#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

if ARCH_BOARD_SAMA5D2_XULT

choice
	prompt "CPU Frequency"
	default SAMA5D2XULT_396MHZ

config SAMA5D2XULT_384MHZ
	bool "384 MHz"

config SAMA5D2XULT_396MHZ
	bool "396 MHz"

config SAMA5D2XULT_498MHZ
	bool "498 MHz"

config SAMA5D2XULT_528MHZ
	bool "528 MHz"

endchoice # CPU Frequency

config SAMA5D2XULT_USBHOST_STACKSIZE
	int "USB host waiter stack size"
	default 1536 if USBHOST_HUB
	default 1024 if !USBHOST_HUB
	depends on USBHOST

config SAMA5D2XULT_USBHOST_PRIO
	int "USB host waiter task priority"
	default 100
	depends on USBHOST

config SAMA5_SDMMC
	bool "enable SDMMC controller"
	default SAMA5_HAVE_SDMMC
	select SDIO_DMA
	select SCHED_HPWORK
	select MMCSD
	select MMCSD_SDIO
	select SDIO_BLOCKSETUP
	select ARCH_HAVE_SDIO
	select SAMA5_SDMMC_DMA
	---help---
		Enable SD Card interface SDMMC0. Selects SAMA5_SDMMC SAMA5_SDMMC0 SAMA5_SDMMC_DMA SDIO_DMA SCHED_HPWORK SDIO_BLOCKSETUP

config SAMA5_SDMMC0
	bool "Enable SDMMC0 (built-in eMMC)"
	default !SAMA5_SDMMC
	depends on SAMA5_SDMMC

config SAMA5_SDMMC0_SIZE
	int "SDMMC0 size in bytes"
	default 4294967296
	depends on SAMA5_SDMMC0
	---help---
	Size of eMMC flash in bytes. Default: 4GB

config SAMA5D27_SDMMC0_MOUNT
	bool "Mount SDMMC0 at startup"
	default n
	depends on SAMA5_SDMMC0

config SAMA5D27_SDMMC0_MOUNT_BLKDEV
	string "SDMMC0 block device name"
	default "mmc0"
	depends on SAMA5_SDMMC0

config SAMA5D27_SDMMC0_MOUNT_MOUNTPOINT
	string "SDMMC0 mountpoint"
	default "/mnt/sdmmc0"
	depends on SAMA5_SDMMC0

config SAMA5D27_SDMMC0_MOUNT_FSTYPE
	string "SDMMC0 file system type"
	default "vfat"
	depends on SAMA5_SDMMC0

config SAMA5_SDMMC0_WIDTH_D1_D8
	bool "SDMMC0 data bus width 8 bits"
	default y
	depends on SAMA5_SDMMC0

config SAMA5_SDMMC1
	bool "Enable SDMMC1"
	default SAMA5_SDMMC
	select SAMA5_SDMMC1_WIDTH_D1_D4
	depends on SAMA5_SDMMC

config SAMA5_SDMMC1_SIZE
	int "SDMMC1 size in bytes"
	default 1073741824
	depends on SAMA5_SDMMC1
	---help---
		Size of SD Card in bytes. Default: 16GB

config SAMA5D27_SDMMC1_MOUNT
	bool "Mount SDMMC1 at startup"
	default n
	depends on SAMA5_SDMMC1

config SAMA5D27_SDMMC1_MOUNT_BLKDEV
	string "SDMMC1 block device name"
	default "mmc1"
	depends on SAMA5_SDMMC1

config SAMA5D27_SDMMC1_MOUNT_MOUNTPOINT
	string "SDMMC1 mountpoint"
	default "/mnt/sdmmc1"
	depends on SAMA5_SDMMC1

config SAMA5D27_SDMMC1_MOUNT_FSTYPE
	string "SDMMC1 file system type"
	default "vfat"
	depends on SAMA5_SDMMC1

config MMCSD_HAVE_CARDDETECT
	bool "SDMMC1 card detect"
	default y
	depends on SAMA5_SDMMC1

config SAMA5_SDMMC1_WIDTH_D1_D4
	bool "SDMMC1 data bus width 4 bits"
	default y
	depends on SAMA5_SDMMC1

config SAMA5_QSPI0_SIZE
	int "QSPI0 memory size in bytes"
	default 1073741824
	depends on SAMA5_QSPI0
	---help---
		Size of QSPI0 memory mapped area in bytes. Default: 1GB

config SAMA5_QSPI1_SIZE
	int "QSPI1 memory size in bytes"
	default 1073741824
	depends on SAMA5_QSPI1
	---help---
		Size of QSPI1 memory mapped area in bytes. Default: 1GB

endif # ARCH_BOARD_SAMA5D2_XULT