#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

menuconfig PM
	bool "Power management (PM) system"
	default n
	---help---
		Power management (PM) system. It consists of an OS interface
		to board logic which can be used to obtain a recommended
		power level according to a power management policy set by the
		currently chosen PM governor. It is also used by drivers which
		can allow or not a power level to be changed or not.

if PM

config PM_NDOMAINS
	int "Number of PM activity domains"
	default 1
	---help---
		Defines the number of "domains" that the PM system can control.
		For example, you may want to separately manage the power from the
		Network domain, shutting down the network when it is not be used,
		from the UI domain, shutting down the UI when it is not in use.

choice
	prompt "PM system governor"
	default PM_GOVERNOR_ACTIVITY
	---help---
		A PM governor applies a policy to control the change in power
		states.

config PM_GOVERNOR_GREEDY
	bool "Greedy governor"
	---help---
		This governor simply suggests the lowest-possible power state,
		considering any states locked by calls to pm_stay() (accessible
		via BOARDIOC_PM_STAY boardctl calls).

config PM_GOVERNOR_ACTIVITY
	bool "Activity based"
	---help---
		The activity based governor receives activity reports from drivers
		in units which are accumulated during a certain time slice interval.
		The governor will then switch between power states given a set of
		activity thresholds for each state.

config PM_GOVERNOR_CUSTOM
	bool "Custom governor"
	---help---
		By selecting this option, a custom governor can be supplied from
		board-logic.

endchoice

menu "Governor options"

if PM_GOVERNOR_GREEDY

config PM_GOVERNOR_EXPLICIT_RELAX
	bool "Stay initially at PM_NORMAL"
	---help---
		If you boot into NSH, when using the greedy PM governor, since NuttX will
		almost immediately go idle (when waiting for a prompt), he lowest possible
		run-level will be selected, which may not be desirable.
		This is not a problem if you directly run you application at boot, which
		can hold off power levels using pm_stay() (via boardctl).

		This option will initialize all run levels as if pm_stay() were to be
		called once for each, so that your application needs to call pm_relax()
		(via boardctl()) for every run-level you wish to allow to enter.

endif


if PM_GOVERNOR_ACTIVITY

config PM_GOVERNOR_SLICEMS
	int "PM time slice (msec)"
	default 100
	---help---
		The power management module collects activity counts in time slices.
		At the end of the time slice, the count accumulated during that
		interval is applied to an averaging algorithm to determine the
		activity level.

		CONFIG_PM_GOVERNOR_SLICEMS provides the duration of that time slice in
		milliseconds.  Default: 100 Milliseconds

config PM_GOVERNOR_MEMORY
	int "PM memory (msec)"
	default 2
	range 1 6
	---help---
		The averaging algorithm is simply: Y = (An*X + SUM(Ai*Yi))/SUM(Aj),
		where i = 1..n-1 and j= 1..n, n is the length of the "memory",
		Ai is the weight applied to each value, and X is the current
		activity.  These weights may be negative and a limited to the
		range of int16_t.

		  CONFIG_PM_GOVERNOR_MEMORY provides the memory for the algorithm.
		    Default: 2
		  CONFIG_PM_GOVERNOR_COEFn provides weight for each sample.  Default: 1

		Setting CONFIG_PM_GOVERNOR_MEMORY=1 disables all smoothing.

config PM_GOVERNOR_COEFN
	int "PM coefficient"
	default 1
	---help---
		See help associated with CONFIG_PM_GOVERNOR_MEMORY.

config PM_GOVERNOR_COEF1
	int "PM coefficient 1"
	default 1
	---help---
		See help associated with CONFIG_PM_GOVERNOR_MEMORY.

config PM_GOVERNOR_COEF2
	int "PM coefficient 2"
	default 1
	---help---
		See help associated with CONFIG_PM_GOVERNOR_MEMORY

		Ignored if CONFIG_PM_GOVERNOR_MEMORY <= 2

config PM_GOVERNOR_COEF3
	int "PM coefficient 3"
	default 1
	---help---
		See help associated with CONFIG_PM_GOVERNOR_MEMORY

		Ignored if CONFIG_PM_GOVERNOR_MEMORY <= 3

config PM_GOVERNOR_COEF4
	int "PM coefficient 4"
	default 1
	---help---
		See help associated with CONFIG_PM_GOVERNOR_MEMORY

		Ignored if CONFIG_PM_GOVERNOR_MEMORY <= 4

config PM_GOVERNOR_COEF5
	int "PM coefficient 5"
	default 1
	---help---
		See help associated with CONFIG_PM_GOVERNOR_MEMORY

		Ignored if CONFIG_PM_GOVERNOR_MEMORY <= 5

config PM_GOVERNOR_IDLEENTER_THRESH
	int "PM IDLE enter threshold"
	default 1
	---help---
		State changes then occur when the weight activity account crosses
		threshold values for certain periods of time (time slice count).

		  CONFIG_PM_xxxENTER_THRESH is the threshold value for entering state xxx.
		  CONFIG_PM_xxxENTER_COUNT is the count for entering state xxx.

		Resuming to normal state, on the other hand, is usually immediate and
		controlled by wakeup conditions established by the platform.

		Default: <=1: Essentially no activity

config PM_GOVERNOR_IDLEEXIT_THRESH
	int "PM IDLE exit threshold"
	default 2
	---help---
		State changes then occur when the weight activity account crosses
		threshold values for certain periods of time (time slice count).

		  CONFIG_PM_xxxENTER_THRESH is the threshold value for entering state xxx.
		  CONFIG_PM_xxxENTER_COUNT is the count for entering state xxx.

		Resuming to normal state, on the other hand, is usually immediate and
		controlled by wakeup conditions established by the platform.

		Default: >=2: Active

config PM_GOVERNOR_IDLEENTER_COUNT
	int "PM IDLE enter count"
	default 30
	---help---
		State changes then occur when the weight activity account crosses
		threshold values for certain periods of time (time slice count).

		  CONFIG_PM_xxxENTER_THRESH is the threshold value for entering state xxx.
		  CONFIG_PM_xxxENTER_COUNT is the count for entering state xxx.

		Resuming to normal state, on the other hand, is usually immediate and
		controlled by wakeup conditions established by the platform.

		Default: Thirty IDLE slices to enter IDLE mode from normal

config PM_GOVERNOR_STANDBYENTER_THRESH
	int "PM STANDBY enter threshold"
	default 1
	---help---
		State changes then occur when the weight activity account crosses
		threshold values for certain periods of time (time slice count).

		  CONFIG_PM_xxxENTER_THRESH is the threshold value for entering state xxx.
		  CONFIG_PM_xxxENTER_COUNT is the count for entering state xxx.

		Resuming to normal state, on the other hand, is usually immediate and
		controlled by wakeup conditions established by the platform.

		Default: <=1: Essentially no activity

config PM_GOVERNOR_STANDBYEXIT_THRESH
	int "PM STANDBY exit threshold"
	default 2
	---help---
		State changes then occur when the weight activity account crosses
		threshold values for certain periods of time (time slice count).

		  CONFIG_PM_xxxENTER_THRESH is the threshold value for entering state xxx.
		  CONFIG_PM_xxxENTER_COUNT is the count for entering state xxx.

		Resuming to normal state, on the other hand, is usually immediate and
		controlled by wakeup conditions established by the platform.

		Default: >=2: Active

config PM_GOVERNOR_STANDBYENTER_COUNT
	int "PM STANDBY enter count"
	default 50
	---help---
		State changes then occur when the weight activity account crosses
		threshold values for certain periods of time (time slice count).

		  CONFIG_PM_xxxENTER_THRESH is the threshold value for entering state xxx.
		  CONFIG_PM_xxxENTER_COUNT is the count for entering state xxx.

		Resuming to normal state, on the other hand, is usually immediate and
		controlled by wakeup conditions established by the platform.

		Default: Fifty IDLE slices to enter STANDBY mode from IDLE

config PM_GOVERNOR_SLEEPENTER_THRESH
	int "PM SLEEP enter threshold"
	default 1
	---help---
		State changes then occur when the weight activity account crosses
		threshold values for certain periods of time (time slice count).

		  CONFIG_PM_xxxENTER_THRESH is the threshold value for entering state xxx.
		  CONFIG_PM_xxxENTER_COUNT is the count for entering state xxx.

		Resuming to normal state, on the other hand, is usually immediate and
		controlled by wakeup conditions established by the platform.

		Default: <=1: Essentially no activity

config PM_GOVERNOR_SLEEPEXIT_THRESH
	int "PM SLEEP exit threshold"
	default 2
	---help---
		State changes then occur when the weight activity account crosses
		threshold values for certain periods of time (time slice count).

		  CONFIG_PM_xxxENTER_THRESH is the threshold value for entering state xxx.
		  CONFIG_PM_xxxENTER_COUNT is the count for entering state xxx.

		Resuming to normal state, on the other hand, is usually immediate and
		controlled by wakeup conditions established by the platform.

		Default: >=2: Active

config PM_GOVERNOR_SLEEPENTER_COUNT
	int "PM SLEEP enter count"
	default 70
	---help---
		State changes then occur when the weight activity account crosses
		threshold values for certain periods of time (time slice count).

		  CONFIG_PM_xxxENTER_THRESH is the threshold value for entering state xxx.
		  CONFIG_PM_xxxENTER_COUNT is the count for entering state xxx.

		Resuming to normal state, on the other hand, is usually immediate and
		controlled by wakeup conditions established by the platform.

		Default: Fifty IDLE slices to enter SLEEP mode from STANDBY

endif # PM_GOVERNOR_ACTIVITY

endmenu

endif # PM

config DRIVERS_POWERLED
	bool "High Power LED driver"
	default n
	---help---
		Enables building of an powerled upper half driver.

menuconfig DRIVERS_SMPS
	bool "Switched-Mode Power Supply (SMPS)"
	default n
	---help---
		Enables building of an SMPS upper half driver.

if DRIVERS_SMPS

config SMPS_HAVE_OUTPUT_VOLTAGE
	bool "Have Output Voltage"
	default n

config SMPS_HAVE_OUTPUT_CURRENT
	bool "Have Output Current"
	default n

config SMPS_HAVE_OUTPUT_POWER
	bool "Have Output Power"
	default n

config SMPS_HAVE_INPUT_VOLTAGE
	bool "Have Input Voltage"
	default n

config SMPS_HAVE_INPUT_CURRENT
	bool "Have Input Current"
	default n

config SMPS_HAVE_INPUT_POWER
	bool "Have Input Power"
	default n

config SMPS_HAVE_EFFICIENCY
	bool "Have Power Efficiency"
	default n

endif

config DRIVERS_MOTOR
	bool "Motor driver"
	default n
	---help---
		Enables building of a motor upper half driver.

if DRIVERS_MOTOR

config MOTOR_HAVE_POSITION
	bool "Have position control"
	default n

config MOTOR_HAVE_DIRECTION
	bool "Have direction control"
	default n

config MOTOR_HAVE_SPEED
	bool "Have speed control"
	default n

config MOTOR_HAVE_TORQUE
	bool "Have torque control (rotary motors)"
	default n

config MOTOR_HAVE_FORCE
	bool "Have force control (linear motors)"
	default n

config MOTOR_HAVE_ACCELERATION
	bool "Have acceleration control"
	default n

config MOTOR_HAVE_DECELERATION
	bool "Have deceleration control"
	default n

config MOTOR_HAVE_INPUT_VOLTAGE
	bool "Have input voltage protection"
	default n

config MOTOR_HAVE_INPUT_CURRENT
	bool "Have input current protection"
	default n

config MOTOR_HAVE_INPUT_POWER
	bool "Have input power protection"
	default n

endif

menuconfig POWER
	bool "Power Management Support"
	default n
	---help---
		Enable building of power-related devices (battery monitors, chargers,
		etc).

if POWER

config BATTERY_CHARGER
	bool "Battery Charger support"
	default n

config BQ2425X
	bool "BQ2425X Battery charger support"
	default n
	select I2C
	select I2C_BQ2425X
	depends on BATTERY_CHARGER
	---help---
		The BQ24250/BQ24251 are battery charger for lithium-ion batteries.

config BQ2429X
	bool "BQ2429X Battery charger support"
	default n
	select I2C
	select I2C_BQ2429X
	depends on BATTERY_CHARGER
	---help---
		The BQ24296/BQ24297/BQ24296M are battery charger for lithium-ion batteries.

config MCP73871
	bool "Microchip MCP73871 Battery charger support"
	default n
	depends on BATTERY_CHARGER
	---help---
		A simple driver to report MCP73871 status.

if BQ2429X

config DEBUG_BQ2429X
	bool "BQ2429X Debug Features"
	default n
	---help---
		Enable BQ2429X battery management debug features.

endif # BQ2429X

config BATTERY_GAUGE
	bool "Battery Fuel Gauge support"
	default n

config MAX1704X
	bool "MAX1704X Battery fuel gauge support"
	default n
	select I2C
	select I2C_MAX1704X
	depends on BATTERY_GAUGE
	---help---
		The MAX17040/MAX17041 are ultra-compact, low-cost, host-side fuel-gauge
		systems for lithium-ion (Li+) batteries in handheld and portable equipment.
		The MAX17040 is configured to operate with a single lithium cell and the
		MAX17041 is configured for a dual-cell 2S pack.

config BQ27426
	bool "BQ27426 Battery fuel gauge support"
	default n
	select I2C
	depends on BATTERY_GAUGE
	---help---
		The bq27426 battery fuel gauge accurately predicts the battery capacity and other 
		operational characteristics of a single, Li-based, rechargeable cell. 
		It can be interrogated by a system processor to provide cell information, 
		such as state-of-charge (SOC).

if BQ27426

config DEBUG_BQ27426
	bool "BQ27426 Debug Features"
	default n
	---help---
		Enable BQ27426 battery management debug features.

endif # BQ27426

config I2C_BQ2425X
	bool
	default y if BQ2425X

config I2C_BQ2429X
	bool
	default y if BQ2429X

config I2C_MAX1704X
	bool
	default y if MAX1704X
	
config BATTERY_MONITOR
	bool "Battery Monitor/Management support"
	default n
	
config BQ769X0
	bool "BQ769X0 Battery monitor support"
	default n
	select I2C
	select I2C_BQ769X0
	depends on BATTERY_MONITOR
	---help---
		The BQ76920/BQ76930/BQ76940 provide monitoring, balancing, and
		protection features for up to 15 cells in series.
		
config I2C_BQ769X0
	bool
	default y if BQ769X0

if BQ769X0
	config DEBUG_BQ769X0
		bool "BQ769X0 debug features"
		default n

	config BQ769X0_USE_INTERNAL_TS
		bool "Use internal temperature sensor on BQ769X0"
		default n
endif

endif # POWER