/**************************************************************************** * arch/xtensa/src/common/arm_schedulesigaction.c * * Copyright (C) 2016-2017 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include "sched/sched.h" #include "xtensa.h" #include "irq/irq.h" #ifndef CONFIG_DISABLE_SIGNALS /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: up_schedule_sigaction * * Description: * This function is called by the OS when one or more * signal handling actions have been queued for execution. * The architecture specific code must configure things so * that the 'sigdeliver' callback is executed on the thread * specified by 'tcb' as soon as possible. * * This function may be called from interrupt handling logic. * * This operation should not cause the task to be unblocked * nor should it cause any immediate execution of sigdeliver. * Typically, a few cases need to be considered: * * (1) This function may be called from an interrupt handler * During interrupt processing, all xcptcontext structures * should be valid for all tasks. That structure should * be modified to invoke sigdeliver() either on return * from (this) interrupt or on some subsequent context * switch to the recipient task. * (2) If not in an interrupt handler and the tcb is NOT * the currently executing task, then again just modify * the saved xcptcontext structure for the recipient * task so it will invoke sigdeliver when that task is * later resumed. * (3) If not in an interrupt handler and the tcb IS the * currently executing task -- just call the signal * handler now. * ****************************************************************************/ #ifndef CONFIG_SMP void up_schedule_sigaction(struct tcb_s *tcb, sig_deliver_t sigdeliver) { irqstate_t flags; sinfo("tcb=0x%p sigdeliver=0x%p\n", tcb, sigdeliver); /* Make sure that interrupts are disabled */ flags = enter_critical_section(); /* Refuse to handle nested signal actions */ if (!tcb->xcp.sigdeliver) { /* First, handle some special cases when the signal is being delivered * to the currently executing task. */ sinfo("rtcb=0x%p CURRENT_REGS=0x%p\n", this_task(), CURRENT_REGS); if (tcb == this_task()) { /* CASE 1: We are not in an interrupt handler and a task is * signalling itself for some reason. */ if (!CURRENT_REGS) { /* In this case just deliver the signal now. */ sigdeliver(tcb); } /* CASE 2: We are in an interrupt handler AND the interrupted * task is the same as the one that must receive the signal, then * we will have to modify the return state as well as the state * in the TCB. * * Hmmm... there looks like a latent bug here: The following logic * would fail in the strange case where we are in an interrupt * handler, the thread is signalling itself, but a context switch * to another task has occurred so that CURRENT_REGS does not * refer to the thread of this_task()! */ else { /* Save the return pc and ps. These will be restored by the * signal trampoline after the signals have been delivered. * * NOTE: that hi-priority interrupts are not disabled. */ tcb->xcp.sigdeliver = sigdeliver; tcb->xcp.saved_pc = CURRENT_REGS[REG_PC]; tcb->xcp.saved_ps = CURRENT_REGS[REG_PS]; /* Then set up to vector to the trampoline with interrupts * disabled */ CURRENT_REGS[REG_PC] = (uint32_t)_xtensa_sig_trampoline; #ifdef __XTENSA_CALL0_ABI__ CURRENT_REGS[REG_PS] = (uint32_t)(PS_INTLEVEL(XCHAL_EXCM_LEVEL) | PS_UM); #else CURRENT_REGS[REG_PS] = (uint32_t)(PS_INTLEVEL(XCHAL_EXCM_LEVEL) | PS_UM | PS_WOE); #endif /* And make sure that the saved context in the TCB is the same * as the interrupt return context. */ xtensa_savestate(tcb->xcp.regs); } } /* Otherwise, we are (1) signaling a task is not running from an * interrupt handler or (2) we are not in an interrupt handler and the * running task is signalling some non-running task. */ else { /* Save the return pc and ps. These will be restored by the * signal trampoline after the signals have been delivered. * * NOTE: that hi-priority interrupts are not disabled. */ tcb->xcp.sigdeliver = sigdeliver; tcb->xcp.saved_pc = CURRENT_REGS[REG_PC]; tcb->xcp.saved_ps = CURRENT_REGS[REG_PS]; /* Then set up to vector to the trampoline with interrupts * disabled */ tcb->xcp.regs[REG_PC] = (uint32_t)_xtensa_sig_trampoline; #ifdef __XTENSA_CALL0_ABI__ tcb->xcp.regs[REG_PS] = (uint32_t)(PS_INTLEVEL(XCHAL_EXCM_LEVEL) | PS_UM); #else tcb->xcp.regs[REG_PS] = (uint32_t)(PS_INTLEVEL(XCHAL_EXCM_LEVEL) | PS_UM | PS_WOE); #endif } } leave_critical_section(flags); } #endif /* !CONFIG_SMP */ #ifdef CONFIG_SMP void up_schedule_sigaction(struct tcb_s *tcb, sig_deliver_t sigdeliver) { irqstate_t flags; int cpu; int me; sinfo("tcb=0x%p sigdeliver=0x%p\n", tcb, sigdeliver); /* Make sure that interrupts are disabled */ flags = enter_critical_section(); /* Refuse to handle nested signal actions */ if (!tcb->xcp.sigdeliver) { /* First, handle some special cases when the signal is being delivered * to task that is currently executing on any CPU. */ sinfo("rtcb=0x%p CURRENT_REGS=0x%p\n", this_task(), CURRENT_REGS); me = this_cpu(); cpu = tcb->cpu; if (tcb->task_state == TSTATE_TASK_RUNNING) { /* CASE 1: We are not in an interrupt handler and a task is * signalling itself for some reason. */ if (cpu == me && !CURRENT_REGS) { /* In this case just deliver the signal now. */ sigdeliver(tcb); } /* CASE 2: The task that needs to receive the signal is running. * This could happen if the task is running on another CPU OR if * we are in an interrupt handler and the task is running on this * CPU. In the former case, we will have to PAUSE the other CPU * first. But in either case, we will have to modify the return * state as well as the state in the TCB. * * Hmmm... there looks like a latent bug here: The following logic * would fail in the strange case where we are in an interrupt * handler, the thread is signalling itself, but a context switch * to another task has occurred so that CURRENT_REGS does not * refer to the thread of this_task()! */ else { /* If we signalling a task running on the other CPU, we have * to PAUSE the other CPU. */ if (cpu != me) { up_cpu_pause(cpu); } /* Save the return pc and ps. These will be restored by the * signal trampoline after the signals have been delivered. * * NOTE: that hi-priority interrupts are not disabled. */ tcb->xcp.sigdeliver = sigdeliver; tcb->xcp.saved_pc = CURRENT_REGS[REG_PC]; tcb->xcp.saved_ps = CURRENT_REGS[REG_PS]; /* Increment the IRQ lock count so that when the task is restarted, * it will hold the IRQ spinlock. */ DEBUGASSERT(tcb->irqcount < INT16_MAX); tcb->irqcount++; /* Handle a possible race condition where the TCB was suspended * just before we paused the other CPU. */ if (tcb->task_state != TSTATE_TASK_RUNNING) { tcb->xcp.regs[REG_PC] = (uint32_t)_xtensa_sig_trampoline; #ifdef __XTENSA_CALL0_ABI__ tcb->xcp.regs[REG_PS] = (uint32_t)(PS_INTLEVEL(XCHAL_EXCM_LEVEL) | PS_UM); #else tcb->xcp.regs[REG_PS] = (uint32_t)(PS_INTLEVEL(XCHAL_EXCM_LEVEL) | PS_UM | PS_WOE); #endif } else { /* Then set up to vector to the trampoline with interrupts * disabled */ CURRENT_REGS[REG_PC] = (uint32_t)_xtensa_sig_trampoline; #ifdef __XTENSA_CALL0_ABI__ CURRENT_REGS[REG_PS] = (uint32_t)(PS_INTLEVEL(XCHAL_EXCM_LEVEL) | PS_UM); #else CURRENT_REGS[REG_PS] = (uint32_t)(PS_INTLEVEL(XCHAL_EXCM_LEVEL) | PS_UM | PS_WOE); #endif /* In an SMP configuration, the interrupt disable logic also * involves spinlocks that are configured per the TCB irqcount * field. This is logically equivalent to enter_critical_section(). * The matching call to leave_critical_section() will be * performed in up_sigdeliver(). */ spin_setbit(&g_cpu_irqset, cpu, &g_cpu_irqsetlock, &g_cpu_irqlock); /* And make sure that the saved context in the TCB is the same * as the interrupt return context. */ xtensa_savestate(tcb->xcp.regs); } /* RESUME the other CPU if it was PAUSED */ if (cpu != me) { up_cpu_pause(cpu); } } } /* Otherwise, we are (1) signaling a task is not running from an * interrupt handler or (2) we are not in an interrupt handler and the * running task is signalling some other non-running task. */ else { /* Save the return pc and ps. These will be restored by the * signal trampoline after the signals have been delivered. * * NOTE: that hi-priority interrupts are not disabled. */ tcb->xcp.sigdeliver = sigdeliver; tcb->xcp.saved_pc = CURRENT_REGS[REG_PC]; tcb->xcp.saved_ps = CURRENT_REGS[REG_PS]; /* Increment the IRQ lock count so that when the task is restarted, * it will hold the IRQ spinlock. */ DEBUGASSERT(tcb->irqcount < INT16_MAX); tcb->irqcount++; /* Then set up to vector to the trampoline with interrupts * disabled */ tcb->xcp.regs[REG_PC] = (uint32_t)_xtensa_sig_trampoline; #ifdef __XTENSA_CALL0_ABI__ tcb->xcp.regs[REG_PS] = (uint32_t)(PS_INTLEVEL(XCHAL_EXCM_LEVEL) | PS_UM); #else tcb->xcp.regs[REG_PS] = (uint32_t)(PS_INTLEVEL(XCHAL_EXCM_LEVEL) | PS_UM | PS_WOE); #endif } } leave_critical_section(flags); } #endif /* CONFIG_SMP */ #endif /* !CONFIG_DISABLE_SIGNALS */