/**************************************************************************** * arch/xtensa/include/esp32/core-isa.h * Xtensa processor CORE configuration * * Customer ID=11657; Build=0x5fe96; Copyright (c) 1999-2016 Tensilica Inc. * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * ****************************************************************************/ #ifndef __ARCH_XTENSA_INCLUDE_ESP32_CORE_ISA_H #define __ARCH_XTENSA_INCLUDE_ESP32_CORE_ISA_H /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option * is configured, and a value of 0 otherwise. These macros are always * defined. */ /* ISA **********************************************************************/ #define XCHAL_HAVE_BE 0 /* big-endian byte ordering */ #define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ #define XCHAL_NUM_AREGS 64 /* num of physical addr regs */ #define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */ #define XCHAL_MAX_INSTRUCTION_SIZE 3 /* max instr bytes (3..8) */ #define XCHAL_HAVE_DEBUG 1 /* debug option */ #define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ #define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ #define XCHAL_LOOP_BUFFER_SIZE 256 /* zero-ov. loop instr buffer size */ #define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ #define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */ #define XCHAL_HAVE_SEXT 1 /* SEXT instruction */ #define XCHAL_HAVE_DEPBITS 0 /* DEPBITS instruction */ #define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */ #define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */ #define XCHAL_HAVE_MUL32 1 /* MULL instruction */ #define XCHAL_HAVE_MUL32_HIGH 1 /* MULUH/MULSH instructions */ #define XCHAL_HAVE_DIV32 1 /* QUOS/QUOU/REMS/REMU instructions */ #define XCHAL_HAVE_L32R 1 /* L32R instruction */ #define XCHAL_HAVE_ABSOLUTE_LITERALS 0 /* non-PC-rel (extended) L32R */ #define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ #define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ #define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ #define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ #define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ #define XCHAL_HAVE_ABS 1 /* ABS instruction */ /*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ /*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ #define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */ #define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */ #define XCHAL_HAVE_SPECULATION 0 /* speculation */ #define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ #define XCHAL_NUM_CONTEXTS 1 /* */ #define XCHAL_NUM_MISC_REGS 4 /* num of scratch regs (0..4) */ #define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ #define XCHAL_HAVE_PRID 1 /* processor ID register */ #define XCHAL_HAVE_EXTERN_REGS 1 /* WER/RER instructions */ #define XCHAL_HAVE_MX 0 /* MX core (Tensilica internal) */ #define XCHAL_HAVE_MP_INTERRUPTS 0 /* interrupt distributor port */ #define XCHAL_HAVE_MP_RUNSTALL 0 /* core RunStall control port */ #define XCHAL_HAVE_PSO 0 /* Power Shut-Off */ #define XCHAL_HAVE_PSO_CDM 0 /* core/debug/mem pwr domains */ #define XCHAL_HAVE_PSO_FULL_RETENTION 0 /* all regs preserved on PSO */ #define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */ #define XCHAL_HAVE_BOOLEANS 1 /* boolean registers */ #define XCHAL_HAVE_CP 1 /* CPENABLE reg (coprocessor) */ #define XCHAL_CP_MAXCFG 8 /* max allowed cp id plus one */ #define XCHAL_HAVE_MAC16 1 /* MAC16 package */ #define XCHAL_HAVE_FUSION 0 /* Fusion*/ #define XCHAL_HAVE_FUSION_FP 0 /* Fusion FP option */ #define XCHAL_HAVE_FUSION_LOW_POWER 0 /* Fusion Low Power option */ #define XCHAL_HAVE_FUSION_AES 0 /* Fusion BLE/Wifi AES-128 CCM option */ #define XCHAL_HAVE_FUSION_CONVENC 0 /* Fusion Conv Encode option */ #define XCHAL_HAVE_FUSION_LFSR_CRC 0 /* Fusion LFSR-CRC option */ #define XCHAL_HAVE_FUSION_BITOPS 0 /* Fusion Bit Operations Support option */ #define XCHAL_HAVE_FUSION_AVS 0 /* Fusion AVS option */ #define XCHAL_HAVE_FUSION_16BIT_BASEBAND 0 /* Fusion 16-bit Baseband option */ #define XCHAL_HAVE_FUSION_VITERBI 0 /* Fusion Viterbi option */ #define XCHAL_HAVE_FUSION_SOFTDEMAP 0 /* Fusion Soft Bit Demap option */ #define XCHAL_HAVE_HIFIPRO 0 /* HiFiPro Audio Engine pkg */ #define XCHAL_HAVE_HIFI4 0 /* HiFi4 Audio Engine pkg */ #define XCHAL_HAVE_HIFI4_VFPU 0 /* HiFi4 Audio Engine VFPU option */ #define XCHAL_HAVE_HIFI3 0 /* HiFi3 Audio Engine pkg */ #define XCHAL_HAVE_HIFI3_VFPU 0 /* HiFi3 Audio Engine VFPU option */ #define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */ #define XCHAL_HAVE_HIFI2EP 0 /* HiFi2EP */ #define XCHAL_HAVE_HIFI_MINI 0 #define XCHAL_HAVE_VECTORFPU2005 0 /* vector or user floating-point pkg */ #define XCHAL_HAVE_USER_DPFPU 0 /* user DP floating-point pkg */ #define XCHAL_HAVE_USER_SPFPU 0 /* user DP floating-point pkg */ #define XCHAL_HAVE_FP 1 /* single prec floating point */ #define XCHAL_HAVE_FP_DIV 1 /* FP with DIV instructions */ #define XCHAL_HAVE_FP_RECIP 1 /* FP with RECIP instructions */ #define XCHAL_HAVE_FP_SQRT 1 /* FP with SQRT instructions */ #define XCHAL_HAVE_FP_RSQRT 1 /* FP with RSQRT instructions */ #define XCHAL_HAVE_DFP 0 /* double precision FP pkg */ #define XCHAL_HAVE_DFP_DIV 0 /* DFP with DIV instructions */ #define XCHAL_HAVE_DFP_RECIP 0 /* DFP with RECIP instructions*/ #define XCHAL_HAVE_DFP_SQRT 0 /* DFP with SQRT instructions */ #define XCHAL_HAVE_DFP_RSQRT 0 /* DFP with RSQRT instructions*/ #define XCHAL_HAVE_DFP_ACCEL 1 /* double precision FP acceleration pkg */ #define XCHAL_HAVE_DFP_accel XCHAL_HAVE_DFP_ACCEL /* for backward compatibility */ #define XCHAL_HAVE_DFPU_SINGLE_ONLY 1 /* DFPU Coprocessor, single precision only */ #define XCHAL_HAVE_DFPU_SINGLE_DOUBLE 0 /* DFPU Coprocessor, single and double precision */ #define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ #define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ #define XCHAL_HAVE_PDX4 0 /* PDX4 */ #define XCHAL_HAVE_CONNXD2 0 /* ConnX D2 pkg */ #define XCHAL_HAVE_CONNXD2_DUALLSFLIX 0 /* ConnX D2 & Dual LoadStore Flix */ #define XCHAL_HAVE_BBE16 0 /* ConnX BBE16 pkg */ #define XCHAL_HAVE_BBE16_RSQRT 0 /* BBE16 & vector recip sqrt */ #define XCHAL_HAVE_BBE16_VECDIV 0 /* BBE16 & vector divide */ #define XCHAL_HAVE_BBE16_DESPREAD 0 /* BBE16 & despread */ #define XCHAL_HAVE_BBENEP 0 /* ConnX BBENEP pkgs */ #define XCHAL_HAVE_BSP3 0 /* ConnX BSP3 pkg */ #define XCHAL_HAVE_BSP3_TRANSPOSE 0 /* BSP3 & transpose32x32 */ #define XCHAL_HAVE_SSP16 0 /* ConnX SSP16 pkg */ #define XCHAL_HAVE_SSP16_VITERBI 0 /* SSP16 & viterbi */ #define XCHAL_HAVE_TURBO16 0 /* ConnX Turbo16 pkg */ #define XCHAL_HAVE_BBP16 0 /* ConnX BBP16 pkg */ #define XCHAL_HAVE_FLIX3 0 /* basic 3-way FLIX option */ #define XCHAL_HAVE_GRIVPEP 0 /* GRIVPEP is General Release of IVPEP */ #define XCHAL_HAVE_GRIVPEP_HISTOGRAM 0 /* Histogram option on GRIVPEP */ /* Misc. ********************************************************************/ #define XCHAL_NUM_LOADSTORE_UNITS 1 /* load/store units */ #define XCHAL_NUM_WRITEBUFFER_ENTRIES 4 /* size of write buffer */ #define XCHAL_INST_FETCH_WIDTH 4 /* instr-fetch width in bytes */ #define XCHAL_DATA_WIDTH 4 /* data width in bytes */ #define XCHAL_DATA_PIPE_DELAY 2 /* d-side pipeline delay * (1 = 5-stage, 2 = 7-stage) */ #define XCHAL_CLOCK_GATING_GLOBAL 1 /* global clock gating */ #define XCHAL_CLOCK_GATING_FUNCUNIT 1 /* funct. unit clock gating */ /* In T1050, applies to selected core load and store instructions (see ISA): */ #define XCHAL_UNALIGNED_LOAD_EXCEPTION 0 /* unaligned loads cause exc. */ #define XCHAL_UNALIGNED_STORE_EXCEPTION 0 /* unaligned stores cause exc.*/ #define XCHAL_UNALIGNED_LOAD_HW 1 /* unaligned loads work in hw */ #define XCHAL_UNALIGNED_STORE_HW 1 /* unaligned stores work in hw*/ #define XCHAL_SW_VERSION 1100003 /* sw version of this header */ #define XCHAL_CORE_ID "esp32_v3_49_prod" /* alphanum core name * (CoreID) set in the Xtensa * Processor Generator */ #define XCHAL_BUILD_UNIQUE_ID 0x0005fe96 /* 22-bit sw build ID */ /* * These definitions describe the hardware targeted by this software. */ #define XCHAL_HW_CONFIGID0 0xc2bcfffe /* ConfigID hi 32 bits*/ #define XCHAL_HW_CONFIGID1 0x1cc5fe96 /* ConfigID lo 32 bits*/ #define XCHAL_HW_VERSION_NAME "LX6.0.3" /* full version name */ #define XCHAL_HW_VERSION_MAJOR 2600 /* major ver# of targeted hw */ #define XCHAL_HW_VERSION_MINOR 3 /* minor ver# of targeted hw */ #define XCHAL_HW_VERSION 260003 /* major*100+minor */ #define XCHAL_HW_REL_LX6 1 #define XCHAL_HW_REL_LX6_0 1 #define XCHAL_HW_REL_LX6_0_3 1 #define XCHAL_HW_CONFIGID_RELIABLE 1 /* If software targets a *range* of hardware versions, these are the bounds: */ #define XCHAL_HW_MIN_VERSION_MAJOR 2600 /* major v of earliest tgt hw */ #define XCHAL_HW_MIN_VERSION_MINOR 3 /* minor v of earliest tgt hw */ #define XCHAL_HW_MIN_VERSION 260003 /* earliest targeted hw */ #define XCHAL_HW_MAX_VERSION_MAJOR 2600 /* major v of latest tgt hw */ #define XCHAL_HW_MAX_VERSION_MINOR 3 /* minor v of latest tgt hw */ #define XCHAL_HW_MAX_VERSION 260003 /* latest targeted hw */ /* Cache ********************************************************************/ #define XCHAL_ICACHE_LINESIZE 4 /* I-cache line size in bytes */ #define XCHAL_DCACHE_LINESIZE 4 /* D-cache line size in bytes */ #define XCHAL_ICACHE_LINEWIDTH 2 /* log2(I line size in bytes) */ #define XCHAL_DCACHE_LINEWIDTH 2 /* log2(D line size in bytes) */ #define XCHAL_ICACHE_SIZE 0 /* I-cache size in bytes or 0 */ #define XCHAL_DCACHE_SIZE 0 /* D-cache size in bytes or 0 */ #define XCHAL_DCACHE_IS_WRITEBACK 0 /* writeback feature */ #define XCHAL_DCACHE_IS_COHERENT 0 /* MP coherence feature */ #define XCHAL_HAVE_PREFETCH 0 /* PREFCTL register */ #define XCHAL_HAVE_PREFETCH_L1 0 /* prefetch to L1 dcache */ #define XCHAL_PREFETCH_CASTOUT_LINES 0 /* dcache pref. castout bufsz */ #define XCHAL_PREFETCH_ENTRIES 0 /* cache prefetch entries */ #define XCHAL_PREFETCH_BLOCK_ENTRIES 0 /* prefetch block streams */ #define XCHAL_HAVE_CACHE_BLOCKOPS 0 /* block prefetch for caches */ #define XCHAL_HAVE_ICACHE_TEST 0 /* Icache test instructions */ #define XCHAL_HAVE_DCACHE_TEST 0 /* Dcache test instructions */ #define XCHAL_HAVE_ICACHE_DYN_WAYS 0 /* Icache dynamic way support */ #define XCHAL_HAVE_DCACHE_DYN_WAYS 0 /* Dcache dynamic way support */ /* Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code */ #ifndef XCHAL_HAL_NON_PRIVILEGED_ONLY /* Cache ********************************************************************/ #define XCHAL_HAVE_PIF 1 /* any outbound PIF present */ #define XCHAL_HAVE_AXI 0 /* AXI bus */ #define XCHAL_HAVE_PIF_WR_RESP 0 /* pif write response */ #define XCHAL_HAVE_PIF_REQ_ATTR 0 /* pif attribute */ /* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ /* Number of cache sets in log2(lines per way): */ #define XCHAL_ICACHE_SETWIDTH 0 #define XCHAL_DCACHE_SETWIDTH 0 /* Cache set associativity (number of ways): */ #define XCHAL_ICACHE_WAYS 1 #define XCHAL_DCACHE_WAYS 1 /* Cache features: */ #define XCHAL_ICACHE_LINE_LOCKABLE 0 #define XCHAL_DCACHE_LINE_LOCKABLE 0 #define XCHAL_ICACHE_ECC_PARITY 0 #define XCHAL_DCACHE_ECC_PARITY 0 /* Cache access size in bytes (affects operation of SICW instruction): */ #define XCHAL_ICACHE_ACCESS_SIZE 1 #define XCHAL_DCACHE_ACCESS_SIZE 1 #define XCHAL_DCACHE_BANKS 0 /* number of banks */ /* Number of encoded cache attr bits for decoded bits): */ #define XCHAL_CA_BITS 4 /* Internal I/D RAM/ROMs and XLMI *******************************************/ #define XCHAL_NUM_INSTROM 1 /* number of core instr. ROMs */ #define XCHAL_NUM_INSTRAM 2 /* number of core instr. RAMs */ #define XCHAL_NUM_DATAROM 1 /* number of core data ROMs */ #define XCHAL_NUM_DATARAM 2 /* number of core data RAMs */ #define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ #define XCHAL_NUM_XLMI 1 /* number of core XLMI ports */ /* Instruction ROM 0: */ #define XCHAL_INSTROM0_VADDR 0x40800000 /* virtual address */ #define XCHAL_INSTROM0_PADDR 0x40800000 /* physical address */ #define XCHAL_INSTROM0_SIZE 4194304 /* size in bytes */ #define XCHAL_INSTROM0_ECC_PARITY 0 /* ECC/parity type, 0=none */ /* Instruction RAM 0: */ #define XCHAL_INSTRAM0_VADDR 0x40000000 /* virtual address */ #define XCHAL_INSTRAM0_PADDR 0x40000000 /* physical address */ #define XCHAL_INSTRAM0_SIZE 4194304 /* size in bytes */ #define XCHAL_INSTRAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */ /* Instruction RAM 1: */ #define XCHAL_INSTRAM1_VADDR 0x40400000 /* virtual address */ #define XCHAL_INSTRAM1_PADDR 0x40400000 /* physical address */ #define XCHAL_INSTRAM1_SIZE 4194304 /* size in bytes */ #define XCHAL_INSTRAM1_ECC_PARITY 0 /* ECC/parity type, 0=none */ /* Data ROM 0: */ #define XCHAL_DATAROM0_VADDR 0x3F400000 /* virtual address */ #define XCHAL_DATAROM0_PADDR 0x3F400000 /* physical address */ #define XCHAL_DATAROM0_SIZE 4194304 /* size in bytes */ #define XCHAL_DATAROM0_ECC_PARITY 0 /* ECC/parity type, 0=none */ #define XCHAL_DATAROM0_BANKS 1 /* number of banks */ /* Data RAM 0: */ #define XCHAL_DATARAM0_VADDR 0x3FF80000 /* virtual address */ #define XCHAL_DATARAM0_PADDR 0x3FF80000 /* physical address */ #define XCHAL_DATARAM0_SIZE 524288 /* size in bytes */ #define XCHAL_DATARAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */ #define XCHAL_DATARAM0_BANKS 1 /* number of banks */ /* Data RAM 1: */ #define XCHAL_DATARAM1_VADDR 0x3F800000 /* virtual address */ #define XCHAL_DATARAM1_PADDR 0x3F800000 /* physical address */ #define XCHAL_DATARAM1_SIZE 4194304 /* size in bytes */ #define XCHAL_DATARAM1_ECC_PARITY 0 /* ECC/parity type, 0=none */ #define XCHAL_DATARAM1_BANKS 1 /* number of banks */ /* XLMI Port 0: */ #define XCHAL_XLMI0_VADDR 0x3FF00000 /* virtual address */ #define XCHAL_XLMI0_PADDR 0x3FF00000 /* physical address */ #define XCHAL_XLMI0_SIZE 524288 /* size in bytes */ #define XCHAL_XLMI0_ECC_PARITY 0 /* ECC/parity type, 0=none */ #define XCHAL_HAVE_IMEM_LOADSTORE 1 /* can load/store to IROM/IRAM*/ /* Interrupts and Timers ****************************************************/ #define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ #define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ #define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */ #define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ #define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ #define XCHAL_NUM_INTERRUPTS 32 /* number of interrupts */ #define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */ #define XCHAL_NUM_EXTINTERRUPTS 26 /* num of external interrupts */ #define XCHAL_INT_NLEVELS 6 /* number of interrupt levels (not including level zero) */ #define XCHAL_EXCM_LEVEL 3 /* level masked by PS.EXCM */ /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ /* Masks of interrupts at each interrupt level: */ #define XCHAL_INTLEVEL1_MASK 0x000637FF #define XCHAL_INTLEVEL2_MASK 0x00380000 #define XCHAL_INTLEVEL3_MASK 0x28C08800 #define XCHAL_INTLEVEL4_MASK 0x53000000 #define XCHAL_INTLEVEL5_MASK 0x84010000 #define XCHAL_INTLEVEL6_MASK 0x00000000 #define XCHAL_INTLEVEL7_MASK 0x00004000 /* Masks of interrupts at each range 1..n of interrupt levels: */ #define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x000637FF #define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x003E37FF #define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x28FEBFFF #define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x7BFEBFFF #define XCHAL_INTLEVEL5_ANDBELOW_MASK 0xFFFFBFFF #define XCHAL_INTLEVEL6_ANDBELOW_MASK 0xFFFFBFFF #define XCHAL_INTLEVEL7_ANDBELOW_MASK 0xFFFFFFFF /* Level of each interrupt: */ #define XCHAL_INT0_LEVEL 1 #define XCHAL_INT1_LEVEL 1 #define XCHAL_INT2_LEVEL 1 #define XCHAL_INT3_LEVEL 1 #define XCHAL_INT4_LEVEL 1 #define XCHAL_INT5_LEVEL 1 #define XCHAL_INT6_LEVEL 1 #define XCHAL_INT7_LEVEL 1 #define XCHAL_INT8_LEVEL 1 #define XCHAL_INT9_LEVEL 1 #define XCHAL_INT10_LEVEL 1 #define XCHAL_INT11_LEVEL 3 #define XCHAL_INT12_LEVEL 1 #define XCHAL_INT13_LEVEL 1 #define XCHAL_INT14_LEVEL 7 #define XCHAL_INT15_LEVEL 3 #define XCHAL_INT16_LEVEL 5 #define XCHAL_INT17_LEVEL 1 #define XCHAL_INT18_LEVEL 1 #define XCHAL_INT19_LEVEL 2 #define XCHAL_INT20_LEVEL 2 #define XCHAL_INT21_LEVEL 2 #define XCHAL_INT22_LEVEL 3 #define XCHAL_INT23_LEVEL 3 #define XCHAL_INT24_LEVEL 4 #define XCHAL_INT25_LEVEL 4 #define XCHAL_INT26_LEVEL 5 #define XCHAL_INT27_LEVEL 3 #define XCHAL_INT28_LEVEL 4 #define XCHAL_INT29_LEVEL 3 #define XCHAL_INT30_LEVEL 4 #define XCHAL_INT31_LEVEL 5 #define XCHAL_DEBUGLEVEL 6 /* debug interrupt level */ #define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */ #define XCHAL_NMILEVEL 7 /* NMI "level" (for use with * EXCSAVE/EPS/EPC_n, RFI n) */ /* Type of each interrupt: */ #define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT6_TYPE XTHAL_INTTYPE_TIMER #define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE #define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT10_TYPE XTHAL_INTTYPE_EXTERN_EDGE #define XCHAL_INT11_TYPE XTHAL_INTTYPE_PROFILING #define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT13_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT14_TYPE XTHAL_INTTYPE_NMI #define XCHAL_INT15_TYPE XTHAL_INTTYPE_TIMER #define XCHAL_INT16_TYPE XTHAL_INTTYPE_TIMER #define XCHAL_INT17_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT18_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT19_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT20_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT21_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT22_TYPE XTHAL_INTTYPE_EXTERN_EDGE #define XCHAL_INT23_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT24_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT25_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT26_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT27_TYPE XTHAL_INTTYPE_EXTERN_LEVEL #define XCHAL_INT28_TYPE XTHAL_INTTYPE_EXTERN_EDGE #define XCHAL_INT29_TYPE XTHAL_INTTYPE_SOFTWARE #define XCHAL_INT30_TYPE XTHAL_INTTYPE_EXTERN_EDGE #define XCHAL_INT31_TYPE XTHAL_INTTYPE_EXTERN_LEVEL /* Masks of interrupts for each type of interrupt: */ #define XCHAL_INTTYPE_MASK_UNCONFIGURED 0x00000000 #define XCHAL_INTTYPE_MASK_SOFTWARE 0x20000080 #define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x50400400 #define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x8FBE333F #define XCHAL_INTTYPE_MASK_TIMER 0x00018040 #define XCHAL_INTTYPE_MASK_NMI 0x00004000 #define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 #define XCHAL_INTTYPE_MASK_PROFILING 0x00000800 /* Interrupt numbers assigned to specific interrupt sources: */ #define XTHAL_TIMER_UNCONFIGURED -1 /* REVISIT: should be in hal.h */ #define XCHAL_TIMER0_INTERRUPT 6 /* CCOMPARE0 */ #define XCHAL_TIMER1_INTERRUPT 15 /* CCOMPARE1 */ #define XCHAL_TIMER2_INTERRUPT 16 /* CCOMPARE2 */ #define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED #define XCHAL_NMI_INTERRUPT 14 /* non-maskable interrupt */ #define XCHAL_PROFILING_INTERRUPT 11 /* profiling interrupt */ /* Interrupt numbers for levels at which only one interrupt is configured: */ #define XCHAL_INTLEVEL7_NUM 14 /* (There are many interrupts each at level(s) 1, 2, 3, 4, 5.) */ /* External interrupt mapping. * * These macros describe how Xtensa processor interrupt numbers * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) * map to external BInterrupt pins, for those interrupts * configured as external (level-triggered, edge-triggered, or NMI). * See the Xtensa processor databook for more details. */ /* Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number: */ #define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ #define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */ #define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */ #define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ #define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ #define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ #define XCHAL_EXTINT6_NUM 8 /* (intlevel 1) */ #define XCHAL_EXTINT7_NUM 9 /* (intlevel 1) */ #define XCHAL_EXTINT8_NUM 10 /* (intlevel 1) */ #define XCHAL_EXTINT9_NUM 12 /* (intlevel 1) */ #define XCHAL_EXTINT10_NUM 13 /* (intlevel 1) */ #define XCHAL_EXTINT11_NUM 14 /* (intlevel 7) */ #define XCHAL_EXTINT12_NUM 17 /* (intlevel 1) */ #define XCHAL_EXTINT13_NUM 18 /* (intlevel 1) */ #define XCHAL_EXTINT14_NUM 19 /* (intlevel 2) */ #define XCHAL_EXTINT15_NUM 20 /* (intlevel 2) */ #define XCHAL_EXTINT16_NUM 21 /* (intlevel 2) */ #define XCHAL_EXTINT17_NUM 22 /* (intlevel 3) */ #define XCHAL_EXTINT18_NUM 23 /* (intlevel 3) */ #define XCHAL_EXTINT19_NUM 24 /* (intlevel 4) */ #define XCHAL_EXTINT20_NUM 25 /* (intlevel 4) */ #define XCHAL_EXTINT21_NUM 26 /* (intlevel 5) */ #define XCHAL_EXTINT22_NUM 27 /* (intlevel 3) */ #define XCHAL_EXTINT23_NUM 28 /* (intlevel 4) */ #define XCHAL_EXTINT24_NUM 30 /* (intlevel 4) */ #define XCHAL_EXTINT25_NUM 31 /* (intlevel 5) */ /* EXTERNAL BInterrupt pin numbers mapped to each core interrupt number: */ #define XCHAL_INT0_EXTNUM 0 /* (intlevel 1) */ #define XCHAL_INT1_EXTNUM 1 /* (intlevel 1) */ #define XCHAL_INT2_EXTNUM 2 /* (intlevel 1) */ #define XCHAL_INT3_EXTNUM 3 /* (intlevel 1) */ #define XCHAL_INT4_EXTNUM 4 /* (intlevel 1) */ #define XCHAL_INT5_EXTNUM 5 /* (intlevel 1) */ #define XCHAL_INT8_EXTNUM 6 /* (intlevel 1) */ #define XCHAL_INT9_EXTNUM 7 /* (intlevel 1) */ #define XCHAL_INT10_EXTNUM 8 /* (intlevel 1) */ #define XCHAL_INT12_EXTNUM 9 /* (intlevel 1) */ #define XCHAL_INT13_EXTNUM 10 /* (intlevel 1) */ #define XCHAL_INT14_EXTNUM 11 /* (intlevel 7) */ #define XCHAL_INT17_EXTNUM 12 /* (intlevel 1) */ #define XCHAL_INT18_EXTNUM 13 /* (intlevel 1) */ #define XCHAL_INT19_EXTNUM 14 /* (intlevel 2) */ #define XCHAL_INT20_EXTNUM 15 /* (intlevel 2) */ #define XCHAL_INT21_EXTNUM 16 /* (intlevel 2) */ #define XCHAL_INT22_EXTNUM 17 /* (intlevel 3) */ #define XCHAL_INT23_EXTNUM 18 /* (intlevel 3) */ #define XCHAL_INT24_EXTNUM 19 /* (intlevel 4) */ #define XCHAL_INT25_EXTNUM 20 /* (intlevel 4) */ #define XCHAL_INT26_EXTNUM 21 /* (intlevel 5) */ #define XCHAL_INT27_EXTNUM 22 /* (intlevel 3) */ #define XCHAL_INT28_EXTNUM 23 /* (intlevel 4) */ #define XCHAL_INT30_EXTNUM 24 /* (intlevel 4) */ #define XCHAL_INT31_EXTNUM 25 /* (intlevel 5) */ /* Exceptions and Vectors ***************************************************/ #define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture * number: 1 == XEA1 (old) * 2 == XEA2 (new) * 0 == XEAX (extern) or TX */ #define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ #define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ #define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ #define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ #define XCHAL_HAVE_HALT 0 /* halt architecture option */ #define XCHAL_HAVE_BOOTLOADER 0 /* boot loader (for TX) */ #define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ #define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */ #define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */ #define XCHAL_VECBASE_RESET_VADDR 0x40000000 /* VECBASE reset value */ #define XCHAL_VECBASE_RESET_PADDR 0x40000000 #define XCHAL_RESET_VECBASE_OVERLAP 0 #define XCHAL_RESET_VECTOR0_VADDR 0x50000000 #define XCHAL_RESET_VECTOR0_PADDR 0x50000000 #define XCHAL_RESET_VECTOR1_VADDR 0x40000400 #define XCHAL_RESET_VECTOR1_PADDR 0x40000400 #define XCHAL_RESET_VECTOR_VADDR 0x40000400 #define XCHAL_RESET_VECTOR_PADDR 0x40000400 #define XCHAL_USER_VECOFS 0x00000340 #define XCHAL_USER_VECTOR_VADDR 0x40000340 #define XCHAL_USER_VECTOR_PADDR 0x40000340 #define XCHAL_KERNEL_VECOFS 0x00000300 #define XCHAL_KERNEL_VECTOR_VADDR 0x40000300 #define XCHAL_KERNEL_VECTOR_PADDR 0x40000300 #define XCHAL_DOUBLEEXC_VECOFS 0x000003C0 #define XCHAL_DOUBLEEXC_VECTOR_VADDR 0x400003C0 #define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x400003C0 #define XCHAL_WINDOW_OF4_VECOFS 0x00000000 #define XCHAL_WINDOW_UF4_VECOFS 0x00000040 #define XCHAL_WINDOW_OF8_VECOFS 0x00000080 #define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 #define XCHAL_WINDOW_OF12_VECOFS 0x00000100 #define XCHAL_WINDOW_UF12_VECOFS 0x00000140 #define XCHAL_WINDOW_VECTORS_VADDR 0x40000000 #define XCHAL_WINDOW_VECTORS_PADDR 0x40000000 #define XCHAL_INTLEVEL2_VECOFS 0x00000180 #define XCHAL_INTLEVEL2_VECTOR_VADDR 0x40000180 #define XCHAL_INTLEVEL2_VECTOR_PADDR 0x40000180 #define XCHAL_INTLEVEL3_VECOFS 0x000001C0 #define XCHAL_INTLEVEL3_VECTOR_VADDR 0x400001C0 #define XCHAL_INTLEVEL3_VECTOR_PADDR 0x400001C0 #define XCHAL_INTLEVEL4_VECOFS 0x00000200 #define XCHAL_INTLEVEL4_VECTOR_VADDR 0x40000200 #define XCHAL_INTLEVEL4_VECTOR_PADDR 0x40000200 #define XCHAL_INTLEVEL5_VECOFS 0x00000240 #define XCHAL_INTLEVEL5_VECTOR_VADDR 0x40000240 #define XCHAL_INTLEVEL5_VECTOR_PADDR 0x40000240 #define XCHAL_INTLEVEL6_VECOFS 0x00000280 #define XCHAL_INTLEVEL6_VECTOR_VADDR 0x40000280 #define XCHAL_INTLEVEL6_VECTOR_PADDR 0x40000280 #define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS #define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR #define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR #define XCHAL_NMI_VECOFS 0x000002C0 #define XCHAL_NMI_VECTOR_VADDR 0x400002C0 #define XCHAL_NMI_VECTOR_PADDR 0x400002C0 #define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS #define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR #define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR /* Debug Module *************************************************************/ /* Misc */ #define XCHAL_HAVE_DEBUG_ERI 1 /* ERI to debug module */ #define XCHAL_HAVE_DEBUG_APB 1 /* APB to debug module */ #define XCHAL_HAVE_DEBUG_JTAG 1 /* JTAG to debug module */ /* On-Chip Debug (OCD) */ #define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ #define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ #define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ #define XCHAL_HAVE_OCD_DIR_ARRAY 0 /* faster OCD option (to LX4) */ #define XCHAL_HAVE_OCD_LS32DDR 1 /* L32DDR/S32DDR (faster OCD) */ /* TRAX (in core) */ #define XCHAL_HAVE_TRAX 1 /* TRAX in debug module */ #define XCHAL_TRAX_MEM_SIZE 16384 /* TRAX memory size in bytes */ #define XCHAL_TRAX_MEM_SHAREABLE 1 /* start/end regs; ready sig. */ #define XCHAL_TRAX_ATB_WIDTH 32 /* ATB width (bits), 0=no ATB */ #define XCHAL_TRAX_TIME_WIDTH 0 /* timestamp bitwidth, 0=none */ /* Perf counters */ #define XCHAL_NUM_PERF_COUNTERS 2 /* performance counters */ /* MMU **********************************************************************/ #define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ #define XCHAL_HAVE_SPANNING_WAY 1 /* one way maps I+D 4GB vaddr */ #define XCHAL_SPANNING_WAY 0 /* TLB spanning way number */ #define XCHAL_HAVE_IDENTITY_MAP 1 /* vaddr == paddr always */ #define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ #define XCHAL_HAVE_MIMIC_CACHEATTR 1 /* region protection */ #define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ #define XCHAL_HAVE_PTP_MMU 0 /* full MMU (with page table * [autorefill] and protection) * usable for an MMU-based OS */ /* If none of the above last 4 are set, it's a custom TLB configuration. */ #define XCHAL_MMU_ASID_BITS 0 /* number of bits in ASIDs */ #define XCHAL_MMU_RINGS 1 /* number of rings (1..4) */ #define XCHAL_MMU_RING_BITS 0 /* num of bits in RING field */ #endif /* !XCHAL_HAL_NON_PRIVILEGED_ONLY */ #endif /* __ARCH_XTENSA_INCLUDE_ESP32_CORE_ISA_H */