcd_s *lcd, uint16_t x, uint16_t y, uint16_t width, uint16_t height) { #if defined(CONFIG_LCD_PORTRAIT) || defined(CONFIG_LCD_RPORTRAIT) ra8875_putreg16(lcd, RA8875_HSAW0, y); ra8875_putreg16(lcd, RA8875_VSAW0, x); ra8875_putreg16(lcd, RA8875_HEAW0, (y+height-1)); ra8875_putreg16(lcd, RA8875_VEAW0, (x+width-1)); #elif defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) ra8875_putreg16(lcd, RA8875_HSAW0, x); ra8875_putreg16(lcd, RA8875_VSAW0, y); ra8875_putreg16(lcd, RA8875_HEAW0, (x+width-1)); ra8875_putreg16(lcd, RA8875_VEAW0, (y+height-1)); #endif } /************************************************************************************** * Name: ra8875_setbackground * * Description: * Set the background color to use for the BTE engine * **************************************************************************************/ static inline void ra8875_setbackground(FAR struct ra8875_lcd_s *lcd, uint16_t color) { ra8875_putreg(lcd, RA8875_BGCR0, RA8875_UNPACK_RED(color)); ra8875_putreg(lcd, RA8875_BGCR1, RA8875_UNPACK_GREEN(color)); ra8875_putreg(lcd, RA8875_BGCR2, RA8875_UNPACK_BLUE(color)); } /************************************************************************************** * Name: ra8875_setforeground * * Description: * Set the foreground color to use for the BTE engine * **************************************************************************************/ static inline void ra8875_setforeground(FAR struct ra8875_lcd_s *lcd, uint16_t color) { ra8875_putreg(lcd, RA8875_FGCR0, RA8875_UNPACK_RED(color)); ra8875_putreg(lcd, RA8875_FGCR1, RA8875_UNPACK_GREEN(color)); ra8875_putreg(lcd, RA8875_FGCR2, RA8875_UNPACK_BLUE(color)); } /************************************************************************************** * Name: ra8875_clearmem * * Description: * * **************************************************************************************/ static void ra8875_clearmem(FAR struct ra8875_lcd_s *lcd) { lcdinfo("clearmem start\n"); ra8875_putreg(lcd, RA8875_MCLR, RA8875_MCLR_CLEAR | RA8875_MCLR_FULL); /* Wait for operation to finish */ ra8875_waitreg(lcd, RA8875_MCLR, RA8875_MCLR_CLEAR); lcdinfo("clearmem done\n"); } /************************************************************************************** * Name: ra8875_showrun * * Description: * When LCD debug is enabled, try to reduce then amount of ouptut data generated by * ra8875_putrun and ra8875_getrun * **************************************************************************************/ #ifdef CONFIG_DEBUG_LCD static void ra8875_showrun(FAR struct ra8875_dev_s *priv, fb_coord_t row, fb_coord_t col, size_t npixels, bool put) { fb_coord_t nextrow = priv->lastrow + 1; /* Has anything changed (other than the row is the next row in the sequence)? */ if (put == priv->put && row == nextrow && col == priv->col && npixels == priv->npixels) { /* No, just update the last row */ priv->lastrow = nextrow; } else { /* Yes... then this is the end of the preceding sequence. Output the last run * (if there were more than one run in the sequence). */ if (priv->firstrow != priv->lastrow) { lcdinfo("...\n"); lcdinfo("%s row: %d col: %d npixels: %d\n", priv->put ? "PUT" : "GET", priv->lastrow, priv->col, priv->npixels); } /* And we are starting a new sequence. Output the first run of the * new sequence */ lcdinfo("%s row: %d col: %d npixels: %d\n", put ? "PUT" : "GET", row, col, npixels); /* And save information about the run so that we can detect continuations * of the sequence. */ priv->put = put; priv->firstrow = row; priv->lastrow = row; priv->col = col; priv->npixels = npixels; } } #endif /************************************************************************************** * Name: ra8875_putrun * * Description: * This method can be used to write a partial raster line to the LCD: * * row - Starting row to write to (range: 0 <= row < yres) * col - Starting column to write to (range: 0 <= col <= xres-npixels) * buffer - The buffer containing the run to be written to the LCD * npixels - The number of pixels to write to the LCD * (range: 0 < npixels <= xres-col) * **************************************************************************************/ static int ra8875_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer, size_t npixels) { FAR struct ra8875_dev_s *priv = &g_lcddev; FAR struct ra8875_lcd_s *lcd = priv->lcd; int16_t curhinc = 0; int16_t curvinc = 0; #if RA8875_BPP == 16 DEBUGASSERT(buffer && ((uintptr_t)buffer & 1) == 0); FAR const uint16_t *src = (FAR const uint16_t *)buffer; #else FAR const uint8_t *src = (FAR const uint8_t *)buffer; #endif int i; /* Buffer must be provided and aligned to a 16-bit address boundary */ ra8875_showrun(priv, row, col, npixels, true); #ifdef CONFIG_LCD_LANDSCAPE /* Set the cursor position */ ra8875_set_mwcr0(priv, RA8875_MWCR0_MODE_GRAPHICS | RA8875_MWCR0_MEMDIR_LEFTRIGHT | RA8875_MWCR0_WINC_ENABLE); ra8875_set_writecursor(priv, col, row); curhinc = npixels; curvinc = 0; #elif defined(CONFIG_LCD_RLANDSCAPE) /* Retransform coordinates, write right to left */ col = (RA8875_XRES-1) - col; row = (RA8875_YRES-1) - row; /* Set the cursor position */ ra8875_set_mwcr0(priv, RA8875_MWCR0_MODE_GRAPHICS | RA8875_MWCR0_MEMDIR_RIGHTLEFT | RA8875_MWCR0_WINC_ENABLE); ra8875_set_writecursor(priv, col, row); curhinc = -npixels; curvinc = 0; #elif defined(CONFIG_LCD_PORTRAIT) row = (RA8875_YRES-1) - row; /* Set the cursor position */ ra8875_set_mwcr0(priv, RA8875_MWCR0_MODE_GRAPHICS | RA8875_MWCR0_MEMDIR_TOPDOWN | RA8875_MWCR0_WINC_ENABLE); ra8875_set_writecursor(priv, col, row); curhinc = 0; curvinc = npixels; #else /* CONFIG_LCD_RPORTRAIT */ col = (RA8875_XRES-1) - col; /* Set the cursor position */ ra8875_set_mwcr0(priv, RA8875_MWCR0_MODE_GRAPHICS | RA8875_MWCR0_MEMDIR_DOWNTOP | RA8875_MWCR0_WINC_ENABLE); ra8875_set_writecursor(priv, col, row); curhinc = 0; curvinc = -npixels; #endif /* Write data, handle order automatically */ lcd->pwrite_prepare(lcd, RA8875_MRWC); for (i = 0; i < npixels; i++) { /* Write the next pixel to this position */ #if RA8875_BPP == 8 lcd->pwrite_data8(lcd, *src++); #else lcd->pwrite_data16(lcd, *src++); #endif } lcd->pwrite_finish(lcd); /* Update shadowed cursor */ priv->shadow_w_curh += curhinc; priv->shadow_w_curv += curvinc; return OK; } /************************************************************************************** * Name: ra8875_getrun * * Description: * This method can be used to read a partial raster line from the LCD: * * row - Starting row to read from (range: 0 <= row < yres) * col - Starting column to read read (range: 0 <= col <= xres-npixels) * buffer - The buffer in which to return the run read from the LCD * npixels - The number of pixels to read from the LCD * (range: 0 < npixels <= xres-col) * **************************************************************************************/ static int ra8875_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer, size_t npixels) { #ifndef CONFIG_LCD_NOGETRUN FAR struct ra8875_dev_s *priv = &g_lcddev; FAR struct ra8875_lcd_s *lcd = priv->lcd; FAR uint16_t *dest = (FAR uint16_t *)buffer; int i; /* Buffer must be provided and aligned to a 16-bit address boundary */ ra8875_showrun(priv, row, col, npixels, false); DEBUGASSERT(buffer && ((uintptr_t)buffer & 1) == 0); #ifdef CONFIG_LCD_LANDSCAPE /* Set the cursor position */ ra8875_putreg(lcd, RA8875_MWCR0, RA8875_MWCR0_MODE_GRAPHICS | RA8875_MWCR0_MEMDIR_LEFTRIGHT | RA8875_MWCR0_RINC_ENABLE); ra8875_putreg(lcd, RA8875_MRDC, RA8875_MRCD_MEMDIR_LEFTRIGHT); ra8875_set_readcursor(lcd, col, row); #elif defined(CONFIG_LCD_RLANDSCAPE) /* Retransform coordinates, write right to left */ col = (RA8875_XRES-1) - col; row = (RA8875_YRES-1) - row; /* Set the cursor position */ ra8875_putreg(lcd, RA8875_MWCR0, RA8875_MWCR0_MODE_GRAPHICS | RA8875_MWCR0_MEMDIR_RIGHTLEFT | RA8875_MWCR0_RINC_ENABLE); ra8875_putreg(lcd, RA8875_MRDC, RA8875_MRCD_MEMDIR_RIGHTLEFT); ra8875_set_readcursor(lcd, col, row); #elif defined(CONFIG_LCD_PORTRAIT) /* Retransform coordinates, write right to left */ row = (RA8875_YRES-1) - row; /* Set the cursor position */ ra8875_putreg(lcd, RA8875_MWCR0, RA8875_MWCR0_MODE_GRAPHICS | RA8875_MWCR0_MEMDIR_TPDOWN | RA8875_MWCR0_RINC_ENABLE); ra8875_putreg(lcd, RA8875_MRDC, RA8875_MRCD_MEMDIR_TOPDOWN); ra8875_set_readcursor(lcd, col, row); #else /* CONFIG_LCD_RPORTRAIT */ /* Retransform coordinates, write right to left */ col = (RA8875_XRES-1) - col; /* Set the cursor position */ ra8875_putreg(lcd, RA8875_MWCR0, RA8875_MWCR0_MODE_GRAPHICS | RA8875_MWCR0_MEMDIR_DOWNTOP | RA8875_MWCR0_RINC_ENABLE); ra8875_putreg(lcd, RA8875_MRDC, RA8875_MRCD_MEMDIR_DOWNTOP); ra8875_set_readcursor(lcd, col, row); #endif /* Read data, handle order automatically */ lcd->pread_prepare(lcd, RA8875_MRWC); for (i = 0; i < npixels; i++) { /* Read the next pixel from this position */ *dest++ = lcd->pread_data16(lcd); } lcd->pread_finish(lcd); return OK; #else return -ENOSYS; #endif } /************************************************************************************** * Name: ra8875_getvideoinfo * * Description: * Get information about the LCD video controller configuration. * **************************************************************************************/ static int ra8875_getvideoinfo(FAR struct lcd_dev_s *dev, FAR struct fb_videoinfo_s *vinfo) { DEBUGASSERT(dev && vinfo); lcdinfo("fmt: %d xres: %d yres: %d nplanes: 1\n", RA8875_COLORFMT, RA8875_XRES, RA8875_YRES); vinfo->fmt = RA8875_COLORFMT; /* Color format: RGB16-565: RRRR RGGG GGGB BBBB */ vinfo->xres = RA8875_XRES; /* Horizontal resolution in pixel columns */ vinfo->yres = RA8875_YRES; /* Vertical resolution in pixel rows */ vinfo->nplanes = 1; /* Number of color planes supported */ return OK; } /************************************************************************************** * Name: ra8875_getplaneinfo * * Description: * Get information about the configuration of each LCD color plane. * **************************************************************************************/ static int ra8875_getplaneinfo(FAR struct lcd_dev_s *dev, unsigned int planeno, FAR struct lcd_planeinfo_s *pinfo) { FAR struct ra8875_dev_s *priv = (FAR struct ra8875_dev_s *)dev; DEBUGASSERT(dev && pinfo && planeno == 0); lcdinfo("planeno: %d bpp: %d\n", planeno, RA8875_BPP); pinfo->putrun = ra8875_putrun; /* Put a run into LCD memory */ pinfo->getrun = ra8875_getrun; /* Get a run from LCD memory */ pinfo->buffer = (FAR uint8_t *)priv->runbuffer; /* Run scratch buffer */ pinfo->bpp = RA8875_BPP; /* Bits-per-pixel */ return OK; } /************************************************************************************** * Name: ra8875_getpower * * Description: * Get the LCD panel power status (0: full off - CONFIG_LCD_MAXPOWER: full on). On * backlit LCDs, this setting may correspond to the backlight setting. * **************************************************************************************/ static int ra8875_getpower(FAR struct lcd_dev_s *dev) { lcdinfo("power: %d\n", 0); return g_lcddev.power; } /************************************************************************************** * Name: ra8875_poweroff * * Description: * Enable/disable LCD panel power (0: full off - CONFIG_LCD_MAXPOWER: full on). On * backlit LCDs, this setting may correspond to the backlight setting. * **************************************************************************************/ static int ra8875_poweroff(FAR struct ra8875_lcd_s *lcd) { /* Set the backlight off */ ra8875_putreg(lcd, RA8875_P1CR, RA8875_P1CR_PWM_DISABLE); ra8875_putreg(lcd, RA8875_P1DCR, 0); /* Turn the display off */ ra8875_putreg(lcd, RA8875_PWRR, RA8875_PWRR_DISPLAY_OFF); /* Remember the power off state */ g_lcddev.power = 0; return OK; } /************************************************************************************** * Name: ra8875_setpower * * Description: * Enable/disable LCD panel power (0: full off - CONFIG_LCD_MAXPOWER: full on). On * backlit LCDs, this setting may correspond to the backlight setting. * **************************************************************************************/ static int ra8875_setpower(FAR struct lcd_dev_s *dev, int power) { FAR struct ra8875_dev_s *priv = (FAR struct ra8875_dev_s *)dev; FAR struct ra8875_lcd_s *lcd = priv->lcd; lcdinfo("power: %d\n", power); DEBUGASSERT((unsigned)power <= CONFIG_LCD_MAXPOWER); /* Set new power level */ if (power > 0) { if (g_lcddev.power == 0) { /* Set the backlight level */ ra8875_putreg(lcd, RA8875_P1CR, RA8875_P1CR_PWM_ENABLE); ra8875_putreg(lcd, RA8875_P1CR, RA8875_P1CR_PWM_ENABLE | RA8875_P1CR_CSDIV(1)); } ra8875_putreg(lcd, RA8875_P1DCR, power); /* Turn on display */ ra8875_putreg(lcd, RA8875_PWRR, RA8875_PWRR_DISPLAY_ON); g_lcddev.power = power; } else { /* Turn the display off */ ra8875_poweroff(lcd); } return OK; } /************************************************************************************** * Name: ra8875_getcontrast * * Description: * Get the current contrast setting (0-CONFIG_LCD_MAXCONTRAST). * **************************************************************************************/ static int ra8875_getcontrast(FAR struct lcd_dev_s *dev) { lcdinfo("Not implemented\n"); return -ENOSYS; } /************************************************************************************** * Name: ra8875_setcontrast * * Description: * Set LCD panel contrast (0-CONFIG_LCD_MAXCONTRAST). * **************************************************************************************/ static int ra8875_setcontrast(FAR struct lcd_dev_s *dev, unsigned int contrast) { lcdinfo("contrast: %d\n", contrast); return -ENOSYS; } /************************************************************************************** * Name: ra8875_hwinitialize * * Description: * Initialize the LCD hardware. * **************************************************************************************/ static inline int ra8875_hwinitialize(FAR struct ra8875_dev_s *priv) { uint8_t rv; FAR struct ra8875_lcd_s *lcd = priv->lcd; /* REVISIT: Maybe some of these values needs to be configurable?? */ lcdinfo("hwinitialize\n"); /* Reset */ ra8875_putreg(lcd, RA8875_PWRR, RA8875_PWRR_SWRESET); up_mdelay(100); ra8875_putreg(lcd, RA8875_PWRR, 0); /* Setup the PLL config */ ra8875_putreg(lcd, RA8875_PLLC1, RA8875_PLLC1_PLLDIVN(11)); up_mdelay(10); ra8875_putreg(lcd, RA8875_PLLC2, RA8875_PLLC2_PLLDIVK(2)); up_mdelay(10); /* Interface and color depth */ #if RA8875_BPP == 16 rv = RA8875_SYSR_COLOR_65K; #else rv = RA8875_SYSR_COLOR_256; #endif #if defined(CONFIG_LCD_RA8875_8BIT) rv |= RA8875_SYSR_MCUIF_8BIT; #elif defined(CONFIG_LCD_RA8875_16BIT) rv |= RA8875_SYSR_MCUIF_16BIT; #endif ra8875_putreg(lcd, RA8875_SYSR, rv); /* Pixel clock, invert + 4*SYS */ ra8875_putreg(lcd, RA8875_PCSR, RA8875_PCSR_PCLK_INV | RA8875_PCSR_PERIOD_4SYS); up_mdelay(1); /* Horizontal Settings */ ra8875_putreg(lcd, RA8875_HDWR, RA8875_HDWR_WIDTH(RA8875_HW_XRES)); ra8875_putreg(lcd, RA8875_HNDFTR, 0x02); ra8875_putreg(lcd, RA8875_HNDR, 0x03); ra8875_putreg(lcd, RA8875_HSTR, 0x01); ra8875_putreg(lcd, RA8875_HPWR, 0x03); /* Vertical Settings */ ra8875_putreg(lcd, RA8875_VDHR0, RA8875_VDHR0_HEIGHT(RA8875_HW_YRES)); ra8875_putreg(lcd, RA8875_VDHR1, RA8875_VDHR1_HEIGHT(RA8875_HW_YRES)); ra8875_putreg(lcd, RA8875_VNDR0, 0x0f); ra8875_putreg(lcd, RA8875_VNDR1, 0x00); ra8875_putreg(lcd, RA8875_VSTR0, 0x0e); ra8875_putreg(lcd, RA8875_VSTR1, 0x06); ra8875_putreg(lcd, RA8875_VPWR, 0x01); #if !defined(RA8875_2LAYER_POSSIBLE) /* Too high, only one layer possible */ ra8875_putreg(lcd, RA8875_DPCR, RA8875_DPCR_LAYERS_ONE); #else /* Two layers */ ra8875_putreg(lcd, RA8875_DPCR, RA8875_DPCR_LAYERS_TWO); #endif /* Setup window to be full screen */ ra8875_setwindow(lcd, 0, 0, RA8875_XRES, RA8875_YRES); /* Set background and foreground colors to black and white (respectively) */ ra8875_setbackground(lcd, 0x0000); ra8875_setforeground(lcd, 0xffff); /* Clear the memory */ ra8875_clearmem(lcd); ra8875_setpower(&priv->dev, 0x0); /* Initialize the shadow registers */ priv->shadow_mwcr0 = 0; priv->shadow_w_curh = 0; priv->shadow_w_curv = 0; lcdinfo("hwinitialize done\n"); return OK; } /************************************************************************************** * Public Functions **************************************************************************************/ /************************************************************************************** * Name: ra8875_lcdinitialize * * Description: * Initialize the LCD video hardware. The initial state of the LCD is fully * initialized, display memory cleared, and the LCD ready to use, but with the power * setting at 0 (full off). * **************************************************************************************/ FAR struct lcd_dev_s *ra8875_lcdinitialize(FAR struct ra8875_lcd_s *lcd) { int ret; lcdinfo("Initializing\n"); /* If we could support multiple RA8875 devices, this is where we would allocate * a new driver data structure... but we can't. Why not? Because of a bad should * the form of the getrun() and putrun methods. */ FAR struct ra8875_dev_s *priv = &g_lcddev; /* Initialize the driver data structure */ priv->dev.getvideoinfo = ra8875_getvideoinfo; priv->dev.getplaneinfo = ra8875_getplaneinfo; priv->dev.getpower = ra8875_getpower; priv->dev.setpower = ra8875_setpower; priv->dev.getcontrast = ra8875_getcontrast; priv->dev.setcontrast = ra8875_setcontrast; priv->lcd = lcd; /* Configure and enable LCD */ ret = ra8875_hwinitialize(priv); if (ret == OK) { /* Clear the display (setting it to the color 0=black) */ ra8875_clear(&priv->dev, 0); /* Turn the display off */ ra8875_poweroff(lcd); lcdinfo("Initialized\n"); return &g_lcddev.dev; } return NULL; } /************************************************************************************** * Name: ra8875_clear * * Description: * This is a non-standard LCD interface just for the RA8875. Because * of the various rotations, clearing the display in the normal way by writing a * sequences of runs that covers the entire display can be very slow. Here the * display is cleared by simply setting all video memory to the specified color. * * NOTE: This function is not available to applications in the protected or kernel * build modes. * **************************************************************************************/ void ra8875_clear(FAR struct lcd_dev_s *dev, uint16_t color) { #if 0 FAR struct ra8875_dev_s *priv = (FAR struct ra8875_dev_s *)dev; FAR struct ra8875_lcd_s *lcd = priv->lcd; /* Set the color to use for filling */ ra8875_setforeground(lcd, color); /* Draw a rectangle over entire screen */ ra8875_putreg16(lcd, RA8875_DLHSR0, 0); ra8875_putreg16(lcd, RA8875_DLVSR0, 0); ra8875_putreg16(lcd, RA8875_DLHER0, RA8875_XRES); ra8875_putreg16(lcd, RA8875_DLVER0, RA8875_YRES); ra8875_putreg(lcd, RA8875_DCR, RA8875_DCR_FILL | RA8875_DCR_SQUARE); ra8875_putreg(lcd, RA8875_DCR, RA8875_DCR_FILL | RA8875_DCR_SQUARE | RA8875_DCR_LINE_START); ra8875_waitreg(lcd, RA8875_DCR, RA8875_DCR_LINE_START); #endif /* Draw a rectangle over entire screen */ ra8875_drawrectangle(dev, 0, 0, RA8875_XRES, RA8875_YRES, color, true); } /************************************************************************************** * Name: ra8875_drawrectangle * * This is a non-standard function to draw a rectangle on the LCD. This function is * also used internally as part of the ra8875_clear implementation * * NOTE: This non-standard function is not available to applications in the * protected or kernel build modes. * **************************************************************************************/ void ra8875_drawrectangle(FAR struct lcd_dev_s *dev, uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint16_t color, bool fill) { FAR struct ra8875_dev_s *priv = (FAR struct ra8875_dev_s *)dev; FAR struct ra8875_lcd_s *lcd = priv->lcd; uint8_t draw_cmd = RA8875_DCR_SQUARE; uint16_t sx, sy, ex, ey; /* Set the color to use for filling */ ra8875_setforeground(lcd, color); /* Handle degenerate cases */ if (width == 1) { ra8875_drawline(dev, x, y, x, y+height, color); } else if (height == 1) { ra8875_drawline(dev, x, y, x+width, y, color); } if (fill) { draw_cmd |= RA8875_DCR_FILL; } /* Setup coordinates */ #ifdef CONFIG_LCD_LANDSCAPE sx = x; sy = y; ex = x + width - 1; ey = y + height - 1; #elif defined(CONFIG_LCD_RLANDSCAPE) sx = (RA8875_XRES - 1) - x - width + 1; sy = (RA8875_YRES - 1) - y - height + 1; ex = (RA8875_XRES - 1) - x; ey = (RA8875_YRES - 1) - y; #elif defined(CONFIG_LCD_PORTRAIT) sx = (RA8875_YRES - 1) - y - height + 1; sy = x; ex = (RA8875_YRES - 1) - y; ey = x + width - 1; #else /* CONFIG_LCD_RPORTRAIT */ sx = y; sy = (RA8875_XRES - 1) - x - width + 1; ex = y + height - 1; ey = (RA8875_XRES - 1) - x; #endif ra8875_putreg16(lcd, RA8875_DLHSR0, sx); ra8875_putreg16(lcd, RA8875_DLVSR0, sy); ra8875_putreg16(lcd, RA8875_DLHER0, ex); ra8875_putreg16(lcd, RA8875_DLVER0, ey); /* Run drawing */ ra8875_putreg(lcd, RA8875_DCR, draw_cmd); ra8875_putreg(lcd, RA8875_DCR, draw_cmd | RA8875_DCR_LINE_START); ra8875_waitreg(lcd, RA8875_DCR, RA8875_DCR_LINE_START); } /************************************************************************************** * Name: ra8875_drawline * * Description: * This is a non-standard function to draw a line on the LCD. This function is * also used internally as part of the ra8875_rectandle implementation. * * NOTE: This non-standard function is not available to applications in the * protected or kernel build modes. * **************************************************************************************/ void ra8875_drawline(FAR struct lcd_dev_s *dev, uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t color) { FAR struct ra8875_dev_s *priv = (FAR struct ra8875_dev_s *)dev; FAR struct ra8875_lcd_s *lcd = priv->lcd; uint8_t draw_cmd = RA8875_DCR_LINE; uint16_t sx, sy, ex, ey; /* Set the color to use for filling */ ra8875_setforeground(lcd, color); /* Handle degenerate cases */ /* Setup coordinates */ #if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) sx = x1; sy = y1; ex = x2; ey = y2; #else /* CONFIG_LCD_PORTRAIT or CONFIG_LCD_RPORTRAIT */ sx = y1; sy = x1; ex = y2; ey = x2; #endif ra8875_putreg16(lcd, RA8875_DLHSR0, sx); ra8875_putreg16(lcd, RA8875_DLVSR0, sy); ra8875_putreg16(lcd, RA8875_DLHER0, ex); ra8875_putreg16(lcd, RA8875_DLVER0, ey); /* Run drawing */ ra8875_putreg(lcd, RA8875_DCR, draw_cmd); ra8875_putreg(lcd, RA8875_DCR, draw_cmd | RA8875_DCR_LINE_START); ra8875_waitreg(lcd, RA8875_DCR, RA8875_DCR_LINE_START); } /************************************************************************************** * Name: ra8875_drawtriangle * * Description: * This is a non-standard function to draw a triangle on the LCD. This function is * also used internally as part of the ra8875_rectandle implementation. * * NOTE: This non-standard function is not available to applications in the * protected or kernel build modes. * **************************************************************************************/ #ifdef CONFIG_LCD_RA8875_EXTENDED void ra8875_drawtriangle(FAR struct lcd_dev_s *dev, uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t color, bool fill) { FAR struct ra8875_dev_s *priv = (FAR struct ra8875_dev_s *)dev; FAR struct ra8875_lcd_s *lcd = priv->lcd; uint8_t draw_cmd = RA8875_DCR_TRIANGLE; uint16_t _x0, _x1, _x2; uint16_t _y0, _y1, _y2; /* Set the color to use for filling */ ra8875_setforeground(lcd, color); if (fill) { draw_cmd |= RA8875_DCR_FILL; } /* Setup coordinates */ #if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) _x0 = x0; _x1 = x1; _x2 = x2; _y0 = y0; _y1 = y1; _y2 = y2; #else /* CONFIG_LCD_PORTRAIT or CONFIG_LCD_RPORTRAIT */ _x0 = y0; _x1 = y1; _x2 = y2; _y0 = x0; _y1 = x1; _y2 = x2; #endif ra8875_putreg16(lcd, RA8875_DLHSR0, _x0); ra8875_putreg16(lcd, RA8875_DLVSR0, _y0); ra8875_putreg16(lcd, RA8875_DLHER0, _x1); ra8875_putreg16(lcd, RA8875_DLVER0, _y1); ra8875_putreg16(lcd, RA8875_DTPH0, _x2); ra8875_putreg16(lcd, RA8875_DTPV0, _y2); /* Run drawing */ ra8875_putreg(lcd, RA8875_DCR, draw_cmd); ra8875_putreg(lcd, RA8875_DCR, draw_cmd | RA8875_DCR_LINE_START); ra8875_waitreg(lcd, RA8875_DCR, RA8875_DCR_LINE_START); } #endif /************************************************************************************** * Name: ra8875_drawcircle * * Description: * This is a non-standard function to draw a circle on the LCD. This function is * also used internally as part of the ra8875_rectandle implementation. * * NOTE: This non-standard function is not available to applications in the * protected or kernel build modes. * **************************************************************************************/ #ifdef CONFIG_LCD_RA8875_EXTENDED void ra8875_drawcircle(FAR struct lcd_dev_s *dev, uint16_t x, uint16_t y, uint8_t radius, uint16_t color, bool fill) { FAR struct ra8875_dev_s *priv = (FAR struct ra8875_dev_s *)dev; FAR struct ra8875_lcd_s *lcd = priv->lcd; uint8_t draw_cmd = 0; uint16_t _x, _y; /* Set the color to use for filling */ ra8875_setforeground(lcd, color); if (fill) { draw_cmd |= RA8875_DCR_FILL; } /* Setup coordinates */ #if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) _x = x; _y = y; #else /* CONFIG_LCD_PORTRAIT or CONFIG_LCD_RPORTRAIT */ _x = y; _y = x; #endif ra8875_putreg16(lcd, RA8875_DCHR0, _x); ra8875_putreg16(lcd, RA8875_DCVR0, _y); ra8875_putreg(lcd, RA8875_DCRR, radius); /* Run drawing */ ra8875_putreg(lcd, RA8875_DCR, draw_cmd); ra8875_putreg(lcd, RA8875_DCR, draw_cmd | RA8875_DCR_CIRCLE_START); ra8875_waitreg(lcd, RA8875_DCR, RA8875_DCR_CIRCLE_START); } #endif #endif /* CONFIG_LCD_RA8875 */