/**************************************************************************** * fs/smartfs/smartfs_utils.c * * Copyright (C) 2013-2014 Ken Pettit. All rights reserved. * Author: Ken Pettit * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "smartfs.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define WORKBUFFER_SIZE 256 /**************************************************************************** * Private Data ****************************************************************************/ #if defined(CONFIG_SMARTFS_MULTI_ROOT_DIRS) || \ (defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)) static struct smartfs_mountpt_s *g_mounthead = NULL; #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: smartfs_semtake ****************************************************************************/ void smartfs_semtake(struct smartfs_mountpt_s *fs) { nxsem_wait_uninterruptible(fs->fs_sem); } /**************************************************************************** * Name: smartfs_semgive ****************************************************************************/ void smartfs_semgive(struct smartfs_mountpt_s *fs) { nxsem_post(fs->fs_sem); } /**************************************************************************** * Name: smartfs_rdle16 * * Description: * Get a (possibly unaligned) 16-bit little endian value. * * Input Parameters: * val - A pointer to the first byte of the little endian value. * * Returned Value: * A uint16_t representing the whole 16-bit integer value * ****************************************************************************/ uint16_t smartfs_rdle16(FAR const void *val) { return (uint16_t)((FAR const uint8_t *)val)[1] << 8 | (uint16_t)((FAR const uint8_t *)val)[0]; } /**************************************************************************** * Name: smartfs_wrle16 * * Description: * Put a (possibly unaligned) 16-bit little endian value. * * Input Parameters: * dest - A pointer to the first byte to save the little endian value. * val - The 16-bit value to be saved. * * Returned Value: * None * ****************************************************************************/ void smartfs_wrle16(FAR void *dest, uint16_t val) { ((FAR uint8_t *) dest)[0] = val & 0xff; /* Little endian means LS byte first in byte stream */ ((FAR uint8_t *) dest)[1] = val >> 8; } /**************************************************************************** * Name: smartfs_rdle32 * * Description: * Get a (possibly unaligned) 32-bit little endian value. * * Input Parameters: * val - A pointer to the first byte of the little endian value. * * Returned Value: * A uint32_t representing the whole 32-bit integer value * ****************************************************************************/ uint32_t smartfs_rdle32(FAR const void *val) { /* Little endian means LS halfword first in byte stream */ return (uint32_t)smartfs_rdle16(&((FAR const uint8_t *)val)[2]) << 16 | (uint32_t)smartfs_rdle16(val); } /**************************************************************************** * Name: smartfs_wrle32 * * Description: * Put a (possibly unaligned) 32-bit little endian value. * * Input Parameters: * dest - A pointer to the first byte to save the little endian value. * val - The 32-bit value to be saved. * * Returned Value: * None * ****************************************************************************/ void smartfs_wrle32(uint8_t *dest, uint32_t val) { /* Little endian means LS halfword first in byte stream */ smartfs_wrle16(dest, (uint16_t)(val & 0xffff)); smartfs_wrle16(dest + 2, (uint16_t)(val >> 16)); } /**************************************************************************** * Name: smartfs_mount * * Description: This function is called only when the mountpoint is first * established. It initializes the mountpoint structure and verifies * that a valid SMART filesystem is provided by the block driver. * * The caller should hold the mountpoint semaphore * ****************************************************************************/ int smartfs_mount(struct smartfs_mountpt_s *fs, bool writeable) { FAR struct inode *inode; struct geometry geo; int ret = OK; #if defined(CONFIG_SMARTFS_MULTI_ROOT_DIRS) struct smartfs_mountpt_s *nextfs; #endif /* Assume that the mount is not successful */ fs->fs_mounted = false; /* Check if there is media available */ inode = fs->fs_blkdriver; if (!inode || !inode->u.i_bops || !inode->u.i_bops->geometry || inode->u.i_bops->geometry(inode, &geo) != OK || !geo.geo_available) { ret = -ENODEV; goto errout; } /* Make sure that that the media is write-able (if write access is needed) */ if (writeable && !geo.geo_writeenabled) { ret = -EACCES; goto errout; } /* Get the SMART low-level format information to validate the device has been * formatted and scan properly for logical to physical sector mapping. */ ret = FS_IOCTL(fs, BIOC_GETFORMAT, (unsigned long) &fs->fs_llformat); if (ret != OK) { ferr("ERROR: Error getting device low level format: %d\n", ret); goto errout; } /* Validate the low-level format is valid */ if (!(fs->fs_llformat.flags & SMART_FMT_ISFORMATTED)) { ferr("ERROR: No low-level format found\n"); ret = -ENODEV; goto errout; } /* Allocate a read/write buffer */ #ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS /* Scan linked list of mounted file systems to find another FS with * the same blockdriver. We will reuse the buffers. */ nextfs = g_mounthead; while (nextfs != NULL) { /* Test if this FS uses the same block driver */ if (nextfs->fs_blkdriver == fs->fs_blkdriver) { /* Yep, it's the same block driver. Reuse the buffers. * we can do this because we are protected by the same * semaphore. */ fs->fs_rwbuffer = nextfs->fs_rwbuffer; fs->fs_workbuffer = nextfs->fs_workbuffer; break; } /* Advance to next FS */ nextfs = nextfs->fs_next; } /* If we didn't find a FS above, then allocate some buffers */ if (nextfs == NULL) { fs->fs_rwbuffer = (char *) kmm_malloc(fs->fs_llformat.availbytes); fs->fs_workbuffer = (char *) kmm_malloc(WORKBUFFER_SIZE); } /* Now add ourselves to the linked list of SMART mounts */ fs->fs_next = g_mounthead; g_mounthead = fs; /* Set our root directory sector based on the directory entry * reported by the block driver (based on which device is * associated with this mount. */ fs->fs_rootsector = SMARTFS_ROOT_DIR_SECTOR + fs->fs_llformat.rootdirnum; #else /* CONFIG_SMARTFS_MULTI_ROOT_DIRS */ #if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS) /* Now add ourselves to the linked list of SMART mounts */ fs->fs_next = g_mounthead; g_mounthead = fs; #endif fs->fs_rwbuffer = (char *) kmm_malloc(fs->fs_llformat.availbytes); fs->fs_workbuffer = (char *) kmm_malloc(WORKBUFFER_SIZE); fs->fs_rootsector = SMARTFS_ROOT_DIR_SECTOR; #endif /* CONFIG_SMARTFS_MULTI_ROOT_DIRS */ /* We did it! */ fs->fs_mounted = TRUE; finfo("SMARTFS:\n"); finfo("\t Sector size: %d\n", fs->fs_llformat.sectorsize); finfo("\t Bytes/sector %d\n", fs->fs_llformat.availbytes); finfo("\t Num sectors: %d\n", fs->fs_llformat.nsectors); finfo("\t Free sectors: %d\n", fs->fs_llformat.nfreesectors); finfo("\t Max filename: %d\n", CONFIG_SMARTFS_MAXNAMLEN); #ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS finfo("\t RootDirEntries: %d\n", fs->fs_llformat.nrootdirentries); #endif finfo("\t RootDirSector: %d\n", fs->fs_rootsector); errout: return ret; } /**************************************************************************** * Name: smartfs_unmount * * Description: This function is called only when the mountpoint is being * unbound. If we are serving multiple directories, then we have to * remove ourselves from the mount linked list, and potentially free * the shared buffers. * * The caller should hold the mountpoint semaphore * ****************************************************************************/ int smartfs_unmount(struct smartfs_mountpt_s *fs) { int ret = OK; struct inode *inode; #if defined(CONFIG_SMARTFS_MULTI_ROOT_DIRS) || \ (defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)) struct smartfs_mountpt_s *nextfs; struct smartfs_mountpt_s *prevfs; int count = 0; int found = FALSE; #endif #if defined(CONFIG_SMARTFS_MULTI_ROOT_DIRS) || \ (defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)) /* Start at the head of the mounts and search for our entry. Also * count the number of entries that match our blkdriver. */ nextfs = g_mounthead; prevfs = NULL; while (nextfs != NULL) { /* Test if this FS's blkdriver matches ours (it could be us) */ if (nextfs->fs_blkdriver == fs->fs_blkdriver) count++; /* Test if this entry is our's */ if (nextfs == fs) { found = TRUE; } /* Keep track of the previous entry until our's is found */ if (!found) { /* Save this entry as the previous entry */ prevfs = nextfs; } /* Advance to the next entry */ nextfs = nextfs->fs_next; } /* Ensure we found our FS */ if (!found) { /* Our entry not found! Invalid unmount or bug somewhere */ return -EINVAL; } /* If the count is only one, then we need to delete the shared * buffers because we are the last ones. */ if (count == 1) { /* Close the block driver */ if (fs->fs_blkdriver) { inode = fs->fs_blkdriver; if (inode) { if (inode->u.i_bops && inode->u.i_bops->close) { inode->u.i_bops->close(inode); } } } /* Free the buffers */ kmm_free(fs->fs_rwbuffer); kmm_free(fs->fs_workbuffer); /* Set the buffer's to invalid value to catch program bugs */ fs->fs_rwbuffer = (char *) 0xdeadbeef; fs->fs_workbuffer = (char *) 0xdeadbeef; } /* Now removed ourselves from the linked list */ if (fs == g_mounthead) { /* We were the first ones. Set a new head */ g_mounthead = fs->fs_next; } else { /* Remove from the middle of the list somewhere */ prevfs->fs_next = fs->fs_next; } #else if (fs->fs_blkdriver) { inode = fs->fs_blkdriver; if (inode) { if (inode->u.i_bops && inode->u.i_bops->close) { inode->u.i_bops->close(inode); } } } /* Release the mountpoint private data */ kmm_free(fs->fs_rwbuffer); kmm_free(fs->fs_workbuffer); #endif return ret; } /**************************************************************************** * Name: smartfs_finddirentry * * Description: Finds an entry in the filesystem as specified by relpath. * If found, the direntry will be populated with information * for accessing the entry. * * If the final directory segment of relpath just before the * last segment (the target file/dir) is valid, then the * parentdirsector will indicate the logical sector number of * the parent directory where a new entry should be created, * and the filename pointer will point to the final segment * (i.e. the "filename"). * ****************************************************************************/ int smartfs_finddirentry(struct smartfs_mountpt_s *fs, struct smartfs_entry_s *direntry, const char *relpath, uint16_t *parentdirsector, const char **filename) { int ret = -ENOENT; const char *segment; const char *ptr; uint16_t seglen; uint16_t depth = 0; uint16_t dirstack[CONFIG_SMARTFS_DIRDEPTH]; uint16_t dirsector; uint16_t entrysize; uint16_t offset; struct smartfs_chain_header_s *header; struct smart_read_write_s readwrite; struct smartfs_entry_header_s *entry; /* Set the initial value of the output */ *parentdirsector = 0xffff; *filename = NULL; /* Initialize directory level zero as the root sector */ dirstack[0] = fs->fs_rootsector; entrysize = sizeof(struct smartfs_entry_header_s) + fs->fs_llformat.namesize; /* Test if this is a request for the root directory */ if (*relpath == '\0') { direntry->firstsector = fs->fs_rootsector; direntry->flags = SMARTFS_DIRENT_TYPE_DIR | 0777; direntry->utc = 0; direntry->dsector = 0; direntry->doffset = 0; direntry->dfirst = fs->fs_rootsector; direntry->name = NULL; direntry->datlen = 0; *parentdirsector = 0; /* Our parent is the format sector I guess */ return OK; } /* Parse through each segment of relpath */ segment = relpath; while (segment != NULL && *segment != '\0') { /* Find the end of this segment. It will be '/' or NULL. */ ptr = segment; seglen = 0; while (*ptr != '/' && *ptr != '\0') { seglen++; ptr++; } /* Check to avoid buffer overflow */ if (seglen >= WORKBUFFER_SIZE) { ret = -ENAMETOOLONG; goto errout; } strncpy(fs->fs_workbuffer, segment, seglen); fs->fs_workbuffer[seglen] = '\0'; /* Search for "." and ".." as segment names */ if (strcmp(fs->fs_workbuffer, ".") == 0) { /* Just ignore this segment. Advance ptr if not on NULL */ if (*ptr == '/') { ptr++; } segment = ptr; continue; } else if (strcmp(fs->fs_workbuffer, "..") == 0) { /* Up one level */ if (depth == 0) { /* We went up one level past our mount point! */ goto errout; } /* "Pop" to the previous directory level */ depth--; if (*ptr == '/') { ptr++; } segment = ptr; continue; } else { /* Search for the entry in the current directory */ dirsector = dirstack[depth]; /* Read the directory */ offset = 0xffff; #if CONFIG_SMARTFS_ERASEDSTATE == 0xff while (dirsector != 0xffff) #else while (dirsector != 0) #endif { /* Read the next directory in the chain */ readwrite.logsector = dirsector; readwrite.count = fs->fs_llformat.availbytes; readwrite.buffer = (uint8_t *)fs->fs_rwbuffer; readwrite.offset = 0; ret = FS_IOCTL(fs, BIOC_READSECT, (unsigned long) &readwrite); if (ret < 0) { goto errout; } /* Point to next sector in chain */ header = (struct smartfs_chain_header_s *) fs->fs_rwbuffer; dirsector = SMARTFS_NEXTSECTOR(header); /* Search for the entry */ offset = sizeof(struct smartfs_chain_header_s); entry = (struct smartfs_entry_header_s *) &fs->fs_rwbuffer[offset]; while (offset < readwrite.count) { /* Test if this entry is valid and active */ #ifdef CONFIG_SMARTFS_ALIGNED_ACCESS if (((smartfs_rdle16(&entry->flags) & SMARTFS_DIRENT_EMPTY) == (SMARTFS_ERASEDSTATE_16BIT & SMARTFS_DIRENT_EMPTY)) || ((smartfs_rdle16(&entry->flags) & SMARTFS_DIRENT_ACTIVE) != (SMARTFS_ERASEDSTATE_16BIT & SMARTFS_DIRENT_ACTIVE))) #else if (((entry->flags & SMARTFS_DIRENT_EMPTY) == (SMARTFS_ERASEDSTATE_16BIT & SMARTFS_DIRENT_EMPTY)) || ((entry->flags & SMARTFS_DIRENT_ACTIVE) != (SMARTFS_ERASEDSTATE_16BIT & SMARTFS_DIRENT_ACTIVE))) #endif { /* This entry isn't valid, skip it */ offset += entrysize; entry = (struct smartfs_entry_header_s *) &fs->fs_rwbuffer[offset]; continue; } /* Test if the name matches */ if (strncmp(entry->name, fs->fs_workbuffer, fs->fs_llformat.namesize) == 0) { /* We found it! If this is the last segment entry, * then report the entry. If it isn't the last * entry, then validate it is a directory entry and * open it and continue searching. */ if (*ptr == '\0') { /* We are at the last segment. Report the entry */ /* Fill in the entry */ #ifdef CONFIG_SMARTFS_ALIGNED_ACCESS direntry->firstsector = smartfs_rdle16(&entry->firstsector); direntry->flags = smartfs_rdle16(&entry->flags); direntry->utc = smartfs_rdle32(&entry->utc); #else direntry->firstsector = entry->firstsector; direntry->flags = entry->flags; direntry->utc = entry->utc; #endif direntry->dsector = readwrite.logsector; direntry->doffset = offset; direntry->dfirst = dirstack[depth]; if (direntry->name == NULL) { direntry->name = (FAR char *) kmm_malloc(fs->fs_llformat.namesize + 1); } memset(direntry->name, 0, fs->fs_llformat.namesize + 1); strncpy(direntry->name, entry->name, fs->fs_llformat.namesize); direntry->datlen = 0; /* Scan the file's sectors to calculate the length and * perform a rudimentary check. */ #ifdef CONFIG_SMARTFS_ALIGNED_ACCESS if ((smartfs_rdle16(&entry->flags) & SMARTFS_DIRENT_TYPE) == SMARTFS_DIRENT_TYPE_FILE) { dirsector = smartfs_rdle16(&entry->firstsector); #else if ((entry->flags & SMARTFS_DIRENT_TYPE) == SMARTFS_DIRENT_TYPE_FILE) { dirsector = entry->firstsector; #endif readwrite.count = sizeof(struct smartfs_chain_header_s); readwrite.buffer = (uint8_t *)fs->fs_rwbuffer; readwrite.offset = 0; while (dirsector != SMARTFS_ERASEDSTATE_16BIT) { /* Read the next sector of the file */ readwrite.logsector = dirsector; ret = FS_IOCTL(fs, BIOC_READSECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error in sector chain at %d!\n", dirsector); break; } /* Add used bytes to the total and point to next sector */ if (*((FAR uint16_t *)header->used) != SMARTFS_ERASEDSTATE_16BIT) { direntry->datlen += *((uint16_t *)header->used); } dirsector = SMARTFS_NEXTSECTOR(header); } } *parentdirsector = dirstack[depth]; *filename = segment; ret = OK; goto errout; } else { /* Validate it's a directory */ #ifdef CONFIG_SMARTFS_ALIGNED_ACCESS if ((smartfs_rdle16(&entry->flags) & SMARTFS_DIRENT_TYPE) != SMARTFS_DIRENT_TYPE_DIR) #else if ((entry->flags & SMARTFS_DIRENT_TYPE) != SMARTFS_DIRENT_TYPE_DIR) #endif { /* Not a directory! Report the error */ ret = -ENOTDIR; goto errout; } /* "Push" the directory and continue searching */ if (depth >= CONFIG_SMARTFS_DIRDEPTH - 1) { /* Directory depth too big */ ret = -ENAMETOOLONG; goto errout; } #ifdef CONFIG_SMARTFS_ALIGNED_ACCESS dirstack[++depth] = smartfs_rdle16(&entry->firstsector); #else dirstack[++depth] = entry->firstsector; #endif segment = ptr + 1; break; } } /* Not this entry. Skip to the next one */ offset += entrysize; entry = (struct smartfs_entry_header_s *) &fs->fs_rwbuffer[offset]; } /* Test if a directory entry was found and break if it was */ if (offset < readwrite.count) { break; } } /* If we found a dir entry, then continue searching */ if (offset < readwrite.count) { /* Update the segment pointer */ if (*ptr != '\0') { ptr++; } segment = ptr; continue; } /* Entry not found! Report the error. Also, if this is the last * segment, then report the parent directory sector. */ if (*ptr == '\0') { *parentdirsector = dirstack[depth]; *filename = segment; } else { *parentdirsector = 0xffff; *filename = NULL; } ret = -ENOENT; goto errout; } } errout: return ret; } /**************************************************************************** * Name: smartfs_createentry * * Description: Creates a new entry in the specified parent directory, using * the specified type and name. If the given sectorno is * 0xffff, then a new sector is allocated for the new entry, * otherwise the supplied sectorno is used. * ****************************************************************************/ int smartfs_createentry(FAR struct smartfs_mountpt_s *fs, uint16_t parentdirsector, FAR const char *filename, uint16_t type, mode_t mode, FAR struct smartfs_entry_s *direntry, uint16_t sectorno, FAR struct smartfs_ofile_s *sf) { struct smart_read_write_s readwrite; int ret; uint16_t psector; uint16_t nextsector; uint16_t offset; uint16_t found; uint16_t entrysize; struct smartfs_entry_header_s *entry; struct smartfs_chain_header_s *chainheader; int update_chain = 0; struct smart_read_write_s update_readwrite; struct smartfs_chain_header_s update_header; /* Start at the 1st sector in the parent directory */ psector = parentdirsector; found = FALSE; entrysize = sizeof(struct smartfs_entry_header_s) + fs->fs_llformat.namesize; /* Validate the name isn't too long */ if (strlen(filename) > fs->fs_llformat.namesize) { return -ENAMETOOLONG; } /* Read the parent directory sector and find a place to insert * the new entry. */ while (1) { /* Read the next sector */ readwrite.logsector = psector; readwrite.count = fs->fs_llformat.availbytes; readwrite.offset = 0; readwrite.buffer = (uint8_t *) fs->fs_rwbuffer; ret = FS_IOCTL(fs, BIOC_READSECT, (unsigned long) &readwrite); if (ret < 0) { goto errout; } /* Get the next chained sector */ chainheader = (struct smartfs_chain_header_s *) fs->fs_rwbuffer; nextsector = SMARTFS_NEXTSECTOR(chainheader); /* Search for an empty entry in this sector */ offset = sizeof(struct smartfs_chain_header_s); entry = (struct smartfs_entry_header_s *) &fs->fs_rwbuffer[offset]; while (offset + entrysize < readwrite.count) { /* Check if this entry is available */ #ifdef CONFIG_SMARTFS_ALIGNED_ACCESS if ((smartfs_rdle16(&entry->flags) == SMARTFS_ERASEDSTATE_16BIT) || ((smartfs_rdle16(&entry->flags) & #else if ((entry->flags == SMARTFS_ERASEDSTATE_16BIT) || ((entry->flags & #endif (SMARTFS_DIRENT_EMPTY | SMARTFS_DIRENT_ACTIVE)) == (~SMARTFS_ERASEDSTATE_16BIT & (SMARTFS_DIRENT_EMPTY | SMARTFS_DIRENT_ACTIVE)))) { /* We found an empty entry. Use it. */ found = TRUE; break; } /* Not available. Skip to next entry */ offset += entrysize; entry = (struct smartfs_entry_header_s *) &fs->fs_rwbuffer[offset]; } /* If we found an entry, stop the search */ if (found) { break; } /* If there are no more sectors, then we need to add one to make * room for the new entry. */ if (nextsector == SMARTFS_ERASEDSTATE_16BIT) { /* Allocate a new sector and chain it to the last one */ ret = FS_IOCTL(fs, BIOC_ALLOCSECT, 0xffff); if (ret < 0) { goto errout; } nextsector = (uint16_t) ret; /* Chain the next sector into this sector. */ *((uint16_t *)update_header.nextsector) = nextsector; update_readwrite.logsector = psector; update_readwrite.offset = offsetof(struct smartfs_chain_header_s, nextsector); update_readwrite.count = sizeof(uint16_t); update_readwrite.buffer = update_header.nextsector; update_chain = 1; } /* Now update to the next sector */ psector = nextsector; } /* We found an insertion point. Create the entry at sector,offset */ #if CONFIG_SMARTFS_ERASEDSTATE == 0xff #ifdef CONFIG_SMARTFS_ALIGNED_ACCESS smartfs_wrle16(&entry->flags, (uint16_t) (SMARTFS_DIRENT_ACTIVE | SMARTFS_DIRENT_DELETING | SMARTFS_DIRENT_RESERVED | type | (mode & SMARTFS_DIRENT_MODE))); #else entry->flags = (uint16_t) (SMARTFS_DIRENT_ACTIVE | SMARTFS_DIRENT_DELETING | SMARTFS_DIRENT_RESERVED | type | (mode & SMARTFS_DIRENT_MODE)); #endif #else /* CONFIG_SMARTFS_ERASEDSTATE == 0xff */ #ifdef CONFIG_SMARTFS_ALIGNED_ACCESS smartfs_wrle16(&entry->flags, (uint16_t) (SMARTFS_DIRENT_EMPTY | type | (mode & SMARTFS_DIRENT_MODE))); #else entry->flags = (uint16_t) (SMARTFS_DIRENT_EMPTY | type | (mode & SMARTFS_DIRENT_MODE)); #endif #endif /* CONFIG_SMARTFS_ERASEDSTATE == 0xff */ if (sectorno == 0xffff) { /* Allocate a new sector for the file / dir */ ret = FS_IOCTL(fs, BIOC_ALLOCSECT, 0xffff); if (ret < 0) { goto errout; } nextsector = (uint16_t) ret; /* Set the newly allocated sector's type (file or dir) */ #ifdef CONFIG_SMARTFS_USE_SECTOR_BUFFER if (sf) { /* Using sector buffer and we have an open file context. Just update * the sector buffer in the open file context. */ memset(sf->buffer, CONFIG_SMARTFS_ERASEDSTATE, fs->fs_llformat.availbytes); chainheader = (struct smartfs_chain_header_s *) sf->buffer; chainheader->type = SMARTFS_SECTOR_TYPE_FILE; sf->bflags = SMARTFS_BFLAG_DIRTY | SMARTFS_BFLAG_NEWALLOC; } else #endif { if ((type & SMARTFS_DIRENT_TYPE) == SMARTFS_DIRENT_TYPE_DIR) { chainheader->type = SMARTFS_SECTOR_TYPE_DIR; } else { chainheader->type = SMARTFS_SECTOR_TYPE_FILE; } readwrite.count = 1; readwrite.offset = offsetof(struct smartfs_chain_header_s, type); readwrite.buffer = (uint8_t *) &chainheader->type; readwrite.logsector = nextsector; ret = FS_IOCTL(fs, BIOC_WRITESECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error %d setting new sector type for sector %d\n", ret, nextsector); goto errout; } } } else { /* Use the provided sector number */ nextsector = sectorno; } /* Create the directory entry to be written in the parent's sector */ #ifdef CONFIG_SMARTFS_ALIGNED_ACCESS smartfs_wrle16(&entry->firstsector, nextsector); smartfs_wrle16(&entry->utc, time(NULL)); #else entry->firstsector = nextsector; entry->utc = time(NULL); #endif memset(entry->name, 0, fs->fs_llformat.namesize); strncpy(entry->name, filename, fs->fs_llformat.namesize); /* Now write the new entry to the parent directory sector */ readwrite.logsector = psector; readwrite.offset = offset; readwrite.count = entrysize; readwrite.buffer = (uint8_t *) &fs->fs_rwbuffer[offset]; ret = FS_IOCTL(fs, BIOC_WRITESECT, (unsigned long) &readwrite); if (ret < 0) { goto errout; } if (update_chain) { /* Update chain header after the next sector was written */ ret = FS_IOCTL(fs, BIOC_WRITESECT, (unsigned long) &update_readwrite); if (ret < 0) { ferr("ERROR: Error chaining sector %d\n", update_readwrite.logsector); goto errout; } } /* Now fill in the entry */ direntry->firstsector = nextsector; direntry->dsector = psector; direntry->doffset = offset; #ifdef CONFIG_SMARTFS_ALIGNED_ACCESS direntry->flags = smartfs_rdle16(&entry->flags); direntry->utc = smartfs_rdle32(&entry->utc); #else direntry->flags = entry->flags; direntry->utc = entry->utc; #endif direntry->datlen = 0; if (direntry->name == NULL) { direntry->name = (FAR char *)kmm_malloc(fs->fs_llformat.namesize + 1); } memset(direntry->name, 0, fs->fs_llformat.namesize + 1); strncpy(direntry->name, filename, fs->fs_llformat.namesize); ret = OK; errout: return ret; } /**************************************************************************** * Name: smartfs_deleteentry * * Description: Deletes an entry from the filesystem (file or dir) by * freeing all the entry's sectors and then marking it inactive * in it's parent's directory sector. For a directory, it * does not validate the directory is empty, nor does it do * a recursive delete. * ****************************************************************************/ int smartfs_deleteentry(struct smartfs_mountpt_s *fs, struct smartfs_entry_s *entry) { int ret; uint16_t nextsector; uint16_t sector; uint16_t count; uint16_t entrysize; uint16_t offset; struct smartfs_entry_header_s *direntry; struct smartfs_chain_header_s *header; struct smart_read_write_s readwrite; /* Okay, delete the file. Loop through each sector and release them * * TODO: We really should walk the list backward to avoid lost * sectors in the event we lose power. However this requires * allocating a buffer to build the sector list since we don't * store a doubly-linked list of sectors on the device. We * could test if the sector data buffer is big enough and * just use that, and only allocate a new buffer if the * sector buffer isn't big enough. Do do this, however, we * need to change the code below as it is using the a few * bytes of the buffer to read in header info. */ nextsector = entry->firstsector; header = (struct smartfs_chain_header_s *) fs->fs_rwbuffer; readwrite.offset = 0; readwrite.count = sizeof(struct smartfs_chain_header_s); readwrite.buffer = (uint8_t *) fs->fs_rwbuffer; while (nextsector != SMARTFS_ERASEDSTATE_16BIT) { /* Read the next sector into our buffer */ sector = nextsector; readwrite.logsector = sector; ret = FS_IOCTL(fs, BIOC_READSECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error reading sector %d\n", nextsector); break; } /* Release this sector */ nextsector = SMARTFS_NEXTSECTOR(header); ret = FS_IOCTL(fs, BIOC_FREESECT, sector); } /* Remove the entry from the directory tree */ readwrite.logsector = entry->dsector; readwrite.offset = 0; readwrite.count = fs->fs_llformat.availbytes; readwrite.buffer = (uint8_t *) fs->fs_rwbuffer; ret = FS_IOCTL(fs, BIOC_READSECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error reading directory info at sector %d\n", entry->dsector); goto errout; } /* Mark this entry as inactive */ direntry = (struct smartfs_entry_header_s *) &fs->fs_rwbuffer[entry->doffset]; #if CONFIG_SMARTFS_ERASEDSTATE == 0xff #ifdef CONFIG_SMARTFS_ALIGNED_ACCESS smartfs_wrle16(&direntry->flags, smartfs_rdle16(&direntry->flags) & ~SMARTFS_DIRENT_ACTIVE); #else direntry->flags &= ~SMARTFS_DIRENT_ACTIVE; #endif #else /* CONFIG_SMARTFS_ERASEDSTATE == 0xff */ #ifdef CONFIG_SMARTFS_ALIGNED_ACCESS smartfs_wrle16(&direntry->flags, smartfs_rdle16(&direntry->flags) | SMARTFS_DIRENT_ACTIVE); #else direntry->flags |= SMARTFS_DIRENT_ACTIVE; #endif #endif /* CONFIG_SMARTFS_ERASEDSTATE == 0xff */ /* Write the updated flags back to the sector */ readwrite.offset = entry->doffset; readwrite.count = sizeof(uint16_t); readwrite.buffer = (uint8_t *) &direntry->flags; ret = FS_IOCTL(fs, BIOC_WRITESECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error marking entry inactive at sector %d\n", entry->dsector); goto errout; } /* Test if any entries in this sector are being used */ if ((entry->dsector != fs->fs_rootsector) && (entry->dsector != entry->dfirst)) { /* Scan the sector and count used entries */ count = 0; offset = sizeof(struct smartfs_chain_header_s); entrysize = sizeof(struct smartfs_entry_header_s) + fs->fs_llformat.namesize; while (offset + entrysize < fs->fs_llformat.availbytes) { /* Test the next entry */ direntry = (struct smartfs_entry_header_s *) &fs->fs_rwbuffer[offset]; #ifdef CONFIG_SMARTFS_ALIGNED_ACCESS if (((smartfs_rdle16(&direntry->flags) & SMARTFS_DIRENT_EMPTY) != (SMARTFS_ERASEDSTATE_16BIT & SMARTFS_DIRENT_EMPTY)) && ((smartfs_rdle16(&direntry->flags) & SMARTFS_DIRENT_ACTIVE) == (SMARTFS_ERASEDSTATE_16BIT & SMARTFS_DIRENT_ACTIVE))) #else if (((direntry->flags & SMARTFS_DIRENT_EMPTY) != (SMARTFS_ERASEDSTATE_16BIT & SMARTFS_DIRENT_EMPTY)) && ((direntry->flags & SMARTFS_DIRENT_ACTIVE) == (SMARTFS_ERASEDSTATE_16BIT & SMARTFS_DIRENT_ACTIVE))) #endif { /* Count this entry */ count++; } /* Advance to next entry */ offset += entrysize; } /* Test if the count it zero. If it is, then we will release the sector */ if (count == 0) { /* Okay, to release the sector, we must find the sector that we * are chained to and remove ourselves from the chain. First * save our nextsector value so we can "unchain" ourselves. */ nextsector = SMARTFS_NEXTSECTOR(header); /* Now loop through the dir sectors to find ourselves in the chain */ sector = entry->dfirst; readwrite.offset = 0; readwrite.count = sizeof(struct smartfs_chain_header_s); readwrite.buffer = (uint8_t *) fs->fs_rwbuffer; while (sector != SMARTFS_ERASEDSTATE_16BIT) { /* Read the header for the next sector */ readwrite.logsector = sector; ret = FS_IOCTL(fs, BIOC_READSECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error reading sector %d\n", nextsector); break; } /* Test if this sector "points" to us */ if (SMARTFS_NEXTSECTOR(header) == entry->dsector) { /* We found ourselves in the chain. Update the chain. */ SMARTFS_NEXTSECTOR(header) = nextsector; readwrite.offset = offsetof(struct smartfs_chain_header_s, nextsector); readwrite.count = sizeof(uint16_t); readwrite.buffer = header->nextsector; ret = FS_IOCTL(fs, BIOC_WRITESECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error unchaining sector (%d)\n", nextsector); goto errout; } /* Now release our sector */ ret = FS_IOCTL(fs, BIOC_FREESECT, (unsigned long) entry->dsector); if (ret < 0) { ferr("ERROR: Error freeing sector %d\n", entry->dsector); goto errout; } /* Break out of the loop, we are done! */ break; } /* Chain to the next sector */ sector = SMARTFS_NEXTSECTOR(header); } } } ret = OK; errout: return ret; } /**************************************************************************** * Name: smartfs_countdirentries * * Description: Counts the number of items in the specified directory entry. * This routine assumes you have validated the entry you are * passing is in fact a directory sector, though it checks * just in case you were stupid :-) * ****************************************************************************/ int smartfs_countdirentries(struct smartfs_mountpt_s *fs, struct smartfs_entry_s *entry) { int ret; uint16_t nextsector; uint16_t offset; uint16_t entrysize; int count; struct smartfs_entry_header_s *direntry; struct smartfs_chain_header_s *header; struct smart_read_write_s readwrite; /* Walk through the directory's sectors and count entries */ count = 0; nextsector = entry->firstsector; while (nextsector != SMARTFS_ERASEDSTATE_16BIT) { /* Read the next sector into our buffer */ readwrite.logsector = nextsector; readwrite.offset = 0; readwrite.count = fs->fs_llformat.availbytes; readwrite.buffer = (uint8_t *) fs->fs_rwbuffer; ret = FS_IOCTL(fs, BIOC_READSECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error reading sector %d\n", nextsector); break; } /* Validate this is a directory type sector */ header = (struct smartfs_chain_header_s *) fs->fs_rwbuffer; if (header->type != SMARTFS_SECTOR_TYPE_DIR) { ferr("ERROR: Sector %d is not a DIR sector!\n", nextsector); goto errout; } /* Loop for all entries in this sector and count them */ offset = sizeof(struct smartfs_chain_header_s); entrysize = sizeof(struct smartfs_entry_header_s) + fs->fs_llformat.namesize; direntry = (struct smartfs_entry_header_s *) &fs->fs_rwbuffer[offset]; while (offset + entrysize < readwrite.count) { #ifdef CONFIG_SMARTFS_ALIGNED_ACCESS if (((smartfs_rdle16(&direntry->flags) & SMARTFS_DIRENT_EMPTY) != (SMARTFS_ERASEDSTATE_16BIT & SMARTFS_DIRENT_EMPTY)) && ((smartfs_rdle16(&direntry->flags) & SMARTFS_DIRENT_ACTIVE) == (SMARTFS_ERASEDSTATE_16BIT & SMARTFS_DIRENT_ACTIVE))) #else if (((direntry->flags & SMARTFS_DIRENT_EMPTY) != (SMARTFS_ERASEDSTATE_16BIT & SMARTFS_DIRENT_EMPTY)) && ((direntry->flags & SMARTFS_DIRENT_ACTIVE) == (SMARTFS_ERASEDSTATE_16BIT & SMARTFS_DIRENT_ACTIVE))) #endif { /* Count this entry */ count++; } offset += entrysize; direntry = (struct smartfs_entry_header_s *) &fs->fs_rwbuffer[offset]; } /* Get the next sector from the header */ nextsector = SMARTFS_NEXTSECTOR(header); } ret = count; errout: return ret; } /**************************************************************************** * Name: smartfs_sync_internal * * Description: * Synchronize the file state on disk to match internal, in-memory state. * ****************************************************************************/ int smartfs_sync_internal(FAR struct smartfs_mountpt_s *fs, FAR struct smartfs_ofile_s *sf) { FAR struct smartfs_chain_header_s *header; struct smart_read_write_s readwrite; int ret = OK; #ifdef CONFIG_SMARTFS_USE_SECTOR_BUFFER if (sf->bflags & SMARTFS_BFLAG_DIRTY) { /* Update the header with the number of bytes written */ header = (struct smartfs_chain_header_s *)sf->buffer; if (*((uint16_t *)header->used) == SMARTFS_ERASEDSTATE_16BIT) { *((uint16_t *)header->used) = sf->byteswritten; } else { *((uint16_t *)header->used) += sf->byteswritten; } /* Write the entire sector to FLASH */ readwrite.logsector = sf->currsector; readwrite.offset = 0; readwrite.count = fs->fs_llformat.availbytes; readwrite.buffer = sf->buffer; ret = FS_IOCTL(fs, BIOC_WRITESECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error %d writing used bytes for sector %d\n", ret, sf->currsector); goto errout; } sf->byteswritten = 0; sf->bflags = 0; } #else /* CONFIG_SMARTFS_USE_SECTOR_BUFFER */ /* Test if we have written bytes to the current sector that * need to be recorded in the chain header's used bytes field. */ if (sf->byteswritten > 0) { finfo("Syncing sector %d\n", sf->currsector); /* Read the existing sector used bytes value */ readwrite.logsector = sf->currsector; readwrite.offset = 0; readwrite.buffer = (uint8_t *) fs->fs_rwbuffer; readwrite.count = sizeof(struct smartfs_chain_header_s); ret = FS_IOCTL(fs, BIOC_READSECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error %d reading sector %d data\n", ret, sf->currsector); goto errout; } /* Add new byteswritten to existing value */ header = (struct smartfs_chain_header_s *) fs->fs_rwbuffer; if (*((uint16_t *) header->used) == SMARTFS_ERASEDSTATE_16BIT) { *((uint16_t *) header->used) = sf->byteswritten; } else { *((uint16_t *) header->used) += sf->byteswritten; } readwrite.offset = offsetof(struct smartfs_chain_header_s, used); readwrite.count = sizeof(uint16_t); readwrite.buffer = (uint8_t *) &fs->fs_rwbuffer[readwrite.offset]; ret = FS_IOCTL(fs, BIOC_WRITESECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error %d writing used bytes for sector %d\n", ret, sf->currsector); goto errout; } sf->byteswritten = 0; } #endif /* CONFIG_SMARTFS_USE_SECTOR_BUFFER */ errout: return ret; } /**************************************************************************** * Name: smartfs_seek_internal * * Description: * Performs the logic of the seek function. This is an internal function * because it does not provide semaphore protection and therefore must be * called from one of the other public interface routines (open, seek, * etc.). * ****************************************************************************/ off_t smartfs_seek_internal(FAR struct smartfs_mountpt_s *fs, FAR struct smartfs_ofile_s *sf, off_t offset, int whence) { FAR struct smartfs_chain_header_s *header; struct smart_read_write_s readwrite; off_t newpos; off_t sectorstartpos; int ret; /* Test if this is a seek to get the current file pos */ if ((whence == SEEK_CUR) && (offset == 0)) { return sf->filepos; } /* Test if we need to sync the file */ if (sf->byteswritten > 0) { /* Perform a sync */ smartfs_sync_internal(fs, sf); } /* Calculate the file position to seek to based on current position */ switch (whence) { case SEEK_SET: default: newpos = offset; break; case SEEK_CUR: newpos = sf->filepos + offset; break; case SEEK_END: newpos = sf->entry.datlen + offset; break; } /* Ensure newpos is in range */ if (newpos < 0) { newpos = 0; } if (newpos > sf->entry.datlen) { newpos = sf->entry.datlen; } /* Now perform the seek. Test if we are seeking within the current * sector and can skip the search to save time. */ sectorstartpos = sf->filepos - (sf->curroffset - sizeof(struct smartfs_chain_header_s)); if (newpos >= sectorstartpos && newpos < sectorstartpos + fs->fs_llformat.availbytes - sizeof(struct smartfs_chain_header_s)) { /* Seeking within the current sector. Just update the offset */ sf->curroffset = sizeof(struct smartfs_chain_header_s) + newpos - sectorstartpos; sf->filepos = newpos; return newpos; } /* Nope, we have to search for the sector and offset. If the new pos is greater * than the current pos, then we can start from the beginning of the current * sector, otherwise we have to start from the beginning of the file. */ if (newpos > sf->filepos) { sf->filepos = sectorstartpos; } else { sf->currsector = sf->entry.firstsector; sf->filepos = 0; } header = (struct smartfs_chain_header_s *) fs->fs_rwbuffer; while ((sf->currsector != SMARTFS_ERASEDSTATE_16BIT) && (sf->filepos + fs->fs_llformat.availbytes - sizeof(struct smartfs_chain_header_s) < newpos)) { /* Read the sector's header */ readwrite.logsector = sf->currsector; readwrite.offset = 0; readwrite.count = sizeof(struct smartfs_chain_header_s); readwrite.buffer = (uint8_t *) fs->fs_rwbuffer; ret = FS_IOCTL(fs, BIOC_READSECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error %d reading sector %d header\n", ret, sf->currsector); goto errout; } /* Point to next sector and update filepos */ sf->currsector = SMARTFS_NEXTSECTOR(header); sf->filepos += SMARTFS_USED(header); } #ifdef CONFIG_SMARTFS_USE_SECTOR_BUFFER /* When using sector buffering, we must read in the last buffer to our * sf->buffer in case any changes are made. */ if (sf->currsector != SMARTFS_ERASEDSTATE_16BIT) { readwrite.logsector = sf->currsector; readwrite.offset = 0; readwrite.count = fs->fs_llformat.availbytes; readwrite.buffer = (uint8_t *) sf->buffer; ret = FS_IOCTL(fs, BIOC_READSECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error %d reading sector %d header\n", ret, sf->currsector); goto errout; } } #endif /* Now calculate the offset */ sf->curroffset = sizeof(struct smartfs_chain_header_s) + newpos - sf->filepos; sf->filepos = newpos; return newpos; errout: return ret; } /**************************************************************************** * Name: smartfs_shrinkfile * * Description: * Shrink the size of an existing file to the specified length * ****************************************************************************/ int smartfs_shrinkfile(FAR struct smartfs_mountpt_s *fs, FAR struct smartfs_ofile_s *sf, off_t length) { FAR struct smartfs_chain_header_s *header; FAR struct smartfs_entry_s *entry; FAR uint8_t *dest; struct smart_read_write_s readwrite; uint16_t nextsector; uint16_t sector; off_t remaining; off_t destsize; off_t available; off_t offset; int ret; /* Walk through the directory's sectors and count entries */ entry = &sf->entry; nextsector = entry->firstsector; header = (struct smartfs_chain_header_s *)fs->fs_rwbuffer; remaining = length; available = fs->fs_llformat.availbytes - sizeof(struct smartfs_chain_header_s); while (nextsector != SMARTFS_ERASEDSTATE_16BIT) { /* Read the next sector into our buffer */ readwrite.logsector = nextsector; readwrite.offset = 0; readwrite.count = fs->fs_llformat.availbytes; readwrite.buffer = (FAR uint8_t *)fs->fs_rwbuffer; ret = FS_IOCTL(fs, BIOC_READSECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error reading sector %d header\n", nextsector); return ret; } /* Get the next chained sector */ sector = SMARTFS_NEXTSECTOR(header); #ifdef CONFIG_SMARTFS_USE_SECTOR_BUFFER /* When we have a sector buffer in use, simply skip the first sector. * It will be handled below. */ if (nextsector == entry->firstsector) { if (remaining > available) { remaining -= available; } else { remaining = 0; } } else #endif /* Are we retaining the sector it its entirety? */ if (remaining >= available) { /* Yes... skip to the next sector */ remaining -= available; } /* Are we removing the sector it its entirety? */ else if (remaining <= 0 && nextsector != entry->firstsector) { /* Yes.. just release the sector */ ret = FS_IOCTL(fs, BIOC_FREESECT, (unsigned long)nextsector); if (ret < 0) { ferr("ERROR: Error freeing sector %d\n", nextsector); return ret; } } else { /* No.. Fill our buffer with erased data, retaining any still- * valid bytes at the beginning of the buffer. * * Because of the preceding tests we know that * 0 <= remaining < available. A special case is remaining == 0 * and nextsector == firstsector. In that case, we need to * overwrite the sector data with the erased state value. The * underlying SMART block driver will detect this and release the * old sector and create a new one with the new (blank) data. * * Otherwise, we need to preserve the header and overwrite some of * the data. */ if (remaining == 0) { dest = (FAR uint8_t *)fs->fs_rwbuffer; destsize = fs->fs_llformat.availbytes; } else { offset = sizeof(struct smartfs_chain_header_s) + remaining; dest = (FAR uint8_t *)&fs->fs_rwbuffer[offset]; destsize = fs->fs_llformat.availbytes - offset; *((uint16_t *)header->used) = remaining; *((uint16_t *)header->nextsector) = SMARTFS_ERASEDSTATE_16BIT; remaining = 0; } memset(dest, CONFIG_SMARTFS_ERASEDSTATE, destsize); header->type = SMARTFS_SECTOR_TYPE_FILE; /* Now write the new sector data */ readwrite.count = fs->fs_llformat.availbytes; ret = FS_IOCTL(fs, BIOC_WRITESECT, (unsigned long)&readwrite); if (ret < 0) { ferr("ERROR: Error blanking 1st sector (%d) of file\n", nextsector); return ret; } } /* Now move on to the next sector */ nextsector = sector; } #ifdef CONFIG_SMARTFS_USE_SECTOR_BUFFER /* Now deal with the first sector in the event we are using a sector buffer * like we would be if CRC is enabled. * * Using sector buffer and we have an open file context. Just update the * sector buffer in the open file context. */ if (length < fs->fs_llformat.availbytes) { /* Read the entire sector */ readwrite.logsector = entry->firstsector; readwrite.offset = 0; readwrite.count = fs->fs_llformat.availbytes; readwrite.buffer = (uint8_t *)sf->buffer; ret = FS_IOCTL(fs, BIOC_READSECT, (unsigned long)&readwrite); if (ret < 0) { return ret; } /* Retain any valid data at the beginning of the sector, including the * header. Special case length == 0 */ if (length == 0) { dest = (FAR uint8_t *)sf->buffer; destsize = fs->fs_llformat.availbytes; } else { offset = sizeof(struct smartfs_chain_header_s) + length; dest = (FAR uint8_t *)&sf->buffer[offset]; destsize = fs->fs_llformat.availbytes - offset; header = (struct smartfs_chain_header_s *)sf->buffer; *((uint16_t *)header->used) = length; *((uint16_t *)header->nextsector) = SMARTFS_ERASEDSTATE_16BIT; } memset(dest, CONFIG_SMARTFS_ERASEDSTATE, destsize); header = (struct smartfs_chain_header_s *)sf->buffer; header->type = SMARTFS_SECTOR_TYPE_FILE; sf->bflags = SMARTFS_BFLAG_DIRTY; } #endif entry->datlen = length; return OK; } /**************************************************************************** * Name: smartfs_extendfile * * Description: * Zero-extend the length of a regular file to 'length'. * ****************************************************************************/ int smartfs_extendfile(FAR struct smartfs_mountpt_s *fs, FAR struct smartfs_ofile_s *sf, off_t length) { struct smart_read_write_s readwrite; FAR struct smartfs_chain_header_s *header; #ifndef CONFIG_SMARTFS_USE_SECTOR_BUFFER FAR uint8_t *buffer; #endif off_t remaining; off_t savepos; off_t oldsize; int ret; /* We are zero-extending the file. This is essentially the same as a * write except that (1) we write zeros and (2) we don't update the file * position. */ #ifndef CONFIG_SMARTFS_USE_SECTOR_BUFFER /* In order to perform the writes we will have to have a sector buffer. If * SmartFS is not configured with a sector buffer then we will, then we * will, unfortunately, need to allocate one. */ buffer = (FAR uint8_t *)kmm_malloc(SMARTFS_TRUNCBUFFER_SIZE); if (buffer == NULL) { return -ENOMEM; } #endif /* Loop until either (1) the file has been fully extended with zeroed data * or (2) an error occurs. We assume we start with the current sector in * cache (ff_currentsector). */ oldsize = sf->entry.datlen; remaining = length - oldsize; DEBUGASSERT(length > oldsize); /* Seek to the end of the file for the append/write operation, remembering * the current file position. It will be restored before returning; the * truncate operation must not alter the file position. */ savepos = sf->filepos; smartfs_seek_internal(fs, sf, 0, SEEK_END); while (remaining > 0) { /* We will fill up the current sector. Write data to the current * sector first. */ #ifdef CONFIG_SMARTFS_USE_SECTOR_BUFFER readwrite.count = fs->fs_llformat.availbytes - sf->curroffset; if (readwrite.count > remaining) { readwrite.count = remaining; } memset(&sf->buffer[sf->curroffset], 0, readwrite.count); sf->bflags |= SMARTFS_BFLAG_DIRTY; #else /* CONFIG_SMARTFS_USE_SECTOR_BUFFER */ readwrite.offset = sf->curroffset; readwrite.logsector = sf->currsector; readwrite.buffer = buffer; /* Select max size that available in the current sector */ readwrite.count = fs->fs_llformat.availbytes - sf->curroffset; if (readwrite.count > remaining) { /* Limit the write to the size for our smaller working buffer */ readwrite.count = SMARTFS_TRUNCBUFFER_SIZE; } if (readwrite.count > remaining) { /* Futher limit the write to the remaining bytes to write */ readwrite.count = remaining; } /* Perform the write */ if (readwrite.count > 0) { ret = FS_IOCTL(fs, BIOC_WRITESECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error %d writing sector %d data\n", ret, sf->currsector); goto errout_with_buffer; } } #endif /* CONFIG_SMARTFS_USE_SECTOR_BUFFER */ /* Update our control variables */ sf->entry.datlen += readwrite.count; sf->byteswritten += readwrite.count; sf->curroffset += readwrite.count; remaining -= readwrite.count; /* Test if we wrote a full sector of data */ #ifdef CONFIG_SMARTFS_USE_SECTOR_BUFFER if (sf->curroffset == fs->fs_llformat.availbytes && remaining) { /* First get a new chained sector */ ret = FS_IOCTL(fs, BIOC_ALLOCSECT, 0xffff); if (ret < 0) { ferr("ERROR: Error %d allocating new sector\n", ret); goto errout_with_buffer; } /* Copy the new sector to the old one and chain it */ header = (struct smartfs_chain_header_s *) sf->buffer; *((uint16_t *)header->nextsector) = (uint16_t)ret; /* Now sync the file to write this sector out */ ret = smartfs_sync_internal(fs, sf); if (ret != OK) { goto errout_with_buffer; } /* Record the new sector in our tracking variables and reset the * offset to "zero". */ if (sf->currsector == SMARTFS_NEXTSECTOR(header)) { /* Error allocating logical sector! */ ferr("ERROR: Duplicate logical sector %d\n", sf->currsector); } sf->bflags = SMARTFS_BFLAG_DIRTY; sf->currsector = SMARTFS_NEXTSECTOR(header); sf->curroffset = sizeof(struct smartfs_chain_header_s); memset(sf->buffer, CONFIG_SMARTFS_ERASEDSTATE, fs->fs_llformat.availbytes); header->type = SMARTFS_DIRENT_TYPE_FILE; } #else /* CONFIG_SMARTFS_USE_SECTOR_BUFFER */ if (sf->curroffset == fs->fs_llformat.availbytes) { /* Sync the file to write this sector out */ ret = smartfs_sync_internal(fs, sf); if (ret != OK) { goto errout_with_buffer; } /* Allocate a new sector if needed */ if (remaining > 0) { /* Allocate a new sector */ ret = FS_IOCTL(fs, BIOC_ALLOCSECT, 0xffff); if (ret < 0) { ferr("ERROR: Error %d allocating new sector\n", ret); goto errout_with_buffer; } /* Copy the new sector to the old one and chain it */ header = (struct smartfs_chain_header_s *)fs->fs_rwbuffer; *((FAR uint16_t *)header->nextsector) = (uint16_t)ret; readwrite.offset = offsetof(struct smartfs_chain_header_s, nextsector); readwrite.buffer = (FAR uint8_t *)header->nextsector; readwrite.count = sizeof(uint16_t); ret = FS_IOCTL(fs, BIOC_WRITESECT, (unsigned long) &readwrite); if (ret < 0) { ferr("ERROR: Error %d writing next sector\n", ret); goto errout_with_buffer; } /* Record the new sector in our tracking variables and * reset the offset to "zero". */ if (sf->currsector == SMARTFS_NEXTSECTOR(header)) { /* Error allocating logical sector! */ ferr("ERROR: Duplicate logical sector %d\n", sf->currsector); } sf->currsector = SMARTFS_NEXTSECTOR(header); sf->curroffset = sizeof(struct smartfs_chain_header_s); } } #endif /* CONFIG_SMARTFS_USE_SECTOR_BUFFER */ } /* The file was successfully extended with zeros */ ret = OK; errout_with_buffer: #ifndef CONFIG_SMARTFS_USE_SECTOR_BUFFER /* Release the allocated buffer */ kmm_free(buffer); #endif /* Restore the original file position */ smartfs_seek_internal(fs, sf, savepos, SEEK_SET); return ret; } /**************************************************************************** * Name: smartfs_get_first_mount * * Description: Returns a pointer to the first mounted smartfs volume. * ****************************************************************************/ #if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS) FAR struct smartfs_mountpt_s *smartfs_get_first_mount(void) { return g_mounthead; } #endif