/**************************************************************************** * boards/arm/samd2l2/circuit-express/include/board.h * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ #ifndef __BOARDS_ARM_SAMD2L2_CIRCUIT_EXPRESS_INCLUDE_BOARD_H #define __BOARDS_ARM_SAMD2L2_CIRCUIT_EXPRESS_INCLUDE_BOARD_H /**************************************************************************** * Included Files ****************************************************************************/ #include #ifndef __ASSEMBLY__ # include # ifdef CONFIG_SAMD2L2_GPIOIRQ # include # endif #endif /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Clocking *****************************************************************/ /* Overview * * OSC8M Output = 8MHz * `- GCLK1 Input = 8MHz Prescaler = 1 output = 8MHz * `- DFLL Input = 8MHz Multiplier = 6 output = 48MHz * `- GCLK0 Input = 48MHz Prescaler = 1 output = 48MHz * `- PM Input = 48Mhz CPU divider = 1 CPU frequency = 48MHz * APBA divider = 1 APBA frequency = 48MHz * APBB divider = 1 APBB frequency = 48MHz * APBC divider = 1 APBC frequency = 48MHz * */ /* XOSC Configuration -- Not available * * BOARD_XOSC_ENABLE - Boolean (defined / not defined) * BOARD_XOSC_FREQUENCY - In Hz * BOARD_XOSC_STARTUPTIME - See SYSCTRL_XOSC_STARTUP_* definitions * BOARD_XOSC_ISCRYSTAL - Boolean (defined / not defined) * BOARD_XOSC_AMPGC - Boolean (defined / not defined) * BOARD_XOSC_ONDEMAND - Boolean (defined / not defined) * BOARD_XOSC_RUNINSTANDBY - Boolean (defined / not defined) */ #undef BOARD_XOSC_ENABLE #define BOARD_XOSC_FREQUENCY 12000000UL #define BOARD_XOSC_STARTUPTIME SYSCTRL_XOSC_STARTUP_1S #define BOARD_XOSC_ISCRYSTAL 1 #define BOARD_XOSC_AMPGC 1 #define BOARD_XOSC_ONDEMAND 1 #undef BOARD_XOSC_RUNINSTANDBY /* XOSC32 Configuration -- Not used * * BOARD_XOSC32K_ENABLE - Boolean (defined / not defined) * BOARD_XOSC32K_FREQUENCY - In Hz * BOARD_XOSC32K_STARTUPTIME - See SYSCTRL_XOSC32K_STARTUP_* definitions * BOARD_XOSC32K_ISCRYSTAL - Boolean (defined / not defined) * BOARD_XOSC32K_AAMPEN - Boolean (defined / not defined) * BOARD_XOSC32K_EN1KHZ - Boolean (defined / not defined) * BOARD_XOSC32K_EN32KHZ - Boolean (defined / not defined) * BOARD_XOSC32K_ONDEMAND - Boolean (defined / not defined) * BOARD_XOSC32K_RUNINSTANDBY - Boolean (defined / not defined) */ #undef BOARD_XOSC32K_ENABLE #define BOARD_XOSC32K_FREQUENCY 32768 /* 32.768KHz XTAL */ #define BOARD_XOSC32K_STARTUPTIME SYSCTRL_XOSC32K_STARTUP_2S #define BOARD_XOSC32K_ISCRYSTAL 1 #define BOARD_XOSC32K_AAMPEN 1 #undef BOARD_XOSC32K_EN1KHZ #define BOARD_XOSC32K_EN32KHZ 1 #define BOARD_XOSC32K_ONDEMAND 1 #undef BOARD_XOSC32K_RUNINSTANDBY /* OSC32 Configuration -- not used * * BOARD_OSC32K_ENABLE - Boolean (defined / not defined) * BOARD_OSC32K_FREQUENCY - In Hz * BOARD_OSC32K_STARTUPTIME - See SYSCTRL_OSC32K_STARTUP_* definitions * BOARD_OSC32K_EN1KHZ - Boolean (defined / not defined) * BOARD_OSC32K_EN32KHZ - Boolean (defined / not defined) * BOARD_OSC32K_ONDEMAND - Boolean (defined / not defined) * BOARD_OSC32K_RUNINSTANDBY - Boolean (defined / not defined) */ #undef BOARD_OSC32K_ENABLE #define BOARD_OSC32K_FREQUENCY 32768 /* 32.768kHz internal oscillator */ #define BOARD_OSC32K_STARTUPTIME SYSCTRL_OSC32K_STARTUP_4MS #define BOARD_OSC32K_EN1KHZ 1 #define BOARD_OSC32K_EN32KHZ 1 #define BOARD_OSC32K_ONDEMAND 1 #undef BOARD_OSC32K_RUNINSTANDBY /* OSC8M Configuration -- always enabled * * BOARD_OSC8M_PRESCALER - See SYSCTRL_OSC8M_PRESC_DIV* definitions * BOARD_OSC8M_ONDEMAND - Boolean (defined / not defined) * BOARD_OSC8M_RUNINSTANDBY - Boolean (defined / not defined) */ #define BOARD_OSC8M_PRESCALER SYSCTRL_OSC8M_PRESC_DIV1 #define BOARD_OSC8M_ONDEMAND 1 #undef BOARD_OSC8M_RUNINSTANDBY #define BOARD_OSC8M_FREQUENCY 8000000 /* 8MHz high-accuracy internal oscillator */ /* OSCULP32K Configuration -- not used. */ #define BOARD_OSCULP32K_FREQUENCY 32000 /* 32kHz ultra-low-power internal oscillator */ /* Digital Frequency Locked Loop configuration. In closed-loop mode, the * DFLL output frequency (Fdfll) is given by: * * Fdfll = DFLLmul * Frefclk * = 6 * 8000000 = 48MHz * * Where the reference clock is Generic Clock Channel 0 output of GLCK1. * GCLCK1 provides OSC8M, undivided. * * When operating in open-loop mode, the output frequency of the DFLL will * be determined by the values written to the DFLL Coarse Value bit group * and the DFLL Fine Value bit group in the DFLL Value register. * * BOARD_DFLL_OPENLOOP - Boolean (defined / not defined) * BOARD_DFLL_TRACKAFTERFINELOCK - Boolean (defined / not defined) * BOARD_DFLL_KEEPLOCKONWAKEUP - Boolean (defined / not defined) * BOARD_DFLL_ENABLECHILLCYCLE - Boolean (defined / not defined) * BOARD_DFLL_QUICKLOCK - Boolean (defined / not defined) * BOARD_DFLL_ONDEMAND - Boolean (defined / not defined) * * Closed loop mode only: * BOARD_DFLL_GCLKGEN - GCLK index * BOARD_DFLL_MULTIPLIER - Value * BOARD_DFLL_MAXCOARSESTEP - Value * BOARD_DFLL_MAXFINESTEP - Value * * BOARD_DFLL_FREQUENCY - The resulting frequency */ #define BOARD_DFLL_ENABLE 1 #define BOARD_DFLL_OPENLOOP 1 #undef BOARD_DFLL_ONDEMAND #undef BOARD_DFLL_RUNINSTANDBY /* DFLL closed loop mode configuration */ #define BOARD_DFLL_SRCGCLKGEN 1 #define BOARD_DFLL_MULTIPLIER 6 #define BOARD_DFLL_QUICKLOCK 1 #define BOARD_DFLL_TRACKAFTERFINELOCK 1 #define BOARD_DFLL_KEEPLOCKONWAKEUP 1 #define BOARD_DFLL_ENABLECHILLCYCLE 1 #define BOARD_DFLL_MAXCOARSESTEP (0x1f / 4) #define BOARD_DFLL_MAXFINESTEP (0xff / 4) #define BOARD_DFLL_FREQUENCY (48000000) /* GCLK Configuration * * Global enable/disable. * * BOARD_GCLK_ENABLE - Boolean (defined / not defined) * * For n=1-7: * BOARD_GCLKn_ENABLE - Boolean (defined / not defined) * * For n=0-8: * BOARD_GCLKn_RUN_IN_STANDBY - Boolean (defined / not defined) * BOARD_GCLKn_CLOCK_SOURCE - See GCLK_GENCTRL_SRC_* definitions * BOARD_GCLKn_PRESCALER - Value * BOARD_GCLKn_OUTPUT_ENABLE - Boolean (defined / not defined) */ #define BOARD_GCLK_ENABLE 1 /* GCLK generator 0 (Main Clock) - Source is the DFLL */ #undef BOARD_GCLK0_RUN_IN_STANDBY #define BOARD_GCLK0_CLOCK_SOURCE GCLK_GENCTRL_SRC_DFLL48M #define BOARD_GCLK0_PRESCALER 1 #undef BOARD_GCLK0_OUTPUT_ENABLE #define BOARD_GCLK0_FREQUENCY (BOARD_DFLL_FREQUENCY / BOARD_GCLK0_PRESCALER) /* Configure GCLK generator 1 - Drives the DFLL */ #define BOARD_GCLK1_ENABLE 1 #undef BOARD_GCLK1_RUN_IN_STANDBY #define BOARD_GCLK1_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M #define BOARD_GCLK1_PRESCALER 1 #undef BOARD_GCLK1_OUTPUT_ENABLE #define BOARD_GCLK1_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK1_PRESCALER) /* Configure GCLK generator 2 (RTC) */ #undef BOARD_GCLK2_ENABLE #undef BOARD_GCLK2_RUN_IN_STANDBY #define BOARD_GCLK2_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC32K #define BOARD_GCLK2_PRESCALER 32 #undef BOARD_GCLK2_OUTPUT_ENABLE #define BOARD_GCLK2_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK2_PRESCALER) /* Configure GCLK generator 3 */ #undef BOARD_GCLK3_ENABLE #undef BOARD_GCLK3_RUN_IN_STANDBY #define BOARD_GCLK3_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M #define BOARD_GCLK3_PRESCALER 1 #undef BOARD_GCLK3_OUTPUT_ENABLE #define BOARD_GCLK3_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK3_PRESCALER) /* Configure GCLK generator 4 */ #undef BOARD_GCLK4_ENABLE #undef BOARD_GCLK4_RUN_IN_STANDBY #define BOARD_GCLK4_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M #define BOARD_GCLK4_PRESCALER 1 #undef BOARD_GCLK4_OUTPUT_ENABLE #define BOARD_GCLK4_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK4_PRESCALER) /* Configure GCLK generator 5 */ #undef BOARD_GCLK5_ENABLE #undef BOARD_GCLK5_RUN_IN_STANDBY #define BOARD_GCLK5_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M #define BOARD_GCLK5_PRESCALER 1 #undef BOARD_GCLK5_OUTPUT_ENABLE #define BOARD_GCLK5_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK5_PRESCALER) /* Configure GCLK generator 6 */ #undef BOARD_GCLK6_ENABLE #undef BOARD_GCLK6_RUN_IN_STANDBY #define BOARD_GCLK6_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M #define BOARD_GCLK6_PRESCALER 1 #undef BOARD_GCLK6_OUTPUT_ENABLE #define BOARD_GCLK6_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK6_PRESCALER) /* Configure GCLK generator 7 */ #undef BOARD_GCLK7_ENABLE #undef BOARD_GCLK7_RUN_IN_STANDBY #define BOARD_GCLK7_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M #define BOARD_GCLK7_PRESCALER 1 #undef BOARD_GCLK7_OUTPUT_ENABLE #define BOARD_GCLK7_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK7_PRESCALER) /* The source of the main clock is always GCLK_MAIN. Also called GCLKGEN[0], * this is the clock feeding the Power Manager. * The Power Manager, in turn, generates main clock which is divided down to * produce the CPU, AHB, and APB clocks. * * The main clock is initially OSC8M divided by 8. */ #define BOARD_GCLK_MAIN_FREQUENCY BOARD_GCLK0_FREQUENCY /* Main clock dividers * * BOARD_CPU_DIVIDER - See PM_CPUSEL_CPUDIV_* definitions * BOARD_CPU_FRQUENCY - In Hz * BOARD_CPU_FAILDECT - Boolean (defined / not defined) * BOARD_APBA_DIVIDER - See M_APBASEL_APBADIV_* definitions * BOARD_APBA_FRQUENCY - In Hz * BOARD_APBB_DIVIDER - See M_APBBSEL_APBBDIV_* definitions * BOARD_APBB_FRQUENCY - In Hz * BOARD_APBC_DIVIDER - See M_APBCSEL_APBCDIV_* definitions * BOARD_APBC_FRQUENCY - In Hz */ #define BOARD_CPU_FAILDECT 1 #define BOARD_CPU_DIVIDER PM_CPUSEL_CPUDIV_1 #define BOARD_APBA_DIVIDER PM_APBASEL_APBADIV_1 #define BOARD_APBB_DIVIDER PM_APBBSEL_APBBDIV_1 #define BOARD_APBC_DIVIDER PM_APBCSEL_APBCDIV_1 /* Resulting frequencies */ #define BOARD_MCK_FREQUENCY (BOARD_GCLK_MAIN_FREQUENCY) #define BOARD_CPU_FREQUENCY (BOARD_MCK_FREQUENCY) #define BOARD_PBA_FREQUENCY (BOARD_MCK_FREQUENCY) #define BOARD_PBB_FREQUENCY (BOARD_MCK_FREQUENCY) #define BOARD_PBC_FREQUENCY (BOARD_MCK_FREQUENCY) #define BOARD_PBD_FREQUENCY (BOARD_MCK_FREQUENCY) /* FLASH wait states * * Vdd Range Wait states Maximum Operating Frequency * ------------- -------------- --------------------------- * 1.62V to 2.7V 0 14 MHz * 1 28 MHz * 2 42 MHz * 3 48 MHz * 2.7V to 3.63V 0 24 MHz * 1 48 MHz */ #if 0 /* REVISIT -- should not be necessary */ # define BOARD_FLASH_WAITSTATES 1 #else # define BOARD_FLASH_WAITSTATES 2 #endif /* SERCOM definitions *******************************************************/ /* This is the source clock generator for the GCLK_SERCOM_SLOW clock that is * common to all SERCOM modules. */ #define BOARD_SERCOM05_SLOW_GCLKGEN 0 /* SERCOM5 USART used to Serial Console * * PIN PORT SERCOM FUNCTION * --- ------------------ ----------- * 7 PB08 SERCOM4 PAD0 USART TXD * 8 PB09 SERCOM4 PAD1 USART RXD */ #define BOARD_SERCOM4_GCLKGEN 0 #define BOARD_SERCOM4_SLOW_GCLKGEN BOARD_SERCOM05_SLOW_GCLKGEN #define BOARD_SERCOM4_MUXCONFIG (USART_CTRLA_RXPAD1 | USART_CTRLA_TXPAD0_1) #define BOARD_SERCOM4_PINMAP_PAD0 PORT_SERCOM4_PAD0_3 /* USART 4 TXD */ #define BOARD_SERCOM4_PINMAP_PAD1 PORT_SERCOM4_PAD1_3 /* USART 4 RXD */ #define BOARD_SERCOM4_PINMAP_PAD2 0 #define BOARD_SERCOM4_PINMAP_PAD3 0 #define BOARD_SERCOM4_FREQUENCY BOARD_GCLK0_FREQUENCY /* USB definitions **********************************************************/ /* This is the source clock generator for the GCLK_USB clock */ #define BOARD_USB_GCLKGEN 0 #define BOARD_USB_FREQUENCY BOARD_GCLK0_FREQUENCY /* default USB Pad calibration (not used yet by USB driver) */ #define BOARD_USB_PADCAL_P 29 #define BOARD_USB_PADCAL_N 5 #define BOARD_USB_PADCAL_TRIM 3 /* LED definitions **********************************************************/ /* There are 2 LEDs on board the Adafruit Circuit Express board in addition * to the neopixel LEDs. * The power ON LED which is connected to the 3.3V rail. * D13 which is an active high user status LED. * * This user LED is controlled by PA17. */ /* LED index values for use with board_userled() */ #define BOARD_STATUS_LED 0 #define BOARD_NLEDS 1 /* LED bits for use with board_userled_all() */ #define BOARD_STATUS LED_BIT (1 << BOARD_STATUS_LED) /* When CONFIG_ARCH_LEDS is defined in the NuttX configuration, NuttX will * control the LED as defined below. Thus if the LED is statically on, NuttX * has successfully booted and is, apparently, running normally. * If the LED is flashing at approximately 2Hz, then a fatal error * has been detected and the system has halted. */ #define LED_STARTED 0 /* STATUS LED=OFF */ #define LED_HEAPALLOCATE 0 /* STATUS LED=OFF */ #define LED_IRQSENABLED 0 /* STATUS LED=OFF */ #define LED_STACKCREATED 1 /* STATUS LED=ON */ #define LED_INIRQ 2 /* STATUS LED=no change */ #define LED_SIGNAL 2 /* STATUS LED=no change */ #define LED_ASSERTION 2 /* STATUS LED=no change */ #define LED_PANIC 3 /* STATUS LED=flashing */ /* Button definitions *******************************************************/ /* Mechanical buttons: * * The Adafruit Circuit Express contains 2 mechanical buttons and a switch. */ #define NUM_BUTTONS 3 #endif /* __BOARDS_ARM_SAMD2L2_CIRCUIT_EXPRESS_INCLUDE_BOARD_H */