/**************************************************************************** * fs/smartfs/smartfs_procfs.c * * Copyright (C) 2013-2014 Ken Pettit. All rights reserved. * Author: Ken Pettit * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "smartfs.h" #if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_EXCLUDE_SMARTFS) /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /**************************************************************************** * Private Types ****************************************************************************/ /* This enumeration identifies all of the thread attributes that can be * accessed via the procfs file system. */ /* Level 1 is the directory of attributes */ struct smartfs_level1_s { struct procfs_dir_priv_s base; /* Base directory private data */ /* Add context specific data types here for managing the directory * open / read / stat, etc. */ FAR struct smartfs_mountpt_s *mount; uint8_t direntry; }; /* This structure describes one open "file" */ struct smartfs_file_s { struct procfs_file_s base; /* Base open file structure */ /* Add context specific data types for managing an open file here */ struct smartfs_level1_s level1; /* Reference to item being accessed */ uint16_t offset; }; struct smartfs_procfs_entry_s { const char *name; /* Name of the directory entry */ size_t (*read)(FAR struct file *filep, FAR char *buffer, size_t buflen); ssize_t (*write)(FAR struct file *filep, FAR const char *buffer, size_t buflen); uint8_t type; }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* File system methods */ static int smartfs_open(FAR struct file *filep, FAR const char *relpath, int oflags, mode_t mode); static int smartfs_close(FAR struct file *filep); static ssize_t smartfs_read(FAR struct file *filep, FAR char *buffer, size_t buflen); static ssize_t smartfs_write(FAR struct file *filep, FAR const char *buffer, size_t buflen); static int smartfs_dup(FAR const struct file *oldp, FAR struct file *newp); static int smartfs_opendir(const char *relpath, FAR struct fs_dirent_s *dir); static int smartfs_closedir(FAR struct fs_dirent_s *dir); static int smartfs_readdir(FAR struct fs_dirent_s *dir); static int smartfs_rewinddir(FAR struct fs_dirent_s *dir); static int smartfs_stat(FAR const char *relpath, FAR struct stat *buf); static ssize_t smartfs_debug_write(FAR struct file *filep, FAR const char *buffer, size_t buflen); static size_t smartfs_status_read(FAR struct file *filep, FAR char *buffer, size_t buflen); #ifdef CONFIG_MTD_SMART_ALLOC_DEBUG static size_t smartfs_mem_read(FAR struct file *filep, FAR char *buffer, size_t buflen); #endif #ifdef CONFIG_MTD_SMART_SECTOR_ERASE_DEBUG static size_t smartfs_erasemap_read(FAR struct file *filep, FAR char *buffer, size_t buflen); #endif #ifdef CONFIG_SMARTFS_FILE_SECTOR_DEBUG static size_t smartfs_files_read(FAR struct file *filep, FAR char *buffer, size_t buflen); #endif /**************************************************************************** * Private Data ****************************************************************************/ static const struct smartfs_procfs_entry_s g_direntry[] = { { "debuglevel", NULL, smartfs_debug_write, DTYPE_FILE }, #ifdef CONFIG_MTD_SMART_SECTOR_ERASE_DEBUG { "erasemap", smartfs_erasemap_read, NULL, DTYPE_FILE }, #endif #ifdef CONFIG_MTD_SMART_ALLOC_DEBUG { "mem", smartfs_mem_read, NULL, DTYPE_FILE }, #endif { "status", smartfs_status_read, NULL, DTYPE_FILE } }; static const uint8_t g_direntrycount = sizeof(g_direntry) / sizeof(struct smartfs_procfs_entry_s); /**************************************************************************** * Public Data ****************************************************************************/ /* See include/nutts/fs/procfs.h * We use the old-fashioned kind of initializers so that this will compile * with any compiler. */ const struct procfs_operations smartfs_procfsoperations = { smartfs_open, /* open */ smartfs_close, /* close */ smartfs_read, /* read */ /* No write supported */ smartfs_write, /* write */ smartfs_dup, /* dup */ smartfs_opendir, /* opendir */ smartfs_closedir, /* closedir */ smartfs_readdir, /* readdir */ smartfs_rewinddir, /* rewinddir */ smartfs_stat /* stat */ }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: smartfs_find_dirref * * Description: * Analyse relpath to find the directory reference entry it represents, * if any. * ****************************************************************************/ static int smartfs_find_dirref(FAR const char *relpath, FAR struct smartfs_level1_s *level1) { int ret = -ENOENT; FAR struct smartfs_mountpt_s *mount; uint16_t x; FAR char * str; mount = smartfs_get_first_mount(); /* Skip the "fs/smartfs" portion of relpath */ if (strncmp(relpath, "fs/smartfs", 10) == 0) { relpath += 10; } if (relpath[0] == '/') { relpath++; } /* Now test if doing a full dir listing of fs/smartfs */ if (relpath[0] == '\0') { /* Save the mount as the first one to display */ level1->mount = mount; level1->base.level = 1; level1->base.nentries = 0; while (mount != NULL) { level1->base.nentries++; mount = mount->fs_next; } level1->base.index = 0; ret = OK; } else { /* Search for the requested entry */ str = strchr(relpath, '/'); if (str) { x = str - relpath; } else { x = strlen(relpath); } while (mount) { if (strncmp(mount->fs_blkdriver->i_name, relpath, x) == 0) { /* Found the mount point. Just break */ break; } /* Try the next mount */ mount = mount->fs_next; } if (mount) { /* Save the mount and skip it in the relpath */ ret = OK; level1->mount = mount; relpath += strlen(mount->fs_blkdriver->i_name); if (relpath[0] == '/') { relpath++; } /* Test if a level 3 directory entry being requested or not */ if (relpath[0] == '\0') { /* Requesting directory listing of a specific SMARTFS mount or entry */ level1->base.level = 2; level1->base.nentries = g_direntrycount; level1->base.index = 0; } else { /* Find the level 3 directory entry */ level1->base.level = 3; level1->base.nentries = 1; level1->base.index = 0; level1->direntry = 0; while (level1->direntry < g_direntrycount) { /* Test if this entry matches */ if (strcmp(relpath, g_direntry[level1->direntry].name) == 0) { break; } /* Advance to next entry */ level1->direntry++; } /* Test if entry found or not */ if (level1->direntry == g_direntrycount) { ret = -ENOENT; } } } } return ret; } /**************************************************************************** * Name: smartfs_open ****************************************************************************/ static int smartfs_open(FAR struct file *filep, FAR const char *relpath, int oflags, mode_t mode) { FAR struct smartfs_file_s *priv; int ret; finfo("Open '%s'\n", relpath); /* PROCFS is read-only. Any attempt to open with any kind of write * access is not permitted. * * REVISIT: Write-able proc files could be quite useful. */ if (((oflags & O_WRONLY) != 0 || (oflags & O_RDONLY) == 0) && (smartfs_procfsoperations.write == NULL)) { ferr("ERROR: Only O_RDONLY supported\n"); return -EACCES; } /* Allocate a container to hold the task and attribute selection */ priv = (FAR struct smartfs_file_s *)kmm_malloc(sizeof(struct smartfs_file_s)); if (!priv) { ferr("ERROR: Failed to allocate file attributes\n"); return -ENOMEM; } /* Find the directory entry being opened */ ret = smartfs_find_dirref(relpath, &priv->level1); if (ret == -ENOENT) { /* Entry not found */ kmm_free(priv); return ret; } priv->offset = 0; /* Save the index as the open-specific state in filep->f_priv */ filep->f_priv = (FAR void *)priv; return OK; } /**************************************************************************** * Name: smartfs_close ****************************************************************************/ static int smartfs_close(FAR struct file *filep) { FAR struct smartfs_file_s *priv; /* Recover our private data from the struct file instance */ priv = (FAR struct smartfs_file_s *)filep->f_priv; DEBUGASSERT(priv); /* Release the file attributes structure */ kmm_free(priv); filep->f_priv = NULL; return OK; } /**************************************************************************** * Name: smartfs_read ****************************************************************************/ static ssize_t smartfs_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { FAR struct smartfs_file_s *priv; ssize_t ret; finfo("buffer=%p buflen=%d\n", buffer, (int)buflen); /* Recover our private data from the struct file instance */ priv = (FAR struct smartfs_file_s *)filep->f_priv; DEBUGASSERT(priv); /* Perform the read based on the directory entry */ ret = 0; if (priv->level1.base.level == 3) { if (priv->level1.direntry < g_direntrycount) { if (g_direntry[priv->level1.direntry].read) { ret = g_direntry[priv->level1.direntry].read(filep, buffer, buflen); } } } /* Update the file offset */ if (ret > 0) { filep->f_pos += ret; } return ret; } /**************************************************************************** * Name: smartfs_write ****************************************************************************/ static ssize_t smartfs_write(FAR struct file *filep, FAR const char *buffer, size_t buflen) { FAR struct smartfs_file_s *priv; ssize_t ret; /* Recover our private data from the struct file instance */ priv = (FAR struct smartfs_file_s *)filep->f_priv; DEBUGASSERT(priv); /* Perform the write based on the directory entry */ ret = 0; if (priv->level1.base.level == 3) { if (priv->level1.direntry < g_direntrycount) { if (g_direntry[priv->level1.direntry].write) { ret = g_direntry[priv->level1.direntry].write(filep, buffer, buflen); } } } /* Update the file offset */ if (ret > 0) { filep->f_pos += ret; } return ret; } /**************************************************************************** * Name: smartfs_dup * * Description: * Duplicate open file data in the new file structure. * ****************************************************************************/ static int smartfs_dup(FAR const struct file *oldp, FAR struct file *newp) { FAR struct smartfs_file_s *oldpriv; FAR struct smartfs_file_s *newpriv; finfo("Dup %p->%p\n", oldp, newp); /* Recover our private data from the old struct file instance */ oldpriv = (FAR struct smartfs_file_s *)oldp->f_priv; DEBUGASSERT(oldpriv); /* Allocate a new container to hold the task and attribute selection */ newpriv = (FAR struct smartfs_file_s *)kmm_malloc(sizeof(struct smartfs_file_s)); if (!newpriv) { ferr("ERROR: Failed to allocate file attributes\n"); return -ENOMEM; } /* The copy the file attribtes from the old attributes to the new */ memcpy(newpriv, oldpriv, sizeof(struct smartfs_file_s)); /* Save the new attributes in the new file structure */ newp->f_priv = (FAR void *)newpriv; return OK; } /**************************************************************************** * Name: smartfs_opendir * * Description: * Open a directory for read access * ****************************************************************************/ static int smartfs_opendir(FAR const char *relpath, FAR struct fs_dirent_s *dir) { FAR struct smartfs_level1_s *level1; int ret; finfo("relpath: \"%s\"\n", relpath ? relpath : "NULL"); DEBUGASSERT(relpath && dir && !dir->u.procfs); /* The path refers to the 1st level subdirectory. Allocate the level1 * dirent structure. */ level1 = (FAR struct smartfs_level1_s *) kmm_malloc(sizeof(struct smartfs_level1_s)); if (!level1) { ferr("ERROR: Failed to allocate the level1 directory structure\n"); return -ENOMEM; } /* Initialize base structure components */ ret = smartfs_find_dirref(relpath, level1); if (ret == OK) { dir->u.procfs = (FAR void *) level1; } else { kmm_free(level1); } return ret; } /**************************************************************************** * Name: smartfs_closedir * * Description: Close the directory listing * ****************************************************************************/ static int smartfs_closedir(FAR struct fs_dirent_s *dir) { FAR struct smartfs_level1_s *priv; DEBUGASSERT(dir && dir->u.procfs); priv = dir->u.procfs; if (priv) { kmm_free(priv); } dir->u.procfs = NULL; return OK; } /**************************************************************************** * Name: smartfs_readdir * * Description: Read the next directory entry * ****************************************************************************/ static int smartfs_readdir(struct fs_dirent_s *dir) { FAR struct smartfs_level1_s *level1; int ret, index; DEBUGASSERT(dir && dir->u.procfs); level1 = dir->u.procfs; /* Have we reached the end of the directory */ index = level1->base.index; if (index >= level1->base.nentries) { /* We signal the end of the directory by returning the special * error -ENOENT */ finfo("Entry %d: End of directory\n", index); ret = -ENOENT; } /* We are traversing a subdirectory of task attributes */ else { DEBUGASSERT(level1->base.level >= 1); /* Test the type of directory listing */ if (level1->base.level == 1) { /* Listing the top level (mounted smartfs volumes) */ if (!level1->mount) { return -ENOENT; } dir->fd_dir.d_type = DTYPE_DIRECTORY; strncpy(dir->fd_dir.d_name, level1->mount->fs_blkdriver->i_name, NAME_MAX + 1); /* Advance to next entry */ level1->base.index++; level1->mount = level1->mount->fs_next; } else if (level1->base.level == 2) { /* Listing the contents of a specific mount */ dir->fd_dir.d_type = g_direntry[level1->base.index].type; strncpy(dir->fd_dir.d_name, g_direntry[level1->base.index++].name, NAME_MAX + 1); } else if (level1->base.level == 3) { /* Listing the contents of a specific entry */ dir->fd_dir.d_type = g_direntry[level1->base.index].type; strncpy(dir->fd_dir.d_name, g_direntry[level1->direntry].name, NAME_MAX + 1); level1->base.index++; } /* Set up the next directory entry offset. NOTE that we could use the * standard f_pos instead of our own private index. */ ret = OK; } return ret; } /**************************************************************************** * Name: smartfs_rewindir * * Description: Reset directory read to the first entry * ****************************************************************************/ static int smartfs_rewinddir(struct fs_dirent_s *dir) { FAR struct smartfs_level1_s *priv; DEBUGASSERT(dir && dir->u.procfs); priv = dir->u.procfs; priv->base.index = 0; return OK; } /**************************************************************************** * Name: smartfs_stat * * Description: Return information about a file or directory * ****************************************************************************/ static int smartfs_stat(const char *relpath, struct stat *buf) { int ret; struct smartfs_level1_s level1; /* Decide if the relpath is valid and if it is a file * or a directory and set it's permissions. */ ret = smartfs_find_dirref(relpath, &level1); buf->st_mode = S_IROTH | S_IRGRP | S_IRUSR; if (ret == OK) { if (level1.base.level < 3) { buf->st_mode |= S_IFDIR; } else { /* The entry being stat'ed is lowest level */ if (g_direntry[level1.direntry].type == DTYPE_DIRECTORY) { buf->st_mode |= S_IFDIR; } else { buf->st_mode |= S_IFREG; } /* Test if the entry is writable */ if (g_direntry[level1.direntry].write != NULL) { buf->st_mode |= S_IWOTH | S_IWGRP | S_IWUSR; } } } /* File/directory size, access block size */ buf->st_size = 0; buf->st_blksize = 0; buf->st_blocks = 0; return ret; } /**************************************************************************** * Name: smartfs_debug_write * * Description: Performs the write operation for the "debug" file * ****************************************************************************/ static ssize_t smartfs_debug_write(FAR struct file *filep, FAR const char *buffer, size_t buflen) { struct mtd_smart_debug_data_s debug_data; FAR struct smartfs_file_s *priv; priv = (FAR struct smartfs_file_s *) filep->f_priv; /* Populate the debug_data structure */ debug_data.debugcmd = SMART_DEBUG_CMD_SET_DEBUG_LEVEL; debug_data.debugdata = atoi(buffer); priv->level1.mount->fs_blkdriver->u.i_bops->ioctl( priv->level1.mount->fs_blkdriver, BIOC_DEBUGCMD, (unsigned long) &debug_data); return buflen; } /**************************************************************************** * Name: smartfs_status_read * * Description: Performs the read operation for the "status" dir entry. * ****************************************************************************/ static size_t smartfs_status_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { struct mtd_smart_procfs_data_s procfs_data; FAR struct smartfs_file_s *priv; int ret; size_t len; int utilization; priv = (FAR struct smartfs_file_s *) filep->f_priv; /* Initialize the read length to zero and test if we are at the * end of the file (i.e. already read the data. */ len = 0; if (priv->offset == 0) { /* Get the ProcFS data from the block driver */ ret = priv->level1.mount->fs_blkdriver->u.i_bops->ioctl( priv->level1.mount->fs_blkdriver, BIOC_GETPROCFSD, (unsigned long) &procfs_data); if (ret == OK) { /* Calculate the sector utilization percentage */ if (procfs_data.blockerases == 0) { utilization = 100; } else { utilization = 100 * (procfs_data.blockerases * procfs_data.sectorsperblk - procfs_data.unusedsectors) / (procfs_data.blockerases * procfs_data.sectorsperblk); } /* Format and return data in the buffer */ len = snprintf(buffer, buflen, "Format version: %d\nName Len: %d\n" "Total Sectors: %d\nSector Size: %d\n" "Format Sector: %d\nDir Sector: %d\n" "Free Sectors: %d\nReleased Sectors: %d\n" "Unused Sectors: %d\nBlock Erases: %d\n" "Sectors Per Block: %d\nSector Utilization:%d%%\n" #ifdef CONFIG_MTD_SMART_WEAR_LEVEL "Uneven Wear Count: %d\n" #endif , procfs_data.formatversion, procfs_data.namelen, procfs_data.totalsectors, procfs_data.sectorsize, procfs_data.formatsector, procfs_data.dirsector, procfs_data.freesectors, procfs_data.releasesectors, procfs_data.unusedsectors, procfs_data.blockerases, procfs_data.sectorsperblk, utilization #ifdef CONFIG_MTD_SMART_WEAR_LEVEL , procfs_data.uneven_wearcount #endif ); } /* Indicate we have already provided all the data */ priv->offset = 0xFF; } return len; } /**************************************************************************** * Name: smartfs_mem_read * * Description: Performs the read operation for the "mem" dir entry. * ****************************************************************************/ #ifdef CONFIG_MTD_SMART_ALLOC_DEBUG static size_t smartfs_mem_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { struct mtd_smart_procfs_data_s procfs_data; FAR struct smartfs_file_s *priv; int ret; uint16_t x; size_t len, total; priv = (FAR struct smartfs_file_s *) filep->f_priv; /* Initialize the read length to zero and test if we are at the * end of the file (i.e. already read the data. */ len = 0; if (priv->offset == 0) { /* Get the ProcFS data from the block driver */ ret = priv->level1.mount->fs_blkdriver->u.i_bops->ioctl( priv->level1.mount->fs_blkdriver, BIOC_GETPROCFSD, (unsigned long) &procfs_data); if (ret == OK) { /* Print the allocations to the buffer */ total = 0; len = snprintf(buffer, buflen, "Allocations:\n"); buflen -= len; for (x = 0; x < procfs_data.alloccount; x++) { /* Only print allocations with a non-NULL pointer */ if (procfs_data.allocs[x].ptr != NULL) { len += snprintf(&buffer[len], buflen - len, " %s: %d\n", procfs_data.allocs[x].name, procfs_data.allocs[x].size); total += procfs_data.allocs[x].size; } } /* Add the total allocation amount to the buffer */ len += snprintf(&buffer[len], buflen - len, "\nTotal: %d\n", total); } /* Indicate we have done the read */ priv->offset = 0xFF; } return len; } #endif /**************************************************************************** * Name: smartfs_erasemap_read * * Description: Performs the read operation for the "erase" dir entry. * ****************************************************************************/ #ifdef CONFIG_MTD_SMART_SECTOR_ERASE_DEBUG static size_t smartfs_erasemap_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { struct mtd_smart_procfs_data_s procfs_data; FAR struct smartfs_file_s *priv; int ret, rows, cols; size_t x, y; size_t len, copylen; priv = (FAR struct smartfs_file_s *) filep->f_priv; /* Get the ProcFS data from the block driver */ ret = priv->level1.mount->fs_blkdriver->u.i_bops->ioctl( priv->level1.mount->fs_blkdriver, BIOC_GETPROCFSD, (unsigned long) &procfs_data); if (ret != OK) { return 0; } /* Initialize the read length to zero and test if we are at the * end of the file (i.e. already read the data). */ len = 0; rows = 32; cols = procfs_data.neraseblocks / rows; while (rows >= 4 && (cols < 64 || cols > 128)) { rows >>= 1; cols = procfs_data.neraseblocks / rows; } /* Continue sending data until everything sent. We add 'rows' below to * account for the \n at the end of each line. */ if (priv->offset < procfs_data.neraseblocks + rows) { /* copylen keeps track of the current length. When it is * equal to or greater than the offset, we start sending data * again. Basically we are starting at the beginning each time * and only sending where we left off and discarding the rest. */ copylen = 0; for (y = 0; y < rows; y++) { for (x = 0; x < cols; x++) { /* Copy data to the buffer */ if (copylen >= priv->offset) { buffer[len++] = procfs_data.erasecounts[y * cols + x] + 'A'; priv->offset++; if (len >= buflen) return len; } copylen++; } /* Add a trailing \n */ if (copylen >= priv->offset) { buffer[len++] = '\n'; priv->offset++; if (len >= buflen) return len; } /* Terminate the string */ if (copylen >= priv->offset) { buffer[len++] = '\0'; priv->offset++; } copylen++; } } return len; } #endif /**************************************************************************** * Public Functions ****************************************************************************/ #endif /* CONFIG_FS_PROCFS && !CONFIG_FS_PROCFS_EXCLUDE_SMARTFS */