/**************************************************************************** * net/usrsock/usrsock.h * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ #ifndef __NET_USRSOCK_USRSOCK_H #define __NET_USRSOCK_USRSOCK_H /**************************************************************************** * Included Files ****************************************************************************/ #include #ifdef CONFIG_NET_USRSOCK #include #include #include #include "devif/devif.h" #include "socket/socket.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Internal event flags */ #define USRSOCK_EVENT_CONNECT_READY (1 << 0) #define USRSOCK_EVENT_REQ_COMPLETE (1 << 15) #define USRSOCK_EVENT_INTERNAL_MASK (USRSOCK_EVENT_CONNECT_READY | \ USRSOCK_EVENT_REQ_COMPLETE) /**************************************************************************** * Public Type Definitions ****************************************************************************/ enum usrsock_conn_state_e { USRSOCK_CONN_STATE_UNINITIALIZED = 0, USRSOCK_CONN_STATE_ABORTED, USRSOCK_CONN_STATE_READY, USRSOCK_CONN_STATE_CONNECTING }; struct usrsock_poll_s { FAR struct usrsock_conn_s *conn; /* Needed to handle loss of connection */ struct pollfd *fds; /* Needed to handle poll events */ FAR struct devif_callback_s *cb; /* Needed to teardown the poll */ }; struct usrsock_conn_s { /* Common prologue of all connection structures. */ struct socket_conn_s sconn; /* usrsock-specific content follows */ uint8_t crefs; /* Reference counts on this instance */ enum usrsock_conn_state_e state; /* State of kernel<->daemon link for conn */ bool connected; /* Socket has been connected */ int16_t usockid; /* Connection number used for kernel<->daemon */ uint16_t flags; /* Socket state flags */ struct { sem_t sem; /* Request semaphore (only one outstanding request) */ uint32_t xid; /* Expected message exchange id */ bool inprogress; /* Request was received but daemon is still processing */ uint16_t valuelen; /* Length of value from daemon */ uint16_t valuelen_nontrunc; /* Actual length of value at daemon */ int result; /* Result for request */ uint16_t events; /* Response events for the request */ struct { FAR struct iovec *iov; /* Data request input buffers */ int iovcnt; /* Number of input buffers */ size_t total; /* Total length of buffers */ size_t pos; /* Writer position on input buffer */ } datain; } resp; /* The following is a list of poll structures of threads waiting for * socket events. */ struct usrsock_poll_s pollinfo[CONFIG_NET_USRSOCK_NPOLLWAITERS]; }; struct usrsock_reqstate_s { FAR struct usrsock_conn_s *conn; /* Reference to connection structure */ FAR struct devif_callback_s *cb; /* Reference to callback instance */ sem_t recvsem; /* Semaphore signals recv completion */ int result; /* OK on success, otherwise a negated errno. */ bool completed; bool unlock; /* True: unlock is required */ }; struct usrsock_data_reqstate_s { struct usrsock_reqstate_s reqstate; uint16_t valuelen; uint16_t valuelen_nontrunc; }; /**************************************************************************** * Public Data ****************************************************************************/ #ifdef __cplusplus # define EXTERN extern "C" extern "C" { #else # define EXTERN extern #endif EXTERN const struct sock_intf_s g_usrsock_sockif; /**************************************************************************** * Public Function Prototypes ****************************************************************************/ /**************************************************************************** * Name: usrsock_initialize() * * Description: * Initialize the User Socket connection structures. Called once and only * from the networking layer. * ****************************************************************************/ void usrsock_initialize(void); /**************************************************************************** * Name: usrsock_alloc() * * Description: * Allocate a new, uninitialized usrsock connection structure. This is * normally something done by the implementation of the socket() API * ****************************************************************************/ FAR struct usrsock_conn_s *usrsock_alloc(void); /**************************************************************************** * Name: usrsock_free() * * Description: * Free a usrsock connection structure that is no longer in use. This * should be done by the implementation of close(). * ****************************************************************************/ void usrsock_free(FAR struct usrsock_conn_s *conn); /**************************************************************************** * Name: usrsock_nextconn() * * Description: * Traverse the list of allocated usrsock connections * * Assumptions: * This function is called from usrsock device logic. * ****************************************************************************/ FAR struct usrsock_conn_s *usrsock_nextconn(FAR struct usrsock_conn_s *conn); /**************************************************************************** * Name: usrsock_active() * * Description: * Find a connection structure that is the appropriate * connection for usrsock * ****************************************************************************/ FAR struct usrsock_conn_s *usrsock_active(int16_t usockid); /**************************************************************************** * Name: usrsock_setup_request_callback() ****************************************************************************/ int usrsock_setup_request_callback(FAR struct usrsock_conn_s *conn, FAR struct usrsock_reqstate_s *pstate, FAR devif_callback_event_t event, uint16_t flags); /**************************************************************************** * Name: usrsock_setup_data_request_callback() ****************************************************************************/ int usrsock_setup_data_request_callback(FAR struct usrsock_conn_s *conn, FAR struct usrsock_data_reqstate_s *pstate, FAR devif_callback_event_t event, uint16_t flags); /**************************************************************************** * Name: usrsock_teardown_request_callback() ****************************************************************************/ void usrsock_teardown_request_callback( FAR struct usrsock_reqstate_s *pstate); /**************************************************************************** * Name: usrsock_teardown_data_request_callback() ****************************************************************************/ #define usrsock_teardown_data_request_callback(datastate) \ usrsock_teardown_request_callback(&(datastate)->reqstate) /**************************************************************************** * Name: usrsock_setup_datain ****************************************************************************/ void usrsock_setup_datain(FAR struct usrsock_conn_s *conn, FAR struct iovec *iov, unsigned int iovcnt); /**************************************************************************** * Name: usrsock_teardown_datain ****************************************************************************/ #define usrsock_teardown_datain(conn) usrsock_setup_datain(conn, NULL, 0) /**************************************************************************** * Name: usrsock_event * * Description: * Handler for received connection events * ****************************************************************************/ int usrsock_event(FAR struct usrsock_conn_s *conn); /**************************************************************************** * Name: usrsock_do_request * * Description: * The usrsock_do_request() function will send usrsock request message * to the usrsock network interface driver * ****************************************************************************/ int usrsock_do_request(FAR struct usrsock_conn_s *conn, FAR struct iovec *iov, unsigned int iovcnt); /**************************************************************************** * Name: usrsock_socket * * Description: * socket() creates an endpoint for communication and returns a socket * structure. * * Input Parameters: * domain (see sys/socket.h) * type (see sys/socket.h) * protocol (see sys/socket.h) * psock A pointer to a user allocated socket structure to be * initialized. * * Returned Value: * 0 on success; negative error-code on error * * EACCES * Permission to create a socket of the specified type and/or protocol * is denied. * EAFNOSUPPORT * The implementation does not support the specified address family. * EINVAL * Unknown protocol, or protocol family not available. * EMFILE * Process file table overflow. * ENFILE * The system limit on the total number of open files has been reached. * ENOBUFS or ENOMEM * Insufficient memory is available. The socket cannot be created until * sufficient resources are freed. * EPROTONOSUPPORT * The protocol type or the specified protocol is not supported within * this domain. * ****************************************************************************/ int usrsock_socket(int domain, int type, int protocol, FAR struct socket *psock); /**************************************************************************** * Name: usrsock_close * * Description: * Performs the close operation on a usrsock connection instance * * Input Parameters: * conn usrsock connection instance * * Returned Value: * 0 on success; -1 on error with errno set appropriately. * ****************************************************************************/ int usrsock_close(FAR struct usrsock_conn_s *conn); /**************************************************************************** * Name: usrsock_bind * * Description: * usrsock_bind() gives the socket 'psock' the local address 'addr'. 'addr' * is 'addrlen' bytes long. Traditionally, this is called "assigning a name * to a socket." When a socket is created with socket, it exists in a name * space (address family) but has no name assigned. * * Input Parameters: * psock A reference to the socket structure of the socket to be bound * addr Socket local address * addrlen Length of 'addr' * * Returned Value: * 0 on success; -1 on error with errno set appropriately * * EACCES * The address is protected, and the user is not the superuser. * EADDRINUSE * The given address is already in use. * EINVAL * The socket is already bound to an address. * ENOTSOCK * psock is a descriptor for a file, not a socket. * ****************************************************************************/ int usrsock_bind(FAR struct socket *psock, FAR const struct sockaddr *addr, socklen_t addrlen); /**************************************************************************** * Name: usrsock_connect * * Description: * Perform a usrsock connection * * Input Parameters: * psock A reference to the socket structure of the socket * addr The address of the remote server to connect to * addrlen Length of address buffer * * Returned Value: * None * ****************************************************************************/ int usrsock_connect(FAR struct socket *psock, FAR const struct sockaddr *addr, socklen_t addrlen); /**************************************************************************** * Name: usrsock_listen * * Description: * To accept connections, a socket is first created with psock_socket(), a * willingness to accept incoming connections and a queue limit for * incoming connections are specified with psock_listen(), and then the * connections are accepted with psock_accept(). For the case of AFINET * and AFINET6 sockets, psock_listen() calls this function. The * psock_listen() call applies only to sockets of type SOCK_STREAM or * SOCK_SEQPACKET. * * Parameters: * psock Reference to an internal, bound socket structure. * backlog The maximum length the queue of pending connections may grow. * If a connection request arrives with the queue full, the client * may receive an error with an indication of ECONNREFUSED or, * if the underlying protocol supports retransmission, the request * may be ignored so that retries succeed. * * Returned Value: * On success, zero is returned. On error, a negated errno value is * returned. See listen() for a description of the appropriate error * value. * ****************************************************************************/ int usrsock_listen(FAR struct socket *psock, int backlog); /**************************************************************************** * Name: usrsock_accept * * Description: * The usrsock_accept function is used with connection-based socket * types (SOCK_STREAM, SOCK_SEQPACKET and SOCK_RDM). It extracts the first * connection request on the queue of pending connections, creates a new * connected socket with mostly the same properties as 'psock', and * allocates a new socket descriptor for the socket, which is returned. The * newly created socket is no longer in the listening state. The original * socket 'psock' is unaffected by this call. Per file descriptor flags * are not inherited across an usrsock_accept. * * The 'psock' argument is a socket descriptor that has been created with * socket(), bound to a local address with bind(), and is listening for * connections after a call to listen(). * * On return, the 'addr' structure is filled in with the address of the * connecting entity. The 'addrlen' argument initially contains the size * of the structure pointed to by 'addr'; on return it will contain the * actual length of the address returned. * * If no pending connections are present on the queue, and the socket is * not marked as non-blocking, usrsock_accept blocks the caller until a * connection is present. If the socket is marked non-blocking and no * pending connections are present on the queue, usrsock_accept returns * EAGAIN. * * Parameters: * psock Reference to the listening socket structure * addr Receives the address of the connecting client * addrlen Input: allocated size of 'addr' * Return: returned size of 'addr' * newsock Location to return the accepted socket information. * * Returned Value: * Returns 0 (OK) on success. On failure, it returns a negated errno * value. See accept() for a description of the appropriate error value. * * Assumptions: * The network is locked. * ****************************************************************************/ int usrsock_accept(FAR struct socket *psock, FAR struct sockaddr *addr, FAR socklen_t *addrlen, FAR struct socket *newsock); /**************************************************************************** * Name: usrsock_poll * * Description: * The standard poll() operation redirects operations on socket descriptors * to this function. * * Input Parameters: * psock - An instance of the internal socket structure. * fds - The structure describing the events to be monitored. * setup - true: Setup up the poll; false: Teardown the poll * * Returned Value: * 0: Success; Negated errno on failure * ****************************************************************************/ int usrsock_poll(FAR struct socket *psock, FAR struct pollfd *fds, bool setup); /**************************************************************************** * Name: usrsock_sendmsg * * Description: * If sendmsg() is used on a connection-mode (SOCK_STREAM, SOCK_SEQPACKET) * socket, the parameters 'msg_name' and 'msg_namelen' are ignored (and the * error EISCONN may be returned when they are not NULL and 0), and the * error ENOTCONN is returned when the socket was not actually connected. * * Input Parameters: * psock A reference to the socket structure of the socket * msg Message to send * flags Send flags (ignored) * * Returned Value: * On success, returns the number of characters sent. On any failure, a * negated errno value is returned. * ****************************************************************************/ ssize_t usrsock_sendmsg(FAR struct socket *psock, FAR struct msghdr *msg, int flags); /**************************************************************************** * Name: usrsock_recvmsg * * Description: * recvmsg() receives messages from a socket, and may be used to receive * data on a socket whether or not it is connection-oriented. * * If from is not NULL, and the underlying protocol provides the source * address, this source address is filled in. The argument fromlen * initialized to the size of the buffer associated with from, and modified * on return to indicate the actual size of the address stored there. * * Input Parameters: * psock A pointer to a NuttX-specific, internal socket structure * msg Buffer to receive the message * flags Receive flags (ignored) * * Returned Value: * On success, returns the number of characters received. If no data is * available to be received and the peer has performed an orderly shutdown, * recvfrom() will return 0. Otherwise, on any failure, a negated errno * value is returned. * ****************************************************************************/ ssize_t usrsock_recvmsg(FAR struct socket *psock, FAR struct msghdr *msg, int flags); /**************************************************************************** * Name: usrsock_getsockopt * * Description: * getsockopt() retrieve the value for the option specified by the * 'option' argument at the protocol level specified by the 'level' * argument. If the size of the option value is greater than 'value_len', * the value stored in the object pointed to by the 'value' argument will * be silently truncated. Otherwise, the length pointed to by the * 'value_len' argument will be modified to indicate the actual length * of the 'value'. * * The 'level' argument specifies the protocol level of the option. To * retrieve options at the socket level, specify the level argument as * SOL_SOCKET. * * See a complete list of values for the 'option' argument. * * Input Parameters: * psock Socket structure of the socket to query * level Protocol level to set the option * option identifies the option to get * value Points to the argument value * value_len The length of the argument value * ****************************************************************************/ int usrsock_getsockopt(FAR struct socket *psock, int level, int option, FAR void *value, FAR socklen_t *value_len); /**************************************************************************** * Name: usrsock_setsockopt * * Description: * psock_setsockopt() sets the option specified by the 'option' argument, * at the protocol level specified by the 'level' argument, to the value * pointed to by the 'value' argument for the usrsock connection. * * The 'level' argument specifies the protocol level of the option. To set * options at the socket level, specify the level argument as SOL_SOCKET. * * See a complete list of values for the 'option' argument. * * Input Parameters: * psock Socket structure of the socket to query * level Protocol level to set the option * option identifies the option to set * value Points to the argument value * value_len The length of the argument value * ****************************************************************************/ int usrsock_setsockopt(FAR struct socket *psock, int level, int option, FAR const void *value, socklen_t value_len); /**************************************************************************** * Name: usrsock_getsockname * * Description: * The getsockname() function retrieves the locally-bound name of the * specified socket, stores this address in the sockaddr structure pointed * to by the 'addr' argument, and stores the length of this address in the * object pointed to by the 'addrlen' argument. * * If the actual length of the address is greater than the length of the * supplied sockaddr structure, the stored address will be truncated. * * If the socket has not been bound to a local name, the value stored in * the object pointed to by address is unspecified. * * Input Parameters: * psock A reference to the socket structure of the socket * addr sockaddr structure to receive data [out] * addrlen Length of sockaddr structure [in/out] * ****************************************************************************/ int usrsock_getsockname(FAR struct socket *psock, FAR struct sockaddr *addr, FAR socklen_t *addrlen); /**************************************************************************** * Name: usrsock_getpeername * * Description: * The getpeername() function retrieves the remote-connected name of the * specified socket, stores this address in the sockaddr structure pointed * to by the 'addr' argument, and stores the length of this address in the * object pointed to by the 'addrlen' argument. * * If the actual length of the address is greater than the length of the * supplied sockaddr structure, the stored address will be truncated. * * If the socket has not been bound to a local name, the value stored in * the object pointed to by address is unspecified. * * Input Parameters: * psock A reference to the socket structure of the socket * addr sockaddr structure to receive data [out] * addrlen Length of sockaddr structure [in/out] * ****************************************************************************/ int usrsock_getpeername(FAR struct socket *psock, FAR struct sockaddr *addr, FAR socklen_t *addrlen); /**************************************************************************** * Name: usrsock_ioctl * * Description: * The usrsock_ioctl() function performs network device specific * operations. * * Parameters: * psock A reference to the socket structure of the socket * cmd The ioctl command * arg The argument of the ioctl cmd * ****************************************************************************/ int usrsock_ioctl(FAR struct socket *psock, int cmd, unsigned long arg); /**************************************************************************** * Name: usrsock_shutdown * * Description: * The shutdown() function will cause all or part of a full-duplex * connection on the socket associated with the file descriptor socket to * be shut down. * * The shutdown() function disables subsequent send and/or receive * operations on a socket, depending on the value of the how argument. * * Input Parameters: * psock A reference to the socket structure of the socket * how Specifies the type of shutdown. The values are as follows: * * SHUT_RD - Disables further receive operations. * SHUT_WR - Disables further send operations. * SHUT_RDWR - Disables further send and receive operations. * ****************************************************************************/ int usrsock_shutdown(FAR struct socket *psock, int how); #undef EXTERN #ifdef __cplusplus } #endif #endif /* CONFIG_NET_USRSOCK */ #endif /* __NET_USRSOCK_USRSOCK_H */