/****************************************************************************
 * boards/arm/max326xx/max32660-evsys/src/max326_spi.c
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <stdint.h>
#include <stdbool.h>
#include <errno.h>
#include <debug.h>

#include <nuttx/spi/spi.h>
#include <arch/board/board.h>

#include "arm_internal.h"
#include "max326_spim.h"

#include "max32660-evsys.h"

#ifdef CONFIG_MAX326XX_HAVE_SPIM

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: max326_spidev_initialize
 *
 * Description:
 *   Called to configure SPI chip select GPIO pins for the MAX3660-EVSYS
 *   board.
 *
 ****************************************************************************/

void max326_spidev_initialize(void)
{
#ifdef CONFIG_MAX326XX_SPIM0
#endif
#ifdef CONFIG_MAX326XX_SPIM1
#endif
}

/****************************************************************************
 * Name:  max326_spi0/1select and max326_spi0/1status
 *
 * Description:
 *   The external functions, max326_spi0/1select and max326_spi0/1status must
 *   be provided by board-specific logic.
 *   They are implementations of the select and status methods of the SPI
 *   interface defined by struct spi_ops_s (see include/nuttx/spi/spi.h).
 *   All other methods (including max326_spibus_initialize())
 *   are provided by common STM32 logic.
 *   To use this common SPI logic on your board:
 *
 *   1. Provide logic in max326_boardinitialize() to configure SPI chip
 *      select pins.
 *   2. Provide max326_spi0/1select() and max326_spi0/1status() functions in
 *      your board-specific logic.
 *      These functions will perform chip selection and status operations
 *      using GPIOs in the way your board is configured.
 *   3. Add a calls to max326_spibus_initialize() in your low level
 *      application initialization logic
 *   4. The handle returned by max326_spibus_initialize() may then be used to
 *      bind the SPI driver to higher level logic (e.g., calling
 *      mmcsd_spislotinitialize(), for example, will bind the SPI driver to
 *      the SPI MMC/SD driver).
 *
 ****************************************************************************/

#ifdef CONFIG_MAX326XX_SPIM0
void max326_spi0select(struct spi_dev_s *dev, uint32_t devid,
                       bool selected)
{
  spiinfo("devid: %d CS: %s\n", (int)devid,
          selected ? "assert" : "de-assert");
}

uint8_t max326_spi0status(struct spi_dev_s *dev, uint32_t devid)
{
  return 0;
}
#endif

#ifdef CONFIG_MAX326XX_SPIM1
void max326_spi1select(struct spi_dev_s *dev, uint32_t devid,
                       bool selected)
{
  spiinfo("devid: %d CS: %s\n", (int)devid,
          selected ? "assert" : "de-assert");
}

uint8_t max326_spi1status(struct spi_dev_s *dev, uint32_t devid)
{
  return 0;
}
#endif

/****************************************************************************
 * Name: max326_spi0/1cmddata
 *
 * Description:
 *   Set or clear the SH1101A A0 or SD1306 D/C n bit to select data (true)
 *   or command (false). This function must be provided by platform-specific
 *   logic. This is an implementation of the cmddata method of the SPI
 *   interface defined by struct spi_ops_s (see include/nuttx/spi/spi.h).
 *
 * Input Parameters:
 *
 *   spi - SPI device that controls the bus the device that requires the CMD/
 *         DATA selection.
 *   devid - If there are multiple devices on the bus, this selects which one
 *         to select cmd or data.  NOTE:  This design restricts, for example,
 *         one one SPI display per SPI bus.
 *   cmd - true: select command; false: select data
 *
 * Returned Value:
 *   None
 *
 ****************************************************************************/

#ifdef CONFIG_SPI_CMDDATA
#ifdef CONFIG_MAX326XX_SPIM0
int max326_spi0cmddata(struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
  return -ENODEV;
}
#endif

#ifdef CONFIG_MAX326XX_SPIM1
int max326_spi1cmddata(struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
  return -ENODEV;
}
#endif

#ifdef CONFIG_STM32_SPI3
int max326_spi3cmddata(struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
  return -ENODEV;
}
#endif
#endif /* CONFIG_SPI_CMDDATA */
#endif /* CONFIG_MAX326XX_HAVE_SPIM */