############################################################################ # configs/sure-pic32mx/usbnsh/defconfig # # Copyright (C) 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # 3. Neither the name NuttX nor the names of its contributors may be # used to endorse or promote products derived from this software # without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE # COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, # BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS # OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN # ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # ############################################################################ # # Architecture Selection # CONFIG_ARCH="mips" CONFIG_ARCH_MIPS=y CONFIG_ARCH_MIPS32=y CONFIG_ARCH_CHIP="pic32mx" CONFIG_ARCH_CHIP_PIC32MX440F512H=y CONFIG_ARCH_BOARD="sure-pic32mx" CONFIG_ARCH_BOARD_SUREPIC32MX=y CONFIG_ARCH_DBDP11215=y CONFIG_ARCH_DBDP11212=n CONFIG_BOARD_LOOPSPERMSEC=4275 CONFIG_DRAM_SIZE=32768 CONFIG_DRAM_START=0xa0000000 CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y CONFIG_ARCH_BOOTLOADER=n CONFIG_ARCH_LEDS=y CONFIG_ARCH_BUTTONS=n CONFIG_ARCH_CALIBRATION=n CONFIG_ARCH_DMA=n # # Enable support for RAM-based functions # (If selected, then modifications are needed in ld.script as well) # CONFIG_PIC32MX_RAMFUNCS=n # # Identify toolchain and linker options # CONFIG_PIC32MX_MICROCHIPW=n CONFIG_PIC32MX_MICROCHIPL=n CONFIG_PIC32MX_MICROCHIPW_LITE=y CONFIG_PIC32MX_MICROCHIPL_LITE=n # # Individual subsystems can be enabled: # CONFIG_PIC32MX_WDT=n CONFIG_PIC32MX_RTCC=n CONFIG_PIC32MX_TIMER1=n CONFIG_PIC32MX_TIMER2=n CONFIG_PIC32MX_TIMER3=n CONFIG_PIC32MX_TIMER4=n CONFIG_PIC32MX_TIMER5=n CONFIG_PIC32MX_IC1=n CONFIG_PIC32MX_IC2=n CONFIG_PIC32MX_IC3=n CONFIG_PIC32MX_IC4=n CONFIG_PIC32MX_IC5=n CONFIG_PIC32MX_OC1=n CONFIG_PIC32MX_OC2=n CONFIG_PIC32MX_OC3=n CONFIG_PIC32MX_OC4=n CONFIG_PIC32MX_OC5=n CONFIG_PIC32MX_I2C1=n CONFIG_PIC32MX_I2C2=n CONFIG_PIC32MX_SPI2=n CONFIG_PIC32MX_UART1=n CONFIG_PIC32MX_UART2=y CONFIG_PIC32MX_PMP=n CONFIG_PIC32MX_ADC=n CONFIG_PIC32MX_CVR=n CONFIG_PIC32MX_CM1=n CONFIG_PIC32MX_CM2=n CONFIG_PIC32MX_OSC=y CONFIG_PIC32MX_DDP=n CONFIG_PIC32MX_FLASH=n CONFIG_PIC32MX_BMX=n CONFIG_PIC32MX_DMA=n CONFIG_PIC32MX_CHE=n CONFIG_PIC32MX_USBDEV=y CONFIG_PIC32MX_USBHOST=n CONFIG_PIC32MX_IOPORTA=y CONFIG_PIC32MX_IOPORTB=y CONFIG_PIC32MX_IOPORTC=y CONFIG_PIC32MX_IOPORTD=y CONFIG_PIC32MX_IOPORTE=y CONFIG_PIC32MX_IOPORTF=y CONFIG_PIC32MX_IOPORTG=y # # PIC32MX Configuration Settings # CONFIG_PIC32MX_DEBUGGER=2 CONFIG_PIC32MX_ICESEL=1 # # PIC32MX specific serial device driver settings # CONFIG_UART1_SERIAL_CONSOLE=n CONFIG_UART2_SERIAL_CONSOLE=n CONFIG_UART1_TXBUFSIZE=256 CONFIG_UART2_TXBUFSIZE=256 CONFIG_UART1_RXBUFSIZE=256 CONFIG_UART2_RXBUFSIZE=256 CONFIG_UART1_BAUD=115200 CONFIG_UART2_BAUD=115200 CONFIG_UART1_BITS=8 CONFIG_UART2_BITS=8 CONFIG_UART1_PARITY=0 CONFIG_UART2_PARITY=0 CONFIG_UART1_2STOP=0 CONFIG_UART2_2STOP=0 # # PIC32MX-specific USB device setup # CONFIG_PIC32MX_USBDEV_REGDEBUG=n CONFIG_PIC32MX_USBDEV_BDTDEBUG=n # # General build options # CONFIG_RRLOAD_BINARY=n CONFIG_INTELHEX_BINARY=y CONFIG_MOTOROLA_SREC=n CONFIG_RAW_BINARY=n # # General OS setup # CONFIG_USER_ENTRYPOINT="nsh_main" CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n CONFIG_DEBUG_SCHED=n CONFIG_DEBUG_USB=n CONFIG_HAVE_CXX=n CONFIG_HAVE_CXXINITIALIZE=n CONFIG_MM_REGIONS=1 CONFIG_ARCH_LOWPUTC=y CONFIG_RR_INTERVAL=0 CONFIG_SCHED_INSTRUMENTATION=n CONFIG_TASK_NAME_SIZE=0 CONFIG_START_YEAR=2012 CONFIG_START_MONTH=3 CONFIG_START_DAY=6 CONFIG_GREGORIAN_TIME=n CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y CONFIG_DEV_LOWCONSOLE=n CONFIG_MUTEX_TYPES=n CONFIG_PRIORITY_INHERITANCE=n CONFIG_SEM_PREALLOCHOLDERS=0 CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y CONFIG_SCHED_WORKQUEUE=n CONFIG_SCHED_WORKPRIORITY=192 CONFIG_SCHED_WORKPERIOD=50000 CONFIG_SCHED_WORKSTACKSIZE=1024 CONFIG_SIG_SIGWORK=4 CONFIG_SCHED_WAITPID=y CONFIG_SCHED_ATEXIT=n # # Settings for nxflat # CONFIG_NXFLAT=n CONFIG_NXFLAT_DUMPBUFFER=n CONFIG_SYMTAB_ORDEREDBYNAME=y # # The following can be used to disable categories of # APIs supported by the OS. If the compiler supports # weak functions, then it should not be necessary to # disable functions unless you want to restrict usage # of those APIs. # # There are certain dependency relationships in these # features. # # o mq_notify logic depends on signals to awaken tasks # waiting for queues to become full or empty. # o pthread_condtimedwait() depends on signals to wake # up waiting tasks. # CONFIG_DISABLE_CLOCK=n CONFIG_DISABLE_POSIX_TIMERS=n CONFIG_DISABLE_PTHREAD=n CONFIG_DISABLE_SIGNALS=n CONFIG_DISABLE_MQUEUE=n CONFIG_DISABLE_MOUNTPOINT=n CONFIG_DISABLE_ENVIRON=n CONFIG_DISABLE_POLL=y # # Misc libc settings # CONFIG_NOPRINTF_FIELDWIDTH=n # # Allow for architecture optimized implementations # # The architecture can provide optimized versions of the # following to improve system performance # CONFIG_ARCH_MEMCPY=n CONFIG_ARCH_MEMCMP=n CONFIG_ARCH_MEMMOVE=n CONFIG_ARCH_MEMSET=n CONFIG_ARCH_STRCMP=n CONFIG_ARCH_STRCPY=n CONFIG_ARCH_STRNCPY=n CONFIG_ARCH_STRLEN=n CONFIG_ARCH_STRNLEN=n CONFIG_ARCH_BZERO=n # # Sizes of configurable things (0 disables) # CONFIG_MAX_TASKS=16 CONFIG_MAX_TASK_ARGS=4 CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=8 CONFIG_NFILE_STREAMS=8 CONFIG_NAME_MAX=32 CONFIG_STDIO_BUFFER_SIZE=64 CONFIG_STDIO_LINEBUFFER=y CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=4 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=2 CONFIG_PREALLOC_WDOGS=4 CONFIG_PREALLOC_TIMERS=4 # # Filesystem configuration # CONFIG_FS_FAT=y CONFIG_FAT_LCNAMES=y CONFIG_FAT_LFN=y CONFIG_FAT_MAXFNAME=32 CONFIG_FS_NXFFS=n CONFIG_FS_ROMFS=n # # Maintain legacy build behavior (revisit) # CONFIG_MMCSD=y CONFIG_MMCSD_SPI=y CONFIG_MMCSD_SDIO=y # # SPI-based MMC/SD driver # CONFIG_MMCSD_NSLOTS=1 CONFIG_MMCSD_READONLY=n CONFIG_MMCSD_SPICLOCK=12500000 # # Block driver buffering # CONFIG_FS_READAHEAD=n CONFIG_FS_WRITEBUFFER=n # # SDIO-based MMC/SD driver # CONFIG_SDIO_DMA=n CONFIG_MMCSD_MMCSUPPORT=n CONFIG_MMCSD_HAVECARDDETECT=n # # TCP/IP and UDP support via uIP # CONFIG_NET=n CONFIG_NET_IPv6=n CONFIG_NSOCKET_DESCRIPTORS=0 CONFIG_NET_SOCKOPTS=y CONFIG_NET_BUFSIZE=420 CONFIG_NET_TCP=n CONFIG_NET_TCP_CONNS=40 CONFIG_NET_MAX_LISTENPORTS=40 CONFIG_NET_UDP=n CONFIG_NET_UDP_CHECKSUMS=y #CONFIG_NET_UDP_CONNS=10 CONFIG_NET_ICMP=n CONFIG_NET_ICMP_PING=n #CONFIG_NET_PINGADDRCONF=0 CONFIG_NET_STATISTICS=y #CONFIG_NET_RECEIVE_WINDOW= #CONFIG_NET_ARPTAB_SIZE=8 CONFIG_NET_BROADCAST=n # # UIP Network Utilities # CONFIG_NET_DHCP_LIGHT=n CONFIG_NET_RESOLV_ENTRIES=4 # # USB Device Configuration # CONFIG_USBDEV=y CONFIG_USBDEV_ISOCHRONOUS=n CONFIG_USBDEV_DUALSPEED=n CONFIG_USBDEV_SELFPOWERED=y CONFIG_USBDEV_REMOTEWAKEUP=n CONFIG_USBDEV_MAXPOWER=100 CONFIG_USBDEV_TRACE=n CONFIG_USBDEV_TRACE_NRECORDS=128 # # USB Serial Device Configuration # CONFIG_PL2303=n CONFIG_PL2303_EPINTIN=1 CONFIG_PL2303_EPBULKOUT=2 CONFIG_PL2303_EPBULKIN=5 CONFIG_PL2303_NWRREQS=4 CONFIG_PL2303_NRDREQS=4 CONFIG_PL2303_VENDORID=0x067b CONFIG_PL2303_PRODUCTID=0x2303 CONFIG_PL2303_VENDORSTR="Nuttx" CONFIG_PL2303_PRODUCTSTR="USBdev Serial" CONFIG_PL2303_RXBUFSIZE=512 CONFIG_PL2303_TXBUFSIZE=512 # # USB serial device class driver (Standard CDC ACM class) # CONFIG_CDCACM=y CONFIG_CDCACM_CONSOLE=y #CONFIG_CDCACM_EP0MAXPACKET #CONFIG_CDCACM_EPINTIN #CONFIG_CDCACM_EPINTIN_FSSIZE #CONFIG_CDCACM_EPINTIN_HSSIZE #CONFIG_CDCACM_EPBULKOUT #CONFIG_CDCACM_EPBULKOUT_FSSIZE #CONFIG_CDCACM_EPBULKOUT_HSSIZE #CONFIG_CDCACM_EPBULKIN #CONFIG_CDCACM_EPBULKIN_FSSIZE #CONFIG_CDCACM_EPBULKIN_HSSIZE #CONFIG_CDCACM_NWRREQS #CONFIG_CDCACM_NRDREQS #CONFIG_CDCACM_VENDORID #CONFIG_CDCACM_VENDORSTR #CONFIG_CDCACM_PRODUCTID #CONFIG_CDCACM_PRODUCTSTR #CONFIG_CDCACM_RXBUFSIZE #CONFIG_CDCACM_TXBUFSIZE # # USB Storage Device Configuration # CONFIG_USBMSC=n CONFIG_USBMSC_EP0MAXPACKET=64 CONFIG_USBMSC_EPBULKOUT=1 CONFIG_USBMSC_EPBULKIN=2 CONFIG_USBMSC_NRDREQS=8 CONFIG_USBMSC_NWRREQS=2 CONFIG_USBMSC_BULKINREQLEN=256 CONFIG_USBMSC_BULKOUTREQLEN=64 CONFIG_USBMSC_VENDORID=0x584e CONFIG_USBMSC_VENDORSTR="NuttX" CONFIG_USBMSC_PRODUCTID=0x5342 CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" CONFIG_USBMSC_VERSIONNO=0x0399 CONFIG_USBMSC_REMOVABLE=y # # Settings for examples/uip # CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002 CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001 CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00 CONFIG_EXAMPLES_UIP_DHCPC=n # # Settings for examples/nettest # CONFIG_EXAMPLES_NETTEST_SERVER=n CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n CONFIG_EXAMPLES_NETTEST_NOMAC=y CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 # # Settings for examples/ostest # CONFIG_EXAMPLES_OSTEST_LOOPS=1 CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 # # Settings for apps/nshlib # CONFIG_NSH_BUILTIN_APPS=y CONFIG_NSH_FILEIOSIZE=512 CONFIG_NSH_STRERROR=n CONFIG_NSH_LINELEN=64 CONFIG_NSH_NESTDEPTH=3 CONFIG_NSH_DISABLESCRIPT=n CONFIG_NSH_DISABLEBG=n CONFIG_NSH_ROMFSETC=n CONFIG_NSH_CONSOLE=y CONFIG_NSH_TELNET=n CONFIG_NSH_ARCHINIT=y CONFIG_NSH_IOBUFFER_SIZE=512 CONFIG_NSH_DHCPC=n CONFIG_NSH_NOMAC=n CONFIG_NSH_IPADDR=0x0a000002 CONFIG_NSH_DRIPADDR=0x0a000001 CONFIG_NSH_NETMASK=0xffffff00 CONFIG_NSH_ROMFSMOUNTPT="/etc" CONFIG_NSH_INITSCRIPT="init.d/rcS" CONFIG_NSH_ROMFSDEVNO=0 CONFIG_NSH_ROMFSSECTSIZE=64 CONFIG_NSH_FATDEVNO=1 CONFIG_NSH_FATSECTSIZE=512 CONFIG_NSH_FATNSECTORS=1024 CONFIG_NSH_FATMOUNTPT="/tmp" # # Architecture-specific NSH options # CONFIG_NSH_MMCSDSPIPORTNO=2 CONFIG_NSH_MMCSDSLOTNO=0 CONFIG_NSH_MMCSDMINOR=0 # # Settings for examples/usbserial # CONFIG_EXAMPLES_USBSERIAL_INONLY=n CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n # # Settings for examples/usbstorage # CONFIG_EXAMPLES_USBMSC_NLUNS=1 CONFIG_EXAMPLES_USBMSC_DEVMINOR1=0 CONFIG_EXAMPLES_USBMSC_DEVPATH1="/dev/mmcsd0" CONFIG_EXAMPLES_USBMSC_TRACEINIT=n CONFIG_EXAMPLES_USBMSC_TRACECLASS=n CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS=n CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER=n CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS=n # # Settings for examples/usbterm # CONFIG_EXAMPLES_USBTERM_BUILTIN=y CONFIG_EXAMPLES_USBTERM_DEVINIT=y #CONFIG_EXAMPLES_USBTERM_BUFLEN CONFIG_EXAMPLES_USBTERM_TRACEINIT=n CONFIG_EXAMPLES_USBTERM_TRACECLASS=n CONFIG_EXAMPLES_USBTERM_TRACETRANSFERS=n CONFIG_EXAMPLES_USBTERM_TRACECONTROLLER=n CONFIG_EXAMPLES_USBTERM_TRACEINTERRUPTS=n # # Settings for examples/cdcacm # # Configuration prequisites: # CONFIG_EXAMPLES_CDCACM_DEVMINOR=0 CONFIG_EXAMPLES_CDCACM_TRACEINIT=n CONFIG_EXAMPLES_CDCACM_TRACECLASS=n CONFIG_EXAMPLES_CDCACM_TRACETRANSFERS=n CONFIG_EXAMPLES_CDCACM_TRACECONTROLLER=n CONFIG_EXAMPLES_CDCACM_TRACEINTERRUPTS=n # # Stack and heap information # CONFIG_BOOT_RUNFROMFLASH=n CONFIG_BOOT_COPYTORAM=n CONFIG_CUSTOM_STACK=n CONFIG_IDLETHREAD_STACKSIZE=2048 CONFIG_USERMAIN_STACKSIZE=2048 CONFIG_PTHREAD_STACK_MIN=256 CONFIG_PTHREAD_STACK_DEFAULT=2048 CONFIG_HEAP_BASE= CONFIG_HEAP_SIZE=