/*********************************************************************** * cancel.c * * Copyright (C) 2007 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name Gregory Nutt nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ***********************************************************************/ #include #include #include #include #include "ostest.h" static pthread_mutex_t mutex; static pthread_cond_t cond; static void *thread_waiter(void *parameter) { int status; /* Take the mutex */ printf("thread_waiter: Taking mutex\n"); status = pthread_mutex_lock(&mutex); if (status != 0) { printf("thread_waiter: ERROR pthread_mutex_lock failed, status=%d\n", status); } printf("thread_waiter: Starting wait for condition\n"); /* Are we a non-cancelable thread? Yes, set the non-cancelable state */ if (!parameter) { printf("thread_waiter: Setting non-cancelable\n"); status = pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, NULL); if (status != 0) { printf("thread_waiter: ERROR pthread_setcancelstate failed, status=%d\n", status); } } /* The wait -- we will never awaken from this. */ status = pthread_cond_wait(&cond, &mutex); if (status != 0) { printf("thread_waiter: ERROR pthread_cond_wait failed, status=%d\n", status); } /* Release the mutex */ printf("thread_waiter: Releasing mutex\n"); status = pthread_mutex_unlock(&mutex); if (status != 0) { printf("thread_waiter: ERROR pthread_mutex_unlock failed, status=%d\n", status); } /* Set the cancelable state */ printf("thread_waiter: Setting cancelable\n"); status = pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, NULL); if (status != 0) { printf("thread_waiter: ERROR pthread_setcancelstate failed, status=%d\n", status); } printf("thread_waiter: Exit with status 0x12345678\n"); pthread_exit((pthread_addr_t)0x12345678); return NULL; } static void start_thread(pthread_t *waiter, int cancelable) { pthread_attr_t attr; int status; /* Initialize the mutex */ printf("start_thread: Initializing mutex\n"); status = pthread_mutex_init(&mutex, NULL); if (status != 0) { printf("start_thread: ERROR pthread_mutex_init failed, status=%d\n", status); } /* Initialize the condition variable */ printf("start_thread: Initializing cond\n"); status = pthread_cond_init(&cond, NULL); if (status != 0) { printf("start_thread: ERROR pthread_cond_init failed, status=%d\n", status); } /* Set up attributes */ status = pthread_attr_init(&attr); if (status != 0) { printf("start_thread: pthread_attr_init failed, status=%d\n", status); } status = pthread_attr_setstacksize(&attr, 16384); if (status != 0) { printf("start_thread: pthread_attr_setstacksize failed, status=%d\n", status); } /* Start the waiter thread */ printf("start_thread: Starting thread\n"); status = pthread_create(waiter, &attr, thread_waiter, (pthread_addr_t)cancelable); if (status != 0) { printf("start_thread: ERROR pthread_create failed, status=%d\n", status); } /* Make sure that the waiter thread gets a chance to run */ printf("start_thread: Yielding\n"); pthread_yield(); } static void restart_thread(pthread_t *waiter, int cancelable) { int status; /* Destroy the condition variable */ printf("restart_thread: Destroying cond\n"); status = pthread_cond_destroy(&cond); if (status != 0) { printf("restart_thread: ERROR pthread_cond_destroy failed, status=%d\n", status); } /* Destroy the mutex */ printf("restart_thread: Destroying mutex\n"); status = pthread_cond_destroy(&cond); if (status != 0) { printf("restart_thread: ERROR pthread_mutex_destroy failed, status=%d\n", status); } /* Then restart the thread */ printf("restart_thread: Re-starting thread\n"); start_thread(waiter, cancelable); } void cancel_test(void) { pthread_t waiter; void *result; int status; /* Test 1: Normal Cancel *********************************************/ /* Start the waiter thread */ printf("cancel_test: Test 1: Normal Cancelation\n"); printf("cancel_test: Starting thread\n"); start_thread(&waiter, 1); /* Then cancel it. It should be in the pthread_cond_wait now */ printf("cancel_test: Canceling thread\n"); status = pthread_cancel(waiter); if (status != 0) { printf("cancel_test: ERROR pthread_cancel failed, status=%d\n", status); } /* Then join to the thread to pick up the result */ printf("cancel_test: Joining\n"); status = pthread_join(waiter, &result); if (status != 0) { printf("cancel_test: ERROR pthread_join failed, status=%d\n", status); } else { printf("cancel_test: waiter exited with result=%p\n", result); if (result != PTHREAD_CANCELED) { printf("cancel_test: ERROR expected result=%p\n", PTHREAD_CANCELED); } else { printf("cancel_test: PASS thread terminated with PTHREAD_CANCELED\n"); } } /* Test 2: Cancel Detached Thread ************************************/ printf("cancel_test: Test 2: Cancelation of detached thread\n"); printf("cancel_test: Re-starting thread\n"); restart_thread(&waiter, 1); /* Detach the thread */ status = pthread_detach(waiter); if (status != 0) { printf("cancel_test: ERROR pthread_detach, status=%d\n", status); } /* Then cancel it. It should be in the pthread_cond_wait now */ printf("cancel_test: Canceling thread\n"); status = pthread_cancel(waiter); if (status != 0) { printf("cancel_test: ERROR pthread_cancel failed, status=%d\n", status); } /* Join should now fail */ printf("cancel_test: Joining\n"); status = pthread_join(waiter, &result); if (status == 0) { printf("cancel_test: ERROR pthread_join succeeded\n"); } else if (status != ESRCH) { printf("cancel_test: ERROR pthread_join failed but with wrong status=%d\n", status); } else { printf("cancel_test: PASS pthread_join failed with status=ESRCH\n"); } /* Test 3: Non-cancelable threads ************************************/ printf("cancel_test: Test 3: Non-cancelable threads\n"); printf("cancel_test: Re-starting thread (non-cancelable)\n"); restart_thread(&waiter, 0); /* Then cancel it. It should be in the pthread_cond_wait now. The * behavior here is non-standard: when the thread is at a cancelation * point, it should be cancelable, even when cancelation is disable. * * The cancelation should succeed, because the cancelation is pending. */ printf("cancel_test: Canceling thread\n"); status = pthread_cancel(waiter); if (status != 0) { printf("cancel_test: ERROR pthread_cancel failed, status=%d\n", status); } /* Signal the thread. It should wake up an restore the cancelable state. * When the cancelable state is re-enabled, the thread should be canceled. */ status = pthread_mutex_lock(&mutex); if (status != 0) { printf("cancel_test: ERROR pthread_mutex_lock failed, status=%d\n", status); } status = pthread_cond_signal(&cond); if (status != 0) { printf("cancel_test: ERROR pthread_cond_signal failed, status=%d\n", status); } status = pthread_mutex_unlock(&mutex); if (status != 0) { printf("cancel_test: ERROR pthread_mutex_unlock failed, status=%d\n", status); } }